Jäähdytysjärjestelmän vaikutus kiinteistön elinkaaren aikaisiin tuottoihin

Ilmastoinnin jäähdytys yleistyy toimisto- ja hotellikiinteistöissä jatkuvasti. Perinteinen tapa tuottaa jäähdytysenergia on kiinteistökohtainen vedenjäähdytysjärjestelmä. Helsingissä on ollut vuodesta 2000 lähtien mahdollista liittyä Helsingin energian kaukojäähdytysverkostoon. Jäähdytysjärjestelmien ominaisuudet poikkeavat toisistaan ja niistä aiheutuu kiinteistönomistajalle erilaisia kustannuksia. Kiinteistöstä saataviin tuottoihin vaikuttaa kustannusten lisäksi vuokralaisen tyytyväisyys. Tämän vuoksi työssä selvitettiin vuokralaisen tarpeet jäähdytysjärjestelmälle haastattelemalla vuokralaisen edustajia. Tässä diplomityössä vertaillaan kaukojäähdytyksen ja kiinteistökohtaisen jäähdytysjärjestelmän kustannuksia, sekä vaikutuksia kiinteistön elinkaarituottoihin kiinteistönomistajan näkökulmasta. Kerättyjen kustannusten perusteella suoritetaan elinkaarikustannuslaskenta GaBi-ohjelmalla. Vuokralaisen tarpeista jäähdytysjärjestelmälle tunnistetaan olennaisiksi toimintavarmuus, ympäristöystävällisyys sekä hiljainen äänitaso. Nämä ovat lisäarvotekijöitä, joille työssä määritetään painoarvo ja jotka huomioidaan laskennassa. Diplomityö osoitti kaukojäähdytyksen kannattavaksi vaihtoehdoksi kiinteistökohtaiselle järjestelmälle, kun huomioidaan hankinta- ja käyttökustannusten lisäksi asennustöiden, käyttöönoton, huollon ja kunnossapidon sekä loppusijoituksen kustannukset. Myös valikoituneet lisäarvotekijät puoltavat kaukojäähdytystä ja niiden kompensointi lisää kiinteistökohtaisen järjestelmän kustannuksia.

Kaukokylmä talotekniikassa

Tässä työssä on tarkasteltu rakennusten jäähdytysratkaisuja kaukokylmää käyttäen. Erilaisten kytkentäkaavioiden ja niihin liittyvien mitoitusarvojen perusteella on selvitetty taloteknisten järjestelmien kylmänjakelutapoja. Malliratkaisujen avulla on selvitetty myös järjestelmien investointikustannuksia ja mahdollisia riskejä. Työssä on keskitytty vesikiertoisiin järjestelmiin.

Kaukojäähdytysverkon rakennevaihtoehdot

Kaukojäähdytyksellä tarkoitetaan keskitetysti tuotetun jäähdytysenergian jakamista kiinteistöihin jakeluverkossa kiertävän kylmän veden välityksellä, eli kaukojäähdytys on ulkoistettu jäähdytysratkaisu. Jäähdytysenergiaa tarvitaan työtehon, viihtyisyyden ja sisäilman laadun parantamiseksi, sekä joidenkin prosessien tarpeisiin. Siinä missä perinteinen kiinteistökohtainen jäähdytysjärjestelmä tuottaa jäähdytysenergian sähköllä, käytetään kaukojäähdytyksessä jäähdytysenergian tuottamiseen sellaisia resursseja, jotka muuten jäisivät käyttämättä. Tästä syystä kaukojäähdytys vähentää merkittävästi hiilidioksidipäästöjä, jonka lisäksi kaukojäähdytys vähentää kylmäkoneissa käytettävien kylmäaineiden aiheuttamia kasvihuonekaasupäästöjä. Kaukolämpöverkkoa muistuttavan kaukojäähdytysverkon rakentaminen vaatii suuria investointeja. Nykyisin jakeluverkon rakenteena käytetään 2Mpuk- rakennetta, jonka todettiin olevan teknistaloudellisesti soveltuvin vaihtoehto Helsingin Energian kaukojäähdytysverkkoon. Myös PE 100 putkia voitaisiin käyttää PN 16 paineluokassa alle DN 300 kokoluokkaa vastaavissa johdoissa, ja PN 10 paineluokassa alle DN 400 johdoissa. Kaukolämpöverkon paineluokan valinta vaikuttaa oleellisesti investointikustannuksiin PE- putkilla ja joillekin alueille kannattanee rakentaa alemman paineluokan omaava erillisverkko PE- putkista. Happidiffuusion kautta PE- putkista pääsee jonkin verran happea verkkoon, mutta määrät ovat melko pieniä, eikä muitakaan teknisiä esteitä hyvin korroosiota kestävien PE- putkien käytölle ole. 2Mpuk- rakenteelle suurimman riskin aiheuttaa elementtien liitoskohdista teräsputken pinnalle pääsevä ulkopuolinen vesi. Koska kaukojäähdytysjohdot ovat lisäksi yleensä ympäristöä kylmempiä, kondensoivat ne vettä pinnallensa kaukolämpöjohdoista poiketen. Ulkopuolisen veden aiheuttamaa riskiä voitaisiin pienentää eristämällä liitoskohdat sähkömuhveilla. Verkoston rakentamiskustannuksia ja liikenteelle aiheutuvia haittoja voidaan vähentää ojattomia rakentamismenetelmiä, kuten suuntaporausta käyttämällä.

