Mass Conservation Enhancement of Free Boundary Mesolevel Flows during LCM Processes of Composites Manufacturing

Undesirable void formation during the injection phase of the liquid composite moulding process can be understood as a consequence of the non-uniformity of the flow front progression, caused by the dual porosity of the fibre perform. Therefore the best examination of the void formation physics can be provided by a mesolevel analysis, where the characteristic dimension is given by the fibre tow diameter. In mesolevel analysis, liquid impregnation along two different scales; inside fibre tows and within the open spaces between them; must be considered and the coupling between these flow regimes must be addressed. In such case, it is extremely important to account correctly for the surface tension effects, which can be modelled as capillary pressure applied at the flow front. Numerical implementation of such boundary conditions leads to ill-posing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. This contribution presents a numerical procedure, which was formulated and implemented in the existing Free Boundary Program in order to significantly reduce this error.

Uma analise das alterações nas variáveis fisiológicas e aptidão física (teste da FIFA) e suas prováveis interferências no desempenho do arbitro durante a partida

Universidade Estadual de Campinas. Faculdade de Educação Física

Influence of specimens' design and manufacturing process on microtensile bond strength to enamel: laboratory and FEA comparison

This study evaluated the effect of specimens' design and manufacturing process on microtensile bond strength, internal stress distributions (Finite Element Analysis - FEA) and specimens' integrity by means of Scanning Electron Microscopy (SEM) and Laser Scanning Confocal Microscopy (LCM). Excite was applied to flat enamel surface and a resin composite build-ups were made incrementally with 1-mm increments of Tetric Ceram. Teeth were cut using a diamond disc or a diamond wire, obtaining 0.8 mm² stick-shaped specimens, or were shaped with a Micro Specimen Former, obtaining dumbbell-shaped specimens (n = 10). Samples were randomly selected for SEM and LCM analysis. Remaining samples underwent microtensile test, and results were analyzed with ANOVA and Tukey test. FEA dumbbell-shaped model resulted in a more homogeneous stress distribution. Nonetheless, they failed under lower bond strengths (21.83 ± 5.44 MPa)c than stick-shaped specimens (sectioned with wire: 42.93 ± 4.77 MPaª; sectioned with disc: 36.62 ± 3.63 MPa b), due to geometric irregularities related to manufacturing process, as noted in microscopic analyzes. It could be concluded that stick-shaped, nontrimmed specimens, sectioned with diamond wire, are preferred for enamel specimens as they can be prepared in a less destructive, easier, and more precise way.

A low cost method to produce a gaseous environment for the isolation of Helicobacter pylori

A low cost method (LCM) to produce a gaseous environment for the isolation of Helicobacter pylori, was compared with the standard Gas Park system. The LCM uses a carbonated antacid tablet, a plastic bag with tap water, a candle, and a wide-mouthed glass jar provided with a tight-fitting metalic screw cap and a rubber gasket. Antral gastric biopsies from 153 cases were incubated by duplicate on blood agar plates and treated with the two methods. In 95 cases the agent was isolated from both, and only from the standard method in 10 cases; the opposite condition was found in five cases, and 43 were negative. That difference is not significant (Pearson's X²= 93.25 p > 0,05)

The role of microRNAs in amyotrophic lateral sclerosis

Dissertação para obtenção do Grau de Mestre em Genética Molecular e Biomedicina

Urban sprawl analysis and modeling in Asmara, Eritreia: Application of Geospatial Tools

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Modelação do crescimento urbano da província de Luanda, Angola

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Ciência e Sistemas de Informação Geográfica

Uma proposta metodológica para a alteração da cartografia do plano de ordenamento da bacia hidrográfica da Lagoa das Furnas (São Miguel, Açores)

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Ciência e Sistemas de Informação Geográfica

Aspectos psicossociais e estigmatizantes da leishmaniose cutâneo-mucosa

Os autores selecionaram 15 pacientes portadores de leishmaniose cutâneo- mucosa (LCM) forma grave, onde buscaram, através de entrevista psicológica, conhecer aspectos da vida de cada um, antes de contrair a doença, no decorrer e após o tratamento. Concomitantemente, realizaram 25 entrevistas com a comunidade onde residem os pacientes, com a intenção de avaliar as reações da mesma ao doente com leishmaniose. Constataram que entre os pacientes entrevistados: 14(93,3%) referiram algum tipo de modificação no decorrer da doença; 11(73,3%) perceberam-se marginalizados; 9(60%) sentiram-se afastados do convívio da sociedade; 10(66,6%) tiveram dificuldade de retomar ao trabalho. Na comunidade, 11(44%) associam o portador da LCM a indivíduos que apresentam deformações no corpo, 8(32%) têm receio de contrair a doença pelo caráter destrutivo das lesões, 24(96%) referiram que os pacientes têm problemas de relacionamento social.

