Maturity models in the hospital information systems management initial research

Os modelos de maturidade são instrumentos facilitadores da gestão das organizações, incluindo a gestão da sua função sistemas de informação, não sendo exceção as organizações hospitalares. Neste artigo apresenta-se uma investigação inicial que visa o desenvolvimento de um abrangente modelo de maturidade para a gestão dos sistemas de informação hospitalares. O desenvolvimento deste modelo justifica-se porque os modelos de maturidade atuais no domínio da gestão dos sistemas informação hospitalares ainda se encontram numa fase embrionária de desenvolvimento, sobretudo porque são pouco detalhados, não disponibilizam ferramentas para determinação da maturidade e não apresentam as características dos estágios de maturidade estruturadas por diferentes fatores de influência.

The use of maturity models in improving project management performance:an empirical investigation

Purpose – The purpose of the paper was to conduct an empirical investigation to explore the impact of project management maturity models (PMMMs) on improving project performance. Design/methodology/approach – The investigation used a cross-case analysis involving over 90 individuals in seven organisations. Findings – The findings of the empirical investigation indicate that PMMMs demonstrate very high levels of variability in individual's assessment of project management maturity. Furthermore, at higher levels of maturity, the type of performance improvement adopted following their application is related to the type of PMMM used in the assessment. The paradox of the unreliability of PMMMs and their widespread acceptance is resolved by calling upon the “wisdom of crowds” phenomenon which has implications for the use of maturity model assessments in other arena. Research limitations/implications – The investigation does have the usual issues associated with case research, but the steps that have been taken in the cross-case construction and analysis have improved the overall robustness and extendibility of the findings. Practical implications – The tendency for PMMMs to shape improvements based on their own inherent structure needs further understanding. Originality/value – The use of empirical methods to investigate the link between project maturity models and extant changes in project management performance is highly novel and the findings that result from this have added resonance.

Integrated management systems: A model for maturity assessment

Maturity models are adopted to minimise our complexity perception over a truly complex phenomenon. In this sense, maturity models are tools that enable the assessment of the most relevant variables that impact on the outputs of a specific system. Ideally a maturity model should provide information concerning the qualitative and quantitative relationships between variables and how they affect the latent variable, that is, the maturity level. Management systems (MSs) are implemented worldwide and by an increasing number of companies. Integrated management systems (IMSs) consider the implementation of one or several MSs usually coexisting with the quality management subsystem (QMS). It is intended in this chapter to report a model based on two components that enables the assessment of the IMS maturity, considering the key process agents (KPAs) identified through a systematic literature review and the results collected from two surveys.

Evaluating the Maturity of Data Management Practices in a Major Energy Provider Company

Data is the most important asset of a company in the information age. Other assets, such as technology, facilities or products can be copied or reverse-engineered, employees can be brought over, but data remains unique to every company. As data management topics are slowly moving from unknown unknowns to known unknowns, tools to evaluate and manage data properly are developed and refined. Many projects are in progress today to develop various maturity models for evaluating information and data management practices. These maturity models come in many shapes and sizes: from short and concise ones meant for a quick assessment, to complex ones that call for an expert assessment by experienced consultants. In this paper several of them, made not only by external inter-organizational groups and authors, but also developed internally at a Major Energy Provider Company (MEPC) are juxtaposed and thoroughly analyzed. Apart from analyzing the available maturity models related to Data Management, this paper also selects the one with the most merit and describes and analyzes using it to perform a maturity assessment in MEPC. The utility of maturity models is two-fold: descriptive and prescriptive. Besides recording the current state of Data Management practices maturity by performing the assessments, this maturity model is also used to chart the way forward. Thus, after the current situation is presented, analysis and recommendations on how to improve it based on the definitions of higher levels of maturity are given. Generally, the main trend observed was the widening of the Data Management field to include more business and “soft” areas (as opposed to technical ones) and the change of focus towards business value of data, while assuming that the underlying IT systems for managing data are “ideal”, that is, left to the purely technical disciplines to design and maintain. This trend is not only present in Data Management but in other technological areas as well, where more and more attention is given to innovative use of technology, while acknowledging that the strategic importance of IT as such is diminishing.

