Process Capability Indexes Determination on Tabletting Performance during the Process Validation for Metamizol Tablets

The aim of the present study was to provide a numerical measure, through the process capability indexes (PCIs), C(p) and C(pk), on whether or not the manufacturing process can be considered capable of producing metamizol (500 mg) tablets. They were also used as statistical tool in order to prove the consistency of the tabletting process, making sure that the tablet weight and the content uniformity of metamizol are able to comply with the preset requirements. Besides that, the ANOVA, the t-test and the test for equal variances were applied to this study, allowing additional knowledge of the tabletting phase. Therefore, the proposed statistical approach intended to assure more safety, precision and accuracy on the process validation analysis.

Shewhart's control charts and process capability ratio applied to a sewage treatment station

The current study used statistical methods of quality control to evaluate the performance of a sewage treatment station. The concerned station is located in Cascavel city, Paraná State. The evaluated parameters were hydrogenionic potential, settleable solids, total suspended solids, chemical oxygen demand and biochemical oxygen demand in five days. Statistical analysis was performed through Shewhart control charts and process capability ratio. According to Shewhart charts, only the BOD(5.20) variable was under statistical control. Through capability ratios, we observed that except for pH the sewage treatment station is not capable to produce effluents under characteristics that fulfill specifications or standard launching required by environmental legislation.

Is more capability always beneficial for firm performance? Market orientation, core business process capabilities, and business environment

This study examines the role of capabilities in core marketing-related business processes–product development management (PDM), supply chain management (SCM) and customer relationship management (CRM)–in translating a firm’s market orientation (MO) into firm performance. The study is the first to examine the interplay of all three business process capabilities simultaneously, while investigating how environmental conditions moderate their performance effects. A moderated mediation analysis of 468 product-focused firms finds that PDM and CRM process capabilities play important mediating roles, whereas SCM process capability does not mediate the relationship between MO and performance. However, the relative importance of the capabilities as mediators varies along the degree of environmental turbulence, and under certain conditions, an increase in the level of business process capability may even turn detrimental.

Process Variability in Micro-Embossing

A promising technique for the large-scale manufacture of micro-fluidic devices and photonic devices is hot embossing of polymers such as PMMA. Micro-embossing is a deformation process where the workpiece material is heated to permit easier material flow and then forced over a planar patterned tool. While there has been considerable, attention paid to process feasibility very little effort has been put into production issues such as process capability and eventual process control. In this paper, we present initial studies aimed at identifying the origins and magnitude of variability for embossing features at the micron scale in PMMA. Test parts with features ranging from 3.5- 630 µm wide and 0.9 µm deep were formed. Measurements at this scale proved very difficult, and only atomic force microscopy was able to provide resolution sufficient to identify process variations. It was found that standard deviations of widths at the 3-4 µm scale were on the order of 0.5 µm leading to a coefficient of variation as high as 13%. Clearly, the transition from test to manufacturing for this process will require understanding the causes of this variation and devising control methods to minimize its magnitude over all types of parts.

SPICE: a business process diagnostic tool for construction projects

The construction sector is under growing pressure to increase productivity and improve quality, most notably in reports by Latham (1994, Constructing the Team, HMSO, London) and Egan (1998, Rethinking Construction, HMSO, London). A major problem for construction companies is the lack of project predictability. One method of increasing predictability and delivering increased customer value is through the systematic management of construction processes. However, the industry has no methodological mechanism to assess process capability and prioritise process improvements. Standardized Process Improvement for Construction Enterprises (SPICE) is a research project that is attempting to develop a stepwise process improvement framework for the construction industry, utilizing experience from the software industry, and in particular the Capability Maturity Model (CMM), which has resulted in significant productivity improvements in the software industry. This paper introduces SPICE concepts and presents the results from two case studies conducted on design and build projects. These studies have provided further in-sight into the relevance and accuracy of the framework, as well as its value for the construction sector.

