Energy Analysis of Bare Electrodynamic Tethers

The design of an electrodynamic tether is a complex task that involves the control of dynamic instabilities, optimization of the generated power (or the descent time in deorbiting missions), and minimization of the tether mass. The electrodynamic forces on an electrodynamic tether are responsible for variations in the mechanical energy of the tethered system and can also drive the system to dynamic instability. Energy sources and sinks in this system include the following: 1) ionospheric impedance, 2) the potential drop at the cathodic contactor, 3) ohmic losses in the tether, 4) the corotational plasma electric field, and 5) generated power and/or 6) input power. The analysis of each of these energy components, or bricks, establishes parameters that are useful tools for tether design. In this study, the nondimensional parameters that govern the orbital energy variation, dynamic instability, and power generation were characterized, and their mutual interdependence was established. A space-debris mitigation mission was taken as an example of this approach for the assessment of tether performance. Numerical simulations using a dumbbell model for tether dynamics, the International Geomagnetic Reference Field for the geomagnetic field, and the International Reference Ionosphere for the ionosphere were performed to test the analytical approach. The results obtained herein stress the close relationships that exist among the velocity of descent, dynamic stability, and generated power. An optimal tether design requires a detailed tradeoff among these performances in a real-world scenario.

Ventilation system design and large scale fire tests

The design, construction and operation of the tunnels of M-30, the major ring road in the city of Madrid (Spain), represent a very interesting project in wich a wide variety of situations -geometrical, topographical, etc.- had to be covered, in variable conditions of traffic. For that reasons, the M-30 project is a remarkable technical challenge, which, after its completion, turned into an international reference. From the "design for safety" perspective, a holistic approach has been used to deal with new technologies, integration of systems and development of the procedures to reach the maximum level. However, one of the primary goals has been to achieve reasonable homogeneity characteristics which can permit operate a netword of tunels as one only infraestructure. In the case of the ventilation system the mentioned goals have implied innovative solutions and coordination efforts of great interest. Consequently, this paper describes the principal ideas underlying the conceptual solution developed focusing on the principal peculiarities of the project.

Re-Ocupación y/o Re-Construcción de estructuras urbanas en desuso y su conexión con el espacio público y el paisaje

