904 resultados para Veículos : Combustíveis : Conversão


Relevância:

100.00% 100.00%

Publicador:

Resumo:

No Brasil, a idéia original era de se utilizar o gás natural como substituto do óleo diesel para o uso na frota de veículos pesados nos centros urbanos. Esta idéia deu lugar a uma maior difusão do uso de gás natural na frota de veículos leves, em função de algumas dificuldades inerentes ao mercado do gás natural como substituto do óleo diesel, tais como a pequena diferença de preços entre o óleo diesel e o gás natural. Com a liberação do uso de gás natural para veículos a gasolina, a partir de 1992, e o crescimento de postos de abastecimento, tem-se notado um grande aumento de veículos convertidos, nas cidades onde o combustível encontra-se disponível, como Porto Alegre. Devido ao aumento de veículos convertidos, decidiu-se elaborar um trabalho que descreve os principais componentes dos “Kits” de conversão encontrados atualmente no mercado para os veículos equipados com carburador e injeção eletrônica, assim como procedimentos para a correta instalação destes componentes. Simultaneamente efetuou-se testes em veículos convertidos para o uso do gás natural, com a obtenção de curvas de potência as quais estabelecem um comparativo entre a utilização de gasolina e gás natural. Também foram feitas análises quanto a emissões de gases tóxicos dos veículos convertidos e a verificação do fator Lambda responsável pela máxima potência ao utilizar-se gás natural como combustível Sendo assim, tem-se como objetivos neste trabalho, a análise do desempenho de veículos adaptados para o uso do gás natural em relação a veículos alimentados com combustíveis líquidos, descrevendo detalhadamente os elementos necessários para a conversão de um veículo, procedimentos básicos para uma conversão eficiente e segura, e vários testes de veículos relacionando o uso do gás natural comparativamente ao uso de combustível líquido. O trabalho é concluído com a indicação dos “Kits” de conversão mais eficientes além da demonstração de algumas técnicas de regulagem baseadas nos resultados obtidos nos testes com os veículos convertidos, as quais visam a redução da perda demasiada de potência, a redução do consumo de combustível gás e a redução das emissões de gases tóxicos.

Relevância:

50.00% 50.00%

Publicador:

Resumo:

Este trabalho objetiva realizar um estudo sobre a contribuição antrópica no processo de formação de gases do efeito estufa e seus possíveis reflexos sobre as mudanças climáticas, em curso no planeta Terra. Após uma pesquisa inicial sobre as causas deste fenômeno, são identificadas as iniciativas internacionais em curso para mitigação do processo de aquecimento global, propostas pela Convenção Quadro das Nações Unidas para Mudança do Clima (CQNUMC), particularmente, em relação ao Mecanismo de Desenvolvimento Limpo (MDL) estabelecido pelo Protocolo de Kyoto. Em âmbito mundial, a contribuição de gases formadores do efeito estufa gerados nas atividades de transporte é bastante significativa ocupando o segundo lugar, atrás apenas das emissões provocadas pelas atividades industriais. Esta posição natural, somada às oportunidades existentes no território brasileiro para o uso alternativo de combustíveis oriundos de fontes renováveis e fósseis com menor nível de emissões, impulsionaram este estudo para a pesquisa das condições existentes e análise das alternativas energéticas de menor impacto ambiental Adicionalmente, foi desenvolvida uma análise da contribuição da atividade de transporte rodoviário nas emissões de gases formadores do efeito estufa (GEE), através do exemplo de um caso hipotético. Trata-se da análise comparativa dos inventários de emissões de GEE, antes e depois da conversão de motores ciclo Otto de uma frota de veículos leves, originalmente movidos à gasolina (gasool), para os combustíveis alternativos gases natural e álcool hidratado. Após análise dos resultados obtidos, em cada um dos cenários selecionados, as alternativas propostas são comparadas identificando-se a melhor opção para redução de emissões de GEE.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Questões climáticas, atmosféricas e de poluição ambiental têm tornado o uso final da energia assunto de interesse mundial. Sistemas com tração elétrica oferecem a oportunidade de redução de emissões. O mix de energia caracterizado pela matriz energética brasileira viabiliza o desenvolvimento desta tecnologia. É desenvolvida aqui uma metodologia para conversão de veículos equipados com motores a combustão interna para tração elétrica. A metodologia considera fatores como o peso e tamanho, o torque de partida, transmissão e potência, entre outros. Ferramentas matemáticas e a prática corrente fornecem a base para a elaboração deste trabalho, que descreve a análise de desempenho de veículos elétricos, os componentes utilizados, as equações mecânicas e os critérios para escolha do veículo ideal para conversão. É apresentada a execução de um projeto de conversão de uma Kombi para tração elétrica, cujo objetivo tem caráter educativo, buscando assim promover os benefícios da tecnologia veicular elétrica. Para viabilização do experimento, o trabalho conclui que é necessário ampliar a demanda por nacionalização de tecnologia, o que tornaria o projeto uma realidade comercialmente viável. Além disto, há necessidade de políticas públicas para o incentivo da tecnologia veicular elétrica no Brasil. Este trabalho apresenta uma contribuição para converter veículos para tração elétrica, visto que sistematiza as etapas de projeto, a partir das quais outros poderão seguir, utilizando componentes encontrados no mercado nacional.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Trabalho final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica Ramo Manutenção e Produção