Kaukojäähdytyksen potentiaali ja kannattavuus Oulun keskustan alueella

Diplomityö on tehty Oulun Energian kaukolämpöosastolle. Työn tavoitteena oli selvittää kaukojäähdytyksen asiakaspotentiaali Oulun keskustan alueella sekä tehdä esiselvitys kaukojäähdytysinvestoinnin kannattavuudesta. Potentiaalin kartoituksessa otettiin huomioon sekä nykyiset rakennukset että lähitulevaisuuden lisärakentaminen. Jäähdytyskuormaksi Oulun keskustassa saatiin 28 MW, josta suurin osa on liiketiloja, toimistorakennuksia sekä hotelleja. Investoinnin kannattavuutta tutkittiin perinteisillä investointilaskennan menetelmillä. Kustannusarvio perustuu vapaajäähdytykseen ja absorptiojäähdytykseen ja tuotantolaitoksen sijoittamiseen kalliotiloihin. Tuottojen arviointia varten määriteltiin alustava kaukojäähdytystariffi sekä kolme erilaista kasvumallia. Tulosten perusteella investointi vaikuttaisi kannattamattomalta. Pääsyynä kannattamattomuuteen on kallis alkuinvestointi, jossa etenkin louhinnan osuus on merkittävä. Toisena syynä kannattamattomuuteen voidaan pitää potentiaalisten kaukojäähdytykseen liitettävien rakennusten melko pientä kokoa Oulun keskustassa.

Structural and operational optimisation : applications in energy systems

In this work mathematical programming models for structural and operational optimisation of energy systems are developed and applied to a selection of energy technology problems. The studied cases are taken from industrial processes and from large regional energy distribution systems. The models are based on Mixed Integer Linear Programming (MILP), Mixed Integer Non-Linear Programming (MINLP) and on a hybrid approach of a combination of Non-Linear Programming (NLP) and Genetic Algorithms (GA). The optimisation of the structure and operation of energy systems in urban regions is treated in the work. Firstly, distributed energy systems (DES) with different energy conversion units and annual variations of consumer heating and electricity demands are considered. Secondly, district cooling systems (DCS) with cooling demands for a large number of consumers are studied, with respect to a long term planning perspective regarding to given predictions of the consumer cooling demand development in a region. The work comprises also the development of applications for heat recovery systems (HRS), where paper machine dryer section HRS is taken as an illustrative example. The heat sources in these systems are moist air streams. Models are developed for different types of equipment price functions. The approach is based on partitioning of the overall temperature range of the system into a number of temperature intervals in order to take into account the strong nonlinearities due to condensation in the heat recovery exchangers. The influence of parameter variations on the solutions of heat recovery systems is analysed firstly by varying cost factors and secondly by varying process parameters. Point-optimal solutions by a fixed parameter approach are compared to robust solutions with given parameter variation ranges. In the work enhanced utilisation of excess heat in heat recovery systems with impingement drying, electricity generation with low grade excess heat and the use of absorption heat transformers to elevate a stream temperature above the excess heat temperature are also studied.

