E-Portfolios als Instrument zur Professionalisierung in der Lehrer- und Lehrerinnenausbildung

E-Portfolios haben in den letzten Jahren große Aufmerksamkeit in der aktuellen pädagogischen Fachdiskussion erfahren und können als einer der wesentlichen Trends bezeichnet werden. Mit der Bologna-konformen Überarbeitung der Lehrpläne an Hochschulen und Universitäten und der Ausrichtung de Studien an Kompetenzen (Outcome- statt Input-Orientierung) bzw. Lernerzentrierung haben immer mehr E-Portfolios den Eingang in die Curricula verschiendenster Aus- und Weiterbildungsstudien gefunden. Dieses Buch beschreibt die Arbeit mit E-Portfolios in der schulpraktischen Hochschulausbildung von Lehrerinnen und Lehrern mit dem Ziel, motivationale und technologische Faktoren der Nutzung von E-Portfolios durch Studierende zu bewerten und E-Portfolios sowohl als Werkzeug als auch als Methode in der Pädagogen- und Pädagoginnenbildung weiterzuentwickeln.

Constructing a user experience user experience-based mobile learning environment

Mobile learning, in the past defined as learning with mobile devices, now refers to any type of learning-on-the-go or learning that takes advantage of mobile technologies. This new definition shifted its focus from the mobility of technology to the mobility of the learner (O'Malley and Stanton 2002; Sharples, Arnedillo-Sanchez et al. 2009). Placing emphasis on the mobile learner’s perspective requires studying “how the mobility of learners augmented by personal and public technology can contribute to the process of gaining new knowledge, skills, and experience” (Sharples, Arnedillo-Sanchez et al. 2009). The demands of an increasingly knowledge based society and the advances in mobile phone technology are combining to spur the growth of mobile learning. Around the world, mobile learning is predicted to be the future of online learning, and is slowly entering the mainstream education. However, for mobile learning to attain its full potential, it is essential to develop more advanced technologies that are tailored to the needs of this new learning environment. A research field that allows putting the development of such technologies onto a solid basis is user experience design, which addresses how to improve usability and therefore user acceptance of a system. Although there is no consensus definition of user experience, simply stated it focuses on how a person feels about using a product, system or service. It is generally agreed that user experience adds subjective attributes and social aspects to a space that has previously concerned itself mainly with ease-of-use. In addition, it can include users’ perceptions of usability and system efficiency. Recent advances in mobile and ubiquitous computing technologies further underline the importance of human-computer interaction and user experience (feelings, motivations, and values) with a system. Today, there are plenty of reports on the limitations of mobile technologies for learning (e.g., small screen size, slow connection), but there is a lack of research on user experience with mobile technologies. This dissertation will fill in this gap by a new approach in building a user experience-based mobile learning environment. The optimized user experience we suggest integrates three priorities, namely a) content, by improving the quality of delivered learning materials, b) the teaching and learning process, by enabling live and synchronous learning, and c) the learners themselves, by enabling a timely detection of their emotional state during mobile learning. In detail, the contributions of this thesis are as follows: • A video codec optimized for screencast videos which achieves an unprecedented compression rate while maintaining a very high video quality, and a novel UI layout for video lectures, which together enable truly mobile access to live lectures. • A new approach in HTTP-based multimedia delivery that exploits the characteristics of live lectures in a mobile context and enables a significantly improved user experience for mobile live lectures. • A non-invasive affective learning model based on multi-modal emotion detection with very high recognition rates, which enables real-time emotion detection and subsequent adaption of the learning environment on mobile devices. The technology resulting from the research presented in this thesis is in daily use at the School of Continuing Education of Shanghai Jiaotong University (SOCE), a blended-learning institution with 35.000 students.

The Future of Ubiquitous Learning

This book explores emerging pedagogical perspectives based on the design of new learning spaces supported by digital technologies and brings together some of the best research in this field. The book is divided into three themes: foundations of emerging pedagogies, learning designs for emerging pedagogies and, adaptive and personalized learning. The chapters provide up-to-date information about new pedagogical proposals, and examples for acquiring the requisite skills to both design and support learning opportunities that improve the potential of available technologies.