Los nuevos comportamientos urbanos nos permiten observar cada vez con más frecuencia en nuestras calles y plazas realidades que siempre habíamos considerado domésticas. Al contrario también pasa, todos los días vivimos en nuestras casas situaciones que implican relacionarnos con personas que no son de nuestro núcleo familiar. El diseño doméstico de nuestras ciudades y el urbanismo del diseño de interiores parecen herramientas oportunas en el mundo que nos ha tocado vivir. Esto nos lleva a pensar que los espacios públicos y privados son términos simplificados, definidos en base a conceptos de propiedad para organizar la ciudad. En cambio, sus usos y vivencias, su gestión y sus comportamientos se han complejizado, distorsionando la terminología convencional hasta hacerla obsoleta. En este contexto, considerado también el marco socioeconómico actual, surgen las “acciones de abajo a arriba” como nuevo paradigma o modelo de renovación urbana, que entienden la involucración del ciudadano como parte activa en el proceso de construcción de la urbe desde la misma gestación del proyecto, frente a las acciones habituales que consideran al usuario como mero receptor de las propuestas. Un ciudadano que parece estar cada vez más radicalizado y una administración que parece asustarse ante el desconcierto que el acercamiento al ciudadano puede acarrear, han ocasionado por un lado, espacios “gueto” de carácter casi anárquico y, por el otro lado, lugares tan institucionalizados que derivan en espacios asociados a la administración y ajenos al ciudadano. Por ello, se considera imprescindible la colaboración entre ambos poderes. De acuerdo con el discurso que precede, dentro de un marco comparativo, se estudian 5 supuestos seleccionados de las ciudades Madrid y Zaragoza. Madrid porque es referencia nacional e internacional en el desarrollo urbano a través de procesos ‘abajo arriba’. Zaragoza porque es una ciudad ‘media’ que históricamente no se ha definido por estrategias urbanas claras, ya sean de carácter social o institucional. Sin embargo, en el momento actual se pueden identificar planteamientos relacionados con la recuperación de construcciones y espacios vacantes que pueden ser determinantes a la hora de alcanzar equilibrios con los intensos procesos institucionales acaecidos en las dos últimas décadas. De los procesos urbanos registrados en cada lugar, desarrollados en construcciones y espacios vacantes, he seleccionado: Construcciones Vacantes Madrid |Tabacalera de Lavapiés Zaragoza | Antiguo I.E.S. Luis Buñuel y antiguo Convento de Mínimos Espacios Vacantes Madrid | Campo de Cebada [solar] Zaragoza | Patio ‘antiguo I.E.S. Luis Buñuel [espacio libre] y plaza Eduardo Ibarra [espacio libre] El proyecto de investigación ha partido de las hipótesis de partida que siguen: UNA… Las ‘acciones de abajo arriba’ o renovación desde abajo no tienen cabida como elementos urbanos aislados sino conectados entre sí, posibilitando la producción de sinergias y la construcción de la ciudad; pudiendo ser consideradas acciones de desarrollo y enlace urbano, pues su objetivo es convertirse en motores del espacio público. Cuestión que es aplicable al resto de los procesos o acciones urbanas [‘horizontales’ o ‘institucionales’] DOS… La capacidad de adaptación manifestada por las ‘acciones de abajo arriba’ implica un marco ideológico de referencia asociado a la importancia de la construcción con mínimos recursos [Re-ocupación y/o Re- Construcción de estructuras urbanas en desuso] en los procesos urbanos descritos, como vía para comprender los concepto sostenibilidad y calidad figurativa de lo construido. Cuestión que es aplicable a la recuperación de aquellos aspectos de la arquitectura que la convierten en necesaria para la sociedad. Y tiene como objetivo: Identificar modelos de sostenibilidad urbana como una estrategia que va de lo individual a lo colectivo y que se transmite fundamentalmente con la acción, mezclando la innovación y la tecnología en múltiples ámbitos, utilizando los recursos naturales e intelectuales de una manera eficiente y entendiendo la inteligencia humana y sobre todo la inteligencia colectiva, como principio y justificación. Se han analizado los siguientes aspectos: sociales [participación ciudadana e implicación de la administración pública], urbanos [conexiones con otros colectivos o espacios urbanos / transformaciones urbanas a través de los procesos de gestión utilizados], constructivos [materiales utilizados en la re-construcción de construcciones y espacios vacantes / sistemas constructivos utilizados] y los relacionados con la sostenibilidad [sostenibilidad económica / sostenibilidad de mantenimiento / sostenibilidad funcional / inteligencia colectiva] El estudio de los aspectos considerados se ha desarrollado con las herramientas metodológicas siguientes: Entrevistas abiertas a expertos: se han obtenido respuestas de 25 personas expertas [5 por cada espacio o construcción vacante] relacionadas con las acciones urbanas sostenibles, la cultura y las relaciones sociales, y que también conocen los lugares y su entorno desde los puntos de vista urbano y construido. Son ‘tipos ideales’ asociados a uno de los cinco poderes que se manifiestan en la ciudad: el poder educativo [la universidad], el poder creativo [la cultura], el poder administrativo [la política], el poder empresarial [la empresa privada] y los usuarios [un usuario activo y representativo de cada lugar elegido que haya intervenido en la gestación del proceso]. Han sido personas que conocían el tejido social y urbano de la ciudad de Zaragoza y Madrid, ya que la herramienta ‘entrevista abierta a expertos’, recoge datos y opiniones planteadas en las construcciones y espacios vacantes ubicados en Zaragoza y Madrid. Entrevistas cerradas a usuarios: como la población de usuarios que se somete a la investigación es infinita o muy grande, resulta imposible o inconveniente realizar la obtención de los datos sobre todos aquellos elementos que la forman. Por lo tanto, he decidido estudiar sólo una parte de la población que denomino ‘tipos ideales’, obteniendo respuestas de 150 usuarios [30 personas por cada espacio o construcción vacante]. La selección de grupos de personas entrevistadas, debe permitir que los resultados sean representativos de la población total de usuarios. Además, la elección de ‘tipos ideales’ se ha identificado con los vecinos de los núcleos urbanos [o barrios] en los que se ubican las construcciones o espacios vacantes analizados. Observación estructurada: recoger información a través de la observación me ha permitido conocer las actuaciones y comportamientos de los ciudadanos en el medio urbano. Esto ha facilitado el estudio del medio a nivel práctico, valorando el uso que la sociedad da a las construcciones y a los espacios vacantes analizados. Es importante posicionar la estrategia en relación con el tema de investigación propuesto. Una estrategia que dibuje un panorama plural, desarrollado a través de herramientas sociales y constructivas que permitan que la arquitectura hable de cosas parecidas a lo que interesa a la ciudadanía. Para ello, propuse un catálogo de herramientas arquitectónicas que han permitido evaluar todas las propuestas. Un contexto de estrategias comunes que han descrito con los mismos códigos las distintas actuaciones analizadas. Estas herramientas tocan diferentes campos de interés. Desde las partes más tectónicas y constructivas, hasta las más ligadas con el desarrollo urbanístico y social. Acciones de participación colectiva: Experiencias o laboratorios urbanos participados por los alumnos del grado de arquitectura de la UNIZAR y los agentes sociales. Las acciones son una herramienta propositiva. Investigar y analizar proponiendo ha permitido que el análisis del contexto pueda llegar a capas de mucha más profundidad. No se ha trabajado estableciendo jerarquías de profesores y alumnos, sino que se ha intentado posibilitar la conexión de distintos agentes que trabajan coordinadamente durante el tiempo que han durado las acciones. Por un lado esto ha permite que cada integrante haya aportado al grupo lo que mejor sabe hacer y de la misma manera, que cada uno pueda aprender aquello de lo que tenga más ganas… y reflexionar sobre determinados aspectos objeto del análisis. Una vez interpretados los resultados, obtenidos a través de las herramientas metodológicas referenciadas, se ha concluido lo que sigue: Respecto de la Hipótesis de partida UNO LAS ACCIONES ‘ABAJO ARRIBA’ han revelado que no se puede entender ningún proceso de gestión urbana fuera de la participación ciudadana. El ‘ESPACIO LIBRE’ de una ciudad necesita lugares de autogestión, espacios de cogestión, movimientos de ‘arriba abajo’ y también modelos que todavía no sabemos ni que existen. LAS ACCIONES INSTITUCIONALES ‘ARRIBA ABAJO’ han demostrado que no han presentado permeabilidad ni relación con las circulaciones de entorno. Tampoco han tenido en cuenta a otras muchas personas, ‘usuarios productores’, a las que les interesan los procesos de búsqueda y las fórmulas de conexión más interactivas. Respecto de la hipótesis de partida DOS LAS ACCIONES ‘ABAJO ARRIBA’ han revelado que el ‘derecho a la ciudad’, paradigma defendido por Lefebvre desde el cual se piensa el urbanismo ciudadano, en estos supuestos podría entenderse como el ‘derecho a la infraestructura’. El ESPACIO LIBRE es infraestructura y se quiere para infraestructurar los derechos de cada uno. Y aunque también es verdad que estas acciones son simples destellos, han hecho visible otro paradigma de gestión y propuesta urbana que puede ser predominante en un futuro próximo. LAS ACCIONES INSTITUCIONALES ‘ARRIBA ABAJO’ han revelado que las intervenciones estuvieron enfocadas únicamente a la resolución de los procesos constructivos y a la incorporación del programa como un dato ‘problema’ que era necesario resolver para evitar la afección al diseño. ABSTRACT The new urban ways of behaviour let us watch more and more frequently in our streets and squares, realities that we had always considered as domestic. This also happens the other way round. Every day we have to go through situations at home which imply relationships with people who don’t belong to our family circle. The domestic design of our cities and the urban planning of indoor design seem to be adequate tools in the world we have to live in. This leads us to think that public and private spaces are simplified terms, defined according to concepts of property in order to organise the city. On the other hand, its uses and the experiences of people, its management and ways of behaviour is now more complex, changing the conventional terminology that has become outdated. In this context, ‘bottom-up’ actions arise as a new paradigm or model of urban renewal. These actions consider the active role of social participation in the process of building up the city from the very beginning, in comparison with the former way of acting that considered the user as mere receptor of the proposals. A citizen who seems to become more and more radical, and an administration that seems to be afraid of the unknown, have created both almost anarchic ghetto spaces and, on the other hand, spaces which have been so institutionalised that derive into areas associated to the administration but alienated from the citizen. For this reason, cowork of both forces is considered as crucial. In accordance with the above mentioned ideas and within a comparative framework, five situations chosen from the cities of Madrid and Zaragoza are studied. Madrid because is a national and international reference in urban development that uses “bottom-up” processes. Zaragoza because is a “medium-size” city that, historically, has not been defined by clear social or institutional urban strategies. Nevertheless, at the present time we can identify approaches on the recovery of constructions and empty areas that may be determining for reaching a balance with the intense institutional processes that have taken place in the two last decades. From the urban processes registered in every place and developed in vacant areas and constructions, I have chosen: Vacant constructions Madrid | Lavapiés Tobacco Factory Zaragoza | Old Secondary School Luis Buñuel and old Convent of the Minimos Vacant areas Madrid | Campo de Cebada [non-built site]. Zaragoza | Old courtyard of the secondary school and Eduardo Ibarra square [free space] The research project has been issued from the following starting hypotheses: ONE… “Bottom-up actions” or renewal from below have no place as isolated urban elements but as connected parts that can produce synergies and the construction of the city, and that