Success and failure factors of shared services : an IS literature analysis

Organizations seeking improvements in their performance are increasingly exploring alternative models and approaches for providing support services; one such approach being Shared Services. Because of the possible consequential impact of Shared Services on organizations, and given that information systems (IS) is both an enabler of Shared Services (for other functional areas) as well as a promising area for Shared Services application, Shared Services is an important area for research in the IS field. Though Shared Services has been extensively adopted on the promise of economies of scale and scope, factors of Shared Services success (or failure) have received little research attention. This paper reports the distillation of success and failure factors of Shared Services from an IS perspective. Employing NVIVO and content analysis of 158 selected articles, 9 key success factors and 5 failure factors are identified, suggesting important implications for practice and further research.

Identification of success and failure factors for technology transfer in biotechnology: case studies and surveys from Academic Sinica in Taiwan

Academia Sinica is the leading research institute in Taiwan founded in 1928. Its Office of Technology Transfer (OTT) was established in 1998. It made great efforts to dramatically turn around the technology transfer activity of Academia Sinica, especially in biotechnology. Academia Sinica has more than 80 cases of experience in biotechnology transfer with companies in Taiwanese industry in the past five years. The purpose of this study is to identify potential success and failure factors for biotechnology transfer in Taiwan. Eight cases were studied through in-depth interview. The results of the analysis were used to design two surveys to further investigate 81 cases (48 successful and 33 failure cases) of biotechnology transfer in Academia Sinica from 1999–2003. The results indicated that 10 of the 14 success factors were cited in more than 40% of the cases as contributing to the success of technology transfer. By contrast, only 5 out of 16 key factors were present in more than 30% of the failure cases.

Risk modelling in quality clinical registries : Monitoring lesion treatment failure rate in percutaneous coronary interventions

Aims: This paper describes the development of a risk adjustment (RA) model predictive of individual lesion treatment failure in percutaneous coronary interventions (PCI) for use in a quality monitoring and improvement program. Methods and results: Prospectively collected data for 3972 consecutive revascularisation procedures (5601 lesions) performed between January 2003 and September 2011 were studied. Data on procedures to September 2009 (n = 3100) were used to identify factors predictive of lesion treatment failure. Factors identified included lesion risk class (p < 0.001), occlusion type (p < 0.001), patient age (p = 0.001), vessel system (p < 0.04), vessel diameter (p < 0.001), unstable angina (p = 0.003) and presence of major cardiac risk factors (p = 0.01). A Bayesian RA model was built using these factors with predictive performance of the model tested on the remaining procedures (area under the receiver operating curve: 0.765, Hosmer–Lemeshow p value: 0.11). Cumulative sum, exponentially weighted moving average and funnel plots were constructed using the RA model and subjectively evaluated. Conclusion: A RA model was developed and applied to SPC monitoring for lesion failure in a PCI database. If linked to appropriate quality improvement governance response protocols, SPC using this RA tool might improve quality control and risk management by identifying variation in performance based on a comparison of observed and expected outcomes.

Monitoring the Performance of Complex Projects from Multiple Perspectives over Multiple Time Frames

When complex projects go wrong they can go horribly wrong with severe financial consequences. We are undertaking research to develop leading performance indicators for complex projects, metrics to provide early warning of potential difficulties. The assessment of success of complex projects can be made by a range of stakeholders over different time scales, against different levels of project results: the project’s outputs at the end of the project; the project’s outcomes in the months following project completion; and the project’s impact in the years following completion. We aim to identify leading performance indicators, which may include both success criteria and success factors, and which can be measured by the project team during project delivery to forecast success as assessed by key stakeholders in the days, months and years following the project. The hope is the leading performance indicators will act as alarm bells to show if a project is diverting from plan so early corrective action can be taken. It may be that different combinations of the leading performance indicators will be appropriate depending on the nature of project complexity. In this paper we develop a new model of project success, whereby success is assessed by different stakeholders over different time frames against different levels of project results. We then relate this to measurements that can be taken during project delivery. A methodology is described to evaluate the early parts of this model. Its implications and limitations are described. This paper describes work in progress.