Assessment of purchasing maturity in spare parts supply chain

To describe the change of purchasing moving from administrative to strategic function academics have put forward maturity models which help practitioners to compare their purchasing activities to industry top performers and best practices. However, none of the models aim to distinguish the purchasing maturity from the after-sales point of view, even though after-sales activities are acknowledged as a relevant source of revenue, profit and competitive advantage in most manufacturing firms. The maturity of purchasing and supply management practices have a large impact to the overall performance of the spare parts supply chain and ultimately to the value creation and relationship building for the end customer. The research was done as a case study for a European after-sales organization which is part of a globally operating industrial firm specialized in heavy machinery. The study mapped the current state of the purchasing practices in the case organization and also distinguished the relevant areas for future development. The study was based on the purchasing maturity model developed by Schiele (2007) and investigated also how applicable is the maturity model in the spare parts supply chain context. Data for the assessment was gathered using five expert interviews inside the case organization and other parties involved in the company’s spare parts supply chain. Inventory management dimension was added to the original maturity model in order to better capture the important areas in a spare parts supply chain. The added five questions were deduced from the spare parts management literature and verified as relevant areas by the case organization’s personnel. Results indicate that largest need for development in the case organization are: better collaboration between sourcing and operative procurement functions, use of installed base information in the spare parts management, training plan development for new buyers, assessment of aligned KPI’s between the supply chain parties and better defining the role of after-sales sourcing. The purchasing maturity model used in this research worked well in H&R Leading, Controlling and Inventory Management dimensions. The assessment was more difficult to conduct in the Supplier related processes, Process integration and Organizational structure –dimensions, mainly because the assessment in these sections would for some parts require more company-wide assessment. Results indicate also that the purchasing maturity model developed by Schiele (2007) captures the relevant areas in the spare parts supply as well.

A Business continuity management maturity model : the search for an ISO 22301 Compliant BCM Maturity model

BCM (business continuity Management) is a holistic management process aiming at ensuring business continuity and building organizational resilience. Maturity models offer organizations a tool for evaluating their current maturity in a certain process. In the recent years BCM has been subject to international ISO standardization, while the interest of organizations to bechmark their state of BCM agains standards and the use of maturity models for these asessments has increased. However, although new standards have been introduced, very little attention has been paid to reviewing the existing BCM maturity models in research - especially in the light of the new ISO 22301 standard for BCM. In this thesis the existing BCM maturily models are carefully evaluated to determine whetherthey could be improved. In order to accomplish this, the compliance of the existing models to the ISO 22301 standard is measured and a framework for assessing a maturitymodel´s quality is defined. After carefully evaluating the existing frameworks for maturity model development and evaluation, an approach suggested by Becker et al. (2009) was chosen as the basis for the research. An additionto the procedural model a set of seven research guidelines proposed by the same authors was applied, drawing on the design-science research guidelines as suggested by Hevner et al. (2004). Furthermore, the existing models´ form and function was evaluated to address their usability. Based on the evaluation of the existing BCM maturity models, the existing models were found to have shortcomings in each dimension of the evaluation. Utilizing the best of the existing models, a draft version for an enhanced model was developed. This draft model was then iteratively developed by conducting six semi-structured interviews with BCM professionals in finland with the aim of validating and improving it. As a Result, a final version of the enhanced BCM maturity model was developed, conforming to the seven key clauses in the ISO 22301 standard and the maturity model development guidelines suggested by Becker et al. (2009).

