Estudo comparativo da massa específica aparente e retratibilidade da madeira de pau-brasil (Caesalpinia echinata LAM.) nativa e de reflorestamento

Entre as propriedades físicas da madeira, a massa específica aparente e a retratibilidade são características importantes na avaliação da qualidade da madeira para ampla gama de uso. A massa específica aparente, ou densidade aparente, está relacionada a uma série de outras características, principalmente àquelas relacionadas às propriedades mecânicas e anatômicas da madeira. Do mesmo modo, a retratibilidade também é importante característica, pois avalia a estabilidade dimensional das madeiras, sendo de grande importância para aplicações em que a madeira não deve apresentar contrações excessivas durante sua utilização. Com base nisso, este estudo teve como objetivo comparar a massa específica aparente e a retratibilidade da madeira de pau-brasil, proveniente de áreas naturais e de reflorestamentos com 10, 15, 20, 26 e 30 anos. Tais avaliações foram realizadas segundo a metodologia preconizada pelo Método Brasileiro 26/1940 da Associação Brasileira de Normas Técnicas. Os resultados indicaram que houve variação na massa específica aparente nas diferentes idades, com os maiores valores para a madeira de 30 anos de idade, que foram próximos aos encontrados para amostras de madeira nativa. A retratibilidade volumétrica total também variou em função da idade, não apresentando grande diferença em relação à madeira proveniente de áreas naturais.

Redução da influência da massa específica na determinação do teor de umidade de sementes de trigo

A medição da capacitância e da condutância de um capacitor contendo amostras de trigo permite a determinação de duas de suas propriedades dielétricas: a permissividade relativa (épsilon') e o fator de perda dielétrica (épsilon"). A utilização dessas propriedades, medidas simultaneamente em duas freqüências de oscilação do campo elétrico, permite reduzir ou eliminar o efeito da massa específica aparente na determinação do teor de umidade do trigo. Tal procedimento torna possível o monitoramento contínuo e em tempo real, sem a necessidade de retirar amostras, do teor de umidade de uma coluna de grãos em movimento, situação em que ocorrem as maiores variações na massa específica do produto. O objetivo deste trabalho consistiu na obtenção de equações que permitam reduzir ou eliminar o efeito da massa específica na determinação em linha do teor de umidade do trigo. Foram utilizadas amostras das variedades Hussar, Mercia e Hereward com teor de umidade entre 11% e 22% b.u. e massa específica no intervalo 666 kg m-3 <= ro <= 873 kg m-3. A equação que apresentou melhor desempenho permite calcular o teor de umidade do trigo com erros-padrão de calibração e de predição de 0,4 e 0,5 ponto percentual, respectivamente.

Análise da variação das propriedades físicas dos grãos de soja durante o processo de secagem

O presente trabalho foi realizado com o objetivo de se avaliar o efeito da secagem nas propriedades físicas dos grãos de soja, e analisar as diferentes metodologias de determinação da massa específica aparente e da massa específica real. Além disso, avaliaramse a contração volumétrica dos grãos de soja durante a secagem e, ajustes de diferentes modelos matemáticos aos valores experimentais das propriedades analisadas, em função do teor de água. Com base nos resultados obtidos, concluiu-se que a redução do teor de água provoca diminuição linear da porosidade na faixa entre 0,31 e 0,15 (b.s.) e aumento das massas específicas aparente e real. Além disso, os resultados obtidos para massa específica real e aparente, pelo método de determinação com base nos constituintes dos grãos de soja, apresentaram-se inferiores aos valores experimentais. Os modelos de BALA & WOODS [2] adaptado, RAHMAN, linear e exponencial são apropriados para descrição da contração volumétrica da massa de grãos de soja, enquanto o modelo de BALA & WOODS [2] adaptado é o mais apropriado para descrição da contração volumétrica unitária da soja.

Estudo da massa específica básica e da variação dimensional da madeira de três espécies de eucalipto para a indústria moveleira

The utilization of wood from reforested species by the furniture industry is a recent trend. Thus, the present study determined the specific gravity and shrinkage of wood of 18-year-old Eucalyptus grandis, Eucalyptus dunnii and Eucalyptus urophylla, for use as components in solid wood furniture making. The tests to evaluate the specific gravity and shrinkage of wood in the radial and axial variation of the eucalyptus trees were performed according to NBR 7190/96. The results of the analysis of wood from eucalypt species were subjected to the Homogeneity Test, ANOVA, Tukey and Pearson correlation and compared to the performance of sucupira wood (Bowdichia nitida) and cumaru wood (Dipteryx odorata), often used in the furniture industry. The following results were found: Eucalyptus grandis had a lower value of shrinkage, being more suitable for furniture components that require high dimensional stability, as well as parts of larger surface. The wood of this species showed a rate of dimensional variation compatible with the native species used in the furniture industry. The radial variation of the wood was also verified, and a high correlation between specific gravity and shrinkage was found. Longitudinally, the base of the trunk of the eucalyptus trees was shown to be the region of greatest dimensional stability.

Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial

VARELA, M. L. et al. Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial. Cerâmica, v.55, n.334 p.209-215. 2009.ISSN 0366-6913.Disponível em: . Acesso em: 06 out. 2010.

Influência do lodo de ETE na massa para fabricação de cerâmica vermelha

The WTP produce many kinds of residue on your treatment stages, but the sludge is the more problematic from the final disposition point view. The actual rate of residue production deriving from technological evolution and the crescent population needs prevents the subtle equilibrium generation between consumption and recycling/reuse, creating problems of pollution resulting from inappropriate management of residues. Thus, is necessary achieve a new equilibrium between the grow from raw materials and energy and the residue generation. This equilibrium should be achieved by technical and economic feasibility of environmental supported models through recycling and reuse. The red ceramic industry stand out in residue absorption question as raw material due their clay mass heterogeneity, constituted by clay minerals and non-clay minerals with wide mineralogical variation, allowing residue inclusion which act like plastic or non-plastic materials, contributing to retain heavy metals contained in residues in the vitreous mass formed during the burning of the ceramic bodies. This work propose the study of the influence of incorporation of 25 wt.% sludge from wastewater treatment plant, according preliminary results, in the mass to produce ceramic bodies. The raw materials was characterized through chemical composition analyses by XRF, mineralogical analyses by XRD, thermal analyses by TG and DTA, Atterberg limits and thermodilatometry. Subsequently was composed the mass with 75 wt.% of clay and 25 wt.% of dried wastewater sludge from UFRN WWTP. Samples with 6,0 x 2,0 x 0,5 cm was produced with unidirectional compacting under pressure of 20MPa and burned in temperatures between 950 and 1,200ºC. After fired, the ceramic bodies have been submitted to physical and mechanical analyses through the measure of firing shrinkage, water absorption, density, apparent porosity and flexural strength; crystallographic analyses through XRD and microstructure analyses by SEM. The technological properties obtained was satisfactory to production of roof tiles with 25 wt.% at 1,200 ºC, but the production of others products at lower temperatures was not feasible

Efeito da adição de carbonatos em formulação de massa para revestimento cerâmico utilizando matérias-primas do Piauí

Piauí state is a major producer of traditional red ceramic burning as bricks, tiles and ceramic tiles, with its main production center located in the city of Teresina. The state has large reserves of raw materials that can be used in the ceramic coating as clays, quartz, talc and carbonates. However, in the preparation of ceramic bodies using only a mixture of clays with different characteristics. The study aims to evaluate the effect of adding two types of carbonates in the ceramic semiporous mass coating produced in Piauí and then to verify the potential use of these carbonates as supplementary raw material product manufactured or the feasibility of obtaining a ceramic plate that meets the specifications for the porous coating. For this, were characterized the ceramic Piauí coating mass, a calcitic carbonate and a dolomitic, were made in the levels of 2, 4, 8, 16, and 32%. The masses were formed by pressing and burneds in two environments: a laboratory furnace (1080°C, 1120°C, 1140°C, and 1160°C) and an industrial furnace (1140°C). Then, following tests of linear shrinkage water absorption, apparent porosity, bulk density and flexural strength. Furthermore, the fired specimens were tested for their macrostructure and microstructure. The results showed the possibility of using the carbonate in ceramic mass flooring produced in Piauí, as added in small proportions improved dimensional stability and increased mechanical strength of ceramics pieces. It also proved itself possible to produce porous coating when added in higher levels

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Perdas endógenas e coeficientes de absorção aparente e real do magnésio em caprinos

Os objetivos deste trabalho foram determinar a absorção aparente, estimar as perdas endógenas fecais e a absorção real do Mg e determinar a ingestão ad libitum da água de beber e a concentração de Mg no soro sangüíneo de caprinos da raças Anglonubiana (AN) e Saanen (SN). Foram usados doze caprinos, seis de cada raça, com 19,8 kg PV médio. Dietas semipurificadas (baixo teor de Mg) à base de quirera de arroz, glúten de milho e celulose foram suplementadas com MgO, para se obterem os níveis de 0,05 (sem supplementação) 0,20 e 0,35% Mg (%MS). Os níveis de Mg influenciaram os coeficientes de absorção aparente de Mg e Ca, com valores médios de 57,8; 73,9; e 73,2% para Mg e 55,7; 39,6; e 49,5% para Ca, para dietas com níveis 0,05; 0,20; e 0,35% de Mg, respectivamente. Entretanto, para os coeficientes de absorção aparente de P, Na e K, não houve efeito de níveis de Mg na dieta. Os resultados de absorção real de Mg apresentaram interação de níveis de Mg e raças. A média para raça NA, no nível 0,05% Mg, foi de 61,0% e para os níveis 0,20 e 0,35% Mg, 77,2 e 73,2%, respectivamente. Entretanto, para a raça SN, as médias foram 73,3; 75,5; e 76,0%, para os mesmos níveis, sem diferenças. A digestibilidade de matéria seca, proteína bruta e extrato não-nitrogenado diminuiu com os níveis crescentes de Mg nas dietas. As excreções fecais (7,0; 20,8; e 34,4 mg/kg PV0,75.d) e urinárias (3,9; 30,8; e 44,6 mg/kg PV0,75.d) de Mg elevaram-se com o aumento dos níveis crescentes de Mg nas dietas. Houve, também, influência dos níveis de Mg dietético sobre as concentrações de Mg do soro sangüíneo (1,74; 2,23; e 2,80 mg/dL para níveis de 0,05; 0,20; e 0,35% de Mg, respectivamente).

