On the weights of nations: assigning voting weights in a heterogenous union

Consider a voting procedure where countries, states, or districts comprising a union each elect representatives who then participate in later votes at the union level on their behalf. The countries, provinces, and states may vary in their populations and composition. If we wish to maximize the total expected utility of all agents in the union, how to weight the votes of the representatives of the different countries, states or districts at the union level? We provide a simple characterization of the efficient voting rule in terms of the weights assigned to different districts and the voting threshold (how large a qualified majority is needed to induce change versus the status quo). Next, in the context of a model of the correlation structure of agents preferences, we analyze how voting weights relate to the population size of a country. We then analyze the voting weights in Council of the European Union under the Nice Treaty and the recently proposed constitution, and contrast them under different versions of our model.

Weighted approval voting

To allow society to treat unequal alternatives distinctly we propose a natural extension of Approval Voting by relaxing the assumption of neutrality. According to this extension, every alternative receives ex-ante a non-negative and finite weight. These weights may differ across alternatives. Given the voting decisions of every individual (individuals are allowed to vote for, or approve of, as many alternatives as they wish to), society elects all alternatives for which the product of total number of votes times exogenous weight is maximal. Our main result is an axiomatic characterization of this voting procedure.

Are parties domocratizing themselves? the evolution of leardership selection in Spain (1977-2008)

The aim of this paper is to verify, for the Spanish case, whether between 1977 and 2008 has increased the internal democracy of the major political parties (PSOE, AP / PP, PCE / IU, PNV and CDC). To do this, we will focus on their leadership selection processes, one of the key elements associated with intra-party democracy. The paper is going to introduce data on four different dimensions of leadership selection: the certification process, the voting procedure, the inclusiveness of the selectorate and, finally, the degree of competitiveness. The results will show that have been few changes in the leadership selection processes of the Spanish political parties since 1977. However, the results of the Spanish case will also be used to suggest some preliminary links between the four dimensions.

Gathering support from rivals: the two rivals case

Two voters must choose between two alternatives. Voters vote in a fixed linear order. If there is not unanimity for any alternative, the procedure is repeated. At every stage, each voter prefers the same alternative to the other, has utilities decreasing with stages, and has an impatience degree representing when it is worth voting for the non-preferred alternative now rather than waiting for the next stage and voting for the preferred alternative. Intuition suggests that the more patient voter will get his preferred alternative. I found that in the unique solution of the sequential voting procedure obtained by backward induction, the first voter get his preferred alternative at the first stage independently from his impatience rate. Keywords: sequential voting, impatience rate, multi-stage voting, unanimity

Candidate Stability and Nonbinary Social Choice

A desirable property of a voting procedure is that it be immune to the strategic withdrawal of a candidate for election. Dutta, Jackson, and Le Breton (Econometrica, 2001) have established a number of theorems that demonstrate that this condition is incompatible with some other desirable properties of voting procedures. This article shows that Grether and Plott's nonbinary generalization of Arrow's Theorem can be used to provide simple proofs of two of these impossibility theorems.

About New Pattern Recognition Method for the Universal Program System “Recognition”

In this work the new pattern recognition method based on the unification of algebraic and statistical approaches is described. The main point of the method is the voting procedure upon the statistically weighted regularities, which are linear separators in two-dimensional projections of feature space. The report contains brief description of the theoretical foundations of the method, description of its software realization and the results of series of experiments proving its usefulness in practical tasks.

Parliamentary law and rules of procedure : a manual of practical information concerning deliberative bodies; motions and their purpose and relation; voting; elections; committees; officers and debate; together with model forms and reference charts; in accordance with Robert's rules of order, revised 1915 /

Mode of access: Internet.

A foundation for strategic agenda voting

We offer complete characterizations of the equilibrium outcomesof two prominent agenda voting institutions that are widely used in the democraticworld: the amendment, also known as the Anglo-American procedure,and the successive, or equivalently the Euro-Latin procedure. Our axiomaticapproach provides a proper understanding of these voting institutions, and allowscomparisons between them, and with other voting procedures.

Influence of spawning procedure on gametes fertilization success in Salminus hilarii Valenciennes, 1850 (Teleostei: Characidae): Implications for the conservation of this species

