Methods for estimating peak discharge and flood boundaries of streams in Utah /

624-B

Polarity chron boundaries and interval sedimentation rates of ODP Leg 162 sites

Magnetic polarity stratigraphies for Sites 980-984 are based on shipboard measurements from the pass-through magnetometer after alternating field (AF) demagnetization at a peak field of 25 mT and shore-based stepwise AF demagnetization of discrete samples. The characteristic magnetization component was determined after AF demagnetization removed the steep downward drill-string-related magnetic overprint. Peak AF fields in the 20-30 mT range were required to resolve the component, carried by magnetite, that was used to produce unambiguous Pliocene-Pleistocene magnetic stratigraphies at all five sites. At Sites 980 and 983, magnetic stratigraphies were resolved to the base of the recovered advanced hydraulic piston corer (APC) section, which lies in the Matuyama Chron (1r.2r) and Olduvai Subchron (2n), respectively. At Sites 981 and 982, magnetization intensities decrease sharply in the normal polarity zone corresponding to the Gauss Chron (2An), and magnetic stratigraphies below this level could not be resolved. At Site 984, the resolution of magnetic stratigraphy was curtailed at ~250 meters below seafloor (Olduvai Subchron) by core deformation at the base of the APC section and in the underlying extended core barrel section. As the magnetic stratigraphies at all four sites are unequivocal, polarity chron interpretations can be made without aid from the biostratigraphy. Mean sedimentation rates within polarity chrons have been calculated and Pliocene-Pleistocene biomagnetostratigraphic correlations tested.

Thermal counterflow in a periodic channel with solid boundaries

We perform numerical simulations of finite temperature quantum turbulence produced through thermal counterflow in superfluid 4He, using the vortex filament model. We investigate the effects of solid boundaries along one of the Cartesian directions, assuming a laminar normal fluid with a Poiseuille velocity profile, whilst varying the temperature and the normal fluid velocity. We analyze the distribution of the quantized vortices, reconnection rates, and quantized vorticity production as a function of the wall-normal direction. We find that the quantized vortex lines tend to concentrate close to the solid boundaries with their position depending only on temperature and not on the counterflow velocity. We offer an explanation of this phenomenon by considering the balance of two competing effects, namely the rate of turbulent diffusion of an isotropic tangle near the boundaries and the rate of quantized vorticity production at the center. Moreover, this yields the observed scaling of the position of the peak vortex line density with the mutual friction parameter. Finally, we provide evidence that upon the transition from laminar to turbulent normal fluid flow, there is a dramatic increase in the homogeneity of the tangle, which could be used as an indirect measure of the transition to turbulence in the normal fluid component for experiments.

Crossing boundaries: Implications of advances in basic sciences for the management of addiction.

This set of papers in this issue of "Addictive Behaviors" was presented at the 2004 'Addictions' conference, which, for the first time, was held in the Southern Hemisphere, on the Sunshine Coast of Queensland, Australia. The theme of the conference, Crossing Boundaries: Implications of Advances in Basic Sciences for the Management of Addiction, speaks for itself. The papers derive from a wide range of empirical paradigms and cover issues with relevance to the development of addiction, to the maintenance of problematic use, and to assessment, treatment, and relapse. Research from Europe and the United States is represented, as well as work from Australia. An international perspective is strongly emphasized from the initial paper by Obot, Poznyak, and Moneiro, (see record 2004-19599-015) which describes the WHO Report on the Neuroscience of Psychoactive Substance Use and Dependence, and summarises some of the report's implications for policy and practice. Hall, Carter, and Morley (see record 2004-19599-014) close the issue with a paper on the wide-ranging ethical implications of advances in neuroscience research, including issues arising from the identification of high risk for addiction, the potential for coercive pharmacotherapy, use of medications to enhance function, and risks to privacy.

Peak-to-average power ratio of IEEE 802.11a PHY layer signals

In this chapter we propose clipping with amplitude and phase corrections to reduce the peak-to-average power ratio (PAR) of orthogonal frequency division multiplexed (OFDM) signals in high-speed wireless local area networks defined in IEEE 802.11a physical layer. The proposed techniques can be implemented with a small modification at the transmitter and the receiver remains standard compliant. PAR reduction as much as 4dB can be achieved by selecting a suitable clipping ratio and a correction factor depending on the constellation used. Out of band noise (OBN) is also reduced.

Interleaved PC-OFDM to reduce peak-to-average power ratio

Parallel combinatory orthogonal frequency division multiplexing (PC-OFDM yields lower maximum peak-to-average power ratio (PAR), high bandwidth efficiency and lower bit error rate (BER) on Gaussian channels compared to OFDM systems. However, PC-OFDM does not improve the statistics of PAR significantly. In this chapter, the use of a set of fixed permutations to improve the statistics of the PAR of a PC-OFDM signal is presented. For this technique, interleavers are used to produce K-1 permuted sequences from the same information sequence. The sequence with the lowest PAR, among K sequences is chosen for the transmission. The PAR of a PC-OFDM signal can be further reduced by 3-4 dB by this technique. Mathematical expressions for the complementary cumulative density function (CCDF)of PAR of PC-OFDM signal and interleaved PC-OFDM signal are also presented.

Peak power demand reduction under moving block signalling using an expert system

The concept of moving block signallings (MBS) has been adopted in a few mass transit railway systems. When a dense queue of trains begins to move from a complete stop, the trains can re-start in very close succession under MBS. The feeding substations nearby are likely to be overloaded and the service will inevitably be disturbed unless substations of higher power rating are used. By introducing starting time delays among the trains or limiting the trains’ acceleration rate to a certain extent, the peak energy demand can be contained. However, delay is introduced and quality of service is degraded. An expert system approach is presented to provide a supervisory tool for the operators. As the knowledge base is vital for the quality of decisions to be made, the study focuses on its formulation with a balance between delay and peak power demand.

Government : charity boundaries

The Preamble1 was the initial legislative statement of matters construed by government to constitute charitable purposes in a common law context. It provided an outline of what was to become the core agenda for government’s relationship with charity. The resulting implied partnership, as viewed by government, endured for four centuries and in many different cultural contexts across the common law world. During that period, judicial mediation on the balance to be struck between government interest in acquiring value for granting tax exempt privileges and the right of individuals to freely dispose of property in accordance with their particular altruistic wishes steadily broadened the range of purposes deemed to be charitable, the vagaries of donor choice often prevailing over government interest in acquiring value for tax exemption.

A novel load transfer scheme for peak load management in rural areas

This paper proposes a novel peak load management scheme for rural areas. The scheme transfers certain customers onto local nonembedded generators during peak load periods to alleviate network under voltage problems. This paper develops and presents this system by way of a case study in Central Queensland, Australia. A methodology is presented for determining the best location for the nonembedded generators as well as the number of generators required to alleviate network problems. A control algorithm to transfer and reconnect customers is developed to ensure that the network voltage profile remains within specification under all plausible load conditions. Finally, simulations are presented to show the performance of the system over a typical maximum daily load profile with large stochastic load variations.