Estudio De Las Propiedades Puzolánicas De Las Rocas Volcánicas Del Monte Basilé, República De Guinea Ecuatorial, Y Sus Aplicaciones Como Puzolanas Para La Sustitución Del Cemento En Las Mezclas De Morteros.

Las rocas efusivas formadas por la actividad volcánica del volcán Basilé constituyen la principal fuente de áridos naturales de la Isla de Bioko, en Guinea Ecuatorial. El auge alcanzado por la construcción en la ciudad de Malabo, Malabo II y Malabo III, son un testimonio concluyente del volumen de áridos empleado para erigir los nuevos polígonos, urbanizaciones, infraestructura portuaria, carreteras, presas, alcantarillados y paseos marítimos. Gran parte de los materiales de construcción, fundamentalmente el cemento, procede de las importaciones, mientras que las rocas y minerales industriales autóctonos se conocen poco, opacados por el papel hegemónico del petróleo y el gas natural. El desconocimiento casi absoluto de las propiedades químicas, petrográficas y mecánicas de estas rocas, y la existencia de un sistema normativo pobre, ha provocado su uso indiscriminado y una controvertida calidad en la elaboración de los productos finales. Asimismo, la falta de experiencia en ingeniería y geotecnia para el desarrollo de minas y canteras, y la intermitencia de una ley de minas poco consolidada, ha favorecido la germinación indiscriminada de un gran número de excavaciones, propensas a continuos derrumbes y a la producción de impactos medioambientales irreversibles. La presente contribución científica se ha marcado como objetivo mostrar los resultados obtenidos del análisis y caracterización de estas formaciones volcánicas, así como su posible aprovechamiento industrial mediante el aporte de datos sobre sus propiedades puzolánicas e idoneidad en la elaboración de morteros. Los datos indican que estas rocas eruptivas, fundamentalmente escorias y flujos de lavas de composición basáltica, son capaces de sustituir al cemento pórtland normal hasta en un 25%, favoreciendo el incremento de las resistencias mecánicas normales con valores que sobrepasan los 37 Mpa a 28 días. El análisis de las muestras mediante el método de la puzolanicidad a 7 días dejó establecido el carácter puzolánico de estas rocas, que fue corroborado por la interpretación de citados ensayos mecánicos. El estudio de la composición química detectó contenidos en SiO2 (44,40%), Al2O3 (15,58%), CaO (9,32%), MgO (4,25%) y Fe2O3 (13,63%), y cantidades despreciables de azufre, sulfatos y materia orgánica. Los análisis de difracción de rayos x revelaron la presencia mayoritaria de una fase compuesta por feldespato, y una fase subordinada constituida por cuarzo, hematita y dolomita. El estudio mediante microscopía electrónica de barrido permitió comprobar la ausencia casi total de las especies vítreas. Los resultados que se presentan en este trabajo, podrían devenir en información útil para el posible emplazamiento de una fábrica de cemento puzolánico en la Isla de Bioko; la actual fábrica Abayak, única en Guinea Ecuatorial, y que se encuentra situada en la parte continental del país, no aporta suficiente producción para las demandas cada vez mayores de la construcción.

New methods for the estimation of Takagi-Sugeno model based extended Kalman filter and its applications to optimal control for nonlinear systems

This paper describes new approaches to improve the local and global approximation (matching) and modeling capability of Takagi–Sugeno (T-S) fuzzy model. The main aim is obtaining high function approximation accuracy and fast convergence. The main problem encountered is that T-S identification method cannot be applied when the membership functions are overlapped by pairs. This restricts the application of the T-S method because this type of membership function has been widely used during the last 2 decades in the stability, controller design of fuzzy systems and is popular in industrial control applications. The approach developed here can be considered as a generalized version of T-S identification method with optimized performance in approximating nonlinear functions. We propose a noniterative method through weighting of parameters approach and an iterative algorithm by applying the extended Kalman filter, based on the same idea of parameters’ weighting. We show that the Kalman filter is an effective tool in the identification of T-S fuzzy model. A fuzzy controller based linear quadratic regulator is proposed in order to show the effectiveness of the estimation method developed here in control applications. An illustrative example of an inverted pendulum is chosen to evaluate the robustness and remarkable performance of the proposed method locally and globally in comparison with the original T-S model. Simulation results indicate the potential, simplicity, and generality of the algorithm. An illustrative example is chosen to evaluate the robustness. In this paper, we prove that these algorithms converge very fast, thereby making them very practical to use.

