Stability of the Inventory-Backorder Process in the (R; S) Inventory/Production Model

2000 Mathematics Subject Classification: 60G52, 90B30.

Horizontal Agreements and R&D Complementarities: Merger versus RJV

We study the decision of two rms within an oligopoly concerning whether to enter into a horizontal agreement to exploit complementarities between their R&D activities and, if so, whether to merge or form a research joint venture (RJV). In contrast to horizontal merger, there is a probability that an RJV contract will fail to enforce R&D sharing. We nd that a horizontal agreement always arises. The insiders' merger/RJV choice involves a trade-o : While merger o ers certainty that R&D complementarities will be exploited, it leads to a pro t-reducing reaction by outsiders on the product market, where competition is Cournot. Greater brand similarity and contract enforceability (\quality") both favour RJV, while greater R&D complementarity favours merger. Interestingly, the insiders may choose to merge even when RJV contracts are always enforceable, and they may opt to form an RJV even when the likelihood of enforceability is negligible.

"Lyhörd för vad mamman vill" : En kvalitativ studie om personalens upplevelser av att stötta mammor och barn i övergången från sondmatning till amning på en neonatalavdelning

Att stötta mamma och barn i övergången från sondmatning till att barnet kan nutriera sig helt genom amning eller flaskmatning är en omfattande och viktig del i omvårdnaden på en neonatalavdelning. Tidigare forskning av personalens upplevelser av denna process är begränsad. Forskning har mestadels fokuserat på någon eller några aspekter av mammors upplevelser av amning/flaskmatning på en neonatalavdelning.Syftet med denna studie var att undersöka personalens syn på amning och flaskmatning, samt beskriva hur de upplevde att de kunde stötta mamma och barn i processen att gå från sondmatning till amning samt hinder och underlättande aspekter. Studiens ansats var kvalitativ där tolv intervjuer genomfördes. Vid intervjuerna användes en intervjuguide som skapats av författarna och handledaren.Resultatet av studien visade att personalen hade en positiv syn på amning. Flaskmatning ansågs vara ett bra andrahands alternativ men inte något som borde introduceras först. Då det gällde stöttning av mamma och barn upplevdes tidig närhet vara viktigt men även att från personalens sida stötta mammans tillit till sin egen förmåga för att underlätta amningen. Informanterna betonade vikten av en individanpassad vård både för mammor och barn. Informanterna upplevde även att viktfixeringen på avdelningen var frustrerande för både mammorna och dem själva. Aspekter som upplevdes underlätta amningsarbetet var tidigare erfarenhet hos både personal och mammor.

Analys av förvridning vid hålning av rör : Analysis of metal torsion in rotary piercing

Hålningsprocessen är det inledande bearbetningssteget vid varmvalsning av sömlösa rör. Det är en tvärvalsningsprocess i vilken ett cylindriskt ämne valsas mellan två dubbelkoniska val¬sar över en plugg. Valsarna är snedställda med en viss mat¬ningsvinkel, vilken ger upphov till en axiell drivkraft genom ver¬ket. Hela denna pro¬cess är roterande. Detta i kombination med bl.a. de koniska valsarna leder till en förvrid¬ning av röret, dvs. en tänkt rak linje på det ingå¬ende äm¬net övergår till en spiral efter genomförd valsning. Med föreliggande uppgift är målet att studera förvridningen genom teoretisk och experimen¬tell analys. Syftet med detta är dels att få fördjupad kunskap inom området och dels att ut¬veckla en modell för pre¬diktering av förvridningen.Det experimentella arbetet är utfört på ett stål av typ Ovako 280 (SS2142). Denna mjuka stål¬sort valdes i syfte att undvika värmebehandling innan provberedning. För att visuali¬sera för¬vridningen fräs¬tes ett rakt spår längs det ingående äm¬net och hål borrades mot symmetrilinjen. De praktiska undersökningarna utfördes direkt i den löpande produktionen. Genomförda beräkningar uppvisar en längsgående förvridningsvinkel som stämmer väl över¬ens med uppmätt värde. Detta är dock under antagandet att den tangentiella hastighetskoeffi¬cienten varierar linjärt utmed deformationszonen. För en mer utvecklad modell krävs en nog¬grannare analys av kontakten mellan vals/ämne eller en grundligt genomförd uppmätning av ämnets vinkelhastighet.

