A decision support process to compare Riparian revegetation options in Scheu Creek catchment in North Queensland

While riparian vegetation can play a major role in protecting land, water and natural habitat in catchments, there are high costs associated with tree planting and establishment and in diverting land from cropping. The distribution of costs and benefits of riparian revegetation creates conflicts in the objectives of various stakeholder groups. Multicriteria analysis provides an appropriate tool to evaluate alternative riparian revegetation options, and to accommodate the conflicting views of various stakeholder groups. This paper discusses an application of multicriteria analysis in an evaluation of riparian revegetation policy options for Scheu Creek, a small sub-catchment in the Johnstone River catchment in north Queensland, Australia. Clear differences are found in the rankings of revegetation options for different stakeholder groups with respect to environmental, social and economic impacts. Implementation of a revegetation option will involve considerable cost for landholders for the benefits of society. Queensland legislation does not provide a means to require farmers to implement riparian revegetation, hence the need for subsidies, tau incentives and moral suasion. (C) 2001 Academic Press.

CTQ process flow development and the impact for cost of quality

Tämä työ tehtiin Kone Industrial Oy:lle Major Projects yksikköön, laatuosastolle. Kone Major Projects yksikkö keskittyy erikoisiin ja suuriin hissi- ja liukuporras projekteihin. Työn tavoitteena oli luoda harmonisoitu prosessi hissikomponenttien laaduntarkkailua varten sekä tarkastella ja vertailla kustannussäästöjä, jota tällä uudella prosessilla voidaan saavuttaa. Tavoitteena oli saavuttaa 80-prosentin kustannussäästöt laatukustannuksissa uuden laatuprosessin avulla. Työn taustana ja tutkimusongelmana ovat lisääntyneet erikoisprojektit ja niiden myötä lisääntynyt laaduntarkkailun tarve. Ongelmana laaduntarkkailussa voitiin pitää harmonisoidun ja selkeän prosessin puuttumista C-prosessikomponenttien valmistuksessa. Lisäksi kehitysprosessin aikana luotiin vanhojen työkalujen pohjalta keskeinen laaduntarkkailutyökalu, CTQ-työkalu. Työssä käsitellään ensin Konetta yhtiönä ja selvitetään Koneen keskeisimmät prosessit työn taustaksi. Teoria osuudessa käsitellään prosessin kehitykseen liittyviä teorioita sekä yleisiä laatukäsitteitä ja esitetään teorioita laadun asemasta nykypäivänä. Lopuksi käsitellään COQ eli laatukustannusten teoriaa ja esitellään teoria PAF-analyysille, jota käytetään työssä laatukustannusten vertailuun case esimerkin avulla. Työssä kuvataan CTQ prosessin luominen alusta loppuun ja case esimerkin avulla testataan uutta CTQ prosessia pilottihankkeessa. Tässä case esimerkissä projektin bracket eli johdekiinnitysklipsi tuotetaan uuden laatuprosessin avulla sekä tehdään kustannusvertailu saman projektin toisen bracketin kanssa, joka on tuotettu ennen uuden laatuprosessin implementoimista. Työn lopputuloksena CTQ prosessi saatiin luotua ja sitä pystyttiin testaamaan käytännössä case esimerkin avulla. Tulosten perusteella voidaan sanoa, että CTQ prosessin käyttö vähentää laatukustannuksia huomattavasti ja helpottaa laadunhallintaa C-prosessikomponenttien tuotannossa.

Developing the Product Return Process of a Service Center With Lean Methods

Today lean-philosophy has gathered a lot of popularity and interest in many industries. This customer-oriented philosophy helps to understand customer’s value creation which can be used to improve efficiency. A comprehensive study of lean and lean-methods in service industry were created in this research. In theoretical part lean-philosophy is studied in different levels which will help to understand its diversity. To support lean, this research also presents basic concepts of process management. Lastly theoretical part presents a development model to support process development in systematical way. The empirical part of the study was performed by performing experimental measurements during the service center’s product return process and by analyzing this data. Measurements were used to map out factors that have a negative influence on the process flow. Several development propositions were discussed to remove these factors. Problems mainly occur due to challenges in controlling customers and due to the lack of responsibility and continuous improvement on operational level. Development propositions concern such factors as change in service center’s physical environment, standardization of work tasks and training. These factors will remove waste in the product return process and support the idea of continuous improvement.

