Personalização e previsibilidade do sorriso digital smile design

A estética é algo que interfere no bem-estar das pessoas e o sorriso não é excepção, sendo até considerado um factor estético essencial nos dias de hoje, perante uma sociedade cada vez mais exigente relativamente aos padrões de beleza. A área da estética dentária, encontra-se em constantes mudanças devido à evolução da qualidade dos materiais e das técnicas utilizadas, levando a melhorias na reprodução das características naturais dos dentes. O médico dentista tem a responsabilidade de adquirir conhecimento e habilidades profissionais para a elaboração de tratamentos estéticos dentários que satisfaçam as expectativas dos pacientes quanto ao seu sorriso. Actualmente, o médico dentista possui várias opções para planear os tratamentos, entre as quais, o planeamento digital através do Digital Smile Design. O Digital Smile Design (DSD), criado pelo Doutor Christian Coachman, veio responder à procura elevada por tratamentos cada vez mais personalizados por parte dos pacientes. O DSD amplia a visão relativamente aos diagnósticos, melhora a comunicação entre as diferentes especialidades na área da medicina dentária e cria planos previsíveis durante o tratamento dentário. Trata-se de um programma onde são trabalhadas imagens fotográficas do paciente para a elaboração de um tratamento estético que responda as necessidades biológicas, funcionais e emocionais do paciente. Este poderá acompanhar e visualizar todos os passos do tratamento e deste modo, torna-se parte integrante do processo. O paciente expressa a sua opinião e as suas expectativas quanto ao resultado final. Neste trabalho realizou-se uma revisão narrativa da literatura sobre a técnica Digital Smile Design utilizando as palavras-chaves: Digital Smile Design; Visagism; dental planning; meaning of smile; mock-up. Os objetivos deste trabalho foi o de conhecer a técnica Digital Smile Design, os princípios do visagismo e a importância do planeamento nestes contextos. O sucesso de um tratamento está dependente de um correcto planeamento e de uma execução clínica e laboratorial cuidadosa.

Importância do enceramento de diagnóstico no plano de tratamento

Objetivos: Esta revisão bibliográfica foi elaborada com o intuito de clarificar os objetivos e aplicações do enceramento diagnóstico, nomeadamente na estética do sorriso; mencionar os fatores estéticos do sorriso bem como os princípios de design do mesmo, como objetivo a incluir no enceramento de diagnóstico e a atingir no resultado final do tratamento; abordar o conceito de planeamento digital do sorriso e abordar a importância da comunicação do médico-dentista/técnico de prótese/paciente e discutir os contributos que o enceramento diagnóstico pode aportar para esta relação entre profissionais e paciente. Material e métodos: Para a realização desta monografia, a fundamentação teórica baseou-se em 15 artigos científicos, publicados nas bases de dados PubMed, Scielo, Science Direct e B-on, com limite temporal entre 1998-2016, obtidos através das seguintes palavras-chave: “diagnostic wax-up”, “enceramento diagnóstico”, “esthetic smile design”, “smile design”, “esthetic dentistry”, “macroesthetic AND smile”, “patient-dentist communication”, “wax-up AND mock-up”, “treatment plan AND diagnostic wax-up”. A pesquisa bibliográfica foi ainda complementada com informações de alguns artigos de autores que foram mencionados nos artigos conseguidos, dada a dificuldade de acesso a alguns. Resultados/Conclusões: Em termos gerais, pode concluir-se através desta revisão de literatura que o enceramento de diagnóstico é essencial no plano de tratamento, porque aumenta a probabilidade da sua aceitação. É também um meio de obtenção de uma comunicação médico dentista/técnico de laboratório/paciente mais clara, precisa e eficaz. O paciente deve envolver-se desde cedo no seu plano de tratamento, dando o seu contributo através da transmissão dos seus desejos e necessidades. O enceramento de diagnóstico possui inúmeras aplicações na medicina dentária, sendo crucial para o design do sorriso. O design do sorriso envolve diversos parâmetros e encontra-se dividido em diferentes áreas (estética facial, estética periodontal e estética dentária), contendo nessas mesmas áreas conceitos variados a ter em conta. A estética do sorriso depende da interação de todas as áreas que envolvem o design do sorriso.

