Experimental observations on hot-spots and derived

The hot-spot phenomenon is a relatively frequent problem occurring in current photovoltaic generators. It entails both a risk for the photovoltaic module’s lifetime and a decrease in its operational efficiency. Nevertheless, there is still a lack of widely accepted procedures for dealing with them in practice. This paper presents the IES–UPM observations on 200 affected photovoltaic modules. Visual and infrared inspection, as well as electroluminescence, peak power rating and operating voltage tests have been carried out. Thermography under steady state conditions and photovoltaic module operating voltage, both at normal photovoltaic system operating conditions, are the selected methods to deal in practice with hot-spots. The temperature difference between the hot-spot and its surroundings, and the operating voltage differences between affected and non-affected photovoltaic modules are the base for establishing defective criteria, at the lights of both lifetime and operating efficiency considerations. Hot-spots temperature gradients larger than 20 °C, in any case, and larger than 10 °C when, at the same time, voltage operating losses are larger than the allowable power losses fixed at the photovoltaic module warranties, are proposed as rejecting conditions for routine inspections under contractual frameworks. The upper threshold of 20 °C is deduced for temperate climates from the basic criterion of keeping absolute hot-spot temperatures below 20 °C.

Analysis and Design Considerations of an Electric Vehicle Powertrain regarding Energy Efficiency and Magnetic Field Exposure

En esta tesis se analiza el sistema de tracción de un vehículo eléctrico de batería desde el punto de vista de la eficiencia energética y de la exposición a campos magnéticos por parte de los pasajeros (radiación electromagnética). Este estudio incluye tanto el sistema de almacenamiento de energía como la máquina eléctrica, junto con la electrónica de potencia y los sistemas de control asociados a ambos. Los análisis y los resultados presentados en este texto están basados en modelos matemáticos, simulaciones por ordenador y ensayos experimentales a escala de laboratorio. La investigación llevada a cabo durante esta tesis tuvo siempre un marcado enfoque industrial, a pesar de estar desarrollada en un entorno de considerable carácter universitario. Las líneas de investigación acometidas tuvieron como destinatario final al diseñador y al fabricante del vehículo, a pesar de lo cual algunos de los resultados obtenidos son preliminares y/o excesivamente académicos para resultar de interés industrial. En el ámbito de la eficiencia energética, esta tesis estudia sistemas híbridos de almacenamiento de energía basados en una combinación de baterías de litio y supercondensadores. Este tipo de sistemas son analizados desde el punto de vista de la eficiencia mediante modelos matemáticos y simulaciones, cuantificando el impacto de ésta en otros parámetros tales como el envejecimiento de las baterías. Respecto a la máquina eléctrica, el estudio se ha centrado en máquinas síncronas de imanes permanentes. El análisis de la eficiencia considera tanto el diseño de la máquina como la estrategia de control, dejando parcialmente de lado el inversor y la técnica de modulación (que son incluidos en el estudio como fuentes adicionales de pérdidas, pero no como potenciales fuentes de optimización de la eficiencia). En este sentido, tanto la topología del inversor (trifásico, basado en IGBTs) como la técnica de modulación (control de corriente en banda de histéresis) se establecen desde el principio. El segundo aspecto estudiado en esta tesis es la exposición a campos magnéticos por parte de los pasajeros. Este tema se enfoca desde un punto de vista predictivo, y no desde un punto de vista de diagnóstico, puesto que se ha desarrollado una metodología para estimar el campo magnético generado por los dispositivos de potencia de un vehículo eléctrico. Esta metodología ha sido validada mediante ensayos de laboratorio. Otros aspectos importantes de esta contribución, además de la metodología en sí misma, son las consecuencias que se derivan de ella (por ejemplo, recomendaciones de diseño) y la comprensión del problema proporcionada por esta. Las principales contribuciones de esta tesis se listan a continuación: una recopilación de modelos de pérdidas correspondientes a la mayoría de dispositivos de potencia presentes en un vehículo eléctrico de batería, una metodología para analizar el funcionamiento de un sistema híbrido de almacenamiento de energía para aplicaciones de tracción, una explicación de cómo ponderar energéticamente los puntos de operación par-velocidad de un vehículo eléctrico (de utilidad para evaluar el rendimiento de una máquina eléctrica, por ejemplo), una propuesta de incluir un convertidor DC-DC en el sistema de tracción para minimizar las pérdidas globales del accionamiento (a pesar de las nuevas pérdidas introducidas por el propio DC-DC), una breve comparación entre dos tipos distintos de algoritmos de minimización de pérdidas para máquinas síncronas de imanes permanentes, una metodología predictiva para estimar la exposición a campos magnéticos por parte de los pasajeros de un vehículo eléctrico (debida a los equipos de potencia), y finalmente algunas conclusiones y recomendaciones de diseño respecto a dicha exposición a campos magnéticos. ABSTRACT This dissertation analyzes the powertrain of a battery electric vehicle, focusing on energy efficiency and passenger exposure to electromagnetic fields (electromagnetic radiation). This study comprises the energy storage system as well as the electric machine, along with their associated power electronics and control systems. The analysis and conclusions presented in this dissertation are based on mathematical models, computer simulations and laboratory scale tests. The research performed during this thesis was intended to be of industrial nature, despite being developed in a university. In this sense, the work described in this document was carried out thinking of both the designer and the manufacturer of the vehicle. However, some of the results obtained lack industrial readiness, and therefore they remain utterly academic. Regarding energy efficiency, hybrid energy storage systems consisting in lithium batteries, supercapacitors and up to two DC-DC power converters are considered. These kind of systems are analyzed by means of mathematical models and simulations from the energy efficiency point of view, quantifying its impact on other relevant aspects such as battery aging. Concerning the electric machine, permanent magnet synchronous machines are studied in this work. The energy efficiency analysis comprises the machine design and the control strategy, while the inverter and its modulation technique are taken into account but only as sources of further power losses, and not as potential sources for further efficiency optimization. In this sense, both the inverter topology (3-phase IGBT-based inverter) and the switching technique (hysteresis current control) are fixed from the beginning. The second aspect studied in this work is passenger exposure to magnetic fields. This topic is approached from the prediction point of view, rather than from the diagnosis point of view. In other words, a methodology to estimate the magnetic field generated by the power devices of an electric vehicle is proposed and analyzed in this dissertation. This methodology has been validated by laboratory tests. The most important aspects of this contribution, apart from the methodology itself, are the consequences (for instance, design guidelines) and the understanding of the magnetic radiation issue provided by it. The main contributions of this dissertation are listed next: a compilation of loss models for most of the power devices found in a battery electric vehicle powertrain, a simulation-based methodology to analyze hybrid energy storage performance in traction applications, an explanation of how to assign energy-based weights to different operating points in traction drives (useful when assessing electrical machine performance, for instance), a proposal to include one DC-DC converter in electric powertrains to minimize overall power losses in the system (despite the new losses added by the DC-DC), a brief comparison between two kinds of loss-minimization algorithms for permanent magnet synchronous machines in terms of adaptability and energy efficiency, a predictive methodology to estimate passenger magnetic field exposure due to power devices in an electric vehicle, and finally some useful conclusions and design guidelines concerning magnetic field exposure.