can also be considered as actions producing urban development and links. This can also be applied to the rest of urban processes or actions [‘horizontal’ or ‘institutional’]. TWO… The capacity of adaptation shown by “bottom-up actions” implies an ideological framework of reference which is related to the importance of construction with minimal resources (re-occupation and/or reconstruction of urban structures in disuse) in the above mentioned urban processes, as a way for understanding the concepts of sustainability and the representational quality of what has been constructed. This can also be applied to the recovery of those architectural aspects that make architecture necessary for society. And its objective is: Identify models of urban sustainability as a strategy going from the individual to the collective, which are mainly transferred by action and that mix innovation and technology in many fields. Models that use natural and intellectual resources in an efficient way, and understand human intelligence and, above all, collective intelligence, as principle and justification. The following aspects have been analysed: social [civic participation and involvement of the public Administration], urban [connections with other collectives or urban spaces / urban transformation by the processes of administration used], constructive [materials used for the re-construction of empty spaces / construction systems used] and those focusing on sustainability [economic sustainability /maintenance sustainability /functional sustainability / collective intelligence]. For researching into the above mentioned aspects, the following methodological tools have been developed: Open interviews with experts: answers from 25 experts have been obtained [five for every vacant space or empty construction] on sustainable urban actions, culture and social relations, who also know the places and their environment from an urban and constructive point of view. These are “ideal types” linked to one of the five powers acting in the city: the educational power [University], the creative power [culture], the administration power [politics], the corporate power [private companies] and the users [an active and representative user for every place selected during the establishment of the process]. They were people who knew the social and urban fabric of Zaragoza and Madrid, since the “open interview for experts” tool collects data and points of view set out in vacant constructions and spaces of Zaragoza and Madrid. Close interviews with users: as the number of users targeted for the research is very big or infinite, it is impossible or inconvenient to get data from all its constituent parts. Therefore, I have decided to research into the part of the population that I call “ideal types”, obtaining answers from 150 users [30 people for every empty space or construction]. The selection of the groups of people interviewed must produce results which are representative of the total population of users. Furthermore, the election of “ideal types” has been identified with the inhabitants of urban areas [or city districts] in which the vacant spaces or constructions analysed are located. A structured observation: I have known the actions and ways of behaving of the citizens in the urban environment by means of collecting information after observation. Therefore, the practical research into the target environment has been easier by valuing the use that society gives to the empty constructions and spaces analysed. It is important to position the strategy with respect to the research subject proposed. It involves a strategy able to get an overview of a plural landscape, developed by social and constructive tools, allowing architecture to talk about topics which are interesting for city dwellers. Therefore, I proposed a set of architectural tools to evaluate all the proposals. A context of common strategies describing the different actions analysed by using the same codes. These tools focus on different fields of interests, from the most tectonic and constructive parts, to the most related to urban and social development. Actions on collective participation: experiences or urban laboratories shared by the students of architecture of the University of Zaragoza and social agents. The actions are a proactive tool. Researching and analysing by means of proposing, has allowed me to analyse the context and much deeper layers. This work has not been done by establishing ranks of professors and student, but trying to get an interaction between the different agents who work in close coordination during the implementation of the actions. This has allowed every agent to contribute the group what they do the best, and also every individual has had the possibility to learn what s/he prefers…, thinking about the different aspects targeted by the analysis. Once the different methodological tools have been interpreted, this is the conclusion: With regard to the initial hypothesis ONE “BOTTOM-UP” ACTIONS have proven that no process of urban management can be understood outside civic participation. The “FREE SPACE” of a city needs self-managed places, co-managed spaces, “up-bottom” movements, and also models whose existence is still ignored. “UP-BOTTOM” INSTITUTIONAL ACTIONS have proven that they have not presented neither permeability nor relation with local ideas. They have also disregarded many other people, the “usersproducers”, who are interested in the most interactive means of searching and connecting processes. With regard to the initial hypothesis TWO Under these premises, “BOTTOM-UP” ACTIONS have shown that the “right to the city”, a paradigm defended by Lefebvre and from which citizen-focused urbanism is conceived, could be considered as a “right to the infrastructures”. A FREE SPACE is an infrastructure and must be used to “infrastructure” the rights of every citizen. And, even though it is true that these actions are mere flashes, they have made visible another paradigm of management and urban proposal that can be prevailing in a near future. “UP-BOTTOM” INSTITUTIONAL ACTIONS have revealed that the interventions have only focused on resolving construction processes and the incorporation of the program as a “problem” data that was necessary to resolve in order to avoid its influence on the design.

