Prevalencia de síntomas osteomusculares en miembros superiores en trabajadores de una fábrica de calzado.

Los desórdenes musculo esqueléticos (DME) son entidades comunes y potencialmente discapacitantes, pero aun así prevenibles que comprenden un amplio número de entidades clínicas específicas (1); se pueden presentar durante la jornada laboral y en muchas ocasiones no son detectados en los exámenes ocupacionales. Se calculó la prevalencia de síntomas osteomusculares de miembro superior en una fábrica de calzado.

Estigma no uso do calçado ortopédico : um estudo de caso em ambiente empresarial

A presente dissertação analisa o calçado ortopédico sob as diferentes dimensões do produto. O estudo tem principal enfoque no estigma durante o uso do calçado ortopédico, tendo sido realizada em ambiente empresarial, designadamente na fábrica de calçado ortopédico Nimco Made4you. Colocase a questão: Como pode o design contribuir para a minimização do estigma no uso do calçado ortopédico? Produzir calçado portador de dimensão simbólica dos produtos de modo informado e consciente, é admitir que os portadores de deficiências físicas podem construir representações simbólicas minimizadoras do estigma, recorrendo a valores estéticos e sociais contemporâneos. O presente trabalho pretende contribuir para a descontrução do estigma no uso destes produtos numa perpectiva de design social, isto é, o design para todos. O trabalho é composto por uma introdução explicativa da problemática e sua relevância, estudo de mercado baseado numa análise de concorrência através de cronologias com análises comparativas e desenvolvimento de exercícios de design na procura de um caminho solucionário para a problemática. A dissertação termina com um capítulo conclusivo sobre a resposta dada e necessidades futuras para alcance da melhor solução possível. O contexto empresarial em que se desenvolve a dissertação na empresa Nimco Made4you, contribui fortemente para o entendimento da complexidade do problema, bem como na qualidade de respostas dadas ao mesmo. Se por um lado esta dissertação constitui um desenvolvimento de produtos que compreende uma dimensão simbólica no contexto particular em que se enquadram, por outro lado constitui também uma integração de competências de design a operar a partir de dentro da empresa.

Women, workplace militancy and political subjectivity in Britain, 1968-1985

This thesis examines the experiences and political subjectivity of women who engaged in workplace protest in Britain between 1968 and 1985. The study covers a period that has been identified with the ‘zenith’ of trade-union militancy in British labour history. The women’s liberation movement also emerged in this period, which produced a shift in public debates about gender roles and relations in the home and the workplace. Women’s trade union membership increased dramatically and trade unions increasingly committed themselves to supporting ‘women’s issues’. Industrial disputes involving working-class women have frequently been cited as evidence of women’s growing participation in the labour movement. However, the voices and experiences of female workers who engaged in workplace protest remain largely unexplored. This thesis addresses this space through an original analysis of the 1968 sewing-machinists’ strike at Ford, Dagenham; the 1976 equal pay strike at Trico, Brentford; the 1972 Sexton shoe factory occupation in Fakenham, Norfolk; the 1981 Lee Jeans factory occupation in Greenock, Inverclyde and the 1984-1985 sewing-machinists’ strike at Ford Dagenham. Drawing upon a combination of oral history and written sources, this study contributes a fresh understanding of the relationship between feminism, workplace activism and trade unionism during the years 1968-1985. In every dispute considered in this thesis, women’s behaviour was perceived by observers as novel, ‘historic’ or extraordinary. But the women did not think of themselves as extraordinary, and rather understood their behaviour as a legitimate and justified response to their everyday experiences of gender and class antagonism. The industrial disputes analysed in this thesis show that women’s workplace militancy was not simply a direct response to women’s heightened presence in trade unions. The women involved in these disputes were more likely to understand their experiences of workplace activism as an expression of the economic, social and subjective value of their work. Whilst they did not adopt a feminist identity or associate their action with the WLM, they spoke about themselves and their motivations in a manner that emphasised feminist values of equality, autonomy and self-worth.

