Using the TRAILER tool for managing informal learning in academic and professional contexts: the learner perspective

Informal Learning plays an important role in everyone's life and yet we often are unaware of it. The need to keep track of the knowledge acquired through informal learning is increasing as its sources become increasingly diverse. This paper presents a study on a tool developed to help keeping track of learners' informal learning, both within academic and professional contexts, This tool, developed within the European Commission funded TRAILER project, will further integrate the improvements suggested by users during the piloting phase. The two studied contexts were similar regarding the importance and perception of Informal Learning, but differed concerning tool usage. The overall idea of managing one's informal learning was well accepted and welcomed, which validated the emerging need for a tool with this purpose.

Managing Informal Learning in professional contexts: the learner’s perspective

Informal Learning is present in everyone's life but its awareness only recently has been reported. The need to keep track of the knowledge acquired this way is increasing as its sources diversity also increases. This work presents the pilots trials on the use of a tool developed to help keeping track of the learners’ informal learning, within a number of companies spread out in three countries. This tool developed through the European Commission funded project TRAILER, is still under development, which will allow integrating the set of improving suggestions obtained from users during the piloting phase. The overall idea of managing one’s informal learning was well accepted and welcomed, which validated the emerging need for a tool with this purpose.

Student self-assessment a feedback seeking strategy through competence evaluation

There is a body of literature that suggests that student self-assessment is a main goal in higher education (Boud et al., 1995; Tan, 2008); moreover new forms of work organization require a high level of skills and competences. The efforts to deal with competence gaps could be developed at many levels, such as employers, educational institutions, individuals and public agents. Employers could put into practice competence development programs to moderate these gaps. Educational institutions can restructure the curriculum to support students in attaining the competences that are essential in the labour market. Individuals themselves may deploy their resources (time and money) in general or specific competence training. Further, government agencies could fund competence promotion programs. Such challenges for education drive change in learning curricula and method, to properly include the competences required for developing global workers who can move beyond basic competence, to enhanced flexibility and adaptability. In performance assessment methods, there is a shift from the traditional exam-based assessments to more innovative task assessment, which considers performance in multiple different tasks carry out by students. ICTs make it technologically feasible to carry out a complete and complex selfassessment of competences, which provides immediate results to students or other recipients. In the case of students, the evaluation of competences is relevant as developing competences is part - if not all - of the objectives of education. Therefore, it is an important element of the quality of educational organizations (e.g., universities), and of their organizational success. Further, educational organizations may put special emphasis on some differentiating competences, which can be a means of positioning and differentiation from competitors. Competence assessment is an instrument to make students conscious of their strengths and weaknesses, leading to higher motivation to develop their own learning career

Análisis ecocardiográfico de la función sistólica del ventrículo izquierdo por médicos no cardiólogos con un dispositivo de bolsillo

Se realizó un estudio transversal, se incluyeron 3 residentes no cardiólogos y se les dio formación básica en ecocardiografía (horas teóricas 22, horas prácticas 65), con recomendaciones de la Sociedad Americana de Ecocardiografia y aportes del aprendizaje basado en problemas, con el desarrollo de competencia técnicas y diagnósticas necesarias, se realizó el análisis de concordancia entre residentes y ecocardiografistas expertos, se recolectaron 122 pacientes hospitalizados que cumplieran con los criterios de inclusión y exclusión, se les realizo un ecocardiograma convencional por el experto y una valoración ecocardiográfica por el residente, se evaluó la ventana acústica, contractilidad, función del ventrículo izquierdo y derrame pericárdico. La hipótesis planteada fue obtener una concordancia moderada. Resultados: Se analizó la concordancia entre observadores para la contractilidad miocárdica (Kappa: 0,57 p=0,000), función sistólica del ventrículo izquierdo (Kappa 0,54 p=0.000) siendo esta moderada por estar entre 0,40 – 0,60 y con una alta significancia estadística, para la calidad de la ventana acústica (Kappa: 0,22 p= 0.000) y presencia de derrame pericárdico (Kappa: 0,26 p= 0.000) se encontró una escasa concordancia ubicándose entre 0,20 – 0,40. Se estableció una sensibilidad de 90%, especificidad de 67%, un valor predictivo positivo de 80% y un valor predictivo negativo de 85% para el diagnóstico de disfunción sistólica del ventrículo izquierdo realizado por los residentes.

Desired learning outcomes for the curricula in financial services industry as perceived by professionals in the financial services industry located in the Greater Toronto Area /

This study sought to explore the changing nature of the financial services industry in Toronto, Canada and the impact that these changes will have on the vocational educational outcomes required by Ontario Colleges of Applied Arts and Technology (CAAT) graduates who wish to enter the financial services industry. The study was descriptive and exploratory, based on both quantitative and qualitative data. Triangulation of 3 data sources (a collection of newspaper articles from the Toronto Star between July 1999 and June 2000, the calendars of the 25 CAATs, and a survey questionnaire prepared by me and distributed to subject matter experts who are key practitioners in the financial services industry) was used. The study contains a discussion of how the financial services industry is changing. The first question to be answered was: What do current practitioners in financial services perceive to be the knowledge, skills, and attitudes that will be required of future graduates for employment within the financial services industry? The study found that Ontario CAAT's graduates entering the financial services field need both business and financial services vocational learning outcomes. Colleges should have 2 programs 1 in accounting and 1 in financial services. The report addresses which specific topics should be included in the financial services program. The second question to be answered was: How does this anticipated profile of knowledge, skills, and attitudes change depending on the degree of implementation of the new technologies by the survey respondent? The study found no pattern. The third question to be answered was: In what way do existing programs need to change in the area of accreditation as perceived by the respondents? The study found that for accreditation, 3 credentials should be addressed within the financial services program. These are the Canadian Securities, the Life Underwriters, and the Certified Financial Planner designations. The last question to be answered was: What new knowledge, skills, and attitudes need to be incorporated into college curricula to address changing needs in the employment sector? For each Ontario CAAT which has a financial services program (excluding accounting), their program was reviewed in light of the topics as perceived by professionals in the financial services industry.

