The effectiveness of literalism-symbolism in business-to-business advertising

A basic element in advertising strategy is the choice of an appeal. In business-to-business (B2B) marketing communication, a long-standing approach relies on literal and factual, benefit-laden messages. Given the highly complex, costly and involved processes of business purchases, such approaches are certainly understandable. This project challenges the traditional B2B approach and asks if an alternative approach—using symbolic messages that operate at a more intrinsic or emotional level—is effective in the B2B arena. As an alternative to literal (factual) messages, there is an emerging body of literature that asserts stronger, more enduring results can be achieved through symbolic messages (imagery or text) in an advertisement. The present study contributes to this stream of research. From a theoretical standpoint, the study explores differences in literal-symbolic message content in B2B advertisements. There has been much discussion—mainly in the consumer literature—on the ability of symbolic messages to motivate a prospect to process advertising information by necessitating more elaborate processing and comprehension. Business buyers are regarded as less receptive to indirect or implicit appeals because their purchase decisions are based on direct evidence of product superiority. It is argued here, that these same buyers may be equally influenced by advertising that stimulates internally-directed motivation, feelings and cognitions about the brand. Thus far, studies on the effect of literalism and symbolism are fragmented, and few focus on the B2B market. While there have been many studies about the effects of symbolism no adequate scale exists to measure the continuum of literalism-symbolism. Therefore, a first task for this study was to develop such a scale. Following scale development, content analysis of 748 B2B print advertisements was undertaken to investigate whether differences in literalism-symbolism led to higher advertising performance. Variations of time and industry were also measured. From a practical perspective, the results challenge the prevailing B2B practice of relying on literal messages. While definitive support was not established for the use of symbolic message content, literal messages also failed to predict advertising performance. If the ‘fact, benefit laden’ assumption within B2B advertising cannot be supported, then other approaches used in the business-to-consumer (B2C) sector, such as symbolic messages may be also appropriate in business markets. Further research will need to test the potential effects of such messages, thereby building a revised foundation that can help drive advances in B2B advertising. Finally, the study offers a contribution to the growing body of knowledge on symbolism in advertising. While the specific focus of the study relates to B2B advertising, the Literalism-Symbolism scale developed here provides a reliable measure to evaluate literal and symbolic message content in all print advertisements. The value of this scale to advance our understanding about message strategy may be significant in future consumer and business advertising research.

From text to codings: intercoder reliability assessment in qualitative content analysis

BACKGROUND: High intercoder reliability (ICR) is required in qualitative content analysis for assuring quality when more than one coder is involved in data analysis. The literature is short of standardized procedures for ICR procedures in qualitative content analysis. OBJECTIVE: To illustrate how ICR assessment can be used to improve codings in qualitative content analysis. METHODS: Key steps of the procedure are presented, drawing on data from a qualitative study on patients' perspectives on low back pain. RESULTS: First, a coding scheme was developed using a comprehensive inductive and deductive approach. Second, 10 transcripts were coded independently by two researchers, and ICR was calculated. A resulting kappa value of .67 can be regarded as satisfactory to solid. Moreover, varying agreement rates helped to identify problems in the coding scheme. Low agreement rates, for instance, indicated that respective codes were defined too broadly and would need clarification. In a third step, the results of the analysis were used to improve the coding scheme, leading to consistent and high-quality results. DISCUSSION: The quantitative approach of ICR assessment is a viable instrument for quality assurance in qualitative content analysis. Kappa values and close inspection of agreement rates help to estimate and increase quality of codings. This approach facilitates good practice in coding and enhances credibility of analysis, especially when large samples are interviewed, different coders are involved, and quantitative results are presented.

Cloud information content analysis of multi-angular measurements in the oxygen A-band: application to 3MI and MSPI

The vertical distribution of cloud cover has a significant impact on a large number of meteorological and climatic processes. Cloud top altitude and cloud geometrical thickness are then essential. Previous studies established the possibility of retrieving those parameters from multi-angular oxygen A-band measurements. Here we perform a study and comparison of the performances of future instruments. The 3MI (Multi-angle, Multi-channel and Multi-polarization Imager) instrument developed by EUMETSAT, which is an extension of the POLDER/PARASOL instrument, and MSPI (Multi-angles Spectro-Polarimetric Imager) develoloped by NASA's Jet Propulsion Laboratory will measure total and polarized light reflected by the Earth's atmosphere–surface system in several spectral bands (from UV to SWIR) and several viewing geometries. Those instruments should provide opportunities to observe the links between the cloud structures and the anisotropy of the reflected solar radiation into space. Specific algorithms will need be developed in order to take advantage of the new capabilities of this instrument. However, prior to this effort, we need to understand, through a theoretical Shannon information content analysis, the limits and advantages of these new instruments for retrieving liquid and ice cloud properties, and especially, in this study, the amount of information coming from the A-Band channel on the cloud top altitude (CTOP) and geometrical thickness (CGT). We compare the information content of 3MI A-Band in two configurations and that of MSPI. Quantitative information content estimates show that the retrieval of CTOP with a high accuracy is possible in almost all cases investigated. The retrieval of CGT seems less easy but possible for optically thick clouds above a black surface, at least when CGT > 1–2 km.