Artificial reproduction and gamete fertilization were evaluated in Salminus hilarii wild and domesticated broodstocks. Wild and domesticated broodstocks were artificially induced to reproduction using a carp pituitary treatment. Four groups were considered: Group 1 (G1), fish caught in the wild maintained for three years in the same conditions as the domesticated broodstocks and spawned naturally; Group 2 (G2), broodstock born and raised in captivity and spawned naturally; Group 3 (G3), wild broodstocks, which were manually stripped for gamete collection and dry fertilization; and Group 4 (G4), domesticated males and females, also manually stripped. Oocytes, eggs, and larvae were sampled at different time intervals throughout embryonic development. Yolk sac absorption occurred approximately 24-29 h after hatching. Twenty-six h after hatching, the larvae mouths opened. Cannibalism was identified just 28-30 h after hatching. There was no morphological difference in embryonic development among all groups. The number of released eggs per gram of female was: G1: 83.3 ± 24.5 and G2: 103.8 ± 37.4; however, the fertilization success was lower in G2 (42.0 ± 6.37 %) compared with G1 (54.7 ± 3.02%) (P = 0.011). Hand-stripping of oocytes was not successful and the fertilization rate was zero. The reproduction of this species in captivity is viable, but it is necessary to improve broodstock management to enhance fertilization rates and obtain better fingerling production for restocking programs.

An Environmental Friendly Procedure for Photometric Determination of Hypochlorite in Tap Water Employing a Miniaturized Multicommuted Flow Analysis Setup

A photometric procedure for the determination of ClO(-) in tap water employing a miniaturized multicommuted flow analysis setup and an LED-based photometer is described. The analytical procedure was implemented using leucocrystal violet (LCV; 4,4', 4 ''-methylidynetris (N, N-dimethylaniline), C(25)H(31)N(3)) as a chromogenic reagent. Solenoid micropumps employed for solutions propelling were assembled together with the photometer in order to compose a compact unit of small dimensions. After control variables optimization, the system was applied for the determination of ClO(-) in samples of tap water, and aiming accuracy assessment samples were also analyzed using an independent method. Applying the paired t-test between results obtained using both methods, no significant difference at the 95% confidence level was observed. Other useful features include low reagent consumption, 2.4 mu g of LCV per determination, a linear response ranging from 0.02 up to 2.0 mg L(-1) ClO(-), a relative standard deviation of 1.0% (n = 11) for samples containing 0.2 mg L(-1) ClO(-), a detection limit of 6.0 mu g L(-1) ClO(-), a sampling throughput of 84 determinations per hour, and a waste generation of 432 mu L per determination.

A simple procedure for reliability assessment of thin composite plates against buckling

In some circumstances ice floes may be modeled as beams. In general this modeling supposes constant thickness, which contradicts field observations. Action of currents, wind and the sequence of contacts, causes thickness to vary. Here this effect is taken into consideration on the modeling of the behavior of ice hitting inclined walls of offshore platforms. For this purpose, the boundary value problem is first equated. The set of equations so obtained is then transformed into a system of equations, that is then solved numerically. For this sake an implicit solution is developed, using a shooting method, with the accompanying Jacobian. In-plane coupling and the dependency of the boundary terms on deformation, make the problem non-linear and the development particular. Deformation and internal resultants are then computed for harmonic forms of beam profile. Forms of giving some additional generality to the problem are discussed.

Influence of temperature and excitation procedure on the athermal behavior of Nd(3+)-doped phosphate glass: Thermal lens, interferometric, and calorimetric measurements

In this work, thermal and optical properties of the commercial Q-98 neodymium-doped phosphate glass have been measured at low temperature, from 50 to 300 K. The time-resolved thermal lens spectrometry together with the optical interferometry and the thermal relaxation calorimetry methods were used to investigate the glass athermal characteristics described by the temperature coefficient of the optical path length change, ds/dT. The thermal diffusivity was also determined, and the temperature coefficients of electronic polarizability, linear thermal expansion, and refractive index were calculated and used to explain ds/dT behavior. ds/dT measured via thermal lens method was found to be zero at 225 K. The results provided a complete characterization of the thermo-optical properties of the Q-98 glass, which may be useful for those using this material for diode-pumped solid-state lasers. (C) 2009 American Institute of Physics. [doi: 10.1063/1.3234396]

A flow injection procedure based on solenoid micro-pumps for spectrophotometric determination of free glycerol in biodiesel

A flow system designed with solenoid micro-pumps is proposed for fast and greener spectrophotometric determination of free glycerol in biodiesel. Glycerol was extracted from samples without using organic solvents. The determination involves glycerol oxidation by periodate, yielding formaldehyde followed by formation of the colored (3,5-diacetil-1,4-dihidrolutidine) product upon reaction with acetylacetone. The coefficient of variation, sampling rate and detection limit were estimated as 1.5% (20.0 mg L(-1) glycerol, n =10), 34 h(-1), and 1.0 mg L(-1) (99.7% confidence level), respectively. A linear response was observed from 5 to 50 mg L(-1), with reagent consumption estimated as 345 mu g of KIO(4) and 15 mg of acetylacetone per determination. The procedure was successfully applied to the analysis of biodiesel samples and the results agreed with the batch reference method at the 95% confidence level. (C) 2010 Elsevier B.V. All rights reserved.