CRITICAL POINTS OF THE PRODUCTION PROCESS OF SOLID WOOD FLOORING

The quality concepts represent one of the important factors for the success of organizations and among these concepts the stabilization of the production process contributes to the improvement, waste reduction and increased competitiveness. Thus, this study aimed to evaluate the production process of solid wood flooring on its predictability and capacity, based on its critical points. Therefore, the research was divided into three stages. The first one was the process mapping of the company and the elaboration of flowcharts for the activities. The second one was the identification and the evaluation of the critical points using FMEA (Failure Mode and Effect Analysis) adapted methodology. The third one was the evaluation of the critical points applying the statistical process control and the determination of the process capability for the C-pk index. The results showed the existence of six processes, two of them are critical. In those two ones, fifteen points were considered critical and two of them, related with the dimension of the pieces and defects caused by sandpaper, were selected for evaluation. The productive process of the company is unstable and not capable to produce wood flooring according to the specifications and, therefore these specifications should be reevaluated.

Manufacturing process challenges when machining superalloys

The implementation of advanced manufacturing systems with high process capability is an essential requirement for the high value manufacturing industries. To ensure high process capability, industry needs to deal with the requirement for tight tolerances and the unavoidable variations in materials, and manufacturing and inspection processes. In the case of machining superalloys, such variations result in the need to change the machine parameters for producing different batches of materials from different suppliers. This is required in order to get the process under control and reduce waste and defects, leading to better competitiveness. This papers discuss the variability in materials and the corresponding process requirements when machining superalloys, and highlights the impact of metrology in achieving manufacturing process improvement.

Estudo e melhoria da capacidade de um processo industrial de panificação

Esta dissertação apresenta um estudo da capacidade do processo inserido uma empresa de panificação. Antes de iniciar o estudo propriamente dito, foi realizada uma calibração à balança na qual este estudo seria realizado. Os índices de capacidade do processo têm como principal finalidade verificar se a média e a variabilidade do processo estão em concordância com o alvo e os limites de especificação. Esta verificação permite o ajustamento do processo de maneira a reduzir a produção de produtos defeituosos. Neste trabalho foram utilizados os índices de capacidade considerando que as condições são ideais, isto é, quando existe normalidade nas amostras. Quando as condições não são ideais, como foi verificado, foram utilizadas técnicas para o cálculo dos índices de capacidade para este tipo de situações. A aplicação da metodologia de análise da capacidade do processo foi realizada com sucesso com recurso a amostras retiradas numa balança calibrada para o efeito.

Reengenharia do processo de reclamações das lojas

Num contexto global de incerteza, as cadeias de abastecimento mais ágeis e os clientes com mais exigências manifestam uma constante preocupação com a melhoria contínua da eficiência das operações logísticas. O presente projeto foi desenvolvido na empresa Sonae Modelo Continente Hipermercados, S.A, uma das duas principais empresas do retalho da grande distribuição alimentar em Portugal. Sendo a logística um fator chave de sucesso, uma das atividades críticas de uma empresa, é identificada a oportunidade de melhoria operacional do processo de negócio, a partir das reclamações dos clientes internos. O tratamento destas reclamações, incidências, é de grande complexidade e responsabilidade para a área do Logistics Customer Service. O projeto desenvolvido, a ‘Reengenharia do processo de reclamações das Lojas’, surgiu da necessidade de criar um modelo e processo de negócio de melhoria contínua, que solucione falhas operacionais com implicação na Logística, Supply Chain e em outras áreas da empresa. A procura dessa melhoria é o objetivo deste trabalho. Pretende-se, com a proposta aqui apresentada, a interligação e automatização da cadeia abastecimento, para superar as ocorrências operacionais, elevar a qualidade do serviço, aumentar a capacidade do processo e incorporar uma monitorização das atividades de input (Lojas) e output (Entrepostos), para futura rastreabilidade das operações, através da integração da cadeia de abastecimento, para a satisfação do cliente interno. Para a elaboração do novo modelo de processo foi seguida a orientação da reengenharia de processos de negócio, nas suas linhas orientadoras: identificação do modelo de processo atual e das suas necessidades; definição dos objetivos norteadores do projeto a apresentar; redesenhar novo modelo de processo de negócio, de modo a dar resposta às necessidades detetadas nos clientes internos.