A formalism and method for representing and reasoning with process models authored by subject matter experts

Enabling Subject Matter Experts (SMEs) to formulate knowledge without the intervention of Knowledge Engineers (KEs) requires providing SMEs with methods and tools that abstract the underlying knowledge representation and allow them to focus on modeling activities. Bridging the gap between SME-authored models and their representation is challenging, especially in the case of complex knowledge types like processes, where aspects like frame management, data, and control flow need to be addressed. In this paper, we describe how SME-authored process models can be provided with an operational semantics and grounded in a knowledge representation language like F-logic in order to support process-related reasoning. The main results of this work include a formalism for process representation and a mechanism for automatically translating process diagrams into executable code following such formalism. From all the process models authored by SMEs during evaluation 82% were well-formed, all of which executed correctly. Additionally, the two optimizations applied to the code generation mechanism produced a performance improvement at reasoning time of 25% and 30% with respect to the base case, respectively.

National whoppercropper - risk management discussion support software

It is a paradox that in a country with one of the most variable climates in the world, cropping decisions are sometimes made with limited consideration of production and resource management risks. There are significant opportunities for improved performance based on targeted information regarding risks resulting from decision options. WhopperCropper is a tool to help agricultural advisors and farmers capture these benefits and use it to add value to their intuition and experience. WhopperCropper allows probability analysis of the effects of a range of selectable crop inputs and existing resources on yield and economic outcomes. Inputs can include agronomic inputs (e.g crop type, N fertiliser rate), resources (e.g soil water at sowing), and seasonal climate forecast (SOI phase). WhopperCropper has been successfully developed and refined as a discussion-support process for decision makers and their advisers in the northern grains region of Australia. The next phase of the project will build on the current project by extending its application nationally and enhancing the resource management aspects. A commercial partner, with over 800 advisor clients nationally, will participate in the project.

Business process orientated holonic (PrOH) modeling

Purpose: The purpose of this paper is to describe how the application of systems thinking to designing, managing and improving business processes has resulted in a new and unique holonic-based process modeling methodology know as process orientated holonic modeling. Design/methodology/approach: The paper describes key systems thinking axioms that are built upon in an overview of the methodology; the techniques are described using an example taken from a large organization designing and manufacturing capital goods equipment operating within a complex and dynamic environment. These were produced in an 18 month project, using an action research approach, to improve quality and process efficiency. Findings: The findings of this research show that this new methodology can support process depiction and improvement in industrial sectors which are characterized by environments of high variety and low volume (e.g. projects; such as the design and manufacture of a radar system or a hybrid production process) which do not provide repetitive learning opportunities. In such circumstances, the methodology has not only been able to deliver holonic-based process diagrams but also been able to transfer strategic vision from top management to middle and operational levels without being reductionistic. Originality/value: This paper will be of interest to organizational analysts looking at large complex projects whom require a methodology that does not confine them to thinking reductionistically in "task-breakdown" based approaches. The novel ideas in this paper have great impact on the way analysts should perceive organizational processes. Future research is applying the methodology in similar environments in other industries. © Emerald Group Publishing Limited.

Towards the Problems of an Evaluation of Data Uncertainty in Decision Support Systems

The question of forming aim-oriented description of an object domain of decision support process is outlined. Two main problems of an estimation and evaluation of data and knowledge uncertainty in decision support systems – straight and reverse, are formulated. Three conditions being the formalized criteria of aimoriented constructing of input, internal and output spaces of some decision support system are proposed. Definitions of appeared and hidden data uncertainties on some measuring scale are given.

PROPOSAL OF A PERFORMANCE MEASURING SYSTEM APPLIED TO AGRICULTURAL MECHANIZATION

The leaders` organizations of several different sectors have as characteristic to measure their own performance in a systematic way. However, this concept is still unusual in agricultural enterprises, including the mechanization sector. Mechanization has an important role on the production costs and to know its performance is a key factor for the agricultural enterprise success. This work was generated by the importance that measurement of performance has for the management and the mechanization impact on the production costs. Its aim is to propose an integrated performance measurement system to give support to agricultural management. The methodology was divided in two steps: adjustment of a conceptual model based on Balanced Score Card - BSC; application of the model in a study case at sugar cane mill. The adjustment and the application of the conceptual model allowed to obtain the performance index in a systematic way, that are associated to: costs and deadline ( traditionally used); control and improvement on the quality of operations and support process; environmental preservation; safety; health; employees satisfaction; development of information systems. The adjusted model helped the development of the performance measurement system for the mechanized management systems and the index allows an integrated view of the enterprise, related to its strategic objectives.

