Improving Information Problem Solving skills in Secondary Education through embedded instruction

This empirical study consists in an investigation of the effects, on the development of Information Problem Solving (IPS) skills, of a long-term embedded, structured and supported instruction in Secondary Education. Forty secondary students of 7th and 8th grades (13–15 years old) participated in the 2-year IPS instruction designed in this study. Twenty of them participated in the IPS instruction, and the remaining twenty were the control group. All the students were pre- and post-tested in their regular classrooms, and their IPS process and performance were logged by means of screen capture software, to warrant their ecological validity. The IPS constituent skills, the web search sub-skills and the answers given by each participant were analyzed. The main findings of our study suggested that experimental students showed a more expert pattern than the control students regarding the constituent skill ‘defining the problem’ and the following two web search sub-skills: ‘search terms’ typed in a search engine, and ‘selected results’ from a SERP. In addition, scores of task performance were statistically better in experimental students than in control group students. The paper contributes to the discussion of how well-designed and well-embedded scaffolds could be designed in instructional programs in order to guarantee the development and efficiency of the students’ IPS skills by using net information better and participating fully in the global knowledge society.

The effect of calculators on the numerical problem-solving skills and attitudes of primary students towards mathematics /

The purpose of this study was to determine the effect that calculators have on the attitudes and numerical problem-solving skills of primary students. The sample used for this research was one of convenience. The sample consisted of two grade 3 classes within the York Region District School Board. The students in the experimental group used calculators for this problem-solving unit. The students in the control group completed the same numerical problem-solving unit without the use of calculators. The pretest-posttest control group design was used for this study. All students involved in this study completed a computational pretest and an attitude pretest. At the end of the study, the students completed a computational posttest. Five students from the experimental group and five students from the control group received their posttests in the form of a taped interview. At the end of the unit, all students completed the attitude scale that they had received before the numerical problem-solving unit once again. Data for qualitative analysis included anecdotal observations, journal entries, and transcribed interviews. The constant comparative method was used to analyze the qualitative data. A t test was also performed on the data to determine whether there were changes in test and attitude scores between the control and experimental group. Overall, the findings of this study support the hypothesis that calculators improve the attitudes of primary students toward mathematics. Also, there is some evidence to suggest that calculators improve the computational skills of grade 3 students.

The role of exploration and critical decision making and problem solving in making life choices

Although the literature on the types of abilities and processes that contribute to identity formation has been growing, the research has been mainly descriptive/correlational. This dissertation conducted an experimental investigation of the role of two theoretically distinct processes (exploration and critical problem solving) in identity formation, one of the first to be reported. The experimental training design (pre-post, training versus control) used in this study was intended to promote identity development by fostering an increase in the use of exploration and critical problem solving with respect to making life choices. Participants included 53 psychology students from a large urban university randomly assigned to each group. The most theoretically significant finding was that the intervention was successful in inducing change in the ability to use critical skills in resolving life decisions, as well as effecting a positive change in identity status. ^

The role of exploration and critical decision making and problem solving in making life choices

Although the literature on the types of abilities and processes that contribute to identity formation has been growing, the research has been mainly descriptive/correlational. This dissertation conducted an experimental investigation of the role of two theoretically distinct processes (exploration and critical problem solving) in identity formation, one of the first to be reported. The experimental training design (pre-post, training versus control) used in this study was intended to promote identity development by fostering an increase in the use of exploration and critical problem solving with respect to making life choices. Participants included 53 psychology students from a large urban university randomly assigned to each group. The most theoretically significant finding was that the intervention was successful in inducing change in the ability to use critical skills in resolving life decisions, as well as effecting a positive change in identity status.

Evaluation of creative problem solving abilities in undergraduate structural engineers through interdisciplinary problem based learning

For a structural engineer, effective communication and interaction with architects cannot be underestimated as a key skill to success throughout their professional career. Structural engineers and architects have to share a common language and understanding of each other in order to achieve the most desirable architectural and structural designs. This interaction and engagement develops during their professional career but needs to be nurtured during their undergraduate studies. The objective of this paper is to present the strategies employed to engage higher order thinking in structural engineering students in order to help them solve complex problem-based learning (PBL) design scenarios presented by architecture students. The strategies employed were applied in the experimental setting of an undergraduate module in structural engineering at Queen’s University Belfast in the UK. The strategies employed were active learning to engage with content knowledge, the use of physical conceptual structural models to reinforce key concepts and finally, reinforcing the need for hand sketching of ideas to promote higher order problem-solving. The strategies employed were evaluated through student survey, student feedback and module facilitator (this author) reflection. The strategies were qualitatively perceived by the tutor and quantitatively evaluated by students in a cross-sectional study to help interaction with the architecture students, aid interdisciplinary learning and help students creatively solve problems (through higher order thinking). The students clearly enjoyed this module and in particular interacting with structural engineering tutors and students from another discipline