Informelles Lernen Studierender mit Social Software unterstützen

E-Learning-Aktivitäten von Hochschulen haben häufig eine einseitige Ausrichtung auf die Unterstützung von Lehrveranstaltungen durch Technologien, insbesondere Lernmanagementsysteme. Dabei geraten die Studierenden als Zielgruppe nur mittelbar in den Blick. Diese Beobachtung nehmen die Autorinnen und Autoren des Bandes zum Anlass, das Lern-Erleben und die unterschiedlichen Phasen des Studiums aus Perspektive der Studierenden zu betrachten. Untersucht wird zudem, welche Unterstützungsangebote Hochschulen in welchen Phasen idealerweise bereitstellen. Die Autorinnen und Autoren formulieren detailliert, wie Hochschulen das studentische Lernen mit Hilfe von Social Software unterstützen können. Diese Empfehlungen basieren auf den Ergebnissen empirischer Untersuchungen sowie auf Fallstudien nationaler und internationaler Beispiele guter Praxis, die ausführlich präsentiert werden. Mit diesem Band möchten die Autorinnen und Autoren denjenigen, die in Bildungseinrichtungen des tertiären Sektors (aber auch in anderen Sektoren) tätig sind, konkrete Anregungen liefern, Unterstützungsangebote für das informelle Lernen von Studierenden mit Social Software stärker in den Blick zu nehmen und geeignete Angebote zu entwickeln. Die Publikation basiert auf Ergebnissen des Projekts „Learner Communities of Practice“, das zwischen 2009 und 2012 als Verbundprojekt sächsischer Hochschulen mit Förderung durch das SMWK unter Leitung des Medienzentrums der TU Dresden bearbeitet wurde.

Biomechanical force displacement analysis of strength of fixation of tracker holding devices to bone in computer aided joint replacement

Computer aided joint replacement surgery has become very popular during recent years and is being done in increasing numbers all over the world. The accuracy of the system depends to a major extent, on accurate registration and immobility of the tracker attachment devices to the bone. This study was designed to asses the forces needed to displace the tracker attachment devices in the bone simulators. Bone simulators were used to maintain the uniformity of the bone structure during the study. The fixation devices tested were 3mm diameter self drilling, self tapping threaded pin, 4mm diameter self tapping cortical threaded pin, 5mm diameter self tapping cancellous threaded pin and a triplanar fixation device ‘ortholock’ used with three 3mm pins. All the devices were tested for pull out, translational and rotational forces in unicortical and bicortical fixation modes. Also tested was the normal bang strength and forces generated by leaning on the devices. The forces required to produce translation increased with the increasing diameter of the pins. These were 105N, 185N, and 225N for the unicortical fixations and 130N, 200N, 225N for the bicortical fixations for 3mm, 4mm and 5mm diameter pins respectively. The forces required to pull out the pins were 1475N, 1650N, 2050N for the unicortical, 1020N, 3044N and 3042N for the bicortical fixated 3mm, 4mm and 5mm diameter pins. The ortholock translational and pull out strength was tested to 900N and 920N respectively and still it did not fail. Rotatory forces required to displace the tracker on pins was to the magnitude of 30N before failure. The ortholock device had rotational forces applied up to 135N and still did not fail. The manual leaning forces and the sudden bang forces generated were of the magnitude of 210N and 150N respectively. The strength of the fixation pins increases with increasing diameter from three to five mm for the translational forces. There is no significant difference in pull out forces of four mm and five mm diameter pins though it is more that the three mm diameter pins. This is because of the failure of material at that stage rather than the fixation device. The rotatory forces required to displace the tracker are very small and much less that that can be produced by the surgeon or assistants in single pins. Although the ortholock device was tested to 135N in rotation without failing, one has to be very careful not to put any forces during the operation on the tracker devices to ensure the accuracy of the procedure.