Methodology for adapting the parameters of a fuzzy system using the extended Kalman filter

When we try to analyze and to control a system whose model was obtained only based on input/output data, accuracy is essential in the model. On the other hand, to make the procedure practical, the modeling stage must be computationally efficient. In this regard, this paper presents the application of extended Kalman filter for the parametric adaptation of a fuzzy model

Application of the Extended Kalman filter to fuzzy modeling: Algorithms and practical implementation

Modeling phase is fundamental both in the analysis process of a dynamic system and the design of a control system. If this phase is in-line is even more critical and the only information of the system comes from input/output data. Some adaptation algorithms for fuzzy system based on extended Kalman filter are presented in this paper, which allows obtaining accurate models without renounce the computational efficiency that characterizes the Kalman filter, and allows its implementation in-line with the process

A new approach to fuzzy estimation of Takagi-Sugeno model and its applications to optimal control for nonlinear systems

An efficient approach is presented to improve the local and global approximation and modelling capability of Takagi-Sugeno (T-S) fuzzy model. The main aim is obtaining high function approximation accuracy. The main problem is that T-S identification method cannot be applied when the membership functions are overlapped by pairs. This restricts the use of the T-S method because this type of membership function has been widely used during the last two decades in the stability, controller design and are popular in industrial control applications. The approach developed here can be considered as a generalized version of T-S method with optimized performance in approximating nonlinear functions. A simple approach with few computational effort, based on the well known parameters' weighting method is suggested for tuning T-S parameters to improve the choice of the performance index and minimize it. A global fuzzy controller (FC) based Linear Quadratic Regulator (LQR) is proposed in order to show the effectiveness of the estimation method developed here in control applications. Illustrative examples of an inverted pendulum and Van der Pol system are chosen to evaluate the robustness and remarkable performance of the proposed method and the high accuracy obtained in approximating nonlinear and unstable systems locally and globally in comparison with the original T-S model. Simulation results indicate the potential, simplicity and generality of the algorithm.

Estimación de modelos borrosos y su aplicación al control óptimo

El objetivo de la presentación es dar a conocer los últimos trabajos del Grupo de Investigación sobre últimos trabajos del Grupo de Investigación sobre Control Borroso. • Obtención de modelos precisos de sistemas no lineales basados en sistemas borrosos – Mamdani – Takagi-Sugeno – Linealización • Generalización del método propuesto por T-S • Identificación iterativa basada en el Filtro de Kalman • Sistemas de control basados en el modelo TS obtenido – LQR

Fuzzy Optimal Control for Double Inverted Pendulum

In this paper a fuzzy optimal control for stabilizing an upright position a double inverted pendulum (DIP) is developed and compared. Modeling is based on Euler-Lagrange equations. This results in a complicated nonlinear fast reaction, unstable multivariable system. Firstly, the mathematical models of double pendulum system are presented. The weight variable fuzzy input is gained by combining the fuzzy control theory with the optimal control theory. Simulation results show that the controller, which the upper pendulum is considered as main control variable, has high accuracy, quick convergence speed and higher precision.

