Catalogs of Michigan-based automobile companies.

Mode of access: Internet.

Estratégia de operações: reposicionando a ferramentaria da General Motors do Brasil

Trata do reposicionamento empresarial de um fornecedor interno de componentes vitais de veículos automotivos, onde existem divergências entre as maiores montadoras do mundo quanto a sua posição estratégica. A partir de um cenário global e da identificação do mapa de competências do processo atual, o objetivo é elaborar algumas alternativas estratégicas e/ou táticas para o reposicionamento que permita atender as novas necessidades competitivas

Requests by General Motors and Ford to reduce fuel economy standards for MY 1981-85 passenger automobiles. Report.

Mode of access: Internet.

Experimental safety vehicle (phase two) developed by General Motors. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Catalogs of Michigan-based motor truck companies.

Mode of access: Internet.

Rambler family album; a pictorial roll call of the passenger cars and trucks produced by American Motors and its predecessor companies: the original Rambler, Jeffery, Nash, Hudson, Lafayette, Ajax, Essex, Terraplane, Metropolitan, the modern Rambler.

Mode of access: Internet.

A critical analysis of organization planning at General Motors,

Includes bibliography.

Integrated magnetic components for high-power high-current dc-dc converters

This thesis is focused on the design and development of an integrated magnetic (IM) structure for use in high-power high-current power converters employed in renewable energy applications. These applications require low-cost, high efficiency and high-power density magnetic components and the use of IM structures can help achieve this goal. A novel CCTT-core split-winding integrated magnetic (CCTT IM) is presented in this thesis. This IM is optimized for use in high-power dc-dc converters. The CCTT IM design is an evolution of the traditional EE-core integrated magnetic (EE IM). The CCTT IM structure uses a split-winding configuration allowing for the reduction of external leakage inductance, which is a problem for many traditional IM designs, such as the EE IM. Magnetic poles are incorporated to help shape and contain the leakage flux within the core window. These magnetic poles have the added benefit of minimizing the winding power loss due to the airgap fringing flux as they shape the fringing flux away from the split-windings. A CCTT IM reluctance model is developed which uses fringing equations to accurately predict the most probable regions of fringing flux around the pole and winding sections of the device. This helps in the development of a more accurate model as it predicts the dc and ac inductance of the component. A CCTT IM design algorithm is developed which relies heavily on the reluctance model of the CCTT IM. The design algorithm is implemented using the mathematical software tool Mathematica. This algorithm is modular in structure and allows for the quick and easy design and prototyping of the CCTT IM. The algorithm allows for the investigation of the CCTT IM boxed volume with the variation of input current ripple, for different power ranges, magnetic materials and frequencies. A high-power 72 kW CCTT IM prototype is designed and developed for use in an automotive fuelcell-based drivetrain. The CCTT IM design algorithm is initially used to design the component while 3D and 2D finite element analysis (FEA) software is used to optimize the design. Low-cost and low-power loss ferrite 3C92 is used for its construction, and when combined with a low number of turns results in a very efficient design. A paper analysis is undertaken which compares the performance of the high-power CCTT IM design with that of two discrete inductors used in a two-phase (2L) interleaved converter. The 2L option consists of two discrete inductors constructed from high dc-bias material. Both topologies are designed for the same worst-case phase current ripple conditions and this ensures a like-for-like comparison. The comparison indicates that the total magnetic component boxed volume of both converters is similar while the CCTT IM has significantly lower power loss. Experimental results for the 72 kW, (155 V dc, 465 A dc input, 420 V dc output) prototype validate the CCTT IM concept where the component is shown to be 99.7 % efficient. The high-power experimental testing was conducted at General Motors advanced technology center in Torrence, Los Angeles. Calorific testing was used to determine the power loss in the CCTT IM component. Experimental 3.8 kW results and a 3.8 kW prototype compare and contrast the ferrite CCTT IM and high dc-bias 2L concepts over the typical operating range of a fuelcell under like-for-like conditions. The CCTT IM is shown to perform better than the 2L option over the entire power range. An 8 kW ferrite CCTT IM prototype is developed for use in photovoltaic (PV) applications. The CCTT IM is used in a boost pre-regulator as part of the PV power stage. The CCTT IM is compared with an industry standard 2L converter consisting of two discrete ferrite toroidal inductors. The magnetic components are compared for the same worst-case phase current ripple and the experimental testing is conducted over the operation of a PV panel. The prototype CCTT IM allows for a 50 % reduction in total boxed volume and mass in comparison to the baseline 2L option, while showing increased efficiency.