Rehabilitation of executive dysfunction: A controlled trial of an attention and problem solving treatment group

In this study, the effectiveness of a group-based attention and problem solving (APS) treatment approach to executive impairments in patients with frontal lobe lesions was investigated. Thirty participants with lesions in the frontal lobes, 16 with left frontal (LF) and 14 with right frontal (RF) lesions, were allocated into three groups, each with 10 participants. The APS treatment was initially compared to two other control conditions, an information/education (IE) approach and treatment-as-usual or traditional rehabilitation (TR), with each of the control groups subsequently receiving the APS intervention in a crossover design. This design allowed for an evaluation of the treatment through assessment before and after treatment and on follow up, six months later. There was an improvement on some executive and functional measures after the implementation of the APS programme in the three groups. Size, and to a lesser extent laterality, of lesion affected baseline performance on measures of executive function, but there was no apparent relationship between size, laterality or site of lesion and level of benefit from the treatment intervention. The results were discussed in terms of models of executive functioning and the effectiveness of domain specific interventions in the rehabilitation of executive dysfunction.

Comprensión en resolución de problemas en Física: niveles de representación e inferencias basadas en el conocimiento. Comprehension in Physics Problem-Solving: levels of representation and knowledge-based inferences.

Se propone desarrollar e integrar estudios sobre Modelado y Resolución de Problemas en Física que asumen como factores explicativos: características de la situación planteada, conocimiento de la persona que resuelve y proceso puesto en juego durante la resolución. Interesa comprender cómo los estudiantes acceden al conocimiento previo, qué procedimientos usan para recuperar algunos conocimientos y desechar otros, cuáles son los criterios que dan coherencia a sus decisiones, cómo se relacionan estas decisiones con algunas características de la tarea, entre otras. Todo ello con miras a estudiar relaciones causales entre las dificultades encontradas y el retraso o abandono en las carreras.Se propone organizar el trabajo en tres ejes, los dos primeros de construcción teórica y un tercero de implementación y transferencia. Se pretende.1.-Estudiar los procesos de construcción de las representaciones mentales en resolución de problemas de física, tanto en expertos como en estudiantes de diferentes niveles académicos.2.-Analizar y clasificar las inferencias que se producen durante las tareas de comprensión en resolución de problemas de física. Asociar dichas inferencias con procesos de transición entre representaciones mentales de diferente naturaleza.3.-Desarrollar materiales y diseños instruccionales en la enseñanza de la Física, fundamentado en un conocimiento de los requerimientos psicológicos de los estudiantes en diversas tareas de aprendizaje.En términos generales se plantea un enfoque interpretativo a la luz de marcos de la psicología cognitiva y de los desarrollos propios del grupo. Se trabajará con muestras intencionales de alumnos y profesores de física. Se utilizarán protocolos verbales y registros escritos producidos durante la ejecución de las tareas con el fin de identificar indicadores de comprensión, inferencias, y diferentes niveles de representación. Se prevé analizar material escrito de circulación corriente sea comercial o preparado por los docentes de las carreras involucradas.Las características del objeto de estudio y el distinto nivel de desarrollo en que se encuentran los diferentes ojetivos específicos llevan a que el abordaje contemple -según consideracion de Juni y Urbano (2006)- tanto la lógica cualitativa como la cuantitativa.

An Empirical Examination of the R&D Boundaries of the Firm - A Problem-Solving Perspective

We consider, both theoretically and empirically, how different organization modes are aligned to govern the efficient solving of technological problems. The data set is a sample from the Chinese consumer electronics industry. Following mainly the problem solving perspective (PSP) within the knowledge based view (KBV), we develop and test several PSP and KBV hypotheses, in conjunction with competing transaction cost economics (TCE) alternatives, in an examination of the determinants of the R&D organization mode. The results show that a firm’s existing knowledge base is the single most important explanatory variable. Problem complexity and decomposability are also found to be important, consistent with the theoretical predictions of the PSP, but it is suggested that these two dimensions need to be treated as separate variables. TCE hypotheses also receive some support, but the estimation results seem more supportive of the PSP and the KBV than the TCE.

