The online case study development for the teaching of building structures reinforcement

The Reinforcement of Building Structures is one of the topics of the Master in Building Innovation Technology (MBIT) of Universidad Politécnica de Madrid (UPM). Since the beginning of the delivery of this master, case studies have been chosen as the teaching methodology. For the 2011-2012 course the online education of this subject was implemented, instead of the classical learning based on attendance. Through ICT’s (Information and Communication Technologies) students are provided with much more and more selective information than through the classical learning. ICT’s can be used for search, enquiries and reporting. Using the online tools has been proved, through the results obtained and based on the surveys made amongst students, to be a successful experience.

Evaluación para el aprendizaje en la asignatura sistemas operativos en modalidad online: un estudio cualitativo basado en la taxonomía de Bloom

La asignatura Sistemas Operativos presenta dificultades para su aprendizaje, pero poco se conoce acerca de las mismas, ya que no han sido determinadas ni estudiadas por la literatura. Asimismo, los trabajos existentes sobre la enseñanza y aprendizaje de Sistemas Operativos se limitan a proponer distintos enfoques para impartir la asignatura y en general no evalúan el aprendizaje de los estudiantes para comprobar la eficacia del método propuesto ni usan metodologías de investigación rigurosas. Por otra parte, la impartición de la asignatura Sistemas Operativos en modalidad online ha sido escasamente estudiada y podría tener dificultades adicionales a las de la modalidad presencial, ya que el contexto online impone una serie de restricciones tanto para el profesor como para el estudiante. En la presente tesis se ha llevado a cabo una evaluación formativa en la asignatura Sistemas Operativos, perteneciente al Grado de Ingeniería Informática de una universidad online. El objetivo inicial de la evaluación era descubrir las dificultades de los estudiantes para la comprensión de los conceptos de la asignatura. Posteriormente y, dada la buena aceptación de la evaluación por parte de los estudiantes, se ampliaron los objetivos del trabajo para explorar los efectos de la evaluación realizada sobre el aprendizaje. La evaluación formativa diseñada está basada en la taxonomía revisada de Bloom y sus principales objetivos son: (a) promover el aprendizaje significativo y (b) hacer a los estudiantes conscientes de su proceso de aprendizaje. La metodología de investigación utilizada es el estudio de caso cualitativo y la muestra está constituida por 9 estudiantes del total de 13 matriculados en la asignatura. Los datos cualitativos analizados proceden de las pruebas de evaluación formativa llevadas a cabo por los estudiantes durante la impartición de la asignatura. Los conceptos de sistemas operativos que han resultado más difíciles de comprender en el curso online estudiado han sido las interrupciones y los semáforos. Además, alrededor de estos conceptos se han identificado las dificultades específicas y sus posibles causas. Las dificultades descubiertas acerca de los semáforos corroboran las investigaciones existentes en el área de programación concurrente. El resto de las dificultades identificadas no habían sido determinadas por la literatura existente. En cuanto a los efectos de la evaluación formativa sobre el aprendizaje, la evidencia empírica muestra que ésta ha provocado en los estudiantes una reflexión profunda sobre los conceptos de la asignatura y sobre su propio proceso de aprendizaje. El estudio de caso presentado puede ayudar a los profesores del área de ingeniería a crear evaluaciones formativas en cursos online. La tesis, por tanto, realiza aportaciones relevantes en las áreas de enseñanza y aprendizaje de sistemas operativos, evaluación formativa, metodologías cualitativas y educación online. ABSTRACT Operating Systems is a difficult subject to learn; however little is known about said difficulties, as they have not been studied nor determined by the relevant literature. Existing studies on teaching and learning the subject of operating systems are limited to presenting different approaches for teaching the subject and generally do not evaluate students’ learning to verify the effectiveness of the proposed methods, nor do they use rigorous research methodologies. On the other hand, there are very few studies on teaching operating systems online, which may inherently present more difficulties than the in-person format, since an online context imposes a series of restrictions on both professors and students, such as not having face-to-face interaction for communications. This thesis studies a formative assessment of the subject of operating systems, as part of the Degree in Information Technology Engineering for an online university. The initial objective of this assessment was to determine the students’ difficulties in conceptual comprehension for this subject. Once students had accepted the assessment, the study’s objectives were expanded to include an investigation of the effects of the assessment on learning. The designed formative assessment was based on Revised Bloom’s Taxonomy with the following main objectives: (a) to promote meaningful learning and (b) (b) to make students aware of their learning process. The research methodology involves a qualitative case study with a sample consisting of 9 of the total 13 students registered for this course. The qualitative data analyzed comes from the formative assessment tests taken by these students during the course. The most difficult operating systems concepts for students in the online course were interrupts and semaphores. Additionally, the specific difficulties and their possible causes have been identified. The students’ comprehension difficulties with semaphores corroborate the existing research in the area of concurrent programming. The other identified difficulties were not discussed in the existing literature. Regarding the effects of the formative assessment on learning, the empirical evidence shows that it causes students to reflect carefully on the subject’s concepts as well as their own learning process. The presented case study can help professors in the area of engineering to create formative assessments for online courses. This thesis, therefore, makes relevant contributions to the areas of teaching and learning operating systems, formative assessment, qualitative methodologies, and online education.