Design, Synthesis And Biological Evaluation Of Hybrid Bioisoster Derivatives Of N-acylhydrazone And Furoxan Groups With Potential And Selective Anti-trypanosoma Cruzi Activity.

Hybrid bioisoster derivatives from N-acylhydrazones and furoxan groups were designed with the objective of obtaining at least a dual mechanism of action: cruzain inhibition and nitric oxide (NO) releasing activity. Fifteen designed compounds were synthesized varying the substitution in N-acylhydrazone and in furoxan group as well. They had its anti-Trypanosoma cruzi activity in amastigotes forms, NO releasing potential and inhibitory cruzain activity evaluated. The two most active compounds (6, 14) both in the parasite amastigotes and in the enzyme contain the nitro group in para position of the aromatic ring. The permeability screening in Caco-2 cell and cytotoxicity assay in human cells were performed for those most active compounds and both showed to be less cytotoxic than the reference drug, benznidazole. Compound 6 was the most promising, since besides activity it showed good permeability and selectivity index, higher than the reference drug. Thereby the compound 6 was considered as a possible candidate for additional studies.

Study Of The Homogeneity Of Drug Loaded In Polymeric Films Using Near-infrared Chemical Imaging And Split-plot Design.

Split-plot design (SPD) and near-infrared chemical imaging were used to study the homogeneity of the drug paracetamol loaded in films and prepared from mixtures of the biocompatible polymers hydroxypropyl methylcellulose, polyvinylpyrrolidone, and polyethyleneglycol. The study was split into two parts: a partial least-squares (PLS) model was developed for a pixel-to-pixel quantification of the drug loaded into films. Afterwards, a SPD was developed to study the influence of the polymeric composition of films and the two process conditions related to their preparation (percentage of the drug in the formulations and curing temperature) on the homogeneity of the drug dispersed in the polymeric matrix. Chemical images of each formulation of the SPD were obtained by pixel-to-pixel predictions of the drug using the PLS model of the first part, and macropixel analyses were performed for each image to obtain the y-responses (homogeneity parameter). The design was modeled using PLS regression, allowing only the most relevant factors to remain in the final model. The interpretation of the SPD was enhanced by utilizing the orthogonal PLS algorithm, where the y-orthogonal variations in the design were separated from the y-correlated variation.

Perception Of Oral And Maxillofacial Surgeons, Orthodontists And Laypersons In Relation To The Harmony Of The Smile.

Harmony is one of the main objectives in surgical and orthodontic treatment and this harmony must be present in the smile, as well as in the face. The aim of the present study was to assess the perceptions of professionals and laypersons in relation to the harmony of the smile of patients with or without vertical maxillary alterations. Sixty observers (oral and maxillofacial surgeons, orthodontists and laypersons) reported the degree of harmony of six smiles using an objective questionnaire and the participants indicated if there was a need for corrective surgery or not. The classification of observers was recorded on a Likert scale from 1 to 5. Mixed regression was used to determine differences between the three groups. Statistically significant differences were found only for the harmony of the smile between the oral and maxillofacial surgeons and laypersons, with laypersons being more critical when assessing the smile. There was no statistical difference between the other groups for the harmony of the smile or the indication of corrective surgery. The patterns of greater or lesser harmony determined by observers during the smile were similar to those found in the literature as the ideal standard in relation to vertical maxillary positioning. Laypersons had a tendency to be more critical in relation to facial harmony than surgeons, although no statistical differences were found in the other groups in relation to the harmony of the smile or indication for the corrective surgery. In addition, the patterns of greater or lesser harmony of the smile determined by the participants were similar to those found in the literature as the ideal standard in relation to vertical maxillary positioning. Overall, the present study demonstrates that adequate interaction between surgeons, orthodontists and laypersons is essential in order to achieve facial harmony with orthodontic and/or surgical treatment. Opinion of specialists and laypersons about the smile in relation to the vertical positioning of the maxilla.