In-shoe plantar pressure distribution during running on natural grass and asphalt in recreational runners

The type of surface used for running can influence the load that the locomotor apparatus will absorb and the load distribution could be related to the incidence of chronic injuries. As there is no consensus on how the locomotor apparatus adapts to loads originating from running Surfaces with different compliance, the objective of this study was to investigate how loads are distributed over the plantar surface while running on natural grass and on a rigid surface-asphalt. Forty-four adult runners with 4 3 years of running experience were evaluated while running at 12 km/h for 40 m wearing standardised running shoes and Pedar insoles (Novel). Peak pressure, contact time and contact area were measured in six regions: lateral, central and medial rearfoot, midfoot, lateral and media] forefoot. The Surfaces and regions were compared by three ANOVAS (2 x 6). Asphalt and natural grass were statistically different in all variables. Higher peak pressures were observed on asphalt at the central (p < 0.001) [grass: 303.8(66.7) kPa; asphalt: 342.3(76.3) kPa] and lateral rearfoot (p < 0.001) [grass: 312.7(75.8) kPa: asphalt: 350.9(98.3) kPa] and lateral forefoot (p < 0.001) [grass: 221.5(42.9) kPa asphalt: 245.3(55.5) kPa]. For natural grass, contact time and contact area were significantly greater at the central rearfoot (p < 0.001). These results suggest that natural grass may be a Surface that provokes lighter loads on the rearfoot and forefoot in recreational runners. (C) 2008 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Influence of wearing an unstable shoe on thigh and leg muscle activity and venous response in upright standing

Purpose: To quantify the effect of unstable shoe wearing on muscle activity and haemodynamic response during standing. Methods: Thirty volunteers were divided into 2 groups: the experimental group wore an unstable shoe for 8 weeks, while the control group used a conventional shoe for the same period. Muscle activity of the medial gastrocnemius, tibialis anterior, rectus femoris and biceps femoris and venous circulation were assessed in quiet standing with the unstable shoe and barefoot. Results: In the first measurement there was an increase in medial gastrocnemius activity in all volunteers while wearing the unstable shoe. On the other hand, after wearing the unstable shoe for eight weeks these differences were not verified. Venous return increased in subjects wearing the unstable shoe before and after training. Conclusions: The unstable shoe produced changes in electromyographic characteristics which were advantageous for venous circulation even after training accommodation by the neuromuscular system.

Influence of an unstable shoe on compensatory postural adjustments: an experimental evaluation

This study attempted to evaluate the influence of using an unstable shoe in muscle re-cruitment strategies and center of pressure (CoP) displacement after the application of an external perturba-tion. Fourteen healthy female subjects participated in this study. The electromyographic activity of medial ga-strocnemius, tibialis anterior, rectus femoris, biceps femoris, rectus abdominis and erector spinae muscles and the kinetic values to calculate the CoP were collected and analyzed after the application of an external pertur-bation with the subject in standing position, with no shoes and using unstable footwear. The results showed increased in medial gastrocnemius activity during the first compensatory postural adjustments and late com-pensatory postural adjustments when using an unstable shoe. There were no differences in standard deviation and maximum peak of anteroposterior displacement of CoP between measurements. From the experimental findings, one can conclude that the use of an unstable shoe leads to an increase in gastrocnemius activity with no increase in CoP displacement following an unexpected external perturbation.

Influence of wearing an unstable shoe construction on compensatory control of posture

This study investigated the influence of wearing unstable shoe construction (WUS) on compensatory postural adjustments (CPA) associated with external perturbations. Thirty-two subjects stood on a force platform resisting an anterior-posterior horizontal force applied to a pelvic belt via a cable, which was suddenly released. They stood under two conditions: barefoot and WUS. The electromyographic (EMG) activity of gastrocnemius medialis, tibialis anterior, rectus femoris, biceps femoris, rectus abdominis, and erector spinae muscles and the center of pressure (CoP) displacement were acquired to study CPA. The EMG signal was used to assess individual muscle activity and latency, antagonist co-activation and reciprocal activation at joint and muscle group levels. Compared to barefoot, WUS led to: (1) increased gastrocnemius medialis activity, (2) increased total agonist activity, (3) decreased antagonist co-activation at the ankle joint and muscle group levels, (4) increased reciprocal activation at the ankle joint and muscle group levels, and (5) decrease in all muscle latencies. No differences were observed in CoP displacement between conditions. These findings demonstrate that WUS led to a reorganization of the postural control system associated to improved performance of some components of postural control responses.

User-interface technologies for the industrial environment: towards the cyber-factory

In the past few years the so-called gadgets like cellular phones, personal data assistants and digital cameras are more widespread even with less technological aware users. However, for several reasons, the factory-floor itself seems to be hermetic to this changes ... After the fieldbus revolution, the factory-floor has seen an increased use of more and more powerful programmable logic controllers and user interfaces but the way they are used remains almost the same. We believe that new user-computer interaction techniques including multimedia and augmented rcaliry combined with now affordable technologies like wearable computers and wireless networks can change the way the factory personal works together with the roachines and the information system on the factory-floor. This new age is already starting with innovative uses of communication networks on the factory-floor either using "standard" networks or enhancing industrial networks with multimedia and wireless capabilities.