Just give me the facts? literalism versus symbolism in B2B advertising

For decades the prevailing idea in B2B marketing has been that buyers are motivated by product/service specifications. Sellers are put on approved supplier lists, invited to respond to RFPs, and are selected on the basis of superior products, at the right price, delivered on time. The history of B2B advertising is filled with the advice “provide product specifications” and your advertising will be noticed, lead to sales inquiries, and eventually result in higher sales. Advertising filled with abstractions might work in the B2C market, but the B2B marketplace is about being literal. What we know about advertising — and particularly the message component of advertising — is based on a combination of experience, unproven ideas and a bit of social science. Over the years, advertising guidelines produced by the predecessors of BMA (National Industrial Advertising Association, Association of Industrial Advertising, and the Business/Professional Advertising Association) stressed emphasizing product features and tangible benefits. The major publishers of B2B magazines, e.g., McGraw-Hill, Penton Publishing, et al. had similar recommendations. Also, B2B marketing books recommend advertising that focuses on specific product features (Kotler and Pfoertsch, 2006; Lamons, 2005). In more recent times, abstraction in advertising messages has penetrated the B2B marketplace. Even though such advertising legends as David Ogilvy (1963, 1985) frequently recommended advertising based on hard-core information, we’ve seen the growing use of emotional appeals, including humor, fear, parental affection, etc. Beyond the use of emotion, marketers attempt to build a stronger connection between their brands and buyers through the use of abstraction and symbolism. Below are two examples of B2B advertisements — Figure 1A is high in literalism and Figure 1B is high in symbolism. Which approach — a “left-brain” (literal) or “right brain” (symbolic) is more effective in B2B advertising? Are the advertising message creation guidelines from the history of B2B advertising accurate? Are the foundations of B2B message creation (experience and unproven ideas) sound?

The role of alternative message strategies in advertising performance : challenges to the B2B marketing paradigm

In this study the impact of message strategy on advertising performance will be in examined in a business-to-business (B2B) context. From a theoretical standpoint, the study will explore differences in message type between symbolic and literal approaches in B2B advertisements. While there has been much discussion on the effect of symbolism, (eg. metaphors, abstract images and figurative language), an empirically-tested scale that measures the degree of symbolism has not been developed. This research project focuses on development of a methodological scale to accurately test the difference in the direction of message appeals. Thus, insights in the role of message strategy in the B2B adoption process are anticipated with contributions in future consumer and business advertising research.

Measuring literalism and symbolism in advertisements : scale development and validation

A basic element in advertising strategy is the choice of an appeal. Many researchers have studied communication message form and specifically forms of literalism and symbolism, or some variation. The motives for such study are grounded in increasing the effectiveness of commercial communication messages, especially advertising messages. Advertising research studies typically use forms of literalism (e.g. informativeness) or symbolism (e.g. metaphoric, tropes, schemes figures of speech, and rhetorical figures) as independent variables and compare these against one or more of the traditional advertising effectiveness measures as dependent variable(s). The main challenge in assessing the effectiveness of literalism or symbolism in message content is the discreet identification of the construct. However, no standard, empirically-tested measure was located in the literature.

Business To Business (B2B) Service Processes: An Approach To Customer Complaint Process Evaluation Towards Service Excellence

Trabalho de Dissertação que identifica as decisões estratégicas relacionadas com a estrutura de gestão de serviços, no contexto de tratamento de reclamações. Os temas de recuperação de serviços e gestão de reclamações são discutidos e são listadas as melhores práticas com o objetivo de prover qualidade de serviço excelente. Este trabalho apresenta uma revisão da literatura sobre gestão de serviços e sua estratégia, e sobre valor aos clientes e sua satisfação. Qualidade de Serviço, Recuperação de Serviço e Gestão de Reclamações são revistos, também para contextualizar o processo de tratamento de reclamações de uma empresa do ramo industrial em ambiente de negócios entre empresas (business to business), cujos dados foram utilizados para construção do modelo de simulação de um processo de tratamento de reclamações. Os resultados desta simulação, junto com o suporte de um questionário sobre tratamento de reclamações, proveram pontos de reflexão e recomendações sobre desenho da estrutura de serviços e de seu desempenho, voltados para a satisfação dos clientes.