ERP- järjestelmän tukiprosessin nykytilan analyysi ja prosessin kehittäminen

Diplomityön tavoitteena oli tunnistaa kohdeyrityksessä kehitysmahdollisuuksia. Kehitysmahdollisuuksien etsiminen käyttäjätukiprosessin aloitettiin prosessin nykytilan analysoinnilla, jolla pyrittiin tunnistamaan prosessin ominaisuuksia sekä ongelma-alueita, joita korjaamalla prosessia voitiin tehostaa. Tutkimus on jaettu teoria ja empiria osaan.Teorian alussa käsitellään tietotekniikkapalveluiden organisointia, jotta ymmärretään toiminnanohjausjärjestelmien ja niihin liittyvien tukiprosessien merkitys yrityksissä. Tämän jälkeen perehdytään prosessijohtamiseen ja sen keinoihin liiketoimintaprosessien kehittämiseen. Tuloksena voidaan sanoa, että prosessien virtaviivaistaminen on nopea ja edullinen tapa tehostaa prosessin toimintaa ja päivittää vanha prosessi vastaamaan yrityksen nykyisiä tarpeita. Prosessien virtaviivaistamisella ei saada suuria kustannussäästöjä, vaan hyödyt liittyvät prosessin tehostumiseen. Virtaviivaistetusta prosessista on poistettu turhat toiminnot ja se on suunniteltu vastaamaan tarkoitustaan parhaalla mahdollisella tavalla. Näin prosessin virtaviivaistaminen lisää myös asiakkaan kokemaa arvoa.

Prosessilähtöisen laadunhallintajärjestelmän sopeuttaminen perinteiseen linjaorganisaatioon.

Työn tavoitteena oli perehtyä prosessilähtöisen laadunhallintajärjestelmän sopeuttamiseen perinteiseen linjaorganisaatioon. Kirjallisuuslähteitä apuna käyttäen perehdyttiin laadunhallintajärjestelmästandardien vaatimuksiin ja organisaatioiden erilaisiin johtamismalleihin. Prosessilähtöisen toimintamallin sopeuttamiseen linjaorganisaatioon liittyy olennaisesti esitutkimus, jonka avulla saadaan tietoa organisaation senhetkisestä tilasta. Tämä esitutkimus suoritettiin kohdeyrityksen henkilöstön keskuudessa eri tutkimusmenetelmiä käyttäen. Saaduista esitutkimuksen tuloksista yrityksen johto voi päättää toimenpiteistä, joilla edesautetaan uuden toimintamallin ja samalla yrityksen vision, strategioiden sekä arvojen saattamista käytännön toimintaan. Uusi prosessilähtöinen laadunhallintajärjestelmä, ISO 9001 -standardi, asettaa niin kyseisen laadunhallintajärjestelmän omaaville kuin sitä tavoittelevillekin yrityksille uudet vaatimukset. Pukkila Oy Ab:n lähtiessä täyttämään näitä vaatimuksia se on kokonaan nykyisestä poikkeavan toimintamallin edessä, joka edellyttää muutosta koko organisaatiolta. Prosessilähtöinen toimintamalli vaatii kokonaan nykyisen toimintamallin kyseenalaistamista, jolloin muutos kohdistuu myös nykyiseen yrityksen johtamisjärjestelmään. Laadunhallintajärjestelmä painottaa tässä toimintamallissa asiakaslähtöistä ajattelutapaa sekä toiminnallisella että teknillisellä puolella. Toimenpidesuosituksena yrityksen johdolle esitetään perehtymistä organisaation eri tasojen yhteiseen sosiaaliseen todellisuuteen sekä muuttamaan osastopohjainen johtamisjärjestelmä prosessilähtöistä toimintaa tukevaksi.