A CMMI-compliant requirements management and development process

Requirements Engineering has been acknowledged an essential discipline for Software Quality. Poorly-defined processes for eliciting, analyzing, specifying and validating requirements can lead to unclear issues or misunderstandings on business needs and project’s scope. These typically result in customers’ non-satisfaction with either the products’ quality or the increase of the project’s budget and duration. Maturity models allow an organization to measure the quality of its processes and improve them according to an evolutionary path based on levels. The Capability Maturity Model Integration (CMMI) addresses the aforementioned Requirements Engineering issues. CMMI defines a set of best practices for process improvement that are divided into several process areas. Requirements Management and Requirements Development are the process areas concerned with Requirements Engineering maturity. Altran Portugal is a consulting company concerned with the quality of its software. In 2012, the Solution Center department has developed and applied successfully a set of processes aligned with CMMI-DEV v1.3, what granted them a Level 2 maturity certification. For 2015, they defined an organizational goal of addressing CMMI-DEV maturity level 3. This MSc dissertation is part of this organization effort. In particular, it is concerned with the required process areas that address the activities of Requirements Engineering. Our main goal is to contribute for the development of Altran’s internal engineering processes to conform to the guidelines of the Requirements Development process area. Throughout this dissertation, we started with an evaluation method based on CMMI and conducted a compliance assessment of Altran’s current processes. This allowed demonstrating their alignment with the CMMI Requirements Management process area and to highlight the improvements needed to conform to the Requirements Development process area. Based on the study of alternative solutions for the gaps found, we proposed a new Requirements Management and Development process that was later validated using three different approaches. The main contribution of this dissertation is the new process developed for Altran Portugal. However, given that studies on these topics are not abundant in the literature, we also expect to contribute with useful evidences to the existing body of knowledge with a survey on CMMI and requirements engineering trends. Most importantly, we hope that the implementation of the proposed processes’ improvements will minimize the risks of mishandled requirements, increasing Altran’s performance and taking them one step further to the desired maturity level.

OPM3® Portugal project: information systems and technologies organizations: outcome analysis

Increasing the maturity in Project Management (PM) has become a goal for many organizations, leading them to adopt maturity models to assess the current state of its PM practices and compare them with the best practices in the industry where the organization is inserted. One of the main PM maturity models is the Organizational Project Management Maturity Model (OPM3®), developed by the Project Management Institute. This paper presents the Information Systems and Technologies organizations outcome analysis, of the assesses made by the OPM3® Portugal Project, identifying the PM processes that are “best” implemented in this particular industry and those in which it is urgent to improve. Additionally, a comparison between the different organizations’ size analyzed is presented.

Vaatimustenkäsittely ohjelmistopalveluyrityksessä

Vaatimustenkäsittely on erittäin tärkeä osa-alue tehtäessä uusia ohjelmistoja. Vaatimustenkäsittely ei ole vain vaatimusmääritettydokumentin kokoamista ohjelmistoprojektin alussa vaan siihen sisältyy vaatimusten määrittely, hallinta ja todentaminen koko ohjelmiston elinkaaren ajan. Ohjelmistopalveluyrityksessä vaatimustenkäsittelyn merkitys korostuu entisestään ja tällaisella yrityksellä on oltava toimiva vaatimustenkäsittelyprosessi. Tässä työssä esitellään vaatimustenkäsittelyn teoriaa, prosesseihin liittyvää laadunvalvontaa sekä prosessien arviointi ja -kehittämismalleja. Työssä tarkastellaan kahden erityyppisen ohjelmistopalveluyrityksen vaatimustenkäsittelyä ja esitetään havaintoja prosessimalleista. Työn tuloksena esitetään johtopäätöksiä vaatimustenkäsittelystä ja siihen liittyvistä prosesseista sekä laadunvalvonnasta.

