Diastereoselective Lithiation-Substitution of N-Silyl-Protected-(S)-Tetrahydro-1H-pyrrolo[1,2-c]imidazole-3(2H)-ones and Applications of Their Derivatives

This thesis describes a method involving the preparation of an L-proline-derived imidazolone protected with an N-triethylsilyl group that undergoes diastereoselective lithiation followed by electrophile quench to give C5-substituted products with syn stereochemistry. The N-silylated derivatives may be more easily N-deprotected as compared to previous N-t-Bu analogues to give secondary ureas. These may serve as precursors to N-phenyl chiral bicyclic guanidines or as NHC precursors for synthesis of corresponding complexes.

Diastereoselective Lithiation-Substitution of N-Silyl-Protected-(S)-Tetrahydro-1H-pyrrolo[1,2-c]imidazole-3(2H)-ones and Applications of Their Derivatives

This thesis describes a method involving the preparation of an L-proline-derived imidazolone protected with an N-triethylsilyl group that undergoes diastereoselective lithiation followed by electrophile quench to give C5-substituted products with syn stereochemistry. The N-silylated derivatives may be more easily N-deprotected as compared to previous N-t-Bu analogues to give secondary ureas. These may serve as precursors to N-phenyl chiral bicyclic guanidines or as NHC precursors for synthesis of corresponding complexes.

Diastereoselective Synthesis of Planar Chiral N-Substituted Ferrocenes Derived from Epimeric Imidazolones and their Application to Asymmetric Hydrogenation of Quinolines

This thesis describes the synthesis and use of an N-substituted ferrocene bearing a proline-derived chiral directing group and diastereoselective lithiation-electrophile quench of the pro-Sp hydrogen of the ferrocene to give planar chiral products in >95:5 dr. The auxiliary group is found to be stable to lithium bases of types RLi and R2NLi giving the same diastereoselectivity. The anti- epimer of the previously mentioned syn auxiliary induces lithiation of pro Rp rather than pro Sp hydrogen in >95:5 dr. Upon electrophile quench and elimination, the enantiomer of the syn-derived planar chiral imidazolone is obtained. Hence, this method provides a practical way to prepare planar chiral enantiomers in this series without the use of a more expensive D-proline derived starting material. The syn and anti epimers have β, γ-stereogenic centers and the origin of stereoselectivity in lithiation appears to be driven by the conformational bias exerted by the β-silyloxy moiety in each chiral auxiliary. In the thesis, this conclusion is supported using insensitivity of lithiation selectivity to the bulkiness of the base, comparison of enantiomers, deuteration experiments, nOe difference studies and computational modeling of the ground states and lithiation transition states for both substrates. The products are then converted to ligand precursors to make iridium and rhodium complexes. Among them, one of the cationic iridium complex is found to be effective in the asymmetric hydrogenation of 2-substituted quinolines with enantioselectivities up to 80% at pressures as low as 5 atm.

A Bicyclic L-Proline Derived Chiral Auxiliary for Asymmetric Synthesis

This thesis describes the use of an L−proline-derived chiral auxiliary for diastereoselective lithiation and ligand synthesis. Such compounds have been utilized in the Metallinos research group previously for the synthesis of N−substituted planar chiral ferrocenes. The first project describes the use of this chiral auxiliary as a directing group for N−benzyl substitution, providing products in up to 10:1 diastereomeric ratio (dr). These derivatives may serve as chiral ylidene precursors to serve as ligands in transition metal catalysis. In addition, an N−substituted planar chiral ferrocene ylidene ligand derived from the same chiral auxiliary was used to prepare rhodium complexes that were explored as potential catalysts for asymmetric hydroformylation.

Pre-lithiation of onion-like carbon/MoS2 nano-urchin anodes for high-performance rechargeable lithium ion batteries

Hybrid urchin-like nanostructures composed of a spherical onion-like carbon (OLC) core and MoS2 nanoleaves were synthesized by a simple solvothermal method followed by thermal annealing treatment. Compared to commercial MoS2 powder, MoS2/OLC nanocomposites exhibit enhanced electrochemical performance as anode materials of lithium-ion batteries (LIBs) with a specific capacity of 853 mA h g−1 at a current density of 50 mA g−1 after 60 cycles, and a moderate initial coulombic efficiency of 71.1%. Furthermore, a simple pre-lithiation method based on direct contact of lithium foil with MoS2/OLC nano-urchins was used to achieve a very high coulombic efficiency of 97.6% in the first discharge/charge cycle, which is at least 26% higher compared to that of pristine MoS2/OLC nano-urchins. This pre-lithiation method can be generalized to develop other carbon-metal sulfide nanohybrids for LIB anode materials. These results may open up a new avenue for the development of the next-generation high-performance LIBs.