Land cover mapping analysis and urban growth modeling using remote sensing techniques

The rapid growth of big cities has been noticed since 1950s when the majority of world population turned to live in urban areas rather than villages, seeking better job opportunities and higher quality of services and lifestyle circumstances. This demographic transition from rural to urban is expected to have a continuous increase. Governments, especially in less developed countries, are going to face more challenges in different sectors, raising the essence of understanding the spatial pattern of the growth for an effective urban planning. The study aimed to detect, analyse and model the urban growth in Greater Cairo Region (GCR) as one of the fast growing mega cities in the world using remote sensing data. Knowing the current and estimated urbanization situation in GCR will help decision makers in Egypt to adjust their plans and develop new ones. These plans should focus on resources reallocation to overcome the problems arising in the future and to achieve a sustainable development of urban areas, especially after the high percentage of illegal settlements which took place in the last decades. The study focused on a period of 30 years; from 1984 to 2014, and the major transitions to urban were modelled to predict the future scenarios in 2025. Three satellite images of different time stamps (1984, 2003 and 2014) were classified using Support Vector Machines (SVM) classifier, then the land cover changes were detected by applying a high level mapping technique. Later the results were analyzed for higher accurate estimations of the urban growth in the future in 2025 using Land Change Modeler (LCM) embedded in IDRISI software. Moreover, the spatial and temporal urban growth patterns were analyzed using statistical metrics developed in FRAGSTATS software. The study resulted in an overall classification accuracy of 96%, 97.3% and 96.3% for 1984, 2003 and 2014’s map, respectively. Between 1984 and 2003, 19 179 hectares of vegetation and 21 417 hectares of desert changed to urban, while from 2003 to 2014, the transitions to urban from both land cover classes were found to be 16 486 and 31 045 hectares, respectively. The model results indicated that 14% of the vegetation and 4% of the desert in 2014 will turn into urban in 2025, representing 16 512 and 24 687 hectares, respectively.

Larvicidal effects of endophytic and basidiomycete fungus extracts on Aedes and Anopheles larvae (Diptera, Culicidae)

Introduction In vitro bioassays were performed to access the larvicidal activity of crude extracts from the endophytic fungus Pestalotiopsis virgulata (Melanconiales, Amphisphaeriaceae) and the saprophytic fungus Pycnoporus sanguineus (Basidiomycetes, Polyporaceae) against the mosquitoes Aedes aegypti and Anopheles nuneztovari. Methods The extracts were tested at concentrations of 100, 200, 300, 400 and 500ppm. Ethyl acetate mycelia (EAM) extracts and liquid culture media (LCM) from Pe. virgulata and Py. sanguineus were tested against third instar larvae of Ae. aegypti and An. nuneztovari. Results The larvicidal activity of the EAM extracts from Pe. virgulata against Ae. aegypti had an LC50=101.8ppm, and the extract from the basidiomycete fungus Py. sanguineus had an LC50=156.8ppm against the Ae. aegypti larvae. The Pe. virgulata extract had an LC50=16.3ppm against the An. nuneztovari larvae, and the Py. sanguineus extract had an LC50=87.2ppm against these larvae. Conclusions These results highlight the larvicidal effect of EAM extracts from the endophyte Pe. virgulata against the two larval mosquitoes tested. Thus, Pe. virgulata and Py. sanguineus have the potential for the production of bioactive substances against larvae of these two tropical disease vectors, with An. nuneztovari being more susceptible to these extracts.

