The mode control of asymmetric Fabry-Perot optical modulators with multiple quantum wells

The asymmetric Fabry-Perot (ASFP) mode position with the thickness of different index coating layer is calculated. The reason for the blue shift of the ASFP mode with the increasing thickness of low index coating layer is analyzed and this phenomenon is observed in experiments. With the wet-etching method, the ASFP mode can be tuned to the desired wavelength and thus the deviation of growth can be compensated. This method is used to improve the contrast ratio of modulators. With the ASFP mode located at different positions relative to the unbiased e-hh peak, different modulation characteristics are demonstrated.

Design and fabrication of 1.06 mu m resonant-cavity enhanced reflective modulator with GaInAs/GaAs quantum wells

A resonant-cavity enhanced reflective optical modulator is designed and frabricated, with three groups of three highly strained InGaAS/GaAs quantum wells in the cavity, for the low voltage and high contrast ratio operation. The quantum wells are positioned in antinodes of the optical standing wave. The modulator is grown in a single growth step in an molecular beam epitaxy system, using GaAs/AIAs distributed Bragg reflectors as both the top and bottom mirrors. Results show that the reflection device has a modulation extinction of 3 dB at -4.5 V bias.

FREQUENCY SELECTIVE SURFACE WITH DUAL BAND SWITCHABLE REFLECTION AND TRANSMISSION CHARACTERISTICS

A pin diode-loaded active doubly periodic flat strip FSS is shown to act as a dynamic screen. It is shown that by means of d.c. bias control, we can utilize the screen in, (1) transmission mode as a dual band electromagnetic shutter, or with the inclusion of a ground plane in reflection mode, (is (2) it dual band refection canceller. (3) an amplitude shift keying (ASK) spatial modulator. The properties of the FSS are characterized using a specially designed parallel plate waveguide simulator that permits normal incidence excitation of the FSS under test. (C) 2009 Wiley Periodicals. Inc. Microwave Opt Technol Lett 51: 2059-2061, 2009; Published online in Wiley Inter-Science (www. interscience.wiley.com). DOI 10.1002/mop.24547

Acousto-optic modulation of optical reflection properties in fiber Bragg gratings and the application in fiber lasers

This thesis aims to investigate the interaction of acoustic waves and fiber Bragg gratings (FBGs) in standard and suspended-core fibers (SCFs), to evaluate the influence of the fiber, grating and modulator design on the increase of the modulation efficiency, bandwidth and frequency. Initially, the frequency response and the resonant acoustic modes of a low frequency acousto-optic modulator (f < 1.2 MHz) are numerically investigated by using the finite element method. Later, the interaction of longitudinal acoustic waves and FBGs in SCFs is also numerically investigated. The fiber geometric parameters are varied and the strain and grating properties are simulated by means of the finite element method and the transfer matrix method. The study indicates that the air holes composing the SCF cause a significant reduction of the amount of silica in the fiber cross section increasing acousto-optic interaction in the core. Experimental modulation of the reflectivity of FBGs inscribed in two distinct SCFs indicates evidences of this increased interaction. Besides, a method to acoustically induce a dynamic phase-shift in a chirped FBG employing an optimized design of modulator is shown. Afterwards, a combination of this modulator and a FBG inscribed in a three air holes SCF is applied to mode-lock an ytterbium doped fiber laser. To improve the modulator design for future applications, two other distinct devices are investigated to increase the acousto-optic interaction, bandwidth and frequency (f > 10 MHz). A high reflectivity modulation has been achieved for a modulator based on a tapered fiber. Moreover, an increased modulated bandwidth (320 pm) has been obtained for a modulator based on interaction of a radial long period grating (RLPG) and a FBG inscribed in a standard fiber. In summary, the results show a considerable reduction of the grating/fiber length and the modulator size, indicating possibilities for compact and faster acousto-optic fiber devices. Additionally, the increased interaction efficiency, modulated bandwidth and frequency can be useful to shorten the pulse width of future all-fiber mode-locked fiber lasers, as well, to other photonic devices which require the control of the light in optical fibers by electrically tunable acoustic waves.

Learning, evaluation, action and reflection for new technologies, empowerment and rural sustainability (The LEARNERS project)

-

Reflection on the 'Landscapes of Rights' Conference, Adelaide, 2009

This article presents a reflective view of three teaching colleagues from Queensland University of Technology, Brisbane who had attended and participated in the 'Landscapes of Rights' Conference in Adelaide, July 2009. The conference is a biennial event run by the Reggio Emilia-Australia Information Exchange. The authors explore and reflect on the provocations posed throughout this conference and consider these in light of their ongoing work in the field of teacher education, of early childhood teaching and as active supporters of children's rights.

Assessing reflection skills in law using criterion-referenced assessment

This paper focuses on the assessment of reflective practice, an issue that has not been fully explored within legal education literature. While the issue of how reflective practice should be taught is one that requires careful consideration, it is beyond the scope of this paper to consider both the teaching and the assessment of reflective practice. Part II of this paper conceptualises reflective practice, and Part III explores the benefits of reflective practice in legal education and the use of reflective writing to assess experiential learning in a legal context. Part IV considers the diverse issues that arise in assessing reflective practice and whether there is an objective method for assessing reflection. Part V of the paper examines the assessment of reflective practice in the context of an exemplar undergraduate law subject that uses a reflective report to assess students’ experiential learning during a court visit.14 Finally, Part VI offers a rubric to facilitate criterion-referenced assessment of reflective practice and thereby provides a framework for assessing reflection skills. It is suggested that the rubric is transferable not only to other law subjects but also to subjects in other disciplines.

Determining the zone of reflection for posterior corneal surface comparison phakometry

Although comparison phakometry has been used by a number of studies to measure posterior corneal shape, these studies have not calculated the size of the posterior corneal zones of reflection they assessed. This paper develops paraxial equations for calculating posterior corneal zones of reflection, based on standard keratometry equations and equivalent mirror theory. For targets used in previous studies, posterior corneal reflection zone sizes were calculated using paraxial equations and using exact ray tracing, assuming spherical and aspheric corneal surfaces. Paraxial methods and exact ray tracing methods give similar estimates for reflection zone sizes less than 2 mm, but for larger zone sizes ray tracing methods should be used.

Critical social theory and transformative learning : evidence in pre-service teachers' service-learning reflection logs

This paper reports on the opportunities for transformational learning experienced by a group of pre-service teachers who were engaged in service-learning as a pedagogical process with a focus on reflection. Critical social theory informed the design of the reflection process as it enabled a move away from knowledge transmission toward knowledge transformation. The structured reflection log was designed to illustrate the critical social theory expectations of quality learning that teach students to think critically: ideology critique and utopian critique. Butin's lenses and a reflection framework informed by the work of Bain, Ballantyne, Mills and Lester were used in the design of the service-learning reflection log. Reported data provide evidence of transformational learning and highlight how the students critique their world and imagine how they could contribute to a better world in their work as a beginning teacher.

Reflection on the use of rating and score cards for asset and service assessment

The concept of star rating council facilities has progressively gained traction in Australia following the work of Dean Taylor at Marochy Shire Council in Queensland in 2006 – 2007 and more recently by the Victorian STEP asset management program. The following paper provides a brief discussion on the use and merits of star rating within community asset management. We suggest that the current adoption of the star rating system to manage community investment in services is lacking in consistency. It is suggested that the major failing is a lack of clear understanding in the purpose being served by the systems. The discussion goes on to make some recommendations on how the concept of a star system could be further enhanced to serve the needs of our communities better.