Utilização de soluções business-to-business (B2B) no segmento downstream da cadeia de suprimentos de uma distribuidora de combustíveis

The pursuit of competitive advantage is lobbying organizations to strategically plan the use of their material, human, technological and financial resources, so that it s possible to add value to the product, even when it is considered a commodity. The scenario for this planning should not be limited to the company in question, but cover an entire supply chain, which is composed of several organizations which have common goals of growth and sustainability of the market. They should form trade links, integrating the chains of individual values, in a perspective of value system. In this supply chain there is a flow of services, payments and information, as products well as. The training of these links can be supported by the adoption of a set of information technology, here called solutions business-to-business (B2B), which will be responsible for the production, storage and distribution of relevant information to business transactions between the companies involved. On this view, this thesis aims to describe the B2B solutions adopted in the downstream segment of the supply chain of a distributor of fuel and the nature of these technologies as well as their impact on the creation of value for business and optimization of the relationship between companies. This is a case study on a national distributor of fuels, from a model of research produced under the influence of theories of integrated logistics system and value of Michael Porter. The analyses came to the conclusion that information technology is perceived as an essential tool to the operation of all activities carried out by the company. Among them, at was also brought the key activities of integrated logistics: administration of applications, inventory management, management transport and customer services, which were highlighted in this study. It was also noticed that even these activities are, in principle, purely operational; they all had in the adoption of strategies for leadership in cost or differentiation, supported by B2B solutions identified, making it more conducive to business and direct customer, the clinic reseller of fuel, to obtain value and benefits of this market segment as competitive

Australian student reactions to US tourism advertising : a test of advertising as public diplomacy

A study among Australian college students gauged their reactions to a television commercial produced for the US Commerce Department to bolster sagging tourism numbers among international visitors. In additional to using traditional measures applied to tourism advertisements, the study also included items to measure attitudes toward the US government and its people. Pre- and post-viewing results indicated that although the Hollywood-movie-themes commercial was not well received by the Australian students as a tourism message, it did result in more favourable attitudes toward the US government, although not the US people. The findings lend partial support for the potential of tourism advertising efforts to exert a 'bleed-over effect' in terms of their contribution to overall attitudes toward a country, regardless of whether viewers plan to visit the country whose travel advertisements of which they see.

The role of trust in the transition from traditional to electronic B2B relationships in agri-food chains

E-business adoption rates in the agri-food sector are rather low, despite the fact that technical barriers have been mostly overcome during the last years and a large number of sophisticated offers are available. However, concerns about trust seem to impede the development of electronic relationships in the agri-food chains as trust is of particular importance in any exchange of agri-food products along the value chain. Drawing on existing research, characteristics and dimensions of trust are initially identified both in traditional and in electronic B2B relationships and a typology of trust is proposed. The aim of the paper is to provide an overview of the implementation and use of trust elements that e-commerce offers dedicated to agri-food sector. This assessment will show the current situation and discuss gaps for further improvement with the objective to facilitate the uptake of e-commerce in agri-food chains. © 2009 Elsevier B.V. All rights reserved.

Business and advertising workshop at NOW conference in Washington, D.C.

General note: Title and date provided by Bettye Lane.

Business Process Management (BPM) education in Australia : a critical review based on content analysis

Business Process Management (BPM) is a top priority in organisations and is rapidly proliferating as an emerging discipline in practice. However, the current studies show lack of appropriate BPM skilled professionals in the field and a dearth of opportunities to develop BPM expertise. This paper analyses the gap between available BPM-related education in Australia and required BPM capabilities. BPM courses offered by Australian universities and training institutions have been critically analysed and mapped against leading BPM capability frameworks to determine how well current BPM education and training offerings in Australia actually address the core capabilities required for BPM professionals. The outcomes reported here can be used by Australian universities and training institutions to better align and position their training materials to the BPM required capabilities. It could also be beneficial to individuals looking for a systematic and in-depth understanding of BPM capabilities and trainings.

Designing innovative business models with a framework that promotes experimentation

Purpose – Business models to date have remained the creation of management, however, it is the belief of the authors that designers should be critically approaching, challenging and creating new business models as part of their practice. This belief portrays a new era where business model constructs become the new design brief of the future and fuel design and innovation to work together at the strategic level of an organisation. Design/methodology/approach – The purpose of this paper is to explore and investigate business model design. The research followed a deductive structured qualitative content analysis approach utilizing a predetermined categorization matrix. The analysis of forty business cases uncovered commonalities of key strategic drivers behind these innovative business models. Findings – Five business model typologies were derived from this content analysis, from which quick prototypes of new business models can be created. Research limitations/implications – Implications from this research suggest there is no “one right” model, but rather through experimentation, the generation of many unique and diverse concepts can result in greater possibilities for future innovation and sustained competitive advantage. Originality/value – This paper builds upon the emerging research and exploration into the importance and relevance of dynamic, design-driven approaches to the creation of innovative business models. These models aim to synthesize knowledge gained from real world examples into a tangible, accessible and provoking framework that provide new prototyping templates to aid the process of business model experimentation.