Liiketoimintaprosessien kuvaaminen Corenson kartonki- ja hylsyteollisuudessa

Prosessijohtamisen soveltaminen on käynnistynyt teollisuudessa kovan kansainvälisen kilpailun kiristyessä. Organisaatiot ovat irrottautuneet funktionaalisen toimintatavan yksiköistä ja siirtyneet prosessipohjaiseen toimintatapaan. Tärkeimpänä tavoitteena prosessijohtamisella on oman toiminnan tehostaminen, asiakaslähtöisyys ja jatkuva parantaminen.Tässä työssä teoriaosassa kirjallisuuden avulla esitetään prosessipohjainen toimintatapa eroten funktionaalisesta toimintatavasta ja eteneminen organisaatiossa prosessijohtajuuteen prosessien tunnistamisen ja kuvaamisen kautta. Käytännön osuudessa on tunnistettu Corenson ydin- ja tukiprosessit, kuvattu yksityiskohtaisesti hylsyteollisuuden tilaus-tuotanto-toimitus- prosessi sekä etsitty ko. prosessille mittarit.Työn tärkeimpänä tavoitteena on aloittaa prosessipohjainen toimintatapa Corenson Loviisan hylsytehtaalla vierittäen kuvaustekniikoita ja mittareiden laadintaa muihin yksiköihin. Kaikkien toimintatapojen muuttaminen ja johtaminen prosessimaisiksi tulee viemään organisaatioissa useita vuosia.

Virtual communities : a virtual treasure trove for end-user developers

End-user development is a very common but often largely overlooked phenomenon in information systems research and practice. End-user development means that regular people, the end-users of software, and not professional developers are doing software development. A large number of people are directly or indirectly impacted by the results of these non-professional development activities. The numbers of users performing end-user development activities are difficult to ascertain precisely. But it is very large, and still growing. Computer adoption is growing towards 100% and many new types of computational devices are continually introduced. In addition, other devices not previously programmable are becoming so. This means that, at this very moment, hundreds of millions of people are likely struggling with development problems. Furthermore, software itself is continually being adapted for more flexibility, enabling users to change the behaviour of their software themselves. New software and services are helping to transform users from consumers to producers. Much of this is now found on-line. The problem for the end-user developer is that little of this development is supported by anyone. Often organisations do not notice end-user development and consequently neither provide support for it, nor are equipped to be able to do so. Many end-user developers do not belong to any organisation at all. Also, the end-user development process may be aggravating the problem. End-users are usually not really committed to the development process, which tends to be more iterative and ad hoc. This means support becomes a distant third behind getting the job done and figuring out the development issues to get the job done. Sometimes the software itself may exacerbate the issue by simplifying the development process, deemphasising the difficulty of the task being undertaken. On-line support could be the lifeline the end-user developer needs. Going online one can find all the knowledge one could ever need. However, that does still not help the end-user apply this information or knowledge in practice. A virtual community, through its ability to adopt the end-user’s specific context, could surmount this final obstacle. This thesis explores the concept of end-user development and how it could be supported through on-line sources, in particular virtual communities, which it is argued here, seem to fit the end-user developer’s needs very well. The experiences of real end-user developers and prior literature were used in this process. Emphasis has been on those end-user developers, e.g. small business owners, who may have literally nowhere to turn to for support. Adopting the viewpoint of the end-user developer, the thesis examines the question of how an end-user could use a virtual community effectively, improving the results of the support process. Assuming the common situation where the demand for support outstrips the supply.

Aplicació d'algoritmes genètics en l'optimització dels processos de fabricació del paper