Education and Training of Future Nuclear Engineers Through the use of an Interactive Plant Simulator

The successful experience of the Jose Cabrera Nuclear Power Plant Interactive Graphical Simulator implementation in the Nuclear Engineering Department in the Universidad Polite´cnica de Madrid, for the Education and Training of nuclear engineers is shown in this paper. The paper starts with the objectives and the description of the Simulator Aula, and the methodology of work following the recommendations of the IAEA for the use of nuclear reactor simulators for education. The practices and material prepared for the students, as well as the operational and accident situations simulated are provided.

Planar compact array with parasitic elements for MIMO systems

A compact planar array with parasitic elements is studied to be used in MIMO systems. Classical compact arrays suffer from high coupling which makes correlation and matching efficiency to be worse. A proper matching network improves these lacks although its bandwidth is low and may increase the antenna size. The proposed antenna makes use of parasitic elements to improve both correlation and efficiency. A specific software based on MoM has been developed to analyze radiating structures with several feed points. The array is optimized through a Genetic Algorithm to determine parasitic elements position in order to fulfill different figures of merit. The proposed design provides the required correlation and matching efficiency to have a good performance over a significant bandwidth.

High-efficiency Köhler photovoltaic concentrators with external light confinement

Metal grid lines are a vital element in multijunction solar cells in order to take out from the cell the generated photocurrent. Nevertheless all this implies certain shadowing factor and thus certain reflectivity on cells surface that lowers its light absorption. This reflectivity produces a loss in electrical efficiency and thus a loss in global energy production for CPV systems. We present here an optical design for recovering this portion of reflected light, and thus leading to a system efficiency increase. This new design is based on an external confinement cavity, an optical element able to redirect the light reflected by the cell towards its surface again. It has been possible thanks to the recent invention of the advanced Köhler concentrators by LPI, likely to integrate one of these cavities easily. We have proven the excellent performance of these cavities integrated in this kind of CPV modules offering outstanding results: 33.2% module electrical efficiency @Tcell=25ºC and relative efficiency and Isc gains of over 6%.

On loader productivity, rock strength and explosive energy in metal mining

Twenty production blasts in two open pit mines were monitored, in rocks with medium to very high strength. Three different blasting agents (ANFO, watergel and emulsion blend) were used, with powder factors ranging between 0.88 and 1.45 kg/m3. Excavators were front loaders and rope shovels. Mechanical properties of the rock, blasting characteristics and mucking rates were carefully measured. A model for the calculation of the productivity of excavators is developed thereof, in which the production rate results as a product of an ideal, maximum, productivity rate times an operating efficiency. The maximum rate is a function of the dipper capacity and the efficiency is a function of rock density, strength, and explosive energy concentration in the rock. The model is statistically significant and explains up to 92 % of the variance of the production rate measurements.