Setting the preheating and steady-state operation of electronic ballasts, considering electrodes of hot-cathode fluorescent lamps

This paper presents a new methodology for the adjustment of the preheating process and steady-state operation of electronic ballasts intended for hot-cathode fluorescent lamps. The classical series-resonant parallel-loaded half-bridge inverter is the power stage analyzed in this paper. In addition, the preheating process is based on the imposition of a constant rms current through the electrodes, in order to provide a proper value of the R-h/R-c ratio before the lamp start. According to the proposed methodology, it is possible to set suitable operating points for, the electronic ballast, considering optimal conditions for the lamps electrodes. Therefore, the proposed methodology for setting the preheating and steady-state operation is a complete platform to the design of electronic ballasts for hot-cathode fluorescent lamps.

Produção de biomassa por Rubrivivax gelatinosus em efluente de abatedouro avícola utilizando métodos industriais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of pH on the phototransformation process of PhotogemA (R)

PhotogemA (R) is a hematoporphyrin derivative that has been used as a photosensitizer in experimental and clinical Photodynamic Therapy (PDT) in Brazil. Photosensitizers are degraded under illumination. This process, usually called photobleaching, can be monitored by decreasing in fluorescence intensities and includes the following photoprocesses: photodegradation, phototransformation, and photorelocalization. Photobleaching of hematoporphyrin-type sensitizers during illumination in aqueous solution is related not only to photodegradation but is also followed by the formation of photoproducts with a new fluorescence band at around 640-650 nm and with increased light absorption in the red spectral region at 640 nm. In this study, the influence of pH on the phototransformation process was investigated. PhotogemA (R) solutions, 40 mu g/ml, were irradiated at 514 nm with intensity of 100 mW/cm(2) for 20 min with different pH environments. The controls were performed with the samples in the absence of light. The PhotogemA (R) photodegradation is dependent on the pH. The behavior of photodegradation and photoproducts formation (monitored at 640 nm) is distinct and depends on the photosensitizer concentration. The processes of degradation and photoproducts formation were monitored with Photogemin the concentration of 40 mu g/mL since that demonstrated the best visualization of both processes. While below pH 5 the photodegradation occurred, there was no detectable presence of photoproducts. The increase of pH led to increase of photoproducts formation rate with photodegradation reaching the highest value at pH 10. The increase of photoproducts formation and instability of PhotogemA (R) from pH 6 to pH 10 are in agreement with the desired properties of an ideal photosensitizer since there are significant differences in pH between normal (7.0 < pH < 8.6) and tumor (5.8 < pH < 7.9) tissues. It is important to know the effect of pH in the process of phototransformation (degradation and photoproduct formation) of the molecule since low pH values promotes increase in the proportion of aggregates species in solution and high pH values promotes increase in the proportion of monomeric species. There must be an ideal pH interval which favors the phototransformation process that is correlated with the singlet oxygen formation responsible by the photodynamic effect. These differences in pH between normal and tumor cells can explain the presence of photosensitizers in target tumor cells, making PDT a selective therapy.