Plataformas experimentales para la formación en el área de la electrónica en entornos de e-learning

El campo de estudio relacionado con los laboratorios remotos en el ámbito educativo de las ciencias y la ingeniería está sufriendo una notable expansión ante la necesidad de adaptar los procesos de aprendizaje en dichas áreas a las características y posibilidades de la formación online. Muchos de los recursos educativos basados en esta tecnología, existentes en la actualidad, presentan ciertas limitaciones que impiden alcanzar las competencias que se deben adquirir en los laboratorios de ingeniería. Estas limitaciones están relacionadas con diferentes aspectos de carácter técnico y formativo. A nivel técnico las limitaciones principales se centran en el grado de versatilidad que son capaces de proporcionar comparado con el que se dispone en un laboratorio tradicional y en el modo de interacción del usuario, que provoca que el estudiante no distinga claramente si está realizando acciones sobre sistemas reales o simulaciones. A nivel formativo las limitaciones detectadas son relevantes para poder alcanzar un aprendizaje significativo. En concreto están relacionadas principalmente con un escaso sentimiento de inmersión, una reducida sensación de realismo respecto a las operaciones que se realizan o la limitada posibilidad de realizar actividades de forma colaborativa. La aparición de nuevas tecnologías basadas en entornos inmersivos, unida a los avances producidos relacionados con el aumento de la capacidad gráfica de los ordenadores y del ancho de banda de acceso a Internet, han hecho factible que las limitaciones comentadas anteriormente puedan ser superadas gracias al desarrollo de nuevos recursos de aprendizaje surgidos de la fusión de laboratorios remotos y mundos virtuales 3D. Esta tesis doctoral aborda un trabajo de investigación centrado en proponer un modelo de plataformas experimentales, basado en la fusión de las dos tecnologías mencionadas, que permita generar recursos educativos online que faciliten la adquisición de competencias prácticas similares a las que se consiguen en un laboratorio tradicional vinculado a la enseñanza de la electrónica. El campo de aplicación en el que se ha focalizado el trabajo realizado se ha centrado en el área de la electrónica aunque los resultados de la investigación realizada se podrían adaptar fácilmente a otras disciplinas de la ingeniería. Fruto del trabajo realizado en esta tesis es el desarrollo de la plataforma eLab3D, basada en el modelo de plataformas experimentales propuesto, y la realización de dos estudios empíricos llevados a cabo con estudiantes de grado en ingeniería, muy demandados por la comunidad investigadora. Por un lado, la plataforma eLab3D, que permite llevar a cabo de forma remota actividades prácticas relacionadas con el diseño, montaje y prueba de circuitos electrónicos analógicos, aporta como novedad un dispositivo hardware basado en un sistema de conmutación distribuido. Dicho sistema proporciona un nivel de versatilidad muy elevado, a nivel de configuración de circuitos y selección de puntos de medida, que hace posible la realización de acciones similares a las que se llevan a cabo en los laboratorios presenciales. Por otra parte, los estudios empíricos realizados, que comparaban la eficacia educativa de una metodología de aprendizaje online, basada en el uso de la plataforma eLab3D, con la conseguida siguiendo una metodología clásica en los laboratorios tradicionales, mostraron que no se detectaron diferencias significativas en el grado de adquisición de los resultados de aprendizaje entre los estudiantes que utilizaron la plataforma eLab3D y los que asistieron a los laboratorios presenciales. Por último, hay que destacar dos aspectos relevantes relacionados directamente con esta tesis. En primer lugar, los resultados obtenidos en las experiencias educativas llevadas a cabo junto a valoraciones obtenidas por el profesorado que ha colaborado en las mismas han sido decisivos para que la plataforma eLab3D se haya integrado como recurso complementario