First results obtained using the CENBG nanobeam line: performances and applications

A high resolution focused beam line has been recently installed on the AIFIRA (“Applications Interdisciplinaires des Faisceaux d’Ions en Région Aquitaine”) facility at CENBG. This nanobeam line, based on a doublet–triplet configuration of Oxford Microbeam Ltd. OM-50™ quadrupoles, offers the opportunity to focus protons, deuterons and alpha particles in the MeV energy range to a sub-micrometer beam spot. The beam optics design has been studied in detail and optimized using detailed ray-tracing simulations and the full mechanical design of the beam line was reported in the Debrecen ICNMTA conference in 2008. During the last two years, the lenses have been carefully aligned and the target chamber has been fully equipped with particle and X-ray detectors, microscopes and precise positioning stages. The beam line is now operational and has been used for its firstapplications to ion beam analysis. Interestingly, this set-up turned out to be a very versatile tool for a wide range of applications. Indeed, even if it was not intended during the design phase, the ion optics configuration offers the opportunity to work either with a high current microbeam (using the triplet only) or with a lower current beam presenting a sub-micrometer resolution (using the doublet–triplet configuration). The performances of the CENBGnanobeam line are presented for both configurations. Quantitative data concerning the beam lateral resolutions at different beam currents are provided. Finally, the firstresults obtained for different types of application are shown, including nuclear reaction analysis at the micrometer scale and the firstresults on biological samples

Memory performance of and-parallel prolog on shared-memory architectures

The goal of the RAP-WAM AND-parallel Prolog abstract architecture is to provide inference speeds significantly beyond those of sequential systems, while supporting Prolog semantics and preserving sequential performance and storage efficiency. This paper presents simulation results supporting these claims with special emphasis on memory performance on a two-level sharedmemory multiprocessor organization. Several solutions to the cache coherency problem are analyzed. It is shown that RAP-WAM offers good locality and storage efficiency and that it can effectively take advantage of broadcast caches. It is argued that speeds in excess of 2 ML IPS on real applications exhibiting medium parallelism can be attained with current technology.

An abstract machine for restricted and-parallel execution of logic programs

Although the sequential execution speed of logic programs has been greatly improved by the concepts introduced in the Warren Abstract Machine (WAM), parallel execution represents the only way to increase this speed beyond the natural limits of sequential systems. However, most proposed parallel logic programming execution models lack the performance optimizations and storage efficiency of sequential systems. This paper presents a parallel abstract machine which is an extension of the WAM and is thus capable of supporting ANDParallelism without giving up the optimizations present in sequential implementations. A suitable instruction set, which can be used as a target by a variety of logic programming languages, is also included. Special instructions are provided to support a generalized version of "Restricted AND-Parallelism" (RAP), a technique which reduces the overhead traditionally associated with the run-time management of variable binding conflicts to a series of simple run-time checks, which select one out of a series of compiled execution graphs.

Simulación de maniobras de buques con sistemas de propulsión no convencional en aguas poco profundas