Some Reflections on Engineering Education as a Tool for the next Knowledge Society

The aim of this paper is to offer a broad panorama of some aspects related with Engineering Education in a Knowledge Society.

The integration of project competences within the post-graduate programme: a case study of the International Masters in Rural Development AGRIS MUNDUS

Experiences relating to the InternationalMasters in Rural Development from the Technical University of Madrid (Universidad Politécnica de Madrid, UPM), the first Spanish programme to receive a mention as a Registered Education Programme by InternationalProject Management Association (IPMA) are considered. Backed by an educational strategy based on Project-Based Learning dating back twenty years, this programme has managed to adapt to the competence evaluation requirements proposed by the European Space for Higher Education (ESHE). In order to do this the training is linked to the professional qualification using competences as a reference leading to the qualification in project management as established by the IPMA.

Study of the Influence of Reference System in Surface Finishing Parameters Evaluation.

In the present paper the influence of the reference system with regard to the characterization of the surface finishing is analyzed. The effect of the reference system’s choice on the most representative surface finishing parameters (e.g. roughness average Ra and root mean square values Rq) is studied. The study can also be applied to their equivalent parameters in waviness and primary profiles. Based on ISO and ASME standards, three different types of regression lines (central, mean and orthogonal) are theoretically and experimentally analyzed, identifying the validity and applicability fields of each one depending on profile’s geometry. El presente trabajo realiza un estudio de la influencia que supone la elección del sistema de referencia en la determinación los valores de los parámetros más relevantes empleados en la caracterización del acabado superficial tales como la rugosidad media aritmética Ra o la rugosidad media cuadrática Rq y sus equivalentes en los perfiles de ondulación y completo. Partiendo de la definición establecida por las normas ISO y ASME, se analizan tres tipos de líneas de regresión cuadrática (línea central, línea media y línea ortogonal), delimitando los campos de validez y de aplicación de cada una de ellas en función de la geometría del perfil. Para ello se plantean diversos tipos de perfiles y se desarrolla un estudio teórico y experimental de los mismos.