Variable structure control with chattering elimination and guaranteed stability for a generalized T-S model

In this paper, a fuzzy based Variable Structure Control (VSC) with guaranteed stability is presented. The main objective is to obtain an improved performance of highly non-linear unstable systems. The main contribution of this work is that, firstly, new functions for chattering reduction and error convergence without sacrificing invariant properties are proposed, which is considered the main drawback of the VSC control. Secondly, the global stability of the controlled system is guaranteed.The well known weighting parameters approach, is used in this paper to optimize local and global approximation and modeling capability of T-S fuzzy model.A one link robot is chosen as a nonlinear unstable system to evaluate the robustness, effectiveness and remarkable performance of optimization approach and the high accuracy obtained in approximating nonlinear systems in comparison with the original T-S model. Simulation results indicate the potential and generality of the algorithm. The application of the proposed FLC-VSC shows that both alleviation of chattering and robust performance are achieved with the proposed FLC-VSC controller. The effectiveness of the proposed controller is proven in front of disturbances and noise effects.

Variable structure control with chattering reduction of a generalized T-S model

In this paper, a fuzzy logic controller (FLC) based variable structure control (VSC) is presented. The main objective is to obtain an improved performance of highly non-linear unstable systems. New functions for chattering reduction and error convergence without sacrificing invariant properties are proposed. The main feature of the proposed method is that the switching function is added as an additional fuzzy variable and will be introduced in the premise part of the fuzzy rules; together with the state variables. In this work, a tuning of the well known weighting parameters approach is proposed to optimize local and global approximation and modelling capability of the Takagi-Sugeno (T-S) fuzzy model to improve the choice of the performance index and minimize it. The main problem encountered is that the T-S identification method can not be applied when the membership functions are overlapped by pairs. This in turn restricts the application of the T-S method because this type of membership function has been widely used in control applications. The approach developed here can be considered as a generalized version of the T-S method. An inverted pendulum mounted on a cart is chosen to evaluate the robustness, effectiveness, accuracy and remarkable performance of the proposed estimation approach in comparison with the original T-S model. Simulation results indicate the potential, simplicity and generality of the estimation method and the robustness of the chattering reduction algorithm. In this paper, we prove that the proposed estimation algorithm converge the very fast, thereby making it very practical to use. The application of the proposed FLC-VSC shows that both alleviation of chattering and robust performance are achieved.

Self-Tuning PID controller for autonomous car tracking in urban traffic

In this paper an on line self-tuned PID controller is proposed for the control of a car whose goal is to follow another one, at distances and speeds typical in urban traffic. The bestknown tuning mechanism is perhaps the MIT rule, due to its ease of implementation. However, as it is well known, this method does not guarantee the stability of the system, providing good results only for constant or slowly varying reference signals and in the absence of noise, which are unrealistic conditions. When the reference input varies with an appreciable rate or in presence of noise, eventually it could result in system instability. In this paper an alternative method is proposed that significantly improves the robustness of the system for varying inputs or in the presence of noise, as demonstrated by simulation.

Control y Monitorización de un Invernadero a través de una Aplicación Móvil

Los invernaderos permiten tener un mayor control del entorno donde crecen las plantas. Son utilizados para aumentar la calidad y rendimiento de las plantaciones en ciertas ubicaciones que tienen estaciones cortas de crecimiento, o bien malas condiciones de iluminación debido a las localizaciones geográficas, por lo que permiten mejorar la producción de alimentos vegetales en entornos extremos. En este proyecto se ha desarrollado una maqueta de un invernadero y se propone el uso del microcontrolador Arduino y del sistema operativo Android, con el objetivo de lograr una tarea de control y monitorización sobre dicha maqueta. Por una parte, se utiliza la placa Arduino como tarjeta controladora del sistema y, a su vez, como tarjeta adquiridora de datos, y por otra parte se ha desarrollado una aplicación Android capaz de monitorizar y supervisar el estado del invernadero. Para llevar a cabo el flujo de información entre el invernadero y los dispositivos de monitorización, se ha desarrollado una aplicación servidor bajo código C++, capaz de administrar la información del invernadero en una base de datos MySQL y, de forma concurrente, atender las peticiones de los clientes Android registrados, proporcionándoles la información que soliciten, y ejecutando las acciones que reciben.