Matching cognitive styles to computer-based instruction : an approach for enhanced learning in electrical engineering

An approach aimed at enhancing learning by matching individual students' preferred cognitive styles to computer-based instructional (CBI) material is presented. This approach was used in teaching some components of a third-year unit in an electrical engineering course at the Queensland University of Technology. Cognitive style characteristics of perceiving and processing information were considered. The bimodal nature of cognitive styles (analytic/imager, analytic/verbalizer, wholist/imager and wholist/verbalizer) was examined in order to assess the full ramification of cognitive styles on learning. In a quasi-experimental format, students' cognitive styles were analysed by cognitive style analysis (CSA) software. On the basis of the CSA results the system defaulted students to either matched or mismatched CBI material. The consistently better performance by the matched group suggests potential for further investigations where the limitations cited in this paper are eliminated. Analysing the differences between cognitive styles on individual test tasks also suggests that certain test tasks may better suit certain cognitive styles.

Personalizing the design of computer-based instruction to enhance learning

This paper reports two studies designed to investigate the effect on learning outcomes of matching individuals' preferred cognitive styles to computer-based instructional (CBI) material. Study 1 considered the styles individually as Verbalizer, Imager, Wholist and Analytic. Study 2 considered the bi-dimensional nature of cognitive styles in order to assess the full ramification of cognitive styles on learning: Analytic/Imager, Analytic/ Verbalizer, Wholist/Imager and the Wholist/Verbalizer. The mix of images and text, the nature of the text material, use of advance organizers and proximity of information to facilitate meaningful connections between various pieces of information were some of the considerations in the design of the CBI material. In a quasi-experimental format, students' cognitive styles were analysed by Cognitive Style Analysis (CSA) software. On the basis of the CSA result, the system defaulted students to either matched or mismatched CBI material by alternating between the two formats. The instructional material had a learning and a test phase. Learning outcome was tested on recall, labelling, explanation and problem-solving tasks. Comparison of the matched and mismatched instruction did not indicate significant difference between the groups, but the consistently better performance by the matched group suggests potential for further investigations where the limitations cited in this paper are eliminated. The result did indicate a significant difference between the four cognitive styles with the Wholist/Verbalizer group performing better then all other cognitive styles. Analysing the difference between cognitive styles on individual test tasks indicated significant difference on recall, labelling and explanation, suggesting that certain test tasks may suit certain cognitive styles.

An investigation of the effect of individual cognitive preferences on learning through computer-based instruction

This paper reports a study investigating the effect of individual cognitive styles on learning through computer-based instruction. The study adopted a quasi-experimental design involving four groups which were presented with instructional material that either matched or mismatched with their preferred cognitive styles. Cognitive styles were measured by cognitive style assessment software (Riding, 1991). The instructional material was designed to cater for the four cognitive styles identified by Riding. Students' learning outcomes were measured by the time taken to perform test tasks and the number of marks scored. The results indicate no significant difference between the matched and mismatched groups on both time taken and scores on test tasks. However, there was significant difference between the four cognitive styles on test score. The Wholist/Verbaliser group performed better then all other groups. There was no significant difference between the other groups. An analysis of the performance on test task by each cognitive style showed significant difference between the groups on recall, labelling and explanation. Difference between the cognitive style groups did not reach significance level for problem-solving tasks. The findings of the study indicate a potential for cognitive style to influence learning outcomes measured by performance on test tasks.

Computer assisted instruction and individual cognitive style preferences in learning : does it matter?

This paper reports the findings of a pilot study aimed at improving learning outcomes from Computer Assisted Instruction (CAI). The study involved second year nursing students at the Queensland University of Technology. Students were assessed for their preferred cognitive style and presented with either matched or mismatched instructional material. The instructional material was developed in accordance with four cognitive styles (Riding & Cheema, 1991). The findings indicate groups that received instructional material which matched their preferred cognitive style, possibly, performed better than groups that received mismatched instructional material. The matched group was particularly better in the explanation and problem solving tasks.