Evaluation of the determinism of the actuator sensor interface (ASI) on programmable logic controllers (PLC), personal computers (PC) and real-time operating systems (RTOS)

The purpose of this study was to evaluate the determinism of the AS-lnterface network and the 3 main families of control systems, which may use it, namely PLC, PC and RTOS. During the course of this study the PROFIBUS and Ethernet field level networks were also considered in order to ensure that they would not introduce unacceptable latencies into the overall control system. This research demonstrated that an incorrectly configured Ethernet network introduces unacceptable variable duration latencies into the control system, thus care must be exercised if the determinism of a control system is not to be compromised. This study introduces a new concept of using statistics and process capability metrics in the form of CPk values, to specify how suitable a control system is for a given control task. The PLC systems, which were tested, demonstrated extremely deterministic responses, but when a large number of iterations were introduced in the user program, the mean control system latency was much too great for an AS-I network. Thus the PLC was found to be unsuitable for an AS-I network if a large, complex user program Is required. The PC systems, which were tested were non-deterministic and had latencies of variable duration. These latencies became extremely exaggerated when a graphing ActiveX was included in the control application. These PC systems also exhibited a non-normal frequency distribution of control system latencies, and as such are unsuitable for implementation with an AS-I network. The RTOS system, which was tested, overcame the problems identified with the PLC systems and produced an extremely deterministic response, even when a large number of iterations were introduced in the user program. The RTOS system, which was tested, is capable of providing a suitable deterministic control system response, even when an extremely large, complex user program is required.

Field Evaluation of Quality Management Concrete, MLR-97-3, 1998

Quality management concrete allows the contractor to develop the mix design for the portland cement concrete. This research was initiated to gain knowledge about contractor mix designs. An experiment was done to determine the variation in cylinders, beams, and cores that could be used to test the strength of the contractor's mix. In addition, the contractor's cylinder strengths and gradations were analyzed for statistical stability and process capability. This research supports the following conclusions: (1) The mold type used to cast the concrete cylinders had an effect on the compressive strength of the concrete. The 4.5-in. by 9-in. (11.43-cm by 22.86-cm) cylinders had lower strength at a 95% confidence interval than the 4-in. by 8-in. (10.16-cm by 20.32-cm) and 6-in. by 12-in. (15.24-cm by 30.48-cm) cylinders. (2) The low vibration consolidation effort had the lowest strength of the three consolidation efforts. In particular, an interaction occurred between the low vibration effort and the 4.5-in. by 9-in. (11.43-cm by 22.86-cm) mold. This interaction produced very low compressive strengths when compared with the other consolidation efforts. (3) A correlation of 0.64 R-squared was found between the 28 day cylinder and 28 day compressive strengths. (4) The compressive strength results of the process control testing were not in statistical control. The aggregate gradations were mostly in statistical control. The gradation process was capable of meeting specification requirements. However, many of the sieves were off target. (5) The fineness modulus of the aggregate gradations did not correlate well with the strength of the concrete. However, this is not surprising considering that the gradation tests and the strength tests did not represent the same material. In addition, the concrete still has many other variables that will affect its strength that were not controlled.

Vaatimustenkäsittely ohjelmistopalveluyrityksessä

Vaatimustenkäsittely on erittäin tärkeä osa-alue tehtäessä uusia ohjelmistoja. Vaatimustenkäsittely ei ole vain vaatimusmääritettydokumentin kokoamista ohjelmistoprojektin alussa vaan siihen sisältyy vaatimusten määrittely, hallinta ja todentaminen koko ohjelmiston elinkaaren ajan. Ohjelmistopalveluyrityksessä vaatimustenkäsittelyn merkitys korostuu entisestään ja tällaisella yrityksellä on oltava toimiva vaatimustenkäsittelyprosessi. Tässä työssä esitellään vaatimustenkäsittelyn teoriaa, prosesseihin liittyvää laadunvalvontaa sekä prosessien arviointi ja -kehittämismalleja. Työssä tarkastellaan kahden erityyppisen ohjelmistopalveluyrityksen vaatimustenkäsittelyä ja esitetään havaintoja prosessimalleista. Työn tuloksena esitetään johtopäätöksiä vaatimustenkäsittelystä ja siihen liittyvistä prosesseista sekä laadunvalvonnasta.