Optimal Control Using Feedback Linearization for a Generalized T-S Model

In this paper, a fuzzy feedback linearization is used to control nonlinear systems described by Takagi-Suengo (T-S) fuzzy systems. In this work, an optimal controller is designed using the linear quadratic regulator (LQR). The well known weighting parameters approach is applied to optimize local and global approximation and modelling capability of T-S fuzzy model to improve the choice of the performance index and minimize it. The approach used here can be considered as a generalized version of T-S method. Simulation results indicate the potential, simplicity and generality of the estimation method and the robustness of the proposed optimal LQR algorithm.

Análisis y Diseño de Algoritmos de Control Discreto de Sistemas MIMO Lineales y No Lineales Aplicando Técnicas de Control de Estructura Variable

Dentro de las técnicas de control de procesos no lineales, los controladores de estructura variable con modos deslizantes (VSC-SM en sus siglas en inglés) han demostrado ser una solución robusta, por lo cual han sido ampliamente estudiados en las cuatro últimas décadas. Desde los años ochenta se han presentado varios trabajos enfocados a especificar controladores VSC aplicados a sistemas de tiempo discreto (DVSC), siendo uno de los mayores intereses de análisis obtener las mismas prestaciones de robustez e invarianza de los controladores VSC-SM. El objetivo principal del trabajo de Tesis Doctoral consiste en estudiar, analizar y proponer unos esquemas de diseño de controladores DVSC en procesos multivariable tanto lineales como no lineales. De dicho estudio se propone una nueva filosofía de diseño de superficies deslizantes estables donde se han considerado aspectos hasta ahora no estudiados en el uso de DVSC-SM como son las limitaciones físicas de los actuadores y la dinámica deslizante no ideal. Lo más novedoso es 1) la propuesta de una nueva metodología de diseño de superficies deslizantes aplicadas a sistemas MIMO lineales y la extensión del mismo al caso de sistemas multivariables no lineales y 2) la definición de una nueva ley de alcance y de una ley de control robusta aplicada a sistemas MIMO, tanto lineales como no lineales, incluyendo un esquema de reducción de chattering. Finalmente, con el fin de ilustrar la eficiencia de los esquemas presentados, se incluyen ejemplos numéricos relacionados con el tema tratado en cada uno de los capítulos de la memoria. ABSTRACT Over the last four decades, variable structure controllers with sliding mode (VSC-SM) have been extensively studied, demonstrating to be a robust solution among robust nonlinear processes control techniques. Since the late 80s, several research works have been focused on the application of VSC controllers applied to discrete time or sampled data systems, which are known as DVSC-SM, where the most extensive source of analysis has been devoted to the robustness and invariance properties of VSC-SM controllers when applied to discrete systems. The main aim of this doctoral thesis work is to study, analyze and propose a design scheme of DVSC-SM controllers for lineal and nonlinear multivariable discrete time processes. For this purpose, a new design philosophy is proposed, where various design features have been considered that have not been analyzed in DVSC design approaches. Among them, the physical limitations and the nonideal dynamic sliding mode dynamics. The most innovative aspect is the inclusion of a new design methodology applied to lineal sliding surfaces MIMO systems and the extension to nonlinear multivariable systems, in addition to a new robust control law applied to lineal and nonlinear MIMO systems, including a chattering reduction scheme. Finally, to illustrate the efficiency of the proposed schemes, several numerical examples applied to lineal and nonlinear systems are included.

A friendly online C compiler to improve programming skills based on student self-assessment

This paper presents an online C compiler designed so that students can program their practical assignments in Programming courses. What is really innovative is the self-assessment of the exercises based on black-box tests and train students’ skill to test software. Moreover, this tool lets instructors, not only proposing and classifying practical exercises, but also evaluating automatically the efforts dedicated and the results obtained by the students. The system has been applied to the 1st-year students at the Industrial Engineering specialization at the Universidad Politecnica de Madrid. Results show that the students obtained better academic performance, reducing the failure rate in the practical exam considerably with respect to previous years, in addition that an anonymous survey proved that students are satisfied with the system because they get instant feedback about their programs.