Industrial multimedia over factory-floor networks

In this paper we describe a real-time industrial communication network able to support both controlrelated and multimedia traffic. The industrial communication network is based on the PROFIBUS standard, with multimedia capabilities being provided by an adequate integration of TCP/IP protocols into the PROFIBUS stack. From the operational point of view the integration of TCP/IP into PROFIBUS is by itself a challenge, since the master-slave nature of the PROFIBUS MAC makes complex the implementation of the symmetry inherent to IP communications. From the timeliness point of view the challenge is two folded. On one hand the multimedia traffic should not interfere with the timing requirements of the "native" control-related PROFIBUS traffic (typically hard real-time). On the other hand multimedia traffic requires certain levels of quality-of-service to be attained. In this paper we provide a methodology that enables fulfilling the timing requirements for both types of traffic in these real-time industrial LAN. Moreover, we describe suitable algorithms for the scheduling support of concurrent multimedia streams.

Timeliness in COTS factory-floor distributed systems: What role for simulation?

In the past few years, a significant amount of work has been devoted to the timing analysis of Ethernet-based technologies. However, none of these address the problem of timeliness evaluation at a holistic level. This paper describes a research framework embracing this objective. It is advocated that, simulation models can be a powerful tool, not only for timeliness evaluation, but also to enable the introduction of less pessimistic assumptions in an analytical response time approach, which, most often, are afflicted with simplifications leading to pessimistic assumptions and, therefore, delusive results. To this end, we address a few inter-linked research topics with the purpose of setting a framework for developing tools suitable to extract temporal properties of commercial-off-the-shelf (COTS) factory-floor communication systems.

Distributed computing for the factory-floor: a real-time approach using WorldFIP networks

Field communication systems (fieldbuses) are widely used as the communication support for distributed computer-controlled systems (DCCS) within all sort of process control and manufacturing applications. There are several advantages in the use of fieldbuses as a replacement for the traditional point-to-point links between sensors/actuators and computer-based control systems, within which the most relevant is the decentralisation and distribution of the processing power over the field. A widely used fieldbus is the WorldFIP, which is normalised as European standard EN 50170. Using WorldFIP to support DCCS, an important issue is “how to guarantee the timing requirements of the real-time traffic?” WorldFIP has very interesting mechanisms to schedule data transfers, since it explicitly distinguishes periodic and aperiodic traffic. In this paper, we describe how WorldFIP handles these two types of traffic, and more importantly, we provide a comprehensive analysis on how to guarantee the timing requirements of the real-time traffic.

In-shoe plantar pressures and ground reaction forces during overweight adults' overground walking

Purpose: Because walking is highly recommended for prevention and treatment of obesity and some of its biomechanical aspects are not clearly understood for overweight people, we compared the absolute and normalized ground reaction forces (GRF), plantar pressures, and temporal parameters of normal-weight and overweight participants during overground walking. Method: A force plate and an in-shoe pressure system were used to record GRF, plantar pressures (foot divided in 10 regions), and temporal parameters of 17 overweight adults and 17 gender-matched normal-weight adults while walking. Results: With high effect sizes, the overweight participants showed higher absolute medial-lateral and vertical GRF and pressure peaks in the central rearfoot, lateral midfoot, and lateral and central forefoot. However, analyzing normalized (scaled to body weight) data, the overweight participants showed lower vertical and anterior-posterior GRF and lower pressure peaks in the medial rearfoot and hallux, but the lateral forefoot peaks continued to be greater compared with normal-weight participants. Time of occurrence of medial-lateral GRF and pressure peaks in the midfoot occurred later in overweight individuals. Conclusions: The overweight participants adapted their gait pattern to minimize the consequences of the higher vertical and propulsive GRF in their musculoskeletal system. However, they were not able to improve their balance as indicated by medial-lateral GRF. The overweight participants showed higher absolute pressure peaks in 4 out of 10 foot regions. Furthermore, the normalized data suggest that the lateral forefoot in overweight adults was loaded more than the proportion of their extra weight, while the hallux and medial rearfoot were seemingly protected.

Integrated consideration of product quality within factory automation systems

Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2013