Resonant power conversion topologies for inductive charging of electrical vehicle batteries

This thesis is concerned with inductive charging of electric vehicle batteries. Rectified power form the 50/60 Hz utility feeds a dc-ac converter which delivers high-frequency ac power to the electric vehicle inductive coupling inlet. The inlet configuration has been defined by the Society of Automotive Engineers in Recommended Practice J-1773. This thesis studies converter topologies related to the series resonant converter. When coupled to the vehicle inlet, the frequency-controlled series-resonant converter results in a capacitively-filtered series-parallel LCLC (SP-LCLC) resonant converter topology with zero voltage switching and many other desirable features. A novel time-domain transformation analysis, termed Modal Analysis, is developed, using a state variable transformation, to analyze and characterize this multi-resonant fourth-orderconverter. Next, Fundamental Mode Approximation (FMA) Analysis, based on a voltage-source model of the load, and its novel extension, Rectifier-Compensated FMA (RCFMA) Analysis, are developed and applied to the SP-LCLC converter. The RCFMA Analysis is a simpler and more intuitive analysis than the Modal Analysis, and provides a relatively accurate closed-form solution for the converter behavior. Phase control of the SP-LCLC converter is investigated as a control option. FMA and RCFMA Analyses are used for detailed characterization. The analyses identify areas of operation, which are also validated experimentally, where it is advantageous to phase control the converter. A novel hybrid control scheme is proposed which integrates frequency and phase control and achieves reduced operating frequency range and improved partial-load efficiency. The phase-controlled SP-LCLC converter can also be configured with a parallel load and is an excellent option for the application. The resulting topology implements soft-switching over the entire load range and has high full-load and partial-load efficiencies. RCFMA Analysis is used to analyze and characterize the new converter topology, and good correlation is shown with experimental results. Finally, a novel single-stage power-factor-corrected ac-dc converter is introduced, which uses the current-source characteristic of the SP-LCLC topology to provide power factor correction over a wide output power range from zero to full load. This converter exhibits all the advantageous characteristics of its dc-dc counterpart, with a reduced parts count and cost. Simulation and experimental results verify the operation of the new converter.

Magnetic materials and soft-switched topologies for high-current DC-DC converters

The thesis is focused on the magnetic materials comparison and selection for high-power non-isolated dc-dc converters for industrial applications or electric, hybrid and fuel cell vehicles. The application of high-frequency bi-directional soft-switched dc-dc converters is also investigated. The thesis initially outlines the motivation for an energy-efficient transportation system with minimum environmental impact and reduced dependence on exhaustible resources. This is followed by a general overview of the power system architectures for electric, hybrid and fuel cell vehicles. The vehicle power sources and general dc-dc converter topologies are discussed. The dc-dc converter components are discussed with emphasis on recent semiconductor advances. A novel bi-directional soft-switched dc-dc converter with an auxiliary cell is introduced in this thesis. The soft-switching cell allows for the MOSFET's intrinsic body diode to operate in a half-bridge without reduced efficiency. The converter's mode-by-mode operation is analysed and closed-form expressions are presented for the average current gain of the converter. The design issues are presented and circuit limitations are discussed. Magnetic materials for the main dc-dc converter inductor are compared and contrasted. Novel magnetic material comparisons are introduced, which include the material dc bias capability and thermal conductivity. An inductor design algorithm is developed and used to compare the various magnetic materials for the application. The area-product analysis is presented for the minimum inductor size and highlights the optimum magnetic materials. Finally, the high-flux magnetic materials are experimentally compared. The practical effects of frequency, dc-bias, and converters duty-cycle effect for arbitrary shapes of flux density, air gap effects on core and winding, the winding shielding effect, and thermal configuration are investigated. The thesis results have been documented at IEEE EPE conference in 2007 and 2008, IEEE APEC in 2009 and 2010, and IEEE VPPC in 2010. A 2011 journal has been approved by IEEE Transactions on Power Electronics.