Doehlert Design-desirability Function Multi-criteria Optimal Separation Of 17 Phenolic Compounds From Extra-virgin Olive Oil By Capillary Zone Electrophoresis.

In Brazil, the consumption of extra-virgin olive oil (EVOO) is increasing annually, but there are no experimental studies concerning the phenolic compound contents of commercial EVOO. The aim of this work was to optimise the separation of 17 phenolic compounds already detected in EVOO. A Doehlert matrix experimental design was used, evaluating the effects of pH and electrolyte concentration. Resolution, runtime and migration time relative standard deviation values were evaluated. Derringer's desirability function was used to simultaneously optimise all 37 responses. The 17 peaks were separated in 19min using a fused-silica capillary (50μm internal diameter, 72cm of effective length) with an extended light path and 101.3mmolL(-1) of boric acid electrolyte (pH 9.15, 30kV). The method was validated and applied to 15 EVOO samples found in Brazilian supermarkets.

Design And Synthesis Of N-acylated Aza-goniothalamin Derivatives And Evaluation Of Their In Vitro And In Vivo Antitumor Activity.

Herein we describe the synthesis of a focused library of compounds based on the structure of goniothalamin (1) and the evaluation of the potential antitumor activity of the compounds. N-Acylation of aza-goniothalamin (2) restored the in vitro antiproliferative activity of this family of compounds. 1-(E)-But-2-enoyl-6-styryl-5,6-dihydropyridin-2(1H)-one (18) displayed enhanced antiproliferative activity. Both goniothalamin (1) and derivative 18 led to reactive oxygen species generation in PC-3 cells, which was probably a signal for caspase-dependent apoptosis. Treatment with derivative 18 promoted Annexin V/7-aminoactinomycin D double staining, which indicated apoptosis, and also led to G2 /M cell-cycle arrest. In vivo studies in Ehrlich ascitic and solid tumor models confirmed the antitumor activity of goniothalamin (1), without signs of toxicity. However, derivative 18 exhibited an unexpectedly lower in vivo antitumor activity, despite the treatments being administered at the same site of inoculation. Contrary to its in vitro profile, aza-goniothalamin (2) inhibited Ehrlich tumor growth, both on the ascitic and solid forms. Our findings highlight the importance of in vivo studies in the search for new candidates for cancer treatment.

Use Of Experimental Design To Optimize A Triple-potential Waveform To Develop A Method For The Determination Of Streptomycin And Dihydrostreptomycin In Pharmaceutical Veterinary Dosage Forms By Hplc-pad.

An HPLC-PAD method using a gold working electrode and a triple-potential waveform was developed for the simultaneous determination of streptomycin and dihydrostreptomycin in veterinary drugs. Glucose was used as the internal standard, and the triple-potential waveform was optimized using a factorial and a central composite design. The optimum potentials were as follows: amperometric detection, E1=-0.15V; cleaning potential, E2=+0.85V; and reactivation of the electrode surface, E3=-0.65V. For the separation of the aminoglycosides and the internal standard of glucose, a CarboPac™ PA1 anion exchange column was used together with a mobile phase consisting of a 0.070 mol L(-1) sodium hydroxide solution in the isocratic elution mode with a flow rate of 0.8 mL min(-1). The method was validated and applied to the determination of streptomycin and dihydrostreptomycin in veterinary formulations (injection, suspension and ointment) without any previous sample pretreatment, except for the ointments, for which a liquid-liquid extraction was required before HPLC-PAD analysis. The method showed adequate selectivity, with an accuracy of 98-107% and a precision of less than 3.9%.