Pk-yrityksen polku systemaattiseen tuote- ja elinkaaritiedon hallintaan

Tutkimus on tehty Tekesin DTP-ohjelman Sinfonet-tutkimusprojektin puitteissa aikavälillä 2009-2011. Työssä on laadittu kokonaisvaltainen tuote- ja elinkaaritiedon hallinnan (eng. Product Lifecycle Management, PLM) tiekartta ja kehityssuunnitelma pienelle engineering-yritykselle. Työ käsittelee asiakkaan erikoisvaatimusten mukaan räätälöitävän tuotteen tuote- ja elinkaaritiedon hallinnan systematisointia pk-yrityksessä. Vaikka PLM-tiekartta on laadittu yksittäiselle yritykselle, sitä voidaan tietyin edellytyksin soveltaa myös toisten pk-yritysten tai engineeringyritysten PLM:n kehittämiseen. Teoriassa tarkastellaan ensinnäkin kohdeyritykseen liittyviä erityispiirteitä, pyritään ymmärtämään engineering–yrityksen ja pk-yrityksen erikoispiirteitä sekä niiden vaikutusta PLM:n kehittämiseen. Toiseksi esitellään PLM:n viittä keskeistä osaaluetta, yksi- ja viisiulotteisten PLM-kypsyysmallien käyttöä yrityksen nykytilan arvioimiseksi sekä rakennetaan engineering-yrityksen kokonaisvaltainen PLM-malli ja kahdeksan askeleen PLM-kehityspolku. PLM-malli jäsentää tiedonhallintaa prosessien kautta ja se koostuu viidestä osaalueesta: strategia identifioi asiakastarpeet sekä määrittelee kuinka tuotteiden ja prosessien avulla asiakastarpeet tyydytetään; prosessit ovat yrityksen toiminnan ydin, joissa tuotemallit ja tuote- ja tietorakenteet kehitetään sekä tuoteyksilöt toimitetaan asiakkaalle; rakenteet pohjautuvat strategiassa valittuun tuote- ja tiedonhallinnan strategiaan ja niiden tehtävänä on tukea ja tehostaa toimintaprosesseja; kulttuuri ja ihmiset muodostavat aineettoman pääoman, jonka vaikutuksesta prosessit toimivat ja tuotteet pystytään toimittamaan asiakkaalle; informaatioteknologia on työkalu, jota käytetään prosesseissa ja tietorakenteiden ylläpidossa, pääosin dokumentoidun tiedon luomiseen, hankitaan, varastoimiseen, jakamiseen ja soveltamiseen. Tapaustutkimuksessa kuvataan kohdeyrityksen nykytilaa PLM:n viidellä keskeisellä osa-alueella, tehdään PLM kypsyysarvio kahdella menetelmällä, määritellään yrityksen tavoitetila ja laaditaan yritykselle ensin alustava PLM roadmap ja lopulta kokonaisvaltaiseen PLM-malliin perustuva PLM roadmap ja PLM:n jatkokehityssuunnitelma.

Pk-yrityksen innovaatiokyvykkyyden maturiteettimalli

Tämä diplomityö on tehty suorituskyky johtamisen pääaineeseen ja sen tavoitteena on ollut suunnitella ja toteuttaa pieniin ja keskisuuriin yrityksiin soveltuva innovaatiokyvykkyyden maturiteetti- eli kypsyysmalli. Tutkimuksessa käytetään kvalitatiivista eli laadullista lähestymistapaa ja sovelletaan konstruktiivista tutkimusotetta. Tutkimuksen peruskäsitteet ovat innovaatio, innovatiivisuus ja innovaatiokyvykkyys. Innovaatio-käsite voidaan ymmärtää eräänlaiseksi synonyymiksi uutuudelle. Kattavin määritelmä innovaatiolle on ymmärtää se yksittäisen tapahtuman sijasta prosessina. Suorituskyvyn johtamisen näkökulmasta innovatiivisuutta voidaan pitää yhtenä yrityksen sisäisen suorituskyvyn kulmakivenä. Innovaatiokyky on osa yrityksen aineetonta pääomaa sekä organisaation suorituskyvyn ja menestymisen osa-alue ja taustatekijä. Yrityksen koko vaikuttaa sen innovaatiotoimintaan sekä määrällisesti käytettävien resurssien ja tehtävien investointien suuruutena että laadullisesti innovaatiotoiminnan organisoinnissa ja toteutuksessa. Innovaatiokyvykkyyden maturiteettimallin perusajatus on nähdä innovaatiokyvykkyys eteenpäin liikkuvana prosessina, jossa yritys tai organisaatio parantaa omaa asemaansa suhteessa ennalta määrättyihin innovaatiokyvykkyyden tekijöihin. Tutkimuksessa konstruoitu pk-yritysten innovaatiokyvykkyyden maturiteettimalli muodostuu kokonaisuudesta, jossa on kolme tekijää: mittaristo, maturiteettikuvio ja tasoportaat sekä nämä toisiinsa kytkevä innovaatiokyvykkyyden viitekehys. Mallin toimivuutta testattiin heikolla markkinatestillä suomalaisessa tietotekniikka-alan palveluyrityksen tuotekehitysorganisaatiossa. Tuloksien perusteella määritettiin case-organisaation maturiteettitaso. Lisäksi organisaatiosta löydettiin niin kehittämiskohteita kuin vahvuuksiakin.