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Devido às normas ambientais atualmente em vigor que restringem a quantidade de gases poluentes emitidos para a atmosfera pelos automóveis, e também pela cada vez maior consciencialização para os problemas ambientais que o consumo de combustíveis fósseis acarreta, assim como devido ao cada vez mais elevado preço dos mesmos, os construtores automóveis têm como principal objectivo a redução do consumo do combustível e consequente diminuição de emissão de poluentes. Os sistemas de reaproveitamento da energia térmica desperdiçada nos motores de combustão interna (MCI), podem contribuir de forma significativa para o aumento da eficiência de conversão de energia em veículos equipados com MCI. O presente estudo é dedicado ao desenvolvimento de um sistema de recupereração desta energia desperdiçada, recorrendo ao ciclo de Rankine, com ênfase no desenvolvimento da montagem experimental, na avaliação do desempenho de diferentes geometrias de evaporador e no estudo das incertezas experimentais. Tendo em conta as várias restrições de projeto (compacidade, perda de carga e potência recuperada por unidade de volume) o presente trabalho permitiu identificar a geometria do evaporador mais adequada.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

As correntes pesadas do refino de petróleo podem ser utilizadas para a produção de óleos combustíveis para uso industrial ou marítimo, sendo esse último conhecido como óleo bunker. Para tal, é necessária a diluição dessas correntes pesadas com frações de refino mais leves para ajuste da viscosidade. Enquanto o uso industrial do óleo combustível vem sendo significativamente reduzido em função de restrições ambientais, o mercado de óleo bunker apresenta crescimento importante face a expansão do comércio marítimo mundial. No Brasil, há um aumento da produção de petróleos pesados, extrapesados e asfálticos, que exigem complexos esquemas de refino para a sua conversão em frações mais leves. Dessa forma, ocorre uma redução da quantidade de correntes disponíveis para a produção de bunker, além da variação da qualidade das correntes usadas na sua formulação. Esta dissertação avalia a utilização de petróleos pesados e asfálticos na produção de bunker, sem a necessidade do processamento tradicional em refinarias de petróleo. A comparação da qualidade de ignição e de combustão da nova formulação deste produto com o combustível marítimo preparado a partir de correntes residuais é realizada por duas metodologias diferentes. Após a realização de um pré-tratamento, a mistura formulada a partir dos cortes dos petróleos apresenta melhor desempenho que os combustíveis formulados com as correntes residuais. Além disso, este trabalho compara o efeito de diferentes diluentes e a contribuição da corrente pesada utilizada na qualidade de ignição e de combustão do produto