Project based learning activities as a means of adapting conventional curricula to the demands of the 21st century aeronautical engineer: The design and building of the EYEFLY 1.

In this paper we report the process of designing and building the EYEFLY 1, a real UAS platform which has just performed its maiden flight. For the development of this aircraft, 30 groups of students from successive years at the Escuela Universitaria de Ingeniería Técnica Aeronáutica (EUITA) of the Universidad Politécnica de Madrid (UPM) carried out their compulsory End of Degree Project as a coordinated Project Based learning activity. Our conclusions clearly indicate that Project Based Learning activities can provide a valid complement to more conventional, theoretically-based, teaching methods. The combination of both approaches will allow us to maintain traditional but well-tested methods for providing our students with a sound knowledge of fundamental engineering disciplines and, at the same time, to introduce our students to exciting and relevant engineering situations and sceneries where social and business skills, such as communication skills, team-working or decision-taking, can be put into practice.

Integrating Service-Learning into Undergraduate Students' Curricula: Recommendations for Best Practices

bold

Evaluation of gastrointestinal motility in awake rats: a learning exercise for undergraduate biomedical students

Souza MA, Souza MH, Palheta RC Jr, Cruz PR, Medeiros BA, Rola FH, Magalhaes PJ, Troncon LE, Santos AA. Evaluation of gastrointestinal motility in awake rats: a learning exercise for undergraduate biomedical students. Adv Physiol Educ 33: 343-348, 2009; doi: 10.1152/advan.90176.2008.-Current medical curricula devote scarce time for practical activities on digestive physiology, despite frequent misconceptions about dyspepsia and dysmotility phenomena. Thus, we designed a hands-on activity followed by a small-group discussion on gut motility. Male awake rats were randomly submitted to insulin, control, or hypertonic protocols. Insulin and control rats were gavage fed with 5% glucose solution, whereas hypertonic-fed rats were gavage fed with 50% glucose solution. Insulin treatment was performed 30 min before a meal. All meals (1.5 ml) contained an equal mass of phenol red dye. After 10, 15, or 20 min of meal gavage, rats were euthanized. Each subset consisted of six to eight rats. Dye recovery in the stomach and proximal, middle, and distal small intestine was measured by spectrophotometry, a safe and reliable method that can be performed by minimally trained students. In a separate group of rats, we used the same protocols except that the test meal contained (99m)Tc as a marker. Compared with control, the hypertonic meal delayed gastric emptying and gastrointestinal transit, whereas insulinic hypoglycemia accelerated them. The session helped engage our undergraduate students in observing and analyzing gut motor behavior. In conclusion, the fractional dye retention test can be used as a teaching tool to strengthen the understanding of basic physiopathological features of gastrointestinal motility.

A Paradigm Shift in Predoctoral Dental Curricula in Brazil: Evaluating the Process of Change

In 2002, the Brazilian Ministry of Education approved the official curricular guidelines for undergraduate courses in Brazil to be adopted by the nation's 188 dental schools. In 2005-06, the Brazilian Dental Education Association (BDEA) promoted workshops in forty-eight of the schools to verify the degree of transformation of the curriculum based on these guidelines. Among the areas analyzed were course philosophy (variables were v1: knowledge production based on the needs of the Brazilian Public Health System [BPHS]; v2: health determinants; and v3: postgraduate studies and permanent education); pedagogical skills (v4: curricular structure; v5: changes in pedagogic and didactic skills; and v6: course program orientation); and dental practice scenarios (v7: diversity of the scenarios for training/learning; v8: academic health care centers opened to the BPHS; and v9: participation of students in health care delivery for the population). The subjects consisted of faculty members (n=711), students (n=228), and employees (n=14). The results showed an incipient degree of curriculum transformation. The degree of innovation was statistically different depending on the type of university (public or private) for variables I, 2, 4, 5, 6, and 7. Private schools reported a higher level of innovation than public institutions. Resistance to transforming the dental curriculum according to the official guidelines may be linked to an ideological conception that supports the private practice model, continues to have faculty members direct all classroom activities, and prevents students from developing an understanding of professional practice as targeted towards the oral health needs of all segments of society.

Reasserting curriculum design through virtual learning environments : The case of MAPE

II European Conference on Curriculum Studies. "Curriculum studies: Policies, perspectives and practices”. Porto, FPCEUP, October 16th - 17th.

Modellus: Learning Physics with Mathematical Modelling

Tese de doutoramento em Ciências da Educação, área de Teoria Curricular e Ensino das Ciências

Lean learning academy: an innovative framework for lean manufacturing training

Worldwide competitiveness poses enormous challenges on managers, demanding a continuous quest to increase rationality in the use of resources. As a management philosophy, Lean Manufacturing focuses on the elimination of activities that do not create any type of value and therefore are considered waste. For companies to successfully implement the Lean Manufacturing philosophy it is crucial that the human resources of the organization have the necessary training, for which proper tools are required. At the same time, higher education institutions need innovative tools to increase the attractiveness of engineering curricula and develop a higher level of knowledge among students, improving their employability. This paper describes how Lean Learning Academy, an international collaboration project between five EU universities and five companies, from SME to Multinational/Global companies, developed and applied an innovative training programme for Engineers on Lean Manufacturing, a successful alternative to the traditional teaching methods in engineering courses.