Highly regio-, chemo- and diastereoselective synthesis of oxa-bridged spirocycles: A novel observation of reverse selectivity

The reverse regio- and diastereoselectivities are observed between the reactions involving 5- and 6-membered-ring cyclic carbonyl ylide dipoles with alpha-methylene ketones. A mild catalytic route to synthesize spirocyclic systems with high regio-, chemo- and diastereoselectivities is described.

Diastereoselective reduction of α-keto esters derived from functionalised cholic acid

The reduction of phenylglyoxalate 2a and pyruvate 2b with LiBH4 in THF at -80 degrees C yield the corresponding alpha-hydroxy esters with ca. 70% diastereoselectivity.

The effect of electrochemical lithiation on physicochemical properties of RF-sputtered Sn thin films

Thin films of Sn were deposited on Pt/Si substrates by sputtering technique and subjected to electrochemical lithiation studies. Electrochemical lithiation of Sn resulted in the formation of Sn-Li alloys of different compositions. Charging of Sn-coated Pt/Si electrodes was terminated at different potentials and the electrodes were examined for physicochemical properties. The scanning electron microscopy and atomic force microscopy images suggested that the Sn films expanded on lithiation. Roughness of the film increased with an increase in the quantity of Li present in Sn-Li alloy. Electrochemical impedance data suggested that the kinetics of charging became sluggish with an increase in the quantity of Li in Sn-Li alloy.

Real-Time Stress Measurements in Germanium Thin Film Electrodes during Electrochemical Lithiation/Delithiation Cycling

An in situ study of stress evolution and mechanical behavior of germanium as a lithium-ion battery electrode material is presented. Thin films of germanium are cycled in a half-cell configuration with lithium metal foil as counter/reference electrode, with 1M LiPF6 in ethylene carbonate, diethyl carbonate, dimethyl carbonate solution (1:1:1, wt%) as electrolyte. Real-time stress evolution in the germanium thin-film electrodes during electrochemical lithiation/delithiation is measured by monitoring the substrate curvature using the multi-beam optical sensing method. Upon lithiation a-Ge undergoes extensive plastic deformation, with a peak compressive stress reaching as high as -0.76 +/- 0.05 GPa (mean +/- standard deviation). The compressive stress decreases with lithium concentration reaching a value of approximately -0.3 GPa at the end of lithiation. Upon delithiation the stress quickly became tensile and follows a trend that mirrors the behavior on compressive side; the average peak tensile stress of the lithiated Ge samples was approximately 0.83 GPa. The peak tensile stress data along with the SEM analysis was used to estimate a lower bound fracture resistance of lithiated Ge, which is approximately 5.3 J/m(2). It was also observed that the lithiated Ge is rate sensitive, i.e., stress depends on how fast or slow the charging is carried out. (C) The Author(s) 2015. Published by ECS. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 License (CC BY, http://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse of the work in any medium, provided the original work is properly cited. All rights reserved.

Diastereoselective assembly of pentanuclear circular helicates

Reaction of a ligand which contains two N-donor and O-donor tridentate domains separated by a 1,3-phenylene spacer unit with Zn2+ ions results in a pentanuclear circular helicate [Zn5(L)5]10+ and this structure persists in both the solid and solution state. The formation of this high nuclearity species is governed by unfavourable steric interactions between the phenyl units which destabilize the simple linear helicate. Incorporation of enantiopure units within the ligand strand controls the diastereoselectivity with up to 80% d.e.

Synthesis of a tri(organoplatinum) complex via the double directed lithiation of a mono(organoplatinum) precursor

The new diarylplatinum complex Cis-[Pt(PEt(3))(2){C6H3(CH(2)NMe(2))(2)-3,5}(2)] 1, containing four free amine coordination sites, undergoes directed lithiation with Bu(t)Li and subsequent transmetallation with [PtCl2(SEt(2))(2)] to give a triplatinum species 3 which reductively eliminates the diplatinum complex[ClPt{2,6-(Me(2)NCH(2))(2)C6H2-C6H2(CH(2)NMe(2))(2)-2,6}PtCl] 4.