Influence of enamel matrix derivative (Emdogain((R))) and sodium fluoride on the healing process in delayed tooth replantation: histologic and histometric analysis in rats

Although it has already been shown that enamel matrix derivative (Emdogain((R))) promotes periodontal regeneration in the treatment of intrabony periodontal defects, there is little information concerning its regenerative capacity in cases of delayed tooth replantation. To evaluate the alterations in the periodontal healing of replanted teeth after use of Emdogain((R)), the central incisors of 24 Wistar rats (Rattus norvegicus albinus) were extracted and left on the bench for 6 h. Thereafter, the dental papilla and the enamel organ of each tooth were sectioned for pulp removal by a retrograde way and the canal was irrigated with 1% sodium hypochlorite. The teeth were assigned to two groups:in group I, root surface was treated with 1% sodium hypochlorite for 10 min (changing the solution every 5 min), rinsed with saline for 10 min and immersed in 2% acidulated-phosphate sodium fluoride for 10 min; in group II, root surfaces were treated in the same way as described above, except for the application of Emdogain((R)) instead of sodium fluoride. The teeth were filled with calcium hydroxide (in group II right before Emdogain((R)) was applied) and replanted. All animals received antibiotic therapy. The rats were killed by anesthetic overdose 10 and 60 days after replantation. The pieces containing the replanted teeth were removed, fixated, decalcified and paraffin-embedded. Semi-serial 6-mu m-thick sections were obtained and stained with hematoxylin and eosin for histologic and histometric analyses. The use of 2% acidulated-phosphate sodium fluoride provided more areas of replacement resorption. The use of Emdogain((R)) resulted in more areas of ankylosis and was therefore not able to avoid dentoalveolar ankylosis. It may be concluded that neither 2% acidulated-phosphate sodium fluoride nor Emdogain((R)) were able to prevent root resorption in delayed tooth replantation in rats.

Improvement of the chemical resistance of zirconium fluoride glasses coated with a Tiron (R) modified tin oxide layer prepared by the sol-gel process

In order to improve the chemical resistance of zirconium fluoride glass a protective transparent SnO2 layer was deposited by the solgel dip-coating process in the presence of Tiron (R) as particle surface modifier agent. After water immersion for different periods of time, both coated and non-coated fluoride glasses were analyzed by scanning electron microscopy, mass loss evaluation, infrared spectroscopy and X-ray photoelectron spectroscopy. In contrast to the effects occurring for non-coated glass, where the surface undergoes a rapid selective dissolution of the most soluble species, the results for the SnO2-coated glass showed that the filling of the film nanopores by dissolved glass material results in a hermetic barrier protecting the glass surface. The selective glass dissolution was confirmed by liquid chromatography measurements of the etching solution after each exposure time. (c) 2006 Elsevier B.V. All rights reserved.

Book Review of Archaeology as a Process: Processualism and Its Progeny by Michael J. O'Brien, R. Lee Lyman, and Michael Brian Schiffer

The field of archaeology incorporates a confusing assortment of ideas and approaches to the record. With studies ranging widely in ideology and goals, from strict descriptive materialism to sociological interpretation, language used to communicate key concepts (not to mention which concepts are key) also varies widely, resulting in low levels of mutual interest and intelligibility across the discipline. Archaeologists commonly ignore the majority of available literature as a result, further widening intellectual chasms.

Business process reengineering e project management: La creazione del sistema di gestione dei progetti in ICS Italia - Aspiag Service S.R.L.

L’obiettivo dell’elaborato è mostrare come, partendo da una robusta base teorica nelle discipline del Project Management e del Business Process Reengineering, sia possibile ridefinire un sistema di gestione dei progetti (a livello singolo e di aggregato) e sviluppare, presso il personale coinvolto, le competenze necessarie a sostenere autonomamente ed a migliorare il sistema così creato. La reingegnerizzazione della progettazione nell’azienda in esame si è sviluppata nell’arco di un quadriennio: nel 2010 è stata concretizzata la prima release dei processi di gestione del progetto singolo e dell’aggregato, nel 2011 è maturata la seconda release, mentre nel biennio 2012-2013 si sono “congelati” i risultati ottenuti e si è sviluppata l’autonomia dei Project Manager interni e del Project Management Office. Dall’analisi è emersa l’importanza di un solido approccio metodologico negli interventi di innovazione organizzativa.

From concept to commercialization; a study of the R & D budget allocation process.

"Conducted by three Sloan fellows, members of the 1960-61 Stanford-Sloan program."