Factored Translation Models for improving a Speech into Sign Language Translation System

This paper proposes the use of Factored Translation Models (FTMs) for improving a Speech into Sign Language Translation System. These FTMs allow incorporating syntactic-semantic information during the translation process. This new information permits to reduce significantly the translation error rate. This paper also analyses different alternatives for dealing with the non-relevant words. The speech into sign language translation system has been developed and evaluated in a specific application domain: the renewal of Identity Documents and Driver’s License. The translation system uses a phrase-based translation system (Moses). The evaluation results reveal that the BLEU (BiLingual Evaluation Understudy) has improved from 69.1% to 73.9% and the mSER (multiple references Sign Error Rate) has been reduced from 30.6% to 24.8%.

Self-reference Scrubber for TMR Systems Based on Xilinx Virtex FPGAs

SRAM-based FPGAs are sensitive to radiation effects. Soft errors can appear and accumulate, potentially defeating mitigation strategies deployed at the Application Layer. Therefore, Configuration Memory scrubbing is required to improve radiation tolerance of such FPGAs in space applications. Virtex FPGAs allow runtime scrubbing by means of dynamic partial reconfiguration. Even with scrubbing, intra-FPGA TMR systems are subjected to common-mode errors affecting more than one design domain. This is solved in inter-FPGA TMR systems at the expense of a higher cost, power and mass. In this context, a self-reference scrubber for device-level TMR system based on Xilinx Virtex FPGAs is presented. This scrubber allows for a fast SEU/MBU detection and correction by peer frame comparison without needing to access a golden configuration memory

An automatic translation scheme from prolog to the andorra kernel language

The Andorra family of languages (which includes the Andorra Kernel Language -AKL) is aimed, in principie, at simultaneously supporting the programming styles of Prolog and committed choice languages. On the other hand, AKL requires a somewhat detailed specification of control by the user. This could be avoided by programming in Prolog to run on AKL. However, Prolog programs cannot be executed directly on AKL. This is due to a number of factors, from more or less trivial syntactic differences to more involved issues such as the treatment of cut and making the exploitation of certain types of parallelism possible. This paper provides basic guidelines for constructing an automatic compiler of Prolog programs into AKL, which can bridge those differences. In addition to supporting Prolog, our style of translation achieves independent and-parallel execution where possible, which is relevant since this type of parallel execution preserves, through the translation, the user-perceived "complexity" of the original Prolog program.

GIS analysis for the study of rural depopulation: the Kingdom of Valencia (Tomas Lopez 1789)

One of the more aspects that have shaped the landscape is the human impact. The human impact has the clearest indicator of the density of settlements in a particular geographic region. In this paper we study all settlements shown on the map of the Kingdom of Valencia, Spain Geographic Atlas (AGE) of Tomas Lopez (1788), and their correspondence with the current ones. To meet this goal we have developed a specific methodology, the systematic study of all existing settlements in historical cartography. This will determine which have disappeared and which have been renamed. The material used has been the historical cartography of Tomas Lopez, part of the AGE (1789), the Kingdom of Valencia (1789), sheets numbers (78, 79, 80 and 81); Current mapping of the provinces of Alicante, Valencia, Castellon, Teruel, Tattagona and Cuenca; As main software ArcGis V.9.3. The steps followed in the methodology are as follows: 1. Check the scale of the maps. Analyze the possible use of a spherical earth model. 2. Geo-reference of maps with latitude and longitude framework. Move the historical longitude origin to the origin longitude of modern cartography. 3 Digitize of all population settlements or cities. 4 Identify historic settlements or cities corresponding with current ones. 5. If the maps have the same orientation and scale, replace the coordinate transformation of historical settlements with a new one, by a translation in latitude and longitude equal to the calculated mean value of all ancient map points corresponding to the new. 6. Calculation of absolute accuracy of the two maps, i.e. the linear distance between the points of both maps. 7 draw in the GIS, the settlements without correspondence, in the current coordinates, and with a circle of mean error of the sheet, in order to locate their current location. If there are actual settlements exist within this circle, they are candidates to be the searched settlements. We analyzed more than 2000 settlements represented in the Atlas of Tomas Lopez of the Kingdom of Valencia (1789), of which almost 14.5% have no correspondence with the existing settlements. The rural landscape evolution of the Valencia, oldest kingdom of Valencia, one can say that can be severely affected by the anthropization suffered in the period from 1789 to the present, since 70% of existing settlements actually have appeared after Tomas Lopez¿s cartography, dated on 1789

Influence of loudspeaker directivity and measurement geometry on direct acoustic levels over façades for acoustic insulation tests with the International Standard ISO 140-5