Multifactor Performance Study on Complex Systems for the Benefit of Management

The primary objective is to identify the critical factors that have a natural impact on the performance measurement system. It is important to make correct decisions related to measurement systems, which are based on the complex business environment. The performance measurement system is combined with a very complex non-linear factor. The Six Sigma methodology is seen as one potential approach at every organisational level. It will be linked to the performance and financial measurement as well as to the analytical thinking on which the viewpoint of management depends. The complex systems are connected to the customer relationship study. As the primary throughput can be seen in a new well-defined performance measurement structure that will also be facilitated as will an analytical multifactor system. These critical factors should also be seen as a business innovation opportunity at the same time. This master's thesis has been divided into two different theoretical parts. The empirical part consists of both action-oriented and constructive research approaches with an empirical case study. The secondary objective is to seek a competitive advantage factor with a new analytical tool and the Six Sigma thinking. Process and product capabilities will be linked to the contribution of complex system. These critical barriers will be identified by the performance measuring system. The secondary throughput can be recognised as the product and the process cost efficiencies which throughputs are achieved with an advantage of management. The performance measurement potential is related to the different productivity analysis. Productivity can be seen as one essential part of the competitive advantage factor.

Surface Modification of Ceramics

Ceramics are widely used in industrial applications due to their advantageous thermal and mechanical stability. Corrosion of ceramics is a great problem resulting in significant costs. Coating is one method of reducing adversities of corrosion. There are several different thin film deposition processes available such as sol-gel, Physical and Chemical Vapour Deposition (PVD and CVD). One of the CVD processes, called Atomic Layer Deposition (ALD) stands out for its excellent controllability, accuracy and wide process capability. The most commonly mentioned disadvantage of this method is its slowness which is partly compensated by its capability of processing large areas at once. Several factors affect the ALD process. Such factors include temperature, the grade of precursors, pulse-purge times and flux of precursors as well as the substrate used. Wrongly chosen process factors may cause loss of self-limiting growth and thus, non-uniformities in the deposited film. Porous substrates require longer pulse times than flat surfaces. The goal of this thesis was to examine the effects of ALD films on surface properties of a porous ceramic material. The analyses applied were for permeability, bubble point pressure and isoelectric point. In addition, effects of the films on corrosion resistance of the substrate in aqueous environment were investigated. After being exposured to different corrosive media the ceramics and liquid samples collected were analysed both mechanically and chemically. Visual and contentual differences between the exposed and coated ceramics versus the untreated and uncoated ones were analysed by scanning electron microscope. Two ALD film materials, dialuminium trioxide and titanium dioxide were deposited on the ceramic substrate using different pulse times. The results of both film materials indicated that surface properties of the ceramic material can be modified to some extent by the ALD method. The effect of the titanium oxide film on the corrosion resistance of the ceramic samples was observed to be fairly small regardless of the pulse time.

Teleskooppipuomin valmistuksen kehittäminen

KESLA 2110T -autonosturin siirtopuomin teleskooppimainen rakenne koostuu kolmesta sisäkkäin menevästä puomista. Näiden puomien muodonmuutokset ja mittavaihtelut ovat kriittisiä seikkoja siirtopuomin kokoonpantavuuden kannalta. Liian suuret muodonmuutokset ja mittavaihtelut aiheuttavat ylimääräistä työtä siirtopuomien kokoonpanossa, mikä lisää tuotteen läpimenoaikaa ja valmistuskustannuksia. Työssä pyrittiin selvittämään valmistusprosessin kriittisimmät osat kokoonpantavuuden kannalta sekä varmistamaan niiden vaikutus mittauksin. Valmistusprosessin ongelmakohtia selvitettiin ensin haastattelemalla tuotannon työntekijöitä ja toimihenkilöitä. Saatujen tuloksien perusteella suunniteltiin tarkoituksenmukaiset mittausjärjestelyt, joilla valmistusprosessin ongelmakohdat voidaan todeta. Mittaukset suoritettiin kahdelle viiden siirtopuomin koesarjalle ja samalla kehitettiin valmistusprosessia. Puomien mittauksissa keskityttiin kokoonpanon kannalta kriittisiin mittoihin. Mittatuloksia arvioidaan toleranssien, standardien ja prosessien suorituskyvyn parametrien avulla. Työssä selvitettiin myös rullamuovauksen soveltuvuutta puomien valmistusmenetelmäksi sekä välyksen vaikutusta kokoonpantavuuden kehittämiseksi. Mittauksissa havaittiin mittavirheiden kertautuvan valmistusprosessin varrella. Kokoonpantavuuden kannalta kriittisimmät virheet ovat puomien alakotelon V-pohjan toislaitaisuus sekä puomien kieroutuminen hitsausvaiheessa. Puomien korkeus- tai leveysvaihteluilla ei ole suurta merkitystä, sillä niitä voidaan kompensoida liukupaloja säätämällä.