Semantic modeling method for configurable enterprise information systems

Business practices vary from one company to another and business practices often need to be changed due to changes of business environments. To satisfy different business practices, enterprise systems need to be customized. To keep up with ongoing business practice changes, enterprise systems need to be adapted. Because of rigidity and complexity, the customization and adaption of enterprise systems often takes excessive time with potential failures and budget shortfall. Moreover, enterprise systems often drag business behind because they cannot be rapidly adapted to support business practice changes. Extensive literature has addressed this issue by identifying success or failure factors, implementation approaches, and project management strategies. Those efforts were aimed at learning lessons from post implementation experiences to help future projects. This research looks into this issue from a different angle. It attempts to address this issue by delivering a systematic method for developing flexible enterprise systems which can be easily tailored for different business practices or rapidly adapted when business practices change. First, this research examines the role of system models in the context of enterprise system development; and the relationship of system models with software programs in the contexts of computer aided software engineering (CASE), model driven architecture (MDA) and workflow management system (WfMS). Then, by applying the analogical reasoning method, this research initiates a concept of model driven enterprise systems. The novelty of model driven enterprise systems is that it extracts system models from software programs and makes system models able to stay independent of software programs. In the paradigm of model driven enterprise systems, system models act as instructors to guide and control the behavior of software programs. Software programs function by interpreting instructions in system models. This mechanism exposes the opportunity to tailor such a system by changing system models. To make this true, system models should be represented in a language which can be easily understood by human beings and can also be effectively interpreted by computers. In this research, various semantic representations are investigated to support model driven enterprise systems. The significance of this research is 1) the transplantation of the successful structure for flexibility in modern machines and WfMS to enterprise systems; and 2) the advancement of MDA by extending the role of system models from guiding system development to controlling system behaviors. This research contributes to the area relevant to enterprise systems from three perspectives: 1) a new paradigm of enterprise systems, in which enterprise systems consist of two essential elements: system models and software programs. These two elements are loosely coupled and can exist independently; 2) semantic representations, which can effectively represent business entities, entity relationships, business logic and information processing logic in a semantic manner. Semantic representations are the key enabling techniques of model driven enterprise systems; and 3) a brand new role of system models; traditionally the role of system models is to guide developers to write system source code. This research promotes the role of system models to control the behaviors of enterprise.

Forecasting success on large projects : developing reliable scales to predict multiple perspectives by multiple stakeholders over multiple time frames

Our aim is to develop a set of leading performance indicators to enable managers of large projects to forecast during project execution how various stakeholders will perceive success months or even years into the operation of the output. Large projects have many stakeholders who have different objectives for the project, its output, and the business objectives they will deliver. The output of a large project may have a lifetime that lasts for years, or even decades, and ultimate impacts that go beyond its immediate operation. How different stakeholders perceive success can change with time, and so the project manager needs leading performance indicators that go beyond the traditional triple constraint to forecast how key stakeholders will perceive success months or even years later. In this article, we develop a model for project success that identifies how project stakeholders might perceive success in the months and years following a project. We identify success or failure factors that will facilitate or mitigate against achievement of those success criteria, and a set of potential leading performance indicators that forecast how stakeholders will perceive success during the life of the project's output. We conducted a scale development study with 152 managers of large projects and identified two project success factor scales and seven stakeholder satisfaction scales that can be used by project managers to predict stakeholder satisfaction on projects and so may be used by the managers of large projects for the basis of project control.

Eskola Porrota. Hezitzaileen begirada.

[eus] Eskola Porrota kaltegarria da ez bakarrik jasotzen duten familientzat, gizarte osoarentzat baizik. Kezkagarria da gure eskolak ikasle guztien heziketa egokia ziurtatzeko kapazak ez izatea. Irakasleok ez badugu gure ikasle guztien arrakasta lortzeko baliabiderik, gure ahalegin guztiak alferrikako lana bihurtuko dira. Lan honetan, informazioaren bilketa egin da eta analisiaren bidez, Eskola Porrotaren esangura argitu nahi izan da, diziplinarteko ikuspuntu batetik: bere faktoreak, arrazoiak eta ondorioak identifikatzen dira, egoeraren azterketa bat egiten da eta irakasleentzat Eskola Porrota garaiz aurreikusteko eta saihesteko jarraibidea ere proposatzen da.

A informação contabilística no processo de tomada de decisão de microempresas

A globalização, o desenvolvimento económico e o aumento da competitividade, possibilitaram um acréscimo do número de microempresas, originado o aumento do peso que estas detêm na economia. Estas absorvem a maioria da mão-de-obra do setor privado e criam parte significativa da riqueza de um país, no entanto, apresentam elevados índices de dissolução e liquidação, pondo em causa o desenvolvimento sustentável das economias onde estão sediadas. A informação contabilística é essencial em qualquer tipo de organização. Para as microempresas a utilização da informação contabilística no processo de tomada de decisão determina a diferença entre sucesso e o insucesso do empreendimento, no entanto, este tipo de informação continua a ser menosprezado pela gerência das microempresas. É assim importante estudar os fatores que limitam a utilização da informação contabilística no processo de tomada de decisão de microempresas e investigar a sua relação com os fatores de insucesso deste tipo de entidades. Nesta investigação para se atingirem os objetivos propostos considera-se adequado a adoção de uma metodologia de natureza quantitativa, assente num inquérito dirigido aos Contabilistas Certificados. Através da investigação demonstrou-se a importância que a informação contabilística detém no processo de tomada de decisão das microempresas Portuguesas. Constatou-se que os gerentes limitam a utilização deste tipo de informação, uma vez que não têm capacidade para interpretar a informação contabilística, nem reconhecem os benefícios inerentes à sua utilização nas decisões empresariais. Confirmou-se ainda que existe uma relação positiva entre os fatores de insucesso e os fatores que limitam a utilização da informação contabilística no processo de tomada de decisão de microempresas.