de aprendizaje en titulaciones de grado de ingeniería de la Universidad Politécnica de Madrid. En segundo lugar, el modelo de plataformas experimentales que se ha propuesto en esta tesis, analizado por investigadores vinculados a proyectos en el ámbito de la fusión nuclear, ha sido tomado como referencia para generar nuevas herramientas de formación en dicho campo. ABSTRACT The field of study of remote laboratories in sciences and engineering educational disciplines is undergoing a remarkable expansion given the need to adapt the learning processes in the aforementioned areas to the characteristics and possibilities of online education. Several of the current educational resources based on this technology have certain limitations that prevent from reaching the required competencies in engineering laboratories. These limitations are related to different aspects of technical and educational nature. At the technical level, they are centered on the degree of versatility they are able to provide compared to a traditional laboratory and in the way the user interacts with them, which causes the student to not clearly distinguish if actions are being performed over real systems or over simulations. At the educational level, the detected limitations are relevant in order to reach a meaningful learning. In particular, they are mainly related to a scarce immersion feeling, a reduced realism sense regarding the operations performed or the limited possibility to carry out activities in a collaborative way. The appearance of new technologies based on immersive environments, together with the advances in graphical computer capabilities and Internet bandwidth access, have made the previous limitations feasible to be overcome thanks to the development of new learning resources that arise from merging remote laboratories and 3D virtual worlds. This PhD thesis tackles a research work focused on the proposal of an experimental platform model, based on the fusion of both mentioned technologies, which allows for generating online educational resources that facilitate the acquisition of practical competencies similar to those obtained in a traditional electronics laboratory. The application field, in which this work is focused, is electronics, although the research results could be easily adapted to other engineering disciplines. A result of this work is the development of eLab3D platform, based on the experimental platform model proposed, and the realization of two empirical studies with undergraduate students, highly demanded by research community. On one side, eLab3D platform, which allows to accomplish remote practical activities related to the design, assembling and test of analog electronic circuits, provides, as an original contribution, a hardware device based on a distributed switching system. This system offers a high level of versatility, both at the circuit configuration level and at the selection of measurement points, which allows for doing similar actions to those conducted in hands-on laboratories. On the other side, the empirical studies carried out, which compare the educational efficiency of an online learning methodology based on the use of eLab3D platform with that obtained following a classical methodology in traditional laboratories, shows that no significant differences in the acquired degree of learning outcomes among the students that used eLab3D platform and those that attended hands-on laboratories were detected. Finally, it is important to highlight two relevant aspects directly related with this thesis work. First of all, the results obtained in the educational experiences conducted, along with the assessment from the faculty that has collaborated in them, have been decisive to integrate eLab3D platform as a supplementary learning resource in engineering degrees at Universidad Politecnica de Madrid. Secondly, the experimental platform model originally proposed in this thesis, which has been analysed by nuclear fusion researchers, has been taken as a reference to generate new educational tools in that field.