The International Standard ISO 140-5 on field measurements of airborne sound insulation of façades establishes that the directivity of the measurement loudspeaker should be such that the variation in the local direct sound pressure level (ΔSPL) on the sample is ΔSPL < 5 dB (or ΔSPL < 10 dB for large façades). This condition is usually not very easy to accomplish nor is it easy to verify whether the loudspeaker produces such a uniform level. Direct sound pressure levels on the ISO standard façade essentially depend on the distance and directivity of the loudspeaker used. This paper presents a comprehensive analysis of the test geometry for measuring sound insulation and explains how the loudspeaker directivity, combined with distance, affects the acoustic level distribution on the façade. The first sections of the paper are focused on analysing the measurement geometry and its influence on the direct acoustic level variations on the façade. The most favourable and least favourable positions to minimise these direct acoustic level differences are found, and the angles covered by the façade in the reference system of the loudspeaker are also determined. Then, the maximum dimensions of the façade that meet the conditions of the ISO 140-5 standard are obtained for the ideal omnidirectional sound source and the piston radiating in an infinite baffle, which is chosen as the typical radiation pattern for loudspeakers. Finally, a complete study of the behaviour of different loudspeaker radiation models (such as those usually utilised in the ISO 140-5 measurements) is performed, comparing their radiation maps on the façade for searching their maximum dimensions and the most appropriate radiation configurations.

GIS for cartographic accuracy analysis of settlements in the province of Madrid (AGE Tomas Lopez 1804).

Purpose: In this paper we study all settlements shown on the map of the Province of Madrid, sheet number 1 of AGE (Atlas Geográfico de España of Tomas Lopez 1804) and their correspondence with the current ones. This map is divided in to zones: Madrid and Almonacid de Zorita. Method: The steps followed in the methodology are as follow: 1. Geo-reference of maps with latitude and longitude framework. Move the historical longitude origin to the origin longitude of modern cartography. 2 Digitize of all population settlements or cities (97 on Madrid and 42 on Almonacid de Zorita), 3 Identify historic settlements or cities corresponding with current ones. 4. If the maps have the same orientation and scale, replace the coordinate transformation of historical settlements with a new one, by a translation in latitude and longitude equal to the calculated mean value of all ancient map points corresponding to the new. 5. Calculation of absolute accuracy of the two maps. 6 draw in the GIS, the settlements accuracy. Result: It was found that all AGE settlements have good correspondence with current, ie only 27 settlements lost in Madrid and 2 in Almonacid. The average accuracy is 2.3 and 5.7 km to Madrid and Almonacid de Zorita respectively. Discussion & Conclusion: The final accuracy map obtained shows that there is less error in the middle of the map. This study highlights the great work done by Tomas Lopez in performing this mapping without fieldwork. This demonstrates the great value that has been the work of Tomas Lopez in the history of cartography.

Adapting a speech into sign language translation system to a new domain

This paper presents a methodology for adapting an advanced communication system for deaf people in a new domain. This methodology is a user-centered design approach consisting of four main steps: requirement analysis, parallel corpus generation, technology adaptation to the new domain, and finally, system evaluation. In this paper, the new considered domain has been the dialogues in a hotel reception. With this methodology, it was possible to develop the system in a few months, obtaining very good performance: good speech recognition and translation rates (around 90%) with small processing times.

Formalisation and experiences of R2RML-based SPARQL to SQL query translation using Morph

R2RML is used to specify transformations of data available in relational databases into materialised or virtual RDF datasets. SPARQL queries evaluated against virtual datasets are translated into SQL queries according to the R2RML mappings, so that they can be evaluated over the underlying relational database engines. In this paper we describe an extension of a well-known algorithm for SPARQL to SQL translation, originally formalised for RDBMS-backed triple stores, that takes into account R2RML mappings. We present the result of our implementation using queries from a synthetic benchmark and from three real use cases, and show that SPARQL queries can be in general evaluated as fast as the SQL queries that would have been generated by SQL experts if no R2RML mappings had been used.

A multidisciplinary reference framework to support innovative design, implementation and assessment of chronic care models