Los requisitos cada vez más exigentes en cuanto a misiones, limitaciones operacionales y ambientales así como nuevas tecnologías, imponen permanentemente retos a los arquitectos navales para generar alternativas de buques y valorar su bondad en las primeras etapas del proyecto. Este es el caso de los Buques Patrulleros de Apoyo Fluvial Pesados PAF-P, que por requerimiento de la Armada Nacional de Colombia ha diseñado y construido COTECMAR. Los PAF-P, son buques fluviales cuya relación Manga-Calado excede la mayoría de los buques existentes (B/T=9,5), debido principalmente a las restricciones en el calado a consecuencia de la escasa profundidad de los ríos. Estos buques están equipados con sistemas de propulsión acimutales tipo “Pum-Jet”. Las particularidades del buque y del ambiente operacional, caracterizado por ríos tropicales con una variabilidad de profundidad dependiente del régimen de lluvias y sequía, así como la falta de canalización y la corriente, hacen que la maniobrabilidad y controlabilidad sean fundamentales para el cumplimiento de su misión; adicionalmente, no existen modelos matemáticos validados que permitan predecir en las primeras etapas del diseño la maniobrabilidad de este tipo de buques con los efectos asociados por profundidad. La presente tesis doctoral aborda el desarrollo de un modelo matemático para simulación de maniobrabilidad en aguas poco profundas de buques con relación manga-calado alta y con propulsores acimutales tipo “Pump-Jet”, cuyo chorro además de entregar el empuje necesario para el avance del buque, genera la fuerza de gobierno en función del ángulo de orientación del mismo, eliminando la necesidad de timones. El modelo matemático ha sido validado mediante los resultados obtenidos en las pruebas de maniobrabilidad a escala real del PAF-P, a través de la comparación de trayectorias, series temporales de las variables de estado más significativas y parámetros del círculo evolutivo como son diámetro de giro, diámetro táctico, avance y transferencia. El plan de pruebas se basó en técnicas de Diseño de Experimentos “DOE” para racionalizar el número de corridas en diferentes condiciones de profundidad, velocidad y orientación del chorro (ángulo de timón). En el marco de la presente investigación y para minimizar los errores por efectos ambientales y por inexactitud en los instrumentos de medición, se desarrolló un sistema de adquisición y procesamiento de datos de acuerdo con los lineamientos de ITTC. La literatura existente describe los efectos negativos de la profundidad en los parámetros de maniobrabilidad de buques convencionales (Efecto tipo S), principalmente las trayectorias descritas en los círculos evolutivos aumentan en la medida que disminuye la profundidad; no obstante, en buques de alta relación manga-calado, B/T=7,51 (Yoshimura, y otros, 1.988) y B/T=6,38 (Yasukawa, y otros, 1.995) ha sido reportado el efecto contrario (Efecto tipo NS Non Standart). Este último efecto sin embargo, ha sido observado mediante experimentación con modelos a escala pero no ha sido validado en pruebas de buques a escala real. El efecto tipo NS en buques dotados con hélice y timones, se atribuye al mayor incremento de la fuerza del timón comparativamente con las fuerzas del casco en la medida que disminuye la profundidad; en el caso de estudio, el fenómeno está asociado a la mejor eficiencia de la bomba de agua “Pump-Jet”, debido a la resistencia añadida en el casco por efecto de la disminución de la profundidad. Los resultados de las pruebas con buque a escala real validan el excelente desempeño de esta clase de buques, cumpliendo en exceso los criterios de maniobrabilidad existentes y muestran que el diámetro de giro y otras características de maniobrabilidad mejoran con la disminución de la profundidad en buques con alta relación manga-calado. ABSTRACT The increasingly demanding requirements in terms of missions, operational and environmental constraints as well as new technologies, constantly impose challenges to naval architects to generate alternatives and asses their performance in the early stages of design. That is the case of Riverine Support Patrol Vessel (RSPV), designed and built by COTECMAR for the Colombian Navy. RSPV are riverine ships with a Beam-Draft ratio exceeding most of existing ships (B/T=9,5), mainly due to the restrictions in draft as a result of shallow water environment. The ships are equipped with azimuthal propulsion system of the “Pump-Jet” type. The peculiarities of the ship and the operational environment, characterized by tropical rivers of variable depth depending on the rain and dry seasons, as well as the lack channels and the effect of water current, make manoeuvrability and controllability fundamental to fulfill its mission; on the other hand, there are not validated mathematical models available to predict the manoeuvrability of such ships with the associated water depth effects in the early stages of design. This dissertation addresses the development of a mathematical model for shallow waters’ manoeuvrability simulation of ships with high Beam-Draft ratio and azimuthal propulsion systems type “Pump-Jet”, whose stream generates the thrust required by the ship to advance and also the steering force depending on the orientation angle, eliminating the need of rudders. The mathematical model has been validated with the results of RSPV’s full scale manoeuvring tests, through a comparison of paths, time series of state variables and other parameters taken from turning tests, such as turning diameter, tactical diameter, advance and transfer. The test plan was developed applying techniques of Design of Experiments “DOE”, in order to rationalize the number of runs in different conditions of water depth, ship speed and jet stream orientation (rudder angle). A data acquisition and processing system was developed, following the guidelines of ITTC, as part of this research effort, in order to minimize errors by environmental effects and inaccuracy in measurement instruments, The negative effects of depth on manoeuvrability parameters for conventional ships (Effect Type S: the path described by the ship during turning test increase with decrease of water depth), has been documented in the open literature; however for wide-beam ships, B/T=7,51 (Yoshimura, y otros, 1.988) and B/T=6,38 (Yasukawa, y otros, 1.995) has been reported the opposite effect (Type NS). The latter effect has been observed thru model testing but until now had not been validated with full-scale results. In ships with propellers and rudders, type NS effect is due to the fact that increment of rudder force becomes larger than hull force with decrease of water depth; in the study case, the phenomenon is associated with better efficiency of the Pump-Jet once the vessel speed becomes lower, due to hull added resistance by the effect of the decrease of water depth. The results of full scale tests validates the excellent performance of this class of ships, fulfilling the manoeuvrability criteria in excess and showing that turning diameter and other parameters in high beam-draft ratio vessels do improve with the decrease of depth.

Influence of nutritional and management practices on productive performance and egg quality of brown egg-laying hens = Influencia de factores nutricionales y de manejo sobre la productividad y calidad del huevo en gallinas ponedoras rubias