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Com o aumento da população mundial registado nos últimos anos surgiu também uma maior procura energética. Esse aumento foi inicialmente colmatado recorrendo essencialmente a fontes de origem fóssil, pelo facto destas serem mais baratas. No entanto, essa tendência de preços baixos sofreu o primeiro abalo nos anos 70 do século passado, altura em que o preço do petróleo disparou, devido a questões políticas. Nessa altura ficou visível para os países ocidentais o quanto estes eram dependentes dos países produtores de petróleo que, em geral, são instáveis politicamente. Começou então a procura de fontes energéticas alternativas. Além da questão económica do aumento do preço dos combustíveis, existe também o problema ambiental. Os maiores responsáveis pela emissão de gases efeito estufa (GEE) são os combustíveis fósseis. Os GEE contribuem para o aquecimento global, o que origina fenómenos ambientais severos que poderão levar a mudanças climáticas significativas. As energias renováveis apresentam-se como a solução mais viável ao problema energético e ambiental que se verifica actualmente, porque permitem colmatar o aumento da procura energética de uma forma limpa e sustentável. Na sequência destes problemas surgiram nos últimos anos veículos que permitem reduzir ou mesmo eliminar o consumo de combustíveis fósseis, como os veículos híbridos eléctricos, eléctricos e a hidrogénio. Nesta dissertação analisa-se um sistema que foi pensado para ser implementado em áreas de serviço, que permite efectuar o carregamento de electric vehicles (EV) utilizando energia eléctrica de origem fotovoltaica e a produção de hidrogénio para os fuels cell electric vehicles (FCEV). É efectuada uma análise económica do sistema, uma análise ambiental e analisou-se também o impacto na redução da dependência do país em relação ao exterior, sendo ainda efectuada uma pequena análise ao sistema MOBIE. No caso dos veículos a hidrogénio, foi determinada qual seria a melhor opção em termos económicos, para a produção de hidrogénio considerando três regimes de produção: recorrendo apenas à energia eléctrica proveniente do sistema fotovoltaico, apenas à energia eléctrica da rede, ou uma combinação dos dois regimes. O sistema estudado nesta dissertação apresenta um enorme potencial a nível energético e ambiental, surgindo como alternativa para abastecer os veículos que irão permitir, no futuro, eliminar a dependência energética em relação às fontes fósseis e ao mesmo tempo diminuir a quantidade de gases efeito estufa emitidos para a atmosfera.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The use of Natural Gas Vehicle has had a fast increase lately. However, in order to have a continuous success this Program needs to develop converting devices of Otto-cycle engines, gasoline or alcohol, to the use of NGV (Natural Gas Vehicle) that presents low cost, maintaining the same original development of the vehicle and low level of emissions, considering the PROCONVE rules. Due to the need to diversify the matrix in order to avoid energetic dependence and due to strict pollution control, it has increased in the Brazilian market the number of vehicles converted to the use of NGV. The recent regulation of the PROCONVE, determining that the converted engines with kits should be submitted to emission testing, comes to reinforce the necessity of the proposed development. Therefore, if we can obtain kits with the characteristics already described, we can reach a major trust in the market and obtain an increase acceptance of the vehicle conversion for NGV. The use of natural gas as vehicle fuel presents several advantages in relation to liquid fuels. It is a vehicle fuel with fewer indexes of emissions when compared to diesel; their combustion gases are less harmful, with a major level of safety than liquid fuels and the market price is quite competitive. The preoccupation that emerges, and the motivation of this project, is to know which are the main justifications for such technology, well accepted in other countries, with a low index or emission, with a high level of safety, where its maintenance becomes low, reminding that for this it is necessary that this technology has to be used properly, and once available in the market will not motivate interest in the urban transportation companies in Brazil, in research centers in general. Therefore this project exists to show the society in a general way the current vision of the main governmental factors, of the national research centers and of the private companies concerning the use of natural gas vehicles in urban transport vehicles, in order to give a major reliability to the population as well as to motivate national market competitiveness with a low cost and reliable product and to enrich the national technology

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The vehicles are the main mobile sources of carbon monoxide (CO) and unburned hydrocarbons (HC) released into the atmosphere. In the last years the increment of the fleet of vehicles in the municipal district of Natal-RN it is contributing to the increase of the emissions of those pollutants. The study consisted of a statistical analysis of the emissions of CO and HC of a composed sample for 384 vehicles with mechanization Gasoline/CNG or Alcohol/Gasoline/CNG of the municipal district of Natal-RN. The tests were accomplished in vehicles submitted to Vehicular Safety's Inspection, in the facilities of INSPETRANS, Organism of Vehicular Inspection. An partial gases analyzer allowed to measure, for each vehicle, the levels of CO and HC in two conditions of rotation of the motor (900 and 2500 rpm). The statistical analysis accomplished through the STATISTICA software revealed a sensitive reduction in the efficiency of the converters catalytic after 6 years of use with emission average it is of 0,78% of CO and 156 (ppm) of HC, Which represents approximately 4 (four) times the amount of CO and the double of HC in comparison with the newest vehicles. The result of a Student s t-test, suggests strongly that the average of the emissions of HC (152 ppm), at 900 rpm, is 40% larger than at 2500 rpm, for the motor without load. This result reveals that the efficiency of the catalytic conversion is limited kinetically in low engine speeds. The Study also ends that when comparing the emissions of CO and HC considering the influence of the fuels, it was verified that although the emissions of CO starting from CNG are 62% smaller than arising from the gasoline, there are not significant differences among the emissions of HC originating from of CNG and of the gasoline. In synthesis, the results place the current criteria of vehicular inspection, for exhaust gases, in doubt, leading the creation of emission limits of pollutant more rigorous, because the efficiency of the converters catalytic is sensibly reduced starting from 6 years of use. It is also raised the possibility of modifications in the test conditions adopted by the current norms, specifically in the speed engine, have seen that in the condition without load the largest emission indexes were registered in slow march. That fact that allows to suggest the dismissal of the tests in high speed engine, reducing the time of inspection in half and generating economy of fuel