Assessing the suitability of student interactions from Moodle data logs as predictors of cross-curricular competencies

In the past decades, online learning has transformed the educational landscape with the emergence of new ways to learn. This fact, together with recent changes in educational policy in Europe aiming to facilitate the incorporation of graduate students to the labor market, has provoked a shift on the delivery of instruction and on the role played by teachers and students, stressing the need for development of both basic and cross-curricular competencies. In parallel, the last years have witnessed the emergence of new educational disciplines that can take advantage of the information retrieved by technology-based online education in order to improve instruction, such as learning analytics. This study explores the applicability of learning analytics for prediction of development of two cross-curricular competencies – teamwork and commitment – based on the analysis of Moodle interaction data logs in a Master’s Degree program at Universidad a Distancia de Madrid (UDIMA) where the students were education professionals. The results from the study question the suitability of a general interaction-based approach and show no relation between online activity indicators and teamwork and commitment acquisition. The discussion of results includes multiple recommendations for further research on this topic.

Virtual Learning Environments In Faculties Of Education In Spain: Changes On Student Attitude

This paper presents some results of a R+D project entitled “e-Learning system for Practical Training of University students in Education Faculties (ForELearn)”, developed in Spain by the Universidad de Granada and the Universidad Politécnica de Madrid and funded by the Spanish Ministry of Education. In a first phase, through the use of AulaWeb Learning Management System, a set of adaptations and improvements of this software application have been done for the design and development of an experimental course of Practicum supervision. Next, the implementation of this course by means of a group of face to face and online seminars provides experimental data for the analysis and discussion about the point of view of users (preservice teachers) that have tracked their practice supervision with AulaWeb.

Using online presence to improve online collaborative learning

Social software tools have become an integral part of students? personal lives and their primary communication medium. Likewise, these tools are increasingly entering the enterprise world (within the recent trend known as Enterprise 2.0) and becoming a part of everyday work routines. Aiming to keep the pace with the job requirements and also to position learning as an integral part of students? life, the field of education is challenged to embrace social software. Personal Learning Environments (PLEs) emerged as a concept that makes use of social software to facilitate collaboration, knowledge sharing, group formation around common interests, active participation and reflective thinking in online learning settings. Furthermore, social software allows for establishing and maintaining one?s presence in the online world. By being aware of a student's online presence, a PLE is better able to personalize the learning settings, e.g., through recommendation of content to use or people to collaborate with. Aiming to explore the potentials of online presence for the provision of recommendations in PLEs, in the scope of the OP4L project, we have develop a software solution that is based on a synergy of Semantic Web technologies, online presence and socially-oriented learning theories. In this paper we present the current results of this research work.

Online games for the teaching of mathematics

In this article we present a didactic experience developed by the GIE (Group of Educational Innovation) “Pensamiento Matemático” of the Polytechnics University of Madrid (UPM), in order to bring secondary students and university students closer to Mathematics. It deals with the development of a virtual board game called Mate-trivial. The mechanics of the game is to win points by going around the board which consists of four types of squares identified by colours: “Statistics and Probability”, “Calculus and Analysis”, “Algebra and Geometry” and “Arithmetic and Number Theory ”. When landing on a square, a question of its category is set out: a correct answer wins 200 points, if wrong it loses 100 points, and not answering causes no effect on the points, but all the same, two minutes out of the 20 minutes that each game lasts are lost. For the game to be over it is necessary, before those 20 minutes run out, to reach the central square and succeed in the final task: four chained questions, one of each type, which must be all answered correctly. It is possible to choose between two levels to play: Level 1, for pre-university students and Level 2 for university students. A prototype of the game is available at the website “Aula de Pensamiento Matemático” developed by the GIE: http://innovacioneducativa.upm.es/pensamientomatematico/. This activity lies within a set of didactic actions which the GIE is developing in the framework of the project “Collaborative Strategies between University and Secondary School Education for the teaching and learning of Mathematics: An Application to solve problems while playing”, a transversal project financed by the UPM.