El objetivo general de esta Tesis Doctoral fue estudiar la influencia de diversos factores nutricionales y de manejo sobre la productividad y la calidad del huevo en gallinas ponedoras comerciales rubias. Los factores estudiados fueron: 1) Cereal principal y tipo de grasa en la dieta; 2) Nivel de proteína bruta y grasa en la dieta; 3) Nivel energético de la dieta; 4) Peso vivo al inicio del período de puesta. En el experimento 1, la influencia del cereal principal en la dieta y el tipo de grasa suplementada en la dieta sobre los parámetros productivos y la calidad del huevo fue estudiado en 756 gallinas rubias de la estirpe Lohmann desde la sem 22 hasta las 54 de vida. El experimento se realizó mediante un diseño completamente al azar con 9 tratamientos ordenados factorialmente, con 3 cereales bases (maíz, trigo blando y cebada) y 3 tipos de grasa que variaban en su contenido en ácido linoléico (aceite de soja, oleína vegetal mezcla y manteca). Todas las dietas satisfacian las recomendaciones nutricionales para gallinas ponedoras rubias según el NRC (1994) y FEDNA (2008). La unidad experimental fue la jaula para todas las variables. Cada tratamiento fue replicado 4 veces, y la unidad experimental estuvo formada por 21 gallinas alojadas en grupos de 7. Las dietas fueron formuladas con un contenido nutritivo similar, excepto para el ácido linoléico, que varió en función del tipo de cereal y grasa utilizado. Así, dependiendo de la combinación de estos elementos el contenido de este ácido graso varió desde un 0.8% (dieta trigo-manteca) a un 3.4% (dieta maíz-aceite de soja). Este rango de ácido linoléico permitió estimar el nivel mínimo de este nutriente en el pienso que permite maximizar el peso del huevo. Los parámetros productivos y la calidad del huevo se controlaron cada 28 días y el peso de las aves se midió individualmente al inicio y al final del experimento con el objetivo de estudiar la variación en el peso vivo de los animales. No se observaron interacciones entre el tipo de cereal y grasa en la dieta para ninguna de las variables productivas estudiadas. Los tratamientos experimentales no afectaron a las principales variables productivas (porcentaje de puesta, peso del huevo y masa de huevo). Sin embargo, la ganancia de peso fue mayor en gallinas alimentadas con maíz o trigo que las gallinas alimentadas con cebada (243 vs. 238 vs. 202 g, respectivamente; P< 0.05). En el mismo sentido, las gallinas alimentadas con manteca obtuvieron una mayor ganancia de peso que las gallinas alimentadas con aceite de soja u oleína vegetal (251 vs. 221 vs. 210 g, respectivamente; P< 0.05). En cuanto a las variables estudiadas en relación con la calidad del huevo, ninguna de las variables estudiadas se vio afectada por el tratamiento experimental, salvo la pigmentación de la yema. Así, las gallinas alimentadas con maíz como cereal principal obtuvieron una mayor puntuación en relación con la escala de color que las gallinas alimentadas con trigo y con cebada (9.0 vs. 8.3 vs. 8.3, respectivamente; P< 0.001). La pigmentación de la yema también se vio afectada por el tipo de grasa en la dieta, así, las gallinas alimentadas con manteca obtuvieron una mayor puntuación de color en relación con la escala de color que las gallinas alimentadas con aceite de soja u oleína vegetal (8.9 vs. 8.5 vs. 8.2, respectivamente; P< 0.001). La influencia del contenido en ácido linoléico respecto al peso de huevo y masa de huevo fue mayor a medida que el contenido de dicho ácido graso se redujo en la dieta. Así, la influencia de la dieta en los radios peso de huevo/g linoléico ingerido y masa de huevo/g linoléico ingerido fue significativamente mayor a medida que el contenido en dicho ácido graso disminuyo en la dieta (P< 0.001). Los resultados del ensayo indican que las gallinas ponedoras rubias no necesitan más de un 1.0% de ácido linoléico en la dieta para maximizar la producción y el tamaño del huevo. Además, se pudo concluir que los 3 cereales y las 3 grasas utilizadas pueden sustituirse en la dieta sin ningún perjuicio productivo o referente a la calidad del huevo siempre que los requerimientos de los animales sean cubiertos. En el experimento 2, la influencia del nivel de proteína bruta y el contenido de grasa de la dieta sobre los parámetros productivos y la calidad del huevo fue estudiado en 672 gallinas ponedoras rubias de la estirpe Lohmann entre las sem 22 y 50 de vida. El experimento fue conducido mediante un diseño completamente al azar con 8 tratamientos ordenados factorialmente con 4 dietas y 2 pesos vivos distintos al inicio de puesta (1592 vs. 1860g). Tres de esas dietas diferían en el contenido de proteína bruta (16.5%, 17.5% y 18.5%) y tenían un contenido en grasa añadida de 1.8%. La cuarta dieta tenía el nivel proteico más elevado (18.5%) pero fue suplementada con 3.6% de grasa añadida en vez de 1.8%. Cada tratamiento fue replicado 4 veces y la unidad experimental consistió en 21 gallinas alojadas dentro de grupos de 7 animales en 3 jaulas contiguas. Todas las dietas fueron isocalóricas (2750 kcal EMAn/kg) y cubrieron las recomendaciones en aminoácidos para gallinas ponedoras rubias (Arg, Ile, Lys, Met, Thr, Trp, TSAA y Val) según el NRC (1994) y FEDNA (2008). Los efectos de los tratamientos sobre las variables productivas y la calidad de huevo fueron estudiados cada 28 días. La dieta no afecto a ninguna de las variables productivas estudiadas a lo largo del período productivo. Sin embargo, el peso inicial origino que las gallinas pesadas consumieran más (120.6 vs. 113.9 g; P< 0.001), obtuvieran un porcentaje de puesta mayor (92.5 vs. 89.8%; P< 0.01) y un peso del huevo mayor (64.9 vs. 62.4 g; P< 0.001) que las gallinas ligeras. El peso inicial de las gallinas no afecto al IC por kg de huevo ni a la mortalidad, sin embargo, la ganancia de peso fue mayor (289 vs. 233 g; P< 0.01) y el IC por docena de huevos fue mejor (1.52 vs. 1.57; P< 0.01) en las gallinas ligeras que en las gallinas pesadas. En cuanto a la calidad del huevo, la dieta no influyó sobre ninguna de las variables estudiadas. Los resultados del ensayo muestran que las gallinas ponedoras rubias, independientemente de su peso vivo al inicio de la puesta, no necesitan una cantidad de proteína bruta superior a 16.5% para maximizar la producción, asegurando que las dietas cubren los requerimientos en AA indispensables. Asimismo, se puedo concluir que las gallinas con un peso más elevado al inicio de puesta producen más masa de huevo que las gallinas con un peso más bajo debido a que las primeras producen más cantidad de huevos y más pesados. Sin embargo, ambos grupos de peso obtuvieron el mismo IC por kg de huevo y las gallinas más livianas en peso obtuvieron un mejor IC por docena de huevo que las pesadas. En el experimento 3 la influencia de la concentración energética sobre los parámetros productivos y la calidad del huevo fue estudiada en 520 gallinas ponedoras rubias de la estirpe Hy-Line en el período 24-59 sem de vida. Se utilizaron 8 tratamientos ordenados factorialmente con 4 dietas que variaron en el contenido energético (2650, 2750, 2850 y 2950 kcal EMAn/kg) y 2 pesos vivos distintos al inicio del período de puesta (1733 vs. 1606g). Cada tratamiento fue replicado 5 veces y la unidad experimental consistió en una jaula con 13 aves. Todas las dietas se diseñaron para que tuvieran una concentración nutritiva similar por unidad energética. Las variables productivas y de calidad de huevo se estudiaron mediante controles cada 28 días desde el inicio del experimento. No se observaron interacciones entre el nivel energético y el peso inicial del ave para ninguna de las variables estudiadas. Un incremento en la concentración energética de la dieta incrementó la producción de huevos (88.8 % vs. 91.2 % vs. 92.7 % vs. 90.5 %), masa de huevo (56.1 g/d vs. 58.1 g/d vs. 58.8 g/d vs. 58.1 g/d), y eficiencia energética (5.42 vs. 5.39 vs. 5.38 vs. 5.58 kcal EMA/g huevo) de forma lineal y cuadrática (P< 0.05) y afectó significativamente a la ganancia de peso (255 g vs. 300 g vs. 325 g vs. 359 g; P<0.05) . Sin embargo, un incremento en la concentración energética provocó un descenso lineal en el consumo de los animales (115 g vs. 114 g vs. 111 g vs. 110 g; P< 0.001) y un descenso lineal y cuadrático en el IC por kg de huevo (2.05 vs. 1.96 vs. 1.89 vs. 1.89; P< 0.01). En cuanto a la calidad del huevo, un incremento en el contenido energético de la dieta provocó una reducción en la calidad del albumen de forma lineal en forma de reducción de Unidades Haugh (88.4 vs. 87.8 vs. 86.3 vs. 84.7; P< 0.001), asimismo el incremento de energía redujo de forma lineal la proporción relativa de cáscara en el huevo (9.7 vs. 9.6 vs. 9.6 vs. 9.5; P< 0.001). Sin embargo, el incremento energético propició un incremento lineal en la pigmentación de la yema del huevo (7.4 vs. 7.4 vs. 7.6 vs. 7.9; P< 0.001). El peso vivo al inicio de la prueba afecto a las variables productivas y a la calidad del huevo. Así, los huevos procedentes de gallinas pesadas al inicio de puesta tuvieron una mayor proporción de yema (25.7 % vs. 25.3 %; P< 0.001) y menor de albumen (64.7 vs. 65.0; P< 0.01) y cáscara (9.5 vs. 9.6; P< 0.05) respecto de los huevos procedentes de gallinas ligeras. Consecuentemente, el ratio yema:albumen fue mayor (0.40 vs. 0.39; P< 0.001) para las gallinas pesadas. Según los resultados del experimento se pudo concluir que las actuales gallinas ponedoras rubias responden con incrementos en la producción y en la masa del huevo a incrementos en la concentración energética hasta un límite que se sitúa en 2850 kcal EMAn/kg. Asimismo, los resultados obtenidos entre los 2 grupos de peso al inicio de puesta demostraron que las gallinas pesadas al inicio de puesta tienen un mayor consumo y producen huevos más pesados, con el consecuente aumento de la masa del huevo respecto de gallinas más ligeras. Sin embargo, el IC por kg de huevo fue el mismo en ambos grupos de gallinas y el IC por docena de huevo fue mejor en las gallinas ligeras. Asimismo, la eficiencia energética fue mejor en las gallinas ligeras. Abstract The general aim of this PhD Thesis was to study the influence of different nutritional factors and management on the productivity and egg quality of comercial Brown laying hens. The factor studied were: 1) The effect of the main cereal and type of fat of the diet; 2) The effect of crude protein and fat content of the diet; 3) The effect of energy concentration of the diet; 4) The effect of initial body weight of the hens at the onset of lay period. In experiment 1, the influence of the main cereal and type of supplemental fat in the diet on productive performance and egg quality of the eggs was studied in 756 Lohmann brown-egg laying hens from 22 to 54 wk of age. The experiment was conducted as a completely randomized design with 9 treatments arranged factorially with 3 cereals (dented corn, soft wheat, and barley) and 3 types of fat (soy oil, acidulated vegetable soapstocks, and lard). Each treatment was replicated 4 times (21 hens per replicate). All diets were formulated according to NRC (1994) and FEDNA (2008) to have similar nutrient content except for linoleic acid that ranged from 0.8 (wheat-lard diet) to 3.4% (corn-soy bean oil) depending on the combination of cereal and fat source used. This approach