Avaliação do tempo de trânsito esofágico de formas farmacêuticas sólidas pela cintilografia e biosusceptometria AC

Pós-graduação em Biologia Geral e Aplicada - IBB

Implementação e qualificação de uma área de embalagem de formas farmacêuticas sólidas

Poster apresentado no Congresso Nacional dos Farmacêuticos’2015. Centro de Congressos de Lisboa, 29-31 Outubro 2015

Determinação de parâmetros de qualidade para formas farmacêuticas homeopáticas

All medicine, whether allopathic or homeopathic, must go through strict quality control, which must ratify their characteristics throughout the period of validity. During the time of preparation and storage, solutions of the drugs are in permanent contact with packaging materials that can release undesirable substances to the solution. Several factors may influence the release of packing materials, and factorial design (FD) is a useful tool for analyzing the phenomenon. The aim of this study was the determination of quality parameters for Homeopathic solid (globules) and liquid (drops) dosage forms. It was carried out analysis in homeopathic globules for weight variation, mechanical strength, and moisture content uniformity. For liquid preparations, standard solutions were prepared from natural rubber bulbs, which were subjected to exhaustive extraction with two ethanol solutions (30 and 70%) in the ultrasonic bath for 20 minutes at 25°C and 50°C in three successive cycles. Studies of transfer have been made within five days, by spectrophotometric analysis in the UV region at 312 nm with λmáx and 323 nm for samples in 70% ethanol and 30% respectively. PH values were analyzed. We also conducted two FD studies, where the first, the three-level variables were solvent (chloroform, ethanol and nhexane), sample mass (30, 60 and 90mg), particle size (large disk, small disk and powder sample). In the second study, the solvent level variables were different ethanolic degrees (EtOH 30%, 70% and pure). The percentage of lending in the solutions was 5.5%, 12.4%, 24.2% and 41% of the total estimated in the reference solution. The values of rate constants of transfer were determined in the order of 0.0134 days-1 and 0.0232 days-1 in absorbance values, the solutions in ethanol at 30% and 70% respectively. These results suggest that the speed of transfer of materials from rubber is affected both by the nature of the vehicle as by the temperature

Avaliação da argila atapulgita para potencial uso como excipiente farmacêutico em formas sólidas

Clays are natural materials that have great potential for use as excipients for solid dosage forms. Palygorskite is a type of clay that has hydrophilic properties as well as a large surface area, which could contribute to the dissolution of drugs. Thus, the present study aims to evaluate the use of palygorskite clay, from Piaui (Northeast region of Brazil), as a pharmaceutical excipient for solid dosage forms, using rifampicin and isoniazid as the model drugs. The former is a poorly soluble drug often associated with isoniazid for tuberculosis treatment. Palygorskite was characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and specific surface area (BET). The rheological and technological properties of palygorskite were determined and compared to those of talc, magnesium stearate and Aersosil 200. Mixtures between drugs and palygorskite were analyzed by differential scanning calorimetry (DSC), thermogravimetric analysis (TG) combined with thermal analysis (DTA) and Fourier Transform Infrared Spectroscopy (FT-IR), where the results were compared with those of the individual compounds. In addition, dissolution studies of solid dispersions and capsules containing the drugs, mixed with either palygorskite or a mixture of talc and magnesium stearate, were performed. The results showed that palygorskite has small particles with a high surface area. Its rheological characteristics were better than those of others commonly used glidants and lubricants. There was no interaction between palygorskite and the drugs (rifampicin and isoniazid). Among the dispersions studied, the mixture with palygorskite (5%) showed the highest drug dissolution when compared to other excipients. The dissolution of the rifampicin capsules containing palygosrkite was faster in higher concentrations. However, these differences were statistically different only in the first minutes of the dissolution experiment. The dissolution profile of isoniazid was also statistically different on the initial part of the experiment. The formulations prepared with isoniazid and palygorskite showed higher drug dissolution, but it was in descending order of concentration. According to these results, the palygorskite clay used in this study has great potential for application as an excipient for solid dosage forms

Medicamentos pediátricos: novas formas farmacêuticas, formulações e dispositivos

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Controlo de qualidade de formas farmacêuticas estéreis

Com o avanço da tecnologia cada vez mais acessível, torna-se imprescindível acompanhar este mesmo desenvolvimento e adotá-lo para a obtenção de um melhor produto. Sendo as formas farmacêuticas estéreis alvo de uma rigorosa avaliação dos seus requisitos, é uma grande vantagem conhecer quais as orientações atuais para o fabrico destes produtos. Uma vez que estamos na era da “aldeia global”, é inquestionável a necessidade de conhecer documentos de outros países, isto porque na indústria farmacêutica, tal como em muitas outras, há o objetivo de expandir a comercialização de produtos para outros países, continentes, mas há que ter em atenção que para esses países os requisitos de qualidade desses produtos podem não ser iguais aos do nosso país. Ao conhecer e aplicar os principais e mais rígidos controlos e normas, é certo que todos os outros serão cumpridos. Como principais documentos que regulam e orientam o processo de fabrico destes produtos existem as Good Manufacturing Practices, as normas da Internactional Standardization Organization e as Farmacopeias de vários países. Na indústria farmacêutica, principalmente no fabrico das formas farmacêuticas estéreis, há controlo não só do processo de fabrico e produto final, como também de todo o ambiente e intervenientes que envolvem a produção. Dentro das formas farmacêuticas em estudo encontram-se as de uso oftálmico, de aplicação nasal, de aplicação auricular e de uso parenteral. Todas estas têm o principal requisito de ser estéreis, variando nos outros parâmetros, como tonicidade e pH de acordo com a localização da administração. Os ensaios realizados tanto em In Process Control como no produto final, estão presentes nas Farmacopeias, que serão discutidos e comparados entre si.