High-current inductors for high-power automotive DC-DC converters

This thesis is focused on the investigation of magnetic materials for high-power dcdc converters in hybrid and fuel cell vehicles and the development of an optimized high-power inductor for a multi-phase converter. The thesis introduces the power system architectures for hybrid and fuel cell vehicles. The requirements for power electronic converters are established and the dc-dc converter topologies of interest are introduced. A compact and efficient inductor is critical to reduce the overall cost, weight and volume of the dc-dc converter and optimize vehicle driving range and traction power. Firstly, materials suitable for a gapped CC-core inductor are analyzed and investigated. A novel inductor-design algorithm is developed and automated in order to compare and contrast the various magnetic materials over a range of frequencies and ripple ratios. The algorithm is developed for foil-wound inductors with gapped CC-cores in the low (10 kHz) to medium (30 kHz) frequency range and investigates the materials in a natural-convection-cooled environment. The practical effects of frequency, ripple, air-gap fringing, and thermal configuration are investigated next for the iron-based amorphous metal and 6.5 % silicon steel materials. A 2.5 kW converter is built to verify the optimum material selection and thermal configuration over the frequency range and ripple ratios of interest. Inductor size can increase in both of these laminated materials due to increased airgap fringing losses. Distributing the airgap is demonstrated to reduce the inductor losses and size but has practical limitations for iron-based amorphous metal cores. The effects of the manufacturing process are shown to degrade the iron-based amorphous metal multi-cut core loss. The experimental results also suggest that gap loss is not a significant consideration in these experiments. The predicted losses by the equation developed by Reuben Lee and cited by Colonel McLyman are significantly higher than the experimental results suggest. Iron-based amorphous metal has better preformance than 6.5 % silicon steel when a single cut core and natural-convection-cooling are used. Conduction cooling, rather than natural convection, can result in the highest power density inductor. The cooling for these laminated materials is very dependent on the direction of the lamination and the component mounting. Experimental results are produced showing the effects of lamination direction on the cooling path. A significant temperature reduction is demonstrated for conduction cooling versus natural-convection cooling. Iron-based amorphous metal and 6.5% silicon steel are competitive materials when conduction cooled. A novel inductor design algorithm is developed for foil-wound inductors with gapped CC-cores for conduction cooling of core and copper. Again, conduction cooling, rather than natural convection, is shown to reduce the size and weight of the inductor. The weight of the 6.5 % silicon steel inductor is reduced by around a factor of ten compared to natural-convection cooling due to the high thermal conductivity of the material. The conduction cooling algorithm is used to develop high-power custom inductors for use in a high power multi-phase boost converter. Finally, a high power digitally-controlled multi-phase boost converter system is designed and constructed to test the high-power inductors. The performance of the inductors is compared to the predictions used in the design process and very good correlation is achieved. The thesis results have been documented at IEEE APEC, PESC and IAS conferences in 2007 and at the IEEE EPE conference in 2008.

Estrategias para reducir el nivel de contaminanción fisíca en la planta de producción de Pelpak S.A

Este proyecto busca analizar y formular estrategias que permitan reducir la contaminación física por partículas en la planta de producción de la empresa Pelpak S.A. generando una solución que perdure en el tiempo en la medida que se controla, verifica, mantiene e involucra a los procesos organizacionales. Para ello se plantean una serie de estrategias acordes a las necesidades de la empresa a partir de sus características de infraestructura, equipos y planta de producción teniendo como fundamentación teórica la Norma AIB Internacional con atención específica en los apartes que sean relevantes para cumplir con el proyecto. En la formulación de las estrategias, es fundamental garantizar la protección del envase en las etapas de mayor vulnerabilidad relacionada con la exposición a fuentes contaminantes. El alcance de este proyecto abarca la reducción de los cuerpos extraños en la planta, pues estos generan contaminación en el proceso productivo. Para lograr este resultado, se debe determinar el porqué, quiénes, en dónde y cómo se generan los elementos nocivos con el fin de eliminar, mitigar o controlar esta problemática. Esta investigación arrojó ocho estrategias a tratar, en donde el objetivo de cada una es mejorar el entorno en el cual se trabaja, evitar que el envase se contamine y lograr proteger el envase en las etapas del proceso con la identificación de los puntos críticos. El aseo y limpieza para los techos, pisos y paredes es el común denominador de las estrategias planteadas en este estudio.

Innovación de un nuevo sistema de gestión empresarial aplicación e implementación nuevo software a nivel nacional METROKIA S.A.

Kia Motors Corporation (KMC) tiene como objetivo desde hace algunos años, la creación e implementación de una solución de negocios enfocada en una gestión empresarial estandarizada a todos los distribuidores de Kia a nivel latinoamericano: Colombia, Perú, Ecuador y Chile. El proceso actual con el que cuentan los distribuidores en América Latina con sus concesionarios es enviar toda la información relacionada con los estatutos financieros a través de correo electrónico junto con una base de datos física, la cual se va archivando. El proceso es manual siendo de mucha dedicación y tiempo requerido para cumplir con las funciones pedidas. El enfoque actual de este proceso es claro: analizar el desempeño y rendimiento de cada uno de los concesionarios de la red junto con la identificación de oportunidades para mejorar. KMC junto con todos sus distribuidores están interesados en buscar un sistema de gestión empresarial sencillo, adecuado y de fácil manejo que permitirá únicamente a todos los concesionarios presentar sus estados de cuenta y desarrollo de una manera estandarizada a su distribuidor directamente. Entonces, el sistema deseado debe ser capaz de generar resultados basándose en lo comunicado por los distribuidores y proporcionar un conjunto de características bajo una adecuada funcionalidad para permitir a todos los usuarios de la red (concesionarios, distribuidores y KMC) analizar el rendimiento y desempeño de la empresa e identificar las áreas que requieren una mejora. En el siguiente documento, podremos ver el desarrollo que ha tenido METROKIA S.A para la creación y aplicación de una herramienta tecnológica (software) enfocada en lo mencionado anteriormente. Ha sido un proceso de varias etapas en donde tanto las variables como los indicadores de desempeño han tenido correcciones con el fin de poder ser leídos y entendidos fácilmente por toda la organización y red de concesionarios afiliados.