Análisis de los factores de éxito y fracaso del control social a la gestión pública estatal. Estudio de caso: la experiencia de la Red ciudadana de control social en Bienestar –componente discapacidad en Bogotá D.C

La presente monografía examina los alcances reales del Control Social a la Gestión Pública estatal desde el análisis de factores de éxito y fracaso, tomando como caso de estudio a la Red ciudadana de control social en Bienestar – componente discapacidad en Bogotá D.C. Este tipo de control fue concebido en marco normativo del país para prevenir actos corruptos y para que contribuyera al mejoramiento de la administración pública, haciéndola más acorde a las necesidades de la ciudadanía. Ahora bien, por lo que implica cumplir estas funciones, el control social se enfrenta a múltiples circunstancias que lo influyen positiva y negativamente, que determinan los efectos que pueda producir a nivel estatal y ciudadano. Para cumplir con este objetivo y a la luz del Enfoque Sistémico, se diseñó un modelo que permitiera identificar factores de éxito y fracaso basado en tres elementos básicos (organización, conocimiento y comunicación) que posibilitan caracterizar factores reconocidos en la bibliografía y otros nuevos que los provee el análisis de la experiencia, y que resultan hallazgos importantes por cuanto no se habían incluido hasta el momento en ningún recurso bibliográfico. En conclusión, se demuestra que mediante ciertas prácticas y acciones concretas los ciudadanos pueden incidir lícitamente en las actividades estatales, transformando la gestión pública y produciendo una mayor apropiación de lo público por parte de los ciudadanos.

Fatores de sucesso ou insucesso do turismo ambientalmente sustentável : percepção das autoridades públicas no pólo costa das dunas do Rio Grande do Norte

This study aims to compare the thermal performance of tiles made from recycled material (waste packaging cardboard with aluminized film) with the tiles of fiber and bitumen, fiber cement and red ceramic with the aim of verifying the suitability of tile to be used in hot and humid climate of low latitude. The samples were selected according to the availability from Natal RN market, as they are sold to the consumers. The methodology was based on studies that used experimental apparatus composed of thermal chambers heated by banks of incandescent bulbs, to analyze the thermal performance of materials. The tiles in the study were submitted to analysis of thermal performance, thermophysical properties and absorptance, using chambers of thermal performance, measuring the thermophysical properties and portable spectrometer, respectively. Comparative analysis of thermal performance between two samples of the recycled material with dimple sizes and different amounts of aluminum were made, in order to verify, if these characteristics had some interference on the thermal performance of them; the results showed no significant performance differences between the samples. The data obtained in chambers of thermal performance and confirmed by statistical analysis, showed, that the tile of recycled material have similar thermal performance to the tile of fiber cement. In addition to these tests was carried out the automatic monitoring of a building covered with tiles of recycled material, to verify its thermal performance in a real situation. The results showed that recycled shingles must be used with technical criteria similar to those used for fiber cement tiles, with regard to the heat gain into the building. Within these criteria should be taken into account local characteristics, especially in regions with hot and humid climate, and its use must be associated, according to the literature, to elements of thermal insulation and use of passive techniques such as vented attics, ceilings and right foot higher

Fatores críticos de baixa efetividade no planejamento estratégico das cidades: um estudo na região metropolitana do vale do paraíba e litoral norte

Pós-graduação em Engenharia Mecânica - FEG

Technical evolution of 3d modular construction from the nineteenth century to world war II

3D Modular construction is poorly known and scarcely published in technical literature. In spite of that there are an increasing number of manufacturers offering their products in different countries. This method has largely evolved from early examples such as the American Gold Rush prefabrication in the nineteenth century, the Sears precut homes or Voisin´s prototypes for modular homes, to the end of the first half of the twentieth century. In this period a non negligible number of attempts in 3D modular construction have been carried out, ranging from theoretical proposals to several hundred or thousand units produced. Selected examples of modular architecture will be analyses in order to illustrate its technical evolution, concerning materials, structure, transportation and on site assembly. Success and failure factors of the different systems will be discussed. Conclusions about building criteria shown in them and their applicability in current architecture will be drawn.

Solar Photovoltaic Energy Project Development on Brownfields: Leveraging Policy