Estudo de pré-formulação com o composto polifenólico quercetina

As ferramentas termo-analíticas, tais como a calorimetria exploratória diferencial (DSC) e a análise termogravimétrica (TGA), são os métodos usualmente utilizados para a verificação preliminar acerca da existência de interações entre fármacos e adjuvantes. Neste trabalho, foram verificados a equivalência entre a quercetina, empregada como matéria-prima, e a quercetina referência, seus comportamentos térmicos e a possível existência de interações entre esta substância e adjuvantes tecnológicos usualmente empregados no desenvolvimento de formas farmacêuticas sólidas e semi-sólidas. A evidência de interações foi investigada por análise de misturas físicas binárias sólidas da quercetina e o adjuvante. Os adjuvantes utilizados foram o ácido esteárico, álcool estearílico, celulose microcristalina, croscarmelose sódica, dióxido de silício coloidal, estearato de magnésio, lactose, manitol, monoestearato de glicerila, polissorbato 80, povidona, propilenoglicol, talco e vaselina sólida. A influência do processo de secagem por aspersão sobre as características da quercetina isolada e em presença do adjuvante de secagem dióxido de silício coloidal também foi avaliada. Os perfis espectroscópicos e cromatográficos das duas amostras de quercetina foram sobreponíveis, enquanto que o comportamento térmico da quercetina matéria-prima, obtido por DSC, não se mostrou equivalente ao da referência, pressupondo diferentes forma de cristalização ou solvatação. Para as misturas físicas, apenas aquelas contendo estearato de magnésio e lactose apresentaram indícios de interação verificados por DSC e confirmados por TGA, mas não ratificados por espectroscopia no infravermelho. O processo de secagem por aspersão modificou o perfil térmico da quercetina, enquanto o produto seco por aspersão contendo adjuvante de secagem apresentou resultados semelhantes aos obtidos para a mistura física com as mesmas substâncias.

Emprego de redes neurais artificiais supervisionadas e não supervisionadas no estudo de parâmetros reológicos de excipientes farmacêuticos sólidos

In this paper artificial neural network (ANN) based on supervised and unsupervised algorithms were investigated for use in the study of rheological parameters of solid pharmaceutical excipients, in order to develop computational tools for manufacturing solid dosage forms. Among four supervised neural networks investigated, the best learning performance was achieved by a feedfoward multilayer perceptron whose architectures was composed by eight neurons in the input layer, sixteen neurons in the hidden layer and one neuron in the output layer. Learning and predictive performance relative to repose angle was poor while to Carr index and Hausner ratio (CI and HR, respectively) showed very good fitting capacity and learning, therefore HR and CI were considered suitable descriptors for the next stage of development of supervised ANNs. Clustering capacity was evaluated for five unsupervised strategies. Network based on purely unsupervised competitive strategies, classic "Winner-Take-All", "Frequency-Sensitive Competitive Learning" and "Rival-Penalize Competitive Learning" (WTA, FSCL and RPCL, respectively) were able to perform clustering from database, however this classification was very poor, showing severe classification errors by grouping data with conflicting properties into the same cluster or even the same neuron. On the other hand it could not be established what was the criteria adopted by the neural network for those clustering. Self-Organizing Maps (SOM) and Neural Gas (NG) networks showed better clustering capacity. Both have recognized the two major groupings of data corresponding to lactose (LAC) and cellulose (CEL). However, SOM showed some errors in classify data from minority excipients, magnesium stearate (EMG) , talc (TLC) and attapulgite (ATP). NG network in turn performed a very consistent classification of data and solve the misclassification of SOM, being the most appropriate network for classifying data of the study. The use of NG network in pharmaceutical technology was still unpublished. NG therefore has great potential for use in the development of software for use in automated classification systems of pharmaceutical powders and as a new tool for mining and clustering data in drug development

Estudo de perfil de dissolução dos medicamentos de referência, genérico e similar contendo cefalexina na forma farmacêutica cápsula

With recent advances in technology and research into drug delivery, the modernization of tests and greater emphasis on the predictability of therapeutic effect by means of in vitro tests, the dissolution test and the study of dissolution profiles are gaining more and more importance. Though introduced initially as a way of characterizing the release profile of poorly soluble drugs, dissolution tests are currently part of pharmacopoeial monographs on almost all the oral solid pharmaceutical forms. The objective of this study was to determine the dissolution profile (percent drug dissolved versus time) of the pioneer brand, generic and similar pharmaceutical capsules containing 500mg cephalexin. Three pharmaceutical brands (reference, generic and similar) were subjected to the dissolution test and in vitro dissolution profiles were recorded. From the results of the dissolution test, it was concluded that the samples met the acceptance criterion, as no difference was observed in the percentage of the drug dissolved in a standard time. The dissolution profile indicated that this medicine, in this pharmaceutical form, dissolves readily (85% of the drug dissolved in 15 minutes) and the curves showed great similarity, suggesting that the 3 brands are pharmaceutically equivalent.

A ressonância magnética no estudo da desintegração de comprimidos marcados com açaí (Euterpe oleracea)

Pós-graduação em Biologia Geral e Aplicada - IBB

Estudo multi-instrumental do processo de desintegração de comprimidos envolvendo três classes de desintegrantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Obtenção e caracterização de filmes de misturas de amido resistence e pectina como estratégia para liberação cólon específica de fármacos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização físico-química de galactomananas de Adenanthera pavonina (Carolina) e Delonix regia (Flamboyant) reticuladas com trimetafosfato de sódio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Farmacomagnetografia colônia: estudo in vitro da desintegração de comprimidos magnéticos revestidos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A biosusceptometria AC aplicada à tecnologia farmacêutica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)