Adsorptiojäähdyttimen käytön kannattavuus kaukolämpöjärjestelmässä

Vantaa Energy has decided to find out the district cooling business opportunities in Vantaa. One reason for starting up the cooling business is Vantaa Energy's waste-to-energy power plant which is under construction. In the future, especially in the summer time there is an oversupply of district heating because of the new power plant. The cooling using the district heat could be one way to increase the consumption of district heat in the summer. This thesis examines the use of adsorption cooling profitability. Adsorption refrigerator is a machine which uses heat as the driving energy. At Vantaa Energy's case, district heat produced at cogeneration plants would be used. The literature section of this thesis includes descriptions of district cooling, building cooling demand, as well as different ways to produce cooling energy. A tool for profitability calculations was made. It shows the payback period, internal rate of return and net present value of different projects. Based on the calculations adsorption refrigeration is not profitable. This is primarily due to the high price of the adsorption refrigerator. Payback periods become long even when the used heat energy is free. In addition, the lack of availability of the refrigerators and operating experience could become a partial barrier to the use of technology even if the investment would become profitable.

Developing asset management in district heating and cooling business in a large energy company

The purpose of this Master´s Thesis is to develop asset management and its practices in case company. District heating and cooling systems operated by case company around Finland, Sweden, Poland and the Baltics form an enormous-sized asset base where some parts are starting to reach their end of life-cycles. Large-sized asset renewal actions are under discussion and maintenance spending is increasing. Financially justified decisions in changing business environment are needed. Asset management is one of the most important concepts for production organization which operates with capital-intensive production assets. Organizations profitability is highly dependent on assets´ performance. Such assets, like district heating and cooling systems, should be utilized as efficiently as possible within their life-cycles but also maintained and renewed optimally. In this qualitative thesis, empirical interview study was conducted to describe the current situation on how the assets are managed in the case company and to examine the readiness to implement a new, risk-based solution. Asset management revealed to be a very well-known concept. From proposed risk-based asset management point of view, several key observations were made. It was seen as a suitable solution, but further development will be needed. Based on the need and findings, several key processes and frameworks were created and also tested with a case study. Assets` condition monitoring should be improved, which would have a positive impact on event probability assessment. Risk acceptance is also a thing to be discussed further. When the evaluation becomes fluent in single investment cases, portfolio-level expansion should be considered and started. As a result, thesis proposes a solution how risk-based asset management could be performed practically in a capital-intensive case company in order to optimize the maintenance spending in a long run. Created practical framework is made universal: similar principles can be applied into multiple cases in case company but also in other energy companies. Risk-based asset management`s benefits could be utilized best in portfolio-level optimization where the capital would be invested to the most important objects from total risk point of view. Eventually, such approach would allow case company to optimize capital spending in a situation where funds are not adequate to cover all the mandatory needs and prioritization between the investment alternatives will truly be needed.

Lincoln installs district heating/cooling system.

Mode of access: Internet.

The hypogene iron oxide copper-gold mineralization in the Mantoverde District, Northern Chile