Effectiveness of a new toothbrush design versus a conventional tongue scraper in improving breath odor and reducing tongue microbiota

For centuries, specific instruments or regular toothbrushes have routinely been used to remove tongue biofilm and improve breath odor. Toothbrushes with a tongue scraper on the back of their head have recently been introduced to the market. The present study compared the effectiveness of a manual toothbrush with this new design, i.e., possessing a tongue scraper, and a commercial tongue scraper in improving breath odor and reducing the aerobic and anaerobic microbiota of tongue surface. The evaluations occurred at 4 moments, when the participants (n=30) had their halitosis quantified with a halimeter and scored according to a 4-point scoring system corresponding to different levels of intensity. Saliva was collected for counts of aerobic and anaerobic microorganisms. Data were analyzed statistically by Friedman's test (p<0.05). When differences were detected, the Wilcoxon test adjusted for Bonferroni correction was used for multiple comparisons (group to group). The results confirmed the importance of mechanical cleaning of the tongue, since this procedure provided an improvement in halitosis and reduction of aerobe and anaerobe counts. Regarding the evaluated methods, the toothbrush's tongue scraper and conventional tongue scraper had a similar performance in terms of breath improvement and reduction of tongue microbiota, and may be indicated as effective methods for tongue cleaning.

Influence of specimens' design and manufacturing process on microtensile bond strength to enamel: laboratory and FEA comparison

This study evaluated the effect of specimens' design and manufacturing process on microtensile bond strength, internal stress distributions (Finite Element Analysis - FEA) and specimens' integrity by means of Scanning Electron Microscopy (SEM) and Laser Scanning Confocal Microscopy (LCM). Excite was applied to flat enamel surface and a resin composite build-ups were made incrementally with 1-mm increments of Tetric Ceram. Teeth were cut using a diamond disc or a diamond wire, obtaining 0.8 mm² stick-shaped specimens, or were shaped with a Micro Specimen Former, obtaining dumbbell-shaped specimens (n = 10). Samples were randomly selected for SEM and LCM analysis. Remaining samples underwent microtensile test, and results were analyzed with ANOVA and Tukey test. FEA dumbbell-shaped model resulted in a more homogeneous stress distribution. Nonetheless, they failed under lower bond strengths (21.83 ± 5.44 MPa)c than stick-shaped specimens (sectioned with wire: 42.93 ± 4.77 MPaª; sectioned with disc: 36.62 ± 3.63 MPa b), due to geometric irregularities related to manufacturing process, as noted in microscopic analyzes. It could be concluded that stick-shaped, nontrimmed specimens, sectioned with diamond wire, are preferred for enamel specimens as they can be prepared in a less destructive, easier, and more precise way.

Design, construction and evaluation of a simple pressurized solvent extraction system

This work describes the construction and testing of a simple pressurized solvent extraction (PSE) system. A mixture of acetone:water (80:20), 80 ºC and 103.5 bar, was used to extract two herbicides (Diuron and Bromacil) from a sample of polluted soil, followed by identification and quantification by high-performance liquid chromatography coupled with diode array detector (HPLC-DAD). The system was also used to extract soybean oil (70 ºC and 69 bar) using pentane. The extracted oil was weighed and characterized through the fatty acid methyl ester analysis (myristic (< 0.3%), palmitic (16.3%), stearic (2.8%), oleic (24.5%), linoleic (46.3%), linolenic (9.6%), araquidic (0.3%), gadoleic (< 0.3%), and behenic (0.3%) acids) using high-resolution gas chromatography with flame ionization detection (HRGC-FID). PSE results were compared with those obtained using classical procedures: Soxhlet extraction for the soybean oil and solid-liquid extraction followed by solid-phase extraction (SLE-SPE) for the herbicides. The results showed: 21.25 ± 0.36% (m/m) of oil in the soybeans using the PSE system and 21.55 ± 0.65% (m/m) using the soxhlet extraction system; extraction efficiency (recovery) of herbicides Diuron and Bromacil of 88.7 ± 4.5% and 106.6 ± 8.1%, respectively, using the PSE system, and 96.8 ± 1.0% and 94.2 ± 3.9%, respectively, with the SLP-SPE system; limit of detection (LOD) and limit of quantification (LOQ) for Diuron of 0.012 mg kg-1 and 0.040 mg kg-1, respectively; LOD and LOQ for Bromacil of 0.025 mg kg-1 and 0.083 mg kg-1, respectively. The linearity used ranged from 0.04 to 1.50 mg L-1 for Diuron and from 0.08 to 1.50 mg L-1 for Bromacil. In conclusion, using the PSE system, due to high pressure and temperature, it is possible to make efficient, fast extractions with reduced solvent consumption in an inert atmosphere, which prevents sample and analyte decomposition.