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The fast urban occupation of Brazil, mainly from the last decade of 50, a sensible degradation of the quality of the air generated mainly for the activities was verified human beings associates to industrialization. From the past years, the situation has gotten worst in function of the increment of the fleet of vehicles in circulation in the great cities. Being these, in the city of Natal-RN, the ones that offer the biggest contributions to the atmospheric pollution. For atmospheric air to be a finite natural resources, indispensable and essential to the maintenance of the life in the land, is necessary to the implementation of action to improve its quality and to protect the health of the population. With the objective to study relative aspects to the characteristics of vehicles in use, the present study it searchs to analyze the levels of emissions of gases generated for vehicles converted bi-fuels into the modalities: natural gas (GNV), gasoline and alcohol, inspected for ends of register and together licensing to the State Department of Transit. One used the data gotten from inspections carried through for the company System Specialized in Inspection To propagate, in the city of the Natal-RN, capital of the State of Rio Grande do Norte, between 14 of November of 2003 and 30 of December of 2004. The analyzed parameters are established in the resolution nº 07/93 CONAMA. Of a total of 1.517 inspected vehicles, a average of 15,2% of failed was gotten, or either, that they emit levels of pollution above of the limits established for the legislation, below of the national average that is of 20,0%. The analysis of the data discloses that 7.3% of the fleet are converted the GNV; the growth of vehicles converted the GNV into the city is gradual, with a average of increment in last the 4 years of 23,3%; it has a vehicle predominance that has as combustible original to the gasoline (88,2%); the inspected fleet has average age of 8 years of use, considered young for the Brazilian standards, except for the moved one to the alcohol (average of use of 15 years). Moreover, the type of fuel is not the main parameter to define the indices of emissions; the age of the fleet is the parameter most important when emission is analyzed to propagate; the gas that more generates failed in the inspections is the corrected carbon monoxide; the vehicles generate higher indices of emissions in idling for all the fuels; the presence of the catalyser was not reflected, as it expected, in the reduction of emissions of gases toxic, however when analyzed according to year of manufacture, it was observed that for the vehicles manufactured between 1997 and 2004, reduction of 46,0% in the failed of the vehicles equipped with catalyser was gotten. In conclusion, the fleet of the studied sample, in average terms, takes care of to the requirements of Resolution CONAMA nº 07/93. The results gotten for the present study can subsidize action of public administrations that aim at to the improvement and the maintenance of the quality of air in the city of Natal-RN, as, for example, to implant a net of monitoramento of the quality of air

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This work presents the analysis of data collected by Universidade Federal do Rio Grande do Norte and State Public Prosecution Office experts concerning to current situation of liquid fuel resale stations, its forms of storage and its technical apparatus for the performance of primary functions (supply of vehicles) and secondary (car washing, storage of used oil, oil change etc.). The data presented were analyzed in the setting of the city of Natal (RN) and considering its characteristics, potentialities and weaknesses. Thereafter, it was discussed liquid fuels resale pollution potential in the city and legal provisions directed to implementation of Green Seal. The discussion involves three agents: environmental, legal and technical ones, applied to all 110 resale fuel stations which were analyzed

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Currently there are two car models that use electricity in their propulsion systems, the electric vehicle and the hybrid electric vehicle. The electric vehicles are classified as vehicles that use electric motors in their propulsion system and batteries as a power source, on the other hand, the hybrid vehicles are classified as vehicles that use both electric motors and internal combustion engines in their propulsion system, using both batteries and líquid fuels as a power source. The main goal of this work is to analyze the characteristics of electric and hybrid electric vehicles and demonstrate the unfeasibility of the electric vehicle in the current economic, political, energetic and environmental brazilian scenario, for this purpose it was realized a study about the current brazilian situation regarding to electricity generation, current conservation status of road network, lack of electrical infrastructure for charging batteries, national lithium reserves, environmental characteristics, tax incentives, economic scenario, oil market and political positioning related to the implantation of electric or hybrid electric fleets in nacional territory. The operational characteristics analysis of electric and hybrid electric vehicles in this current scenario leads to the conclusion that currently a growth of electric vehicles fleets on a national scale is totally impractical in the Brazil, Thus, the introduction of green vehicles probably will occur primarily with hybrid electric models, motivated mainly due the bigger autonomy of this models compared to electric models, lower cost of hybrid electric models compared to electric models, factors related to the lack of recharging infrastructure and also factors related to political positioning