Calibração de filtros de fator de transmissão regular em espectrofotometria

A garantia de exatidão e de precisão, assim como da reprodutibilidade, da repetibilidade e da produtividade dos processos de medição, tornaram-se metas da metrologia, visando desta forma uma garantia da qualidade de produtos e serviços. A presente dissertação foi desenvolvida no âmbito de estágio curricular realizado no Departamento de Metrologia (DMET) do Instituto Português da Qualidade (IPQ). O objetivo inicial do estágio visava a participação na calibração de espectrofotómetros. Entretanto, no decorrer do estágio, também foi possível elaborar uma proposta de melhoria aos procedimentos técnicos de calibração existentes na altura, para medições de fatores de transmissão regular, com dois instrumentos de medição de elevada qualidade. Esta proposta de melhoria integra-se na busca de melhoria contínua dos processos no Laboratório de Espectrofotometria (LE), pertencente ao Laboratório Central de Metrologia (LCM) do IPQ. Visando a rastreabilidade metrológica dos resultados obtidos, foi feita a adaptação dos procedimentos existentes. Para a calibração de ambos os espectrofotómetros, utilizaram-se filtros padrão de vidro de tamanho standard (33 mm x 10 mm) e de tamanho superior ao standard (50 mm x 50 mm) certificados pelo Laboratório Primário de Espectrofotometria do Instituto Nacional de Metrologia do Reino Unido, o National Physical Laboratory (NPL). Com o objetivo de otimização de tempo, procedeu-se também à comparação entre resultados obtidos de fator de transmissão para os materiais de referência de tamanho superior, quando corrigidos de acordo com a reta de calibração obtida com filtros padrão de tamanho idêntico, e quando corrigidos de acordo com a reta de calibração obtida com filtros padrão de tamanho standard. No decurso do estágio, surgiu ainda a oportunidade de aplicar a experiência obtida ao caso prático de um filtro de opacímetro fornecido pelo LabMetro do ISQ. Assim, na presente dissertação, apresentam-se também os resultados de medição de fator de transmissão, para esse filtro, obtidos com ambos os espectrofotómetros.

Micro- and mesoporous structures as drug delivery carriers for salicylic acid

The potential of salicylic acid (SA) encapsulated in porous materials as drug delivery carriers for cancer treatment was studied. Different porous structures, the microporous zeolite NaY, and the mesoporous SBA-15 and MCM-41 were used as hosts for the anti-inflammatory drug. Characterization with different techniques (FTIR, UV/vis, TGA, 1H NMR, and 13C CPMAS NMR) demonstrated the successful loading of SA into the porous hosts. The mesoporous structures showed to be very efficient to encapsulate the SA molecule. The obtained drug delivery systems (DDS) accommodated 0.74 mmol (341 mg/gZEO) in NaY and 1.07 mmol (493 mg/gZEO) to 1.23 mmol (566 mg/gZEO) for SBA-15 and MCM-41, respectively. Interactions between SA molecules and pore structures were identified. A fast and unrestricted liberation of SA at 10 min of the dissolution assay was achieved with 29.3, 46.6, and 50.1 µg/mL of SA from NaY, SBA-15, and MCM-41, respectively, in the in vitro drug release studies (PBS buffer pH 7.4, 37 °C). Kinetic modeling was used to determine the release patterns of the DDS. The porous structures and DDS were evaluated on Hs578T and MDA-MB-468 breast cancer cell lines viability. The porous structures are nontoxic to cancer cells. Cell viability reduction was only observed after the release of SA from MCM- 41 followed by SBA-15 in both breast cancer cell lines.

Optimization of low-cost nutritional supplementation for lignocellulosic ethanol fermentation

[Excerpt] Bioethanol from lignocellulosic materials (LCM), also called second generation bioethanol, is considered a promising alternative to first generation bioethanol. An efficient production process of lignocellulosic bioethanol involves an effective pretreatment of LCM to improve the accessibility of cellulose and thus enhance the enzymatic saccharification. One interesting approach is to use the whole slurry from treatment, since allows economical and industrial benefits: washing steps are avoided, water consumption is lower and the sugars from liquid phase can be used, increasing ethanol concentration [1]. However, during the pretreatment step some compounds (such as furans, phenolic compounds and weak acids) are produced. These compounds have an inhibitory effect on the microorganisms used for hydrolysate fermentation [2]. To overcome this, the use of a robust industrial strain together with agro-industrial by-products as nutritional supplementation was proposed to increase the ethanol productivities and yields. (...)