The association between need for touch and desire for unique products and consumer (inter)dependent problem-solving

Some people cannot buy products without first touching them, believing that doing so will create more assurance and information and reduce uncertainty. The international consumer marketing literature suggests an instrument to measure consumers' necessity for pohysical contact, called Need for Touch (NFT). This paper analyzes whether the Need for Touch structure is empirically consistent. Based on a literature review, we suggest six hypotheses in order to assess the nomological, convergent, and discriminant validity of the phenomenon. Departing from these, data supported four assumptions in the predicted direction. Need for Touch was associated with Need for Input and with Need for Cognition. Need for Touch was not associated with traditional marketing channels. The results also showed the dual characterization of Need for Touch as a bi-dimensional construct. The moderator effect indicated that when the consumer has a higher (vs. lower) Need for Touch autotelic score, the experiential motivation for shopping played a more (vs. less) important role in impulsive motivation. Our Study 3 supports the NFT structure and shows new associations with the need for unique products and dependent decisions.

Measurement Problems and Problem-Solving in Kraft Pulping

Tämän työn tarkoituksena on koota yhteen selluprosessin mittausongelmat ja mahdolliset mittaustekniikat ongelmien ratkaisemiseksi. Pääpaino on online-mittaustekniikoissa. Työ koostuu kolmesta osasta. Ensimmäinen osa on kirjallisuustyö, jossa esitellään nykyaikaisen selluprosessin perusmittaukset ja säätötarpeet. Mukana on koko kuitulinja puunkäsittelystä valkaisuun ja kemikaalikierto: haihduttamo, soodakattila, kaustistamo ja meesauuni. Toisessa osassa mittausongelmat ja mahdolliset mittaustekniikat on koottu yhteen ”tiekartaksi”. Tiedot on koottu vierailemalla kolmella suomalaisella sellutehtaalla ja haastattelemalla laitetekniikka- ja mittaustekniikka-asiantuntijoita. Prosessikemian paremmalle ymmärtämiselle näyttää haastattelun perusteella olevan tarvetta, minkä vuoksi konsentraatiomittaukset on valittu jatkotutkimuskohteeksi. Viimeisessä osassa esitellään mahdollisia mittaustekniikoita konsentraatiomittausten ratkaisemiseksi. Valitut tekniikat ovat lähi-infrapunatekniikka (NIR), fourier-muunnosinfrapunatekniikka (FTIR), online-kapillaarielektroforeesi (CE) ja laserindusoitu plasmaemissiospektroskopia (LIPS). Kaikkia tekniikoita voi käyttää online-kytkettyinä prosessikehitystyökaluina. Kehityskustannukset on arvioitu säätöön kytketylle online-laitteelle. Kehityskustannukset vaihtelevat nollasta miestyövuodesta FTIR-tekniikalle viiteen miestyövuoteen CE-laitteelle; kehityskustannukset riippuvat tekniikan kehitysasteesta ja valmiusasteesta tietyn ongelman ratkaisuun. Työn viimeisessä osassa arvioidaan myös yhden mittausongelman – pesuhäviömittauksen – ratkaisemisen teknis-taloudellista kannattavuutta. Ligniinipitoisuus kuvaisi nykyisiä mittauksia paremmin todellista pesuhäviötä. Nykyään mitataan joko natrium- tai COD-pesuhäviötä. Ligniinipitoisuutta voidaan mitata UV-absorptiotekniikalla. Myös CE-laitetta voitaisiin käyttää pesuhäviön mittauksessa ainakin prosessikehitysvaiheessa. Taloudellinen tarkastelu pohjautuu moniin yksinkertaistuksiin ja se ei sovellu suoraan investointipäätösten tueksi. Parempi mittaus- ja säätöjärjestelmä voisi vakauttaa pesemön ajoa. Investointi ajoa vakauttavaan järjestelmään on kannattavaa, jos todellinen ajotilanne on tarpeeksi kaukana kustannusminimistä tai jos pesurin ajo heilahtelee eli pesuhäviön keskihajonta on suuri. 50 000 € maksavalle mittaus- ja säätöjärjestelmälle saadaan alle 0,5 vuoden takaisinmaksuaika epävakaassa ajossa, jos COD-pesuhäviön vaihteluväli on 5,2 – 11,6 kg/odt asetusarvon ollessa 8,4 kg/odt. Laimennuskerroin vaihtelee tällöin välillä 1,7 – 3,6 m3/odt asetusarvon ollessa 2,5 m3/odt.