An online e-Learning authoring tool to create interactive multi-device learning objects using e-Infrastructure resources

Education can take advantage of e-Infrastructures to provide teachers with new opportunities to increase students' motivation and engagement while they learn. Nevertheless, teachers need to find, integrate and customize the resources provided by e-Infrastructures in an easy way. This paper presents ViSH Editor, an innovative web-based e-Learning authoring tool that aims to allow teachers to create new learning objects using e-Infrastructure resources. These new learning objects are called Virtual Excursions and are created as reusable, granular and interoperable learning objects. This way they can be reused to build new ones and they can be integrated in websites or Learning Management Systems. Details about the design, development and the tool itself are explained in this paper as well as the concept, structure and metadata of the new learning objects. Lastly, some real examples of how to enrich learning using Virtual Excursions are exposed.

Performance and Professional Skills in an Online Java Programming Course for Engineering Students

The main purpose of this work is to describe the case of an online Java Programming course for engineering students to learn computer programming and to practice other non-technicalabilities: online training, self-assessment, teamwork and use of foreign languages. It is important that students develop confidence and competence in these skills, which will be required later in their professional tasks and/or in other engineering courses (life-long learning). Furthermore, this paper presents the pedagogical methodology, the results drawn from this experience and an objective performance comparison with another conventional (face-to-face) Java course.

Facilitating the creation of interactive multi-device Learning Objects using an online authoring tool

Learning Objects facilitate reuse leading to cost and time savings as well as to the enhancement of the quality of educational resources. However, teachers find it difficult to create or to find high quality Learning Objects, and the ones they find need to be customized. Teachers can overcome this problem using suitable authoring systems that enable them to create high quality Learning Objects with little effort. This paper presents an open source online e-Learning authoring tool called ViSH Editor together with four novel interactive Learning Objects that can be created with it: Flashcards, Virtual Tours, Enriched Videos and Interactive Presentations. All these Learning Objects are created as web applications, which can be accessed via mobile devices. Besides, they can be exported to SCORM including their metadata in IEEE LOM format. All of them are described in the paper including an example of each. This approach for creating Learning Objects was validated through two evaluations: a survey among authors and a formal quality evaluation of 209 Learning Objects created with the tool. The results show that ViSH Editor facilitates educators the creation of high quality Learning Objects.

Soft Skills: A Comparative Analysis Between Online and Classroom Teaching

Currently the Spanish universities are making a great effort to effectively incorporate the development and assessment of generic skills in their training programs. Information and communications technologies (ICT) offer a wide range of possibilities but create uncertainty among teachers about the process and results. It is considered of interest to conduct a study to analyze the extent to which social skills like commitment, communication and teamwork are acquired by students and teachers. It seeks to ascertain the influence of the learning context, online or classroom training, in the development of these personal skills among the participants in the sample. For this study two universities have been chosen, Universidad a Distancia de Madrid (UDIMA) offering online training environment, and Universidad Politécnica de Madrid (UPM) with classroom training modality. A total of 257 individuals, 230 students and 27 teachers have answered the survey called Evalsoft. This instrument was designed in the project with the same name by a research team from Universidad Complutense of Madrid (UCM). Some interesting conclusions can be highlighted: it is in the online context where there are higher levels of commitment and teamwork than in the classroom modality; teachers have higher social skills that students and these improve with age. Sex and the training program appear to influence these social skills.

Innovación educativa en las redes sociales online: un estudio en la educación superior