Características clínico-epidemiológicas da doença Lyme-símile em crianças

OBJETIVO: Determinar a prevalência, distribuição etária, sazonalidade, características clínicas da doença Lyme-símile em menores de 15 anos. MÉTODOS: De julho/1998 a dezembro/2000 foi conduzido um estudo transversal em 333 pacientes, com exantema e febre. Foram coletadas amostras pareadas de sangue para a identificação de patógenos. Somente em 193 amostras, negativas aos outros patógenos (Parvovirus B19, Herpesvírus 6 humano, Sarampo, Rubéola, Dengue, Escarlatina e Enterovírus), foram realizadas a pesquisa da borreliose pelos métodos de Enzyme-Linked Immunosorbent Assay e Western-blotting. Outras variáveis clínicas, socioeconômicas, demográficas e climáticas foram estudadas. RESULTADOS: A prevalência da doença foi de 6,2%(12/193). Das variáveis estudadas, houve predomínio em <6anos(83,2%); sexo feminino (66,7%); procedência da cidade de Franco da Rocha (58,3%); com sazonalidade no outono-verão. O intervalo de atendimento foi de quatro dias. Sinais e sintomas com significância estatística: prurido, ausência da fissura labial e bom estado clínico. Outros dados presentes foram: irritabilidade (80%); febre (?38ºC) (58,3%) com duração de um a três dias. O exantema foi do tipo máculo-papular (33,3%), urticariforme (25%) e escarlatiniforme (16,7%); predominando em tronco (60%). Não houve apresentação clínica característica para diagnóstico da doença de Lyme-símile nestes pacientes. A sensibilidade e especificidade para o diagnóstico clínico contraposta com o diagnóstico laboratorial foi zero. O acompanhamento de 10 casos durante dois anos não evidenciou complicações cardiológicas ou neurológicas. Este é o primeiro estudo desta doença em crianças brasileiras. CONCLUSÃO: A prevalência da doença Lyme-símile foi baixa, não tendo sido lembrada no diagnóstico inicial dos exantemas, mas seu conhecimento é necessário, necessitando maior atenção médica.

Design and characterization of bridged loop-gap resonators for use in electron paramagnetic resonance measurements

This paper revisits the design of L and S band bridged loop-gap resonators (BLGRs) for electron paramagnetic resonance applications. A novel configuration is described and extensively characterized for resonance frequency and quality factor as a function of the geometrical parameters of the device. The obtained experimental results indicate higher values of the quality factor (Q) than previously reported in the literature, and the experimental analysis data should provide useful guidelines for BLGR design.

Design methodology for multi-pumped discrete Raman amplifiers: case-study employing photonic crystal fibers

This paper proposes a new design methodology for discrete multi-pumped Raman amplifier. In a multi-objective optimization scenario, in a first step the whole solution-space is inspected by a CW analytical formulation. Then, the most promising solutions are fully investigated by a rigorous numerical treatment and the Raman amplification performance is thus determined by the combination of analytical and numerical approaches. As an application of our methodology we designed an photonic crystal fiber Raman amplifier configuration which provides low ripple, high gain, clear eye opening and a low power penalty. The amplifier configuration also enables to fully compensate the dispersion introduced by a 70-km singlemode fiber in a 10 Gbit/s system. We have successfully obtained a configuration with 8.5 dB average gain over the C-band and 0.71 dB ripple with almost zero eye-penalty using only two pump lasers with relatively low pump power. (C) 2009 Optical Society of America