Hoy en día, por primera vez en la historia, la mayor parte de la población podrá vivir hasta los sesenta años y más (United Nations, 2015). Sin embargo, todavía existe poca evidencia que demuestre que las personas mayores, estén viviendo con mejor salud que sus padres, a la misma edad, ya que la mayoría de los problemas de salud en edades avanzadas están asociados a las enfermedades crónicas (WHO, 2015). Los sistemas sanitarios de los países desarrollados funcionan adecuadamente cuando se trata del cuidado de enfermedades agudas, pero no son lo suficientemente eficaces en la gestión de las enfermedades crónicas. Durante la última década, se han realizado esfuerzos para mejorar esta gestión, por medio de la utilización de estrategias de prevención y de reenfoque de la provisión de los servicios de atención para la salud (Kane et al. 2005). Según una revisión sistemática de modelos de cuidado de salud, comisionada por el sistema nacional de salud Británico, pocos modelos han conceptualizado cuáles son los componentes que hay que utilizar para proporcionar un cuidado crónico efectivo, y estos componentes no han sido suficientemente estructurados y articulados. Por lo tanto, no hay suficiente evidencia sobre el impacto real de cualquier modelo existente en la actualidad (Ham, 2006). Las innovaciones podrían ayudar a conseguir mejores diagnósticos, tratamientos y gestión de pacientes crónicos, así como a dar soporte a los profesionales y a los pacientes en el cuidado. Sin embargo, la forma en las que estas innovaciones se proporcionan no es lo suficientemente eficiente, efectiva y amigable para el usuario. Para mejorar esto, hace falta crear equipos de trabajo y estrategias multidisciplinares. En conclusión, hacen falta actividades que permitan conseguir que las innovaciones sean utilizadas en los sistemas de salud que quieren mejorar la gestión del cuidado crónico, para que sea posible: 1) traducir la “atención sanitaria basada en la evidencia” en “conocimiento factible”; 2) hacer frente a la complejidad de la atención sanitaria a través de una investigación multidisciplinaria; 3) identificar una aproximación sistemática para que se establezcan intervenciones innovadoras en el cuidado de salud. El marco de referencia desarrollado en este trabajo de investigación es un intento de aportar estas mejoras. Las siguientes hipótesis han sido propuestas: Hipótesis 1: es posible definir un proceso de traducción que convierta un modelo de cuidado crónico en una descripción estructurada de objetivos, requisitos e indicadores clave de rendimiento. Hipótesis 2: el proceso de traducción, si se ejecuta a través de elementos basados en la evidencia, multidisciplinares y de orientación económica, puede convertir un modelo de cuidado crónico en un marco descriptivo, que define el ciclo de vida de soluciones innovadoras para el cuidado de enfermedades crónicas. Hipótesis 3: es posible definir un método para evaluar procesos, resultados y capacidad de desarrollar habilidades, y asistir equipos multidisciplinares en la creación de soluciones innovadoras para el cuidado crónico. Hipótesis 4: es posible dar soporte al desarrollo de soluciones innovadoras para el cuidado crónico a través de un marco de referencia y conseguir efectos positivos, medidos en indicadores clave de rendimiento. Para verificar las hipótesis, se ha definido una aproximación metodológica compuesta de cuatro Fases, cada una asociada a una hipótesis. Antes de esto, se ha llevado a cabo una “Fase 0”, donde se han analizado los antecedentes sobre el problema (i.e. adopción sistemática de la innovación en el cuidado crónico) desde una perspectiva multi-dominio y multi-disciplinar. Durante la fase 1, se ha desarrollado un Proceso de Traducción del Conocimiento, elaborado a partir del JBI Joanna Briggs Institute (JBI) model of evidence-based healthcare (Pearson, 2005), y sobre el cual se han definido cuatro Bloques de Innovación. Estos bloques consisten en una descripción de elementos innovadores, definidos en la fase 0, que han sido añadidos a los cuatros elementos que componen el modelo JBI. El trabajo llevado a cabo en esta fase ha servido también para definir los materiales que el proceso de traducción tiene que ejecutar. La traducción que se ha llevado a cabo en la fase 2, y que traduce la mejor evidencia disponible de cuidado crónico en acción: resultado de este proceso de traducción es la parte descriptiva del marco de referencia, que consiste en una descripción de un modelo de cuidado crónico (se ha elegido el Chronic Care Model, Wagner, 1996) en términos de objetivos, especificaciones e indicadores clave de rendimiento y organizada en tres ciclos de innovación (diseño, implementación y evaluación). Este resultado ha permitido verificar la segunda hipótesis. Durante la fase 3, para demostrar la tercera hipótesis, se ha desarrollado un método-mixto de evaluación de equipos multidisciplinares que trabajan en innovaciones para el cuidado crónico. Este método se ha creado a partir del método mixto usado para la evaluación de equipo multidisciplinares translacionales (Wooden, 2013). El método creado añade una dimensión procedural al marco. El resultado de esta fase consiste, por lo tanto, en una primera versión del marco de referencia, lista para ser experimentada. En la fase 4, se ha validado el marco a través de un caso de estudio multinivel y con técnicas de observación-participante como método de recolección de datos. Como caso de estudio se han elegido las actividades de investigación que el grupo de investigación LifeStech ha desarrollado desde el 2008 para mejorar la gestión de la diabetes, actividades realizadas en un contexto internacional. Los resultados demuestran que el marco ha permitido mejorar las actividades de trabajo en distintos niveles: 1) la calidad y cantidad de las publicaciones; 2) se han conseguido dos contratos de investigación sobre diabetes: el primero es un proyecto de investigación aplicada, el segundo es un proyecto financiado para acelerar las innovaciones en el mercado; 3) a través de los indicadores claves de rendimiento propuestos en el marco, una prueba de concepto de un prototipo desarrollado en un proyecto de investigación ha sido transformada en una evaluación temprana de una intervención eHealth para el manejo de la diabetes, que ha sido recientemente incluida en Repositorio de prácticas innovadoras del Partenariado de Innovación Europeo en Envejecimiento saludable y activo. La verificación de las 4 hipótesis ha permitido demonstrar la hipótesis principal de este trabajo de investigación: es posible contribuir a crear un puente entre la atención sanitaria y la innovación y, por lo tanto, mejorar la manera en que el cuidado crónico sea procurado en los sistemas sanitarios. ABSTRACT Nowadays, for the first time in history, most people can expect to live into their sixties and beyond (United Nations, 2015). However, little evidence suggests that older people are experiencing better health than their parents, and most of the health problems of older age are linked to Chronic Diseases (WHO, 2015). The established health care systems in developed countries are well suited to the treatment of acute diseases but are mostly inadequate for dealing with CDs. Healthcare systems are challenging the burden of chronic diseases by putting more emphasis on the prevention of disease and by looking for new ways to reorient the provision of care (Kane et al., 2005). According to an evidence-based review commissioned by the British NHS Institute, few models have conceptualized effective components of care for CDs and these components have been not structured and articulated. “Consequently, there is limited evidence about the real impact of any of the existing models” (Ham, 2006). Innovations could support to achieve better diagnosis, treatment and management for patients across the continuum of care, by supporting health professionals and empowering patients to take responsibility. However, the way they are delivered is not sufficiently efficient, effective and consumer friendly. The improvement of innovation delivery, involves the creation of multidisciplinary research teams and taskforces, rather than just working teams. There are several actions to improve the adoption of innovations from healthcare systems that are tackling the epidemics of CDs: 1) Translate Evidence-Based Healthcare (EBH) into actionable knowledge; 2) Face the complexity of healthcare through multidisciplinary research; 3) Identify a systematic approach to support effective implementation of healthcare interventions through innovation. The framework proposed in this research work is an attempt to provide these improvements. The following hypotheses have been drafted: Hypothesis 1: it is possible to define a translation process to convert a model of chronic care into a structured description of goals, requirements and key performance indicators. Hypothesis 2: a translation process, if executed through evidence-based, multidisciplinary, holistic and business-oriented elements, can convert a model of chronic care in a descriptive framework, which defines the whole development cycle of innovative solutions for chronic disease management. Hypothesis 3: it is possible to design a method to evaluate processes, outcomes and skill acquisition capacities, and assist multidisciplinary research teams in the creation of innovative solutions for chronic disease management. Hypothesis 4: it is possible to assist the development of innovative solutions for chronic disease management through a reference framework and produce positive effects, measured through key performance indicators. In order to verify the hypotheses, a methodological approach, composed of four Phases that correspond to each one of the stated hypothesis, was defined. Prior to this, a “Phase 0”, consisting in a multi-domain and multi-disciplinary background analysis of the problem (i.e.: systematic adoption of innovation to chronic care), was carried out. During phase 1, in order to verify the first hypothesis, a Knowledge Translation Process (KTP) was developed, starting from the JBI Joanna Briggs Institute (JBI) model of evidence-based healthcare was used (Pearson, 2005) and adding Four Innovation Blocks. These blocks represent an enriched description, added to the JBI model, to accelerate the transformation of evidence-healthcare through innovation; the innovation blocks are built on top of the conclusions drawn after Phase 0. The background analysis gave also indication on the materials and methods to be used for the execution of the KTP, carried out during phase 2, that translates the actual best available evidence for chronic care into action: this resulted in a descriptive Framework, which is a description of a model of chronic care (the Chronic Care Model was chosen, Wagner, 1996) in terms of goals, specified requirements and Key Performance Indicators, and articulated in the three development cycles of innovation (i.e. design, implementation and evaluation). Thanks to this result the second hypothesis was verified. During phase 3, in order to verify the third hypothesis, a mixed-method to evaluate multidisciplinary teams working on innovations for chronic care, was created, based on a mixed-method used for the evaluation of Multidisciplinary Translational Teams (Wooden, 2013). This method adds a procedural dimension to the descriptive component of the Framework, The result of this phase consisted in a draft version of the framework, ready to be tested in a real scenario. During phase 4, a single and multilevel case study, with participant-observation data collection, was carried out, in order to have a complete but at the same time multi-sectorial evaluation of the framework. The activities that the LifeStech research group carried out since 2008 to improve the management of diabetes have been selected as case study. The results achieved showed that the framework allowed to improve the research activities in different directions: the quality and quantity of the research publications that LifeStech has issued, have increased substantially; 2 project grants to improve the management of diabetes, have been assigned: the first is a grant funding applied research while the second is about accelerating innovations into the market; by using the assessment KPIs of the framework, the proof of concept validation of a prototype developed in a research project was transformed into an early stage assessment of innovative eHealth intervention for Diabetes Management, which has been recently included in the repository of innovative practice of the European Innovation Partnership on Active and Health Ageing initiative. The verification of the 4 hypotheses lead to verify the main hypothesis of this research work: it is possible to contribute to bridge the gap between healthcare and innovation and, in turn, improve the way chronic care is delivered by healthcare systems.