A FRAMEWORK FOR ACHIEVING LIFECYCLE VALUE IN AEROSPACE PRODUCT DEVELOPMENT

Creation of lifecycle value - a balance of performance with cost and other attributes - represents a challenge for the development of aerospace products in the twenty-first century. This paper examines the concept of lifecycle value that stems from existing approaches of value management and analysis, lifecycle costing, and systems engineering. To ascertain common characteristics of lifecycle value creation, case studies were done for four aircraft programs: F/A- 18E/F, JAS 39 Gripen, F-16C/D, and B-777. A lifecycle value creation framework is introduced, comprised of three phases: value identification, value proposition, value delivery. Based upon observed practices in the four case studies, six value creation attributes were identified. Capability maturity models for the six attributes and three value creation phases are presented. The resulting framework represents a starting point for programs seeking to create lifecycle value for aerospace products.

Análise comparativa de modelos de maturidade em gerenciamento de projetos: uma contribuição ao estudo da maturidade organizacional em setores de engenharia

The purpose of this dissertation is to formulate guidelines for the improvement of maturity models, or the development of new ones, aiming at its application to project departments. The maturity of project management has become critical for organizations that develop projects and want to stand out in the market they serve. For this purpose, maturity models provide paths in order to guarantee that the institutionalization of project management is achieved in the best possible way. Generally, these models assess the organization, define its current situation in managing projects and propose steps to be performed in the search of more advanced levels of maturity. With the objective of contributing to the improvement of maturity models for specific cases, a bibliographical research was conducted for the preparation of a comparative analysis matrix and performed a case study for application of two maturity models (MMGP and PMMM levels 2 and 3), selected based on criteria found in the literature, in an engineering department of an oil company. The case study supported the realization of a comparative analysis of models, from which guidelines were formulated for improvement. The results showed that thedepartment is evaluated in a medium stage of maturity, recording significant progress in some dimensions assessed. They also found that the results of applying the two models are presented as complementary, although the model is highlighted by the greater depth of MMGP diagnostic, considering many variables in their levels of maturity than model PMMM (levels 2 and 3).Finally, directions have been formulated that contribute to the improvement of maturity models, taking in account the organizational environment in which this work was developed

Nível de maturidade e comparação dos PDPs de produtos automotivos

O desenvolvimento de novos produtos, que atendam às necessidades do mercado consumidor, é atividade estratégica para sustentabilidade das organizações. O objetivo deste artigo é comparar e avaliar o nível de maturidade desses processos em duas montadoras de veículos instaladas na região Sul Fluminense do País. São discutidas algumas características dos processos, expõe-se o modelo de avaliação, baseado nos critérios do CMMI (Capability Maturity Model Integration), e são apresentados os resultados de pesquisa que investigou o nível de maturidade junto a 47 representantes das empresas estudadas. Como resultado, foi possível identificar lacunas na estruturação dos PDP's, com diversas práticas e ferramentas usadas de forma isolada e não integradas, havendo campo suficiente - no entendimento dos próprios executivos - para serem aprimorados e refinados, o que permitiria torná-los mais completos, abrangentes e potentes para alavancar os resultados de mercado e financeiros das próprias organizações.

Diagnóstico de modelos de maturidade em educação corporativa como ferramenta de gestão do conhecimento: um estudo de caso

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)