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

Estudo de formulação de massa para aplicação em placas cerâmicas

The sector of civil construction is strongly related to the red ceramic industry. This sector uses clay as raw material for manufacturing of various products such as ceramic plates. In this study, two types of clay called clay 1 and clay 2 were collected on deposit in Ielmo Marinho city (RN) and then characterized by thermogravimetric analysis (TG/DTG), differential thermal analysis (DTA), X-ray diffraction (XRD), X-ray fluorescence (XRF), rational analysis and particle size distribution and dilatometric analyses. Ceramic plates were manufactured by uniaxial pressing and by extrusion. The plates obtained by pressing were produced from the four formulations called 1, 2, 3 and 4, which presented, respectively, the following proportions by mass: 66.5% clay 1 and 33.5% clay 2, 50% clay 1 and 50% clay 2, 33.5% clay 1 and 66.5% clay 2, 25% clay 1 and 75% clay 2. After firing at 850, 950 and 1050 °C with heating rate of 10 °C/min and soaking time of 30 minutes, the following technological properties were determined: linear firing shrinkage, water absorption, apparent porosity, apparent specific mass and tensile strength (3 points). The formulation containing 25% clay 1 produced plates with most satisfactory results of water absorption and mechanical resistance, because of that it was chosen for manufacturing plates by extrusion. A single firing cycle was established for these plates, which took place as follow: heating rate of 2 °C/min up to 600 ºC with soaking time of 60 minutes, followed by heating using the same rate up to 1050 ºC with soaking time of 30 minutes. After this cycle, the same technological properties investigated in the plates obtained by pressing were determined. The results indicate (according to NRB 13818/1997) that the plates obtained by pressing from the mixture containing 25 wt% clay 1, after firing at 1050 °C, reach the specifications for semi-porous coating (BIIb). On the other hand, the plates obtained by extrusion were classified as semi-stoneware (group AIIa)

Variação da massa específica da madeira de Eucalyptus grandis aos 8 anos de idade em função de diferentes níveis de produtividade

It were analyzed Eucalyptus grandis trees of 8 years old in the forest group of Duraflora S/A, with different annual increments based on volume, to the related studies of specific gravity values based on productivity indexes. The methodology used in analysis of specific gravity was the gamma-ray attenuation technique of Americium-241. The Eucalyptus grandis showed a specific gravity decreasing with the increasing of parcel productivity. For a gain of 3,5 m3 in productivity there was a decreasing of 1% in specific gravity. Nevertheless, it was not observed correlation between specific gravity and basal area in a same parcel. The present work stands out too, some of the difficulties found with relation to wood specific gravity determinations and emphasize the importance of take samples in the form of full rounded plates in three or four relative positions in the tree.

Lo aparente como real : Un análisis del sujeto 'comunista' en la creación y consolidación del servicio de inteligencia de la policía de la Provincia de Buenos Aires

Fil: Marengo, María Eugenia. Universidad Nacional de La Plata. Facultad de Humanidades y Ciencias de la Educación; Argentina.

Lo aparente como real. Un análisis del sujeto "comunista", en la creación y consolidación del servicio de inteligencia de la policía de la Provincia de Buenos Aires

La siguiente investigación tuvo por objetivo analizar las representaciones de las diversas dependencias de inteligencia de la Policía de la Provincia de Buenos Aires, en relación a la construcción del actor político calificado como "comunista", entre el período 1930-1962. El enfoque de análisis recorrió las prácticas que caracterizaron el funcionamiento de la labor de inteligencia de la policía bonaerense, desde sus inicios en la Década Infame (1), hasta su definitiva institucionalización y jerarquización como labor policial hacia fines de los años cincuenta y principios de los sesenta. El trabajo presentado, pretendió comprender la historia institucional que enmarca a la fuente principal, los archivos de la Dirección de Inteligencia de la policía de la provincia de Buenos Aires, en diálogo con otros documentos, también propios de las fuerzas de seguridad. En este caso, los cambios que se fueron generando desde la institución de inteligencia policial a lo largo de todo el siglo XX, invitan a pensar cuáles fueron las lógicas y los mecanismos de la propia institución productora del archivo, (Muzzoppapa, 2010)

Lo aparente como real : Un análisis del sujeto 'comunista' en la creación y consolidación del servicio de inteligencia de la policía de la Provincia de Buenos Aires

Fil: Marengo, María Eugenia. Universidad Nacional de La Plata. Facultad de Humanidades y Ciencias de la Educación; Argentina.