Las redes sociales son tan antiguas como las relaciones entre los humanos, ya que las labores de cooperación siempre fueron imprescindibles en los procesos de asociación, tanto los formados por simples células hasta los constituidos por seres vivos. La sociedad está formada por una gran cantidad de situaciones que fomentan dicha colaboración. Desde la creación del Espacio Europeo de Educación Superior se ha promovido la utilización de entornos virtuales de aprendizaje que favorezcan una evaluación más transparente y objetiva. Las redes sociales online son las interfaces digitales más utilizadas por los estudiantes universitarios, por lo que son muchos los expertos que recomiendan analizar la utilidad educativa de este tipo de aplicaciones. Siguiendo estas recomendaciones se implementó una red social online, llamada Formatio, que se utilizó para apoyar el proceso de enseñanza y aprendizaje en la educación superior. El objetivo general de esta tesis doctoral fue valorar el nivel de aceptación de este entorno virtual de aprendizaje para los estudiantes universitarios que participaron en este estudio. Para evaluar el uso de la plataforma se analizaron las actividades generadas por los 172 estudiantes, seleccionados aleatoriamente, matriculados en la asignatura de Estadística y TIC en el curso 2010/2011, del Grado en Ciencias de la Actividad Física y el Deporte. Con el objetivo de estimar la utilidad educativa de las redes sociales online se diseñó y validó el instrumento de Valoración de Recursos Educativos Online (VREO), que fue aplicado a otra muestra aleatoria de 452 estudiantes de la misma facultad durante el curso 2011/2012. Los resultados confirman el éxito de este tipo de espacios virtuales gracias a la alta frecuencia de uso conseguida y a las buenas puntuaciones obtenidas por los alumnos, quienes tienen una buena opinión sobre las ventajas de usar las redes sociales online en la educación superior. De todos los recursos analizados la red social online Formatio ha sido la opción mejor valorada, seguida de Moodle y Facebook en segundo y tercer lugar, y de Twitter y YouTube, en cuarta y en quinta posición. Este estudio establece un punto de partida para futuras investigaciones encaminadas a obtener ciertos indicadores cualitativos y cuantitativos que faciliten una evaluación más justa de los actores integrantes de los sistemas educativos, que ayude a abrir las puertas de nuestra sociedad a la responsabilidad, la eficiencia, la transparencia y la objetividad. ABSTRACT Social networks are as old as human relations, since cooperative work has always been indispensable in all processes of association, from those composed of simple cells to those formed by living beings. Society is shaped by a large amount of situations that stimulate this cooperation. Since the creation of the European Higher Education Area, the use of virtual learning environments that favor more transparent and objective evaluation has been promoted. On-line social networks are the digital interfaces most widely used by university students, which is the reason why many experts recommend an analysis of the educational utility of this type of applications. Following these recommendations, an on-line social network called Formatio was created, which was used in order to support the teaching and learning process in higher education. The general objective of this doctoral dissertation was to evaluate the level of acceptance of this virtual learning environment by the university students who participated in this study. In order to evaluate the use of the platform, the activity created by 172 students chosen at random was analyzed; they were registered in the course on Statistics and Information and Communication Technology of the degree program in Sciences of Physical Activity and Sport during the academic year 2010/2011. With the goal of appraising the educational utility of on-line social networks, a tool for Evaluation of On-line Educational Resources (EOER) was designed, validated, and applied to another random sample of 452 students from the same department during the academic year 2011/2012. The results confirm the success of this type of virtual spaces, thanks to the high frequency of use achieved and the good grades obtained by the students who had a favorable opinion of the advantages of using on-line social networks in higher education. Out of all the resources analyzed, the Formatio on-line social network was the option that received the best evaluation, followed by Moodle and Facebook, which were second and third, and Twitter and YouTube, in fourth and fifth place respectively. This study establishes a starting point for future research that aims to obtain certain qualitative and quantitative indicators that will make it easier to engage in a fairer evaluation of the parties involved in education systems, which will help open the doors of our society to responsibility, efficiency, transparency, and objectivity.

A friendly online C compiler to improve programming skills based on student self-assessment

This paper presents an online C compiler designed so that students can program their practical assignments in Programming courses. What is really innovative is the self-assessment of the exercises based on black-box tests and train students’ skill to test software. Moreover, this tool lets instructors, not only proposing and classifying practical exercises, but also evaluating automatically the efforts dedicated and the results obtained by the students. The system has been applied to the 1st-year students at the Industrial Engineering specialization at the Universidad Politecnica de Madrid. Results show that the students obtained better academic performance, reducing the failure rate in the practical exam considerably with respect to previous years, in addition that an anonymous survey proved that students are satisfied with the system because they get instant feedback about their programs.