La creciente preocupación y concienciación de la sociedad respecto el medio ambiente, y en consecuencia la legislación y regulaciones generadas inducen a la modificación de los procesos productivos existentes en la industria química. Las configuraciones iniciales deben modificarse para conseguir una mayor integración de procesos. Para este fin se han creado y desarrollado diferentes metodologías que deben facilitar la tarea a los responsables del rediseño. El desarrollo de una metodología y herramientas complementarias es el principal objetivo de la investigación aquí presentada, especialmente centrada en el desarrollo y la aplicación de una metodología de optimización de procesos. Esta metodología de optimización se aplica sobre configuraciones de proceso existentes y pretende encontrar nuevas configuraciones viables según los objetivos de optimización fijados. La metodología tiene dos partes diferenciadas: la primera se basa en un simulador de procesos comercial y la segunda es la técnica de optimización propiamente dicha. La metodología se inicia con la elaboración de una simulación convenientemente validada que reproduzca el proceso existente, en este caso una papelera no integrada que produce papel estucado de calidad, para impresión. A continuación la técnica de optimización realiza una búsqueda dentro del dominio de los posibles resultados, en busca de los mejores resultados que satisfazcan plenamente los objetivos planteados. Dicha técnica de optimización está basada en los algoritmos genéticos como herramienta de búsqueda, junto a un subprograma basado en técnicas de programación matemática para el cálculo de resultados. Un número reducido de resultados son finalmente escogidos y utilizados para modificar la simulación existente fijando la redistribución de los flujos del proceso. Los resultados de la simulación del proceso determinan en último caso la viabilidad técnica de cada reconfiguración planteada. En el proceso de optimización, los objetivos están definidos en una función objetivo dentro de la técnica de optimización. Dicha función rige la búsqueda de resultados. La función objetivo puede ser individual o una combinación de objetivos. En el presente caso, la función persigue una minimización del consumo de agua y una minimización de la pérdida de materia prima. La optimización se realiza bajo restricciones para alcanzar este objetivo combinado en forma de una solución de compromiso. Producto de la aplicación de esta metodología se han obtenido resultados interesantes que significan una mejora del cierre de circuitos y un ahorro de materia prima, sin comprometer al mismo tiempo la operabilidad del proceso producto ni la calidad del papel.

O processo de desenvolvimento do produto e o planejamento do suporte ao cliente

As empresas estão cada vez mais buscando atingir uma posição de liderança e ser um referencial perante os consumidores no pós-venda. Para isso é necessário que todas as ações necessárias para elaborar um Plano de Suporte ao Cliente ocorram desde o início dos projetos de desenvolvimento de novos produtos. Neste trabalho estudou-se e desenvolveu-se a metodologia do CSP (Customer Support Process), que incorporada a cada fase do PDP (Product Delivery Process), estabelece os requesitos e necessidades da área do Suporte ao Cliente no desenvolvimento de um novo produto. É sabido que se o Suporte ao Cliente não for considerado, o novo produto terá uma baixa aceitação por parte do cliente e consequentemente um pobre desempenho de mercado. Como parte da justificativa do desenvolvimento deste trabalho, verificou-se quais os principais problemas enfrentados atualmente. Problemas estes decorrentes da não aplicação de uma metodologia para planejamento das atividades necessárias para oferecer um bom Suporte ao Cliente no momento do lançamento de novos produtos. Conhecendo as deficiências e problemas atualmente enfrentados pela área de Suporte ao Cliente, foi possível desenvolver e adaptar o Processo de Suporte ao Cliente, às necessidades do departamento e sua estrutura organizacional Com a implantação completa deste método, pretende-se minimizar problemas enfrentados no dia a dia do Suporte ao Cliente, principalmente os relacionados a disponibilidade de informações técnicas atualizadas, treinamento, peças de reposição e ferramentas especiais para a rede de concessionários. Como finalização do trabalho é traçado um comparativo entre o resultado previsto do novo método versus o resultado atual obtido, onde não se aplicava nenhum método formal para o Planejamento do Suporte ao Cliente no desenvolvimento do produto.

Volatilidade dos retornos e governança: um estudo de eventos da crise do subprime

The financial crisis that occurred between the years 2007 and 2008, known as the subprime crisis, has highlighted the governance of companies in Brazil and worldwide. To monitor the financial risk, quantitative tools of risk management were created in the 1990s, after several financial disasters. The market turmoil has also led companies to invest in the development and use of information, which are applied as tools to support process control and decision making. Numerous empirical studies on informational efficiency of the market have been made inside and outside Brazil, revealing whether the prices reflect the information available instantly. The creation of different levels of corporate governance on BOVESPA, in 2000, made the firms had greater impairment in relation to its shareholders with greater transparency in their information. The purpose of this study is to analyze how the subprime financial crisis has affected, between January 2007 and December 2009, the volatility of stock returns in the BM&BOVESPA of companies with greater liquidity at different levels of corporate governance. From studies of time series and through the studies of events, econometric tests were performed by the EVIEWS, and through the results obtained it became evident that the adoption of good practices of corporate governance affect the volatility of returns of companies