The Mantoverde iron oxide copper-gold (IOCC) district, northern Chile, is known for its Cu production from supergene ores. Recently, exploration outlined an additional hypogene ore resource of 440 Mt with 0.56 percent Cu, and 0.12 g/t An. The hypogene sulfide mineralization occurs mainly as chalcopyrite and pyrite, typically in specularite or magnetite-cemented breccias and associated stockworks. The host rocks underwent variably intense K feldspar alteration, chloritization, sericitization, silicification, and/or carbonatization. A district scale Na(-Ca) alteration is absent. The IOCC mineralization in the district shows a strong tectonic control by northwest- to north-northwest-trending brittle structures. Large Cu sulfide-rich veins or Cu sulfide-cemented breccias are absent. Therefore, head grades of 4 percent Cu are an exception. There is a positive correlation between Cu and An grades. Gold is probably contained mostly in chalcopyrite and pyrite. Elevated concentrations of light rare-earth elements (LREE) occur locally but are attributed to redistribution of LREE within the deposits rather than to derivation from external sources. The Cu-Au ores in the Mantoverde district are low in and have relatively low contents in heavy metals that are potentially hazardous to the environment, such as As (avg 14 ppm), Hg (<5 ppm), or Cd (<0.2 ppm). The sulfur isotope ratios of chalcopyrite from the IOCC deposits lie between -5.6 and 8.9 per mil delta(34)S(VCDT). They show systematic variations within the district, which are interpreted to reflect relative distance to inferred fluid conduits and the level of deposition within the hydrothermal system. Most initial (87)Sr/(86)Sr values of altered volcanic rocks and hydrothermal calcite from the Mantoverde district are between 0.7031 and 0.7060 and are similar to those of the igneous rocks of the region. Lead isotope ratios of chalcopyrite are consistent with Pb (and by inference Cu) derived from Early Cretaceous magmatism. The sulfur, strontium, and lead isotope data of chalcopyrite, calcite gangue, or altered host rocks, respectively, are compatible with a genetic model that involves cooling of metal and sulfur-bearing magmatic-hydrothermal fluids that mix with meteoric waters or seawater at relatively shallow crustal levels. An additional exotic sulfur input is likely, though not required, for the copper mineralization. Apart from the IOCC. deposits, there are a number of smaller magnetite(-apatite) bodies in the district. These are geologically similar to the Cu-Au-bearing magnetite bodies, but are related to splays of the north-south-trending Atacama fault zone and differ in alteration and texture.

Optimization of a dynamic district heating power plant

The purpose of this Thesis is to find the most optimal heat recovery solution for Wärtsilä’s dynamic district heating power plant considering Germany energy markets as in Germany government pays subsidies for CHP plants in order to increase its share of domestic power production to 25 % by 2020. Different heat recovery connections have been simulated dozens to be able to determine the most efficient heat recovery connections. The purpose is also to study feasibility of different heat recovery connections in the dynamic district heating power plant in the Germany markets thus taking into consideration the day ahead electricity prices, district heating network temperatures and CHP subsidies accordingly. The auxiliary cooling, dynamical operation and cost efficiency of the power plant is also investigated.

ClimateWell TDC with District Heat

The PolySMART demonstration system SP1b has been modeled in TRNSYS and calibrated against monitored data. The system is an example of distributed cooling with centralized CHP, where the driving heat is delivered via the district heating network. The system pre-cools the cooling water for the head office of Borlänge municipality, for which the main cooling is supplied by a 200 kW compression chiller. The SP1b system thus provides pre-cooling. It consists of ClimateWell TDC with nominal capacity of 10 kW together with a dry cooler for recooling and heat exchangers in the cooling and driving circuits. The cooling system is only operated from 06:00 to 17:00 during working days, and the cooling season is generally from mid May to mid September. The nominal operating conditions of the main chiller are 12/15°C. The main aims of this simulation study were to: reduce the electricity consumption, and if possible to improve the thermal COP and capacity at the same time; and to study how the system would perform with different boundary conditions such as climate and load. The calibration of the system model was made in three stages: estimation of parameters based on manufacturer data and dimensions of the system; calibration of each circuit (pipes and heat exchangers) separately using steady state point; and finally calibration of the complete model in terms of thermal and electrical energy as well as running times, for a five day time series of data with one minute average data values. All the performance figures were with 3% of the measured values apart from the running time for the driving circuit that was 4% different. However, the performance figures for this base case system for the complete cooling season of mid-May to midSeptember were significantly better than those for the monitoring data. This was attributed to long periods when the monitored system was not in operation and due to a control parameter that hindered cold delivery at certain times. 

Determination Of Tetrakis(hydroxymethyl)phosphonium Sulfate In Commercial Formulations And Cooling Water By Capillary Electrophoresis With Contactless Conductivity Detection.

A novel capillary electrophoresis method using capacitively coupled contactless conductivity detection is proposed for the determination of the biocide tetrakis(hydroxymethyl)phosphonium sulfate. The feasibility of the electrophoretic separation of this biocide was attributed to the formation of an anionic complex between the biocide and borate ions in the background electrolyte. Evidence of this complex formation was provided by (11) B NMR spectroscopy. A linear relationship (R(2) = 0.9990) between the peak area of the complex and the biocide concentration (50-900 μmol/L) was found. The limit of detection and limit of quantification were 15.0 and 50.1 μmol/L, respectively. The proposed method was applied to the determination of tetrakis(hydroxymethyl)phosphonium sulfate in commercial formulations, and the results were in good agreement with those obtained by the standard iodometric titration method. The method was also evaluated for the analysis of tap water and cooling water samples treated with the biocide. The results of the recovery tests at three concentration levels (300, 400, and 600 μmol/L) varied from 75 to 99%, with a relative standard deviation no higher than 9%.