will allow to estimate the minimum level of linoleic acid in the diets that maximizes egg weight. Productive performance and egg quality traits were recorded every 28 d and BW of the hens was measured individually at the beginning and at the end of the experiment. No significant interactions between main factors were detected for any of the variables studied. Egg production, egg weight, and egg mass were not affected by dietary treatment. Body weight gain was higher (243 vs. 238 vs. 202 g; P<0.05) for hens fed corn or wheat than for hens fed barley and also for hens fed lard than for hens fed soy oil or acidulated vegetable soapstocks (251 vs. 221 vs. 210 g; P< 0.05). Egg quality was not influenced by dietary treatment except for yolk color that was greater (9.0 vs. 8.3 vs. 8.3; P< 0.001) for hens fed corn than for hens fed wheat or barley and for hens fed lard than for hens fed soy oil or acidulated vegetable soapstocks (8.9 vs. 8.5 vs. 8.2, respectivamente; P< 0.001). The influence of linoleic acid on egg weight and egg mass was higher when the fatty acid was reduced in the diet. Thus, the influence of the diet in egg weight/g linoleic acid intake and egg mass/g linolec acid intake was higher when the amount of this fatty acid decreased in the diet (P< 0.001). It is concluded that brown egg laying hens do not need more than 1.0% of linoleic acid in the diet (1.16 g/hen/d) to maximize egg production and egg size. The 3 cereals and the 3 fat sources tested can replace each other in the diet provided that the linoleic acid requirements to maximize egg size are met. In experiment 2, the influence of CP and fat content of the diet on performance and egg quality traits was studied in 672 Lohmann brown egg-laying hens from 22 to 50 wk of age. The experiment was conducted as a completely randomized design with 8 treatments arranged factorially with 4 diets and 2 initial BW of the hens (1,592 vs. 1,860 g). Three of these diets differed in the CP content (16.5, 17.5, and 18.5%) and included 1.8% added fat. The fourth diet had also 18.5% CP but was supplemented with 3.6% fat instead of 1.8% fat. Each treatment was replicated 4 times and the experimental unit consisted of 21 hens allocated in groups of 7 in 3 adjacent cages. All diets were isocaloric (2,750 kcal AME/kg) and met the recommendations of brown egg-laying hens for digestible Arg, Ile, Lys, Met, Thr, Trp, TSAA, and Val. Productive performance and egg quality were recorded by replicate every 28-d. For the entire experimental period, diet did not affect any of the productive performance traits studied but the heavier hens had higher ADFI (120.6 vs. 113.9g; P< 0.001), egg production (92.5 vs. 89.8%; P< 0.01), and egg weight (64.9 vs. 62.4g; P< 0.001) than the lighter hens. Initial BW did not affect feed conversion per kilogram of eggs or hen mortality but BW gain was higher (289 vs. 233g; P< 0.01) and FCR per dozen of eggs was better (1.52 vs. 1.57; P< 0.01) for the lighter than for the heavier hens. None of the egg quality variables studied was affected by dietary treatment or initial BW of the hens. It is concluded that brown egg-laying hens, irrespective of their initial BW, do not need more than 16.5% CP to maximize egg production provided that the diet meet the requirements for key indispensable amino acids. Heavier hens produce more eggs that are larger than lighter hens but feed efficiency per kilogram of eggs is not affected. In experiment 3, the influence of AMEn concentration of the diet on productive performance and egg quality traits was studied in 520 Hy-Line brown egg-laying hens differing in initial BW from 24 to 59 wks of age. There were 8 treatments arranged factorially with 4 diets varying in energy content (2,650, 2,750, 2,850, and 2,950 kcal AMEn/kg) and 2 initial BW of the hens (1,733 vs. 1,606 g). Each treatment was replicated 5 times (13 hens per replicate) and all diets had similar nutrient content per unit of energy. No interactions between energy content of the diet and initial BW of the hens were detected for any trait. An increase in energy concentration of the diet increased (linear, P< 0.05; quadratic P< 0.05) egg production (88.8 % vs. 91.2 % vs. 92.7 % vs. 90.5 %), egg mass (56.1 g/d vs. 58.1 g/d vs. 58.8 g/d vs. 58.1 g/d), energy efficiency (5.42 vs. 5.39 vs. 5.38 vs. 5.58 kcal AMEn/g of egg), and BW gain (255 g vs. 300 g vs. 325 g vs. 359 g; P<0.05) but decreased ADFI (115 g vs. 114 g vs. 111 g vs. 110 g; P< linear, P< 0.001) and FCR per kg of eggs (2.05 vs. 1.96 vs. 1.89 vs. 1.89; linear, P< 0.01; quadratic P< 0.01). An increase in energy content of the diet reduced Haugh units (88.4 vs. 87.8 vs. 86.3 vs. 84.7; P< 0.01) and the proportion of shell in the egg (9.7 vs. 9.6 vs. 9.6 vs. 9.5; P< 0.001). Feed intake (114.6 vs. 111.1 g/hen per day), AMEn intake (321 vs. 311 kcal/hen per day), egg weight (64.2 vs. 63.0 g), and egg mass (58.5 vs. 57.0 g) were higher for the heavier than for the lighter hens (P<0.01) but FCR per kg of eggs and energy efficiency were not affected. Eggs from the heavier hens had higher proportion of yolk (25.7 % vs. 25.3 %; P< 0.001) and lower of albumen (64.7 vs. 65.0; P< 0.01) and shell (9.5 vs. 9.6; P< 0.05) than eggs from the lighter hens. Consequently, the yolk to albumen ratio was higher (0.40 vs. 0.39; P< 0.001) for the heavier hens. It is concluded that brown egg-laying hens respond with increases in egg production and egg mass, to increases in AMEn concentration of the diet up to 2,850 kcal/kg. Heavy hens had higher feed intake and produced heavier eggs and more egg mass than light hens. However, energy efficiency was better for the lighter hens.