Diastereoselective 1,3-dipolar cycloaddition of pyrylium ylides with chiral enamides

Chiral enamides5f-i were found to react with pyrylium ylides to give cycloadducts 6d-i in good yields with an excellent level of stereoselectivity. The chiral auxiliary was successfully removed on hydrogenolysis of compound 6f in continuous flow (H-Cube) resulting in the first asymmetric synthesis of complex amine 8.

Highly diastereoselective hydrosilylations of allylic alcohols

The highly syn-selective hydrosilylation of allylic alcohols was developed which, following oxidation, provided 1,3 alcohols containing two contiguous stereocentres. Through judicious choice of silane the complementary anti-selective hydrosilylation was also developed. This protocol was applied to the synthesis of an all syn polyketide stereotriad. © 2014 The Royal Society of Chemistry.

Stereoselective synthesis of substituted hexahydro-3a,4a-diazacyclopentaphenanthren-4-ones and aminoferrocenes

This thesis explored the development of several methodologies for the stereoselective construction of ligand frameworks and some of their applications. The first segment concerns the application of an enantioselective lithiation at an Sp3_ hybridized position adjacent to nitrogen by means of the widely used and typically highly effective enantioselective lithiation with ( -)-sparteine. This investigation was intended to develop a method to install chirality into a system that would be converted into a family of diaminoylidenes for use as phosphine mimics in transition metal catalysis or as nucleophilic reagents. Molecular modeling of the system revealed some key interactions between the substrate and (-)-sparteine that provided general insight into the diamine's mode of action and should lend some predictive value to its future applications. The second portion focuses on the development of methods to access 1,2- disubstituted aminoferrocenes, an underexplored class of metallocenes possessing planar chirality. Two routes were examined involving a diastereoselective and an enantioselective pathway, where the latter method made use of the first BF3-mediated lithiation-substitution to install planar chirality. Key derivatives such as 1,2- aminophosphines, made readily accessible by the new route, were evaluated as ligands for Pd(II), Pt(II) and Ir(I). These complexes show activity in a number of transformations with both achiral and prochiral substrates. Optimization experiments were conducted to prepare enantiomerically enriched 2-substituted-I-aminoferrocenes by direct asymmetric lithiation of BF3-coordinated tertiary aminoferrocenes. A predictive computational model describing the transition state of this reaction was developed in collaboration with Professor Travis Dudding's group (Department of Chemistry, Brock University). The predicted stereochemistry of the process was confirmed by single-crystal X-ray analysis of a 2-phosphino-l-dimethylaminoferrocene derivative. Enantiomerically pure samples of the aminophosphine ligands derived from this new process have given promising preliminary results in the enantioselective hydrogenation of prochiral alkenes and warrant further stUdy in metal-mediated catalysis.

Understanding the Origin of Selectivity in the Asymmetric Lithiation Reaction of N-Heterocycles: A Theoretical Study

The natural abundance of the N-heterocycle containing compounds has pushed the synthetic community toward the invention of new synthetic methods that result in the structural diversity of N-heterocycles. Among this, is the efficient and highly selective diamine mediated asymmetric lithiation process. Amongst the diamine chiral ligands, (-)-sparterine, which is a naturally occurring alkaloid proved to be an efficient one. Many successful, good yielding and highly selective lithiation reactions have been accomplished with the mediation by this chiral diamine base. Although, there are some examples of experimental and theoretical mechanistic studies in the literature, there is a lack of detailed understanding as to how it exactly induces the chirality. In this thesis is described a systematic investigation of how (-)-sparteine influences the stereoselectivity in the course of asymmetric lithiation reaction. This led us to the establishment of the function of A-ring’s β-CH2 effect and D-ring effect. Consequently, the importance of the A-ring and D-ring portions of (-)-sparteine in the stereoselectivity is unraveled. Another part of this thesis deals with the asymmetric lithiation of BF3-activated N,N- dimethylaminoferrocene in the presence of (1R, 2R)-N1,N2-bis(3,3-dimethylbutyl)-N1,N2-dimethylcyclohexane-1,2-diamine ( a (R,R)-TMCDA surrogate) with i-PrLi. Computational findings were in full accord with the experimental observations. Subsequently, the theoretically provided insights into the mechanism of the reaction were exploited in computational design of a new ligand. Unfortunately, the outcome of this design was not experimentally robust and an updated approach towards a successful design was explained.