A Rapid And Simple Capillary Electrophoresis Method For Indirect Determination Of The Biocide 2,2-dibromo-3-nitrilo-propionamide (dbnpa) In Cooling Waters.

A capillary zone electrophoresis (CE) method was developed for the determination of the biocide 2,2-dibromo-3-nitrilo-propionamide (DBNPA) in water used in cooling systems. The biocide is indirectly determined by CE measurement of the concentration of bromide ions produced by the reaction between the DBNPA and bisulfite. The relationship between the bromide peak areas and the DBNPA concentrations showed a good linearity and a coefficient of determination (R(2)) of 0.9997 in the evaluated concentration range of 0-75 μmol L(-1). The detection and quantification limits for DBNPA were 0.23 and 0.75 μmol L(-1), respectively. The proposed CE method was successfully applied for the analysis of samples of tap water and cooling water spiked with DBNPA. The intra-day and inter-day (intermediary) precisions were lower than 2.8 and 6.2%, respectively. The DBNPA concentrations measured by the CE method were compared to the values obtained by a spectrophotometric method and were found to agree well.

Phlebotomines (Diptera, Psychodidae) in the Speleological Province of the Ribeira Valley: 3. Serra district - area of hostels for tourists who visit the Parque Estadual do Alto Ribeira (PETAR), state of São Paulo, Brazil

Phlebotomines (Diptera, Psychodidae) in the Speleological Province of the Ribeira Valley: 3. Area of hostels for tourists who visit the Parque Estadual do Alto Ribeira (PETAR), state of São Paulo, Brazil. The study characterizes some ecological aspects of the phlebotomine fauna in an endemic area of cutaneous leishmaniasis (CL) situated in the Serra district, Iporanga municipality where the hostels for tourists visiting the PETAR are located. Captures were undertaken on a smallholding and a small farm situated near the hostels, monthly between January/2001 and December/2003 with automatic light traps (ALT) in pigsty, hen-house and veranda of a domicile at the two sites, and in peridomicile of the small farm also with black/white Shannon traps. With the ALT a total of 87,224 phlebotomines representing 19 species and also two hybrids of Nyssomyia intermedia (Lutz & Neiva) and Nyssomyia neivai (Pinto) and two anomalous specimens were captured. The standardized index species abundance was for Ny. intermedia = 1.0 and Ny. neivai = 0.935. The highest frequencies of the smallholding occurred in the pigsty, the Williams' mean/capture for Ny. intermedia being 63.7 specimens and for Ny. neivai 29.2, and on the small farm, in the hen-house, Ny. intermedia 402.6 and Ny. neivai 116.2. A total of 863 phlebotomines (Ny. intermedia: 75.4%; Ny. neivai: 24.3%) were captured with black/white Shannon traps; females of both species being predominant in the white trap. The high frequencies of Ny. intermedia and Ny. neivai, both implicated in CL transmission, indicate the areas presenting risk of the disease.

Environmental conditions and rodent infestation in Campo Limpo district, Sao Paulo municipality, Brazil

Rodents are involved in the transmission to human beings of several diseases, including liptospirosis, which shows high lethality rates in Sao Paulo municipality. Despite this, few studies have assessed the relationship existing between urban environmental conditions and building rodent infestation. With the purpose of clarifying this relationship, an analysis has been conducted in order to quantify the influence of environmental factors upon rodent infestation on a low-income district. Diagnosis of the environmental situation has been performed to evaluate the frequency according to which harborage, food and access sources occur, and a survey on infestation rates in 2175 dwellings in the area studied. The logistic regression analysis showed that among the environmental variables, the one that showed the closest association with rodent infestation was access; followed by harborage, and food. It was concluded that poor socioeconomic and environmental conditions in the area propitiate the occurrence of high rodent infestation rates