A review of the potential of renewable energy sources for the State of Jammu and Kashmir (India)

The future economic development trajectory for India is likely to result in rapid and accelerated growth in energy demand, with expected shortages. Many of its current policies and strategies are aimed at the improvement and possible maximization of energy production from the renewable sector. It is also clear that while energy-conservation and energy-efficiency can make an important contribution in the national energy strategy, renewable energies will be essential to the solution and are likely to play an increasingly important role for the growth of grid power, providing energy access, reducing consumption of fossil fuels, and helping India pursue its low carbon progressive pathway. However, most of the states in India, like the northernmost State of Jammu and Kashmir (J&K), have experienced an energy crisis over a sustained period of time. As India intends to be one of the emerging powers of the 21st century, it has to embark upon with these pressing issues in a more sustainable manner and accordingly initiate various renewable energy projects within these states. This paper will provide a broad-spectrum view about the energy situation within J&K and will highlight the current policies along with future strategies for the optimal utilization of renewable energy resources.

Potential of the renewable energy development in Jammu and Kashmir, India

The future economic growth for India is likely to result in rapid and accelerated surge in energy demand, with expected shortages in terms of supply. Many of its current policies and strategies are aimed at the improvement and possible maximization of energy production from the renewable sector. It is also clear that while energy conservation and energy efficiency can make an important contribution, renewable energies will be essential to the solution and are likely to play an increasingly important role for providing enhanced energy access, reducing consumption of fossil fuels, and helping India pursue its low-carbon progressive pathway. However, most of the states in India, like the northernmost state of Jammu and Kashmir, have experienced an energy crisis over a sustained period of time and the government both at center and state level has to embark upon with these pressing issues in a more sustainable manner and accordingly initiate various renewable energy projects within these states. This paper will provide a broad-spectrum view about the energy situation within Jammu and Kashmir and will highlight the current policies along with future strategies for the optimal utilization of renewable energy resources.

Simulation of academic performance rates, estimation of indicators of subjects and of a complete degree

The purpose of this paper is to present a program written in Matlab-Octave for the simulation of the time evolution of student curricula, i.e, how students pass their subjects along time until graduation. The program computes, from the simulations, the academic performance rates for the subjects of the study plan for each semester as well as the overall rates, which are a) the efficiency rate defined as the ratio of the number of students passing the exam to the number of students who registered for it and b) the success rate, defined as the ratio of the number of students passing the exam to the number of students who not only registered for it but also actually took it. Additionally, we compute the rates for the bachelor academic degree which are established for Spain by the National Quality Evaluation and Accreditation Agency (ANECA) and which are the graduation rate (measured as the percentage of students who finish as scheduled in the plan or taking an extra year) and the efficiency rate (measured as the percentage of credits which a student who graduated has really taken). The simulation is done in terms of the probabilities of passing all the subjects in their study plan. The application of the simulator to Polytech students in Madrid, where requirements for passing are specially stiff in first and second year subjects, is particularly relevant to analyze student cohorts and the probabilities of students finishing in the minimum of four years, or taking and extra year or two extra years, and so forth. It is a very useful tool when designing new study plans. The calculation of the probability distribution of the random variable "number of semesters a student has taken to complete the curricula and graduate" is difficult or even unfeasible to obtain analytically, and this is even truer when we incorporate uncertainty in parameter estimation. This is why we apply Monte Carlo simulation which not only provides illustration of the stochastic process but also a method for computation. The stochastic simulator is proving to be a useful tool for identification of the subjects most critical in the distribution of the number of semesters for curriculum vitae (CV) completion and subsequently for a decision making process in terms of CV planning and passing standards in the University. Simulations are performed through a graphical interface where also the results are presented in appropriate figures. The Project has been funded by the Call for Innovation in Education Projects of Universidad Politécnica de Madrid (UPM) through a Project of its school Escuela Técnica Superior de Ingenieros Industriales ETSII during the period September 2010-September 2011.

In-situ optical reflectance characterization of ion beam irradiation damage on crystalline (quartz) and amorphous (silica) SiO2

Outline: • Motivation, aim • Complement waveguide data on silica • Optical data in quartz • Detailed analysis, i.e. both fluence kinetics and resolution • Efficiency of irradiation and analysis, samples, time... • Experimental set-up description • Reflectance procedure • Options: light source (lasers, white light..), detectors, configurations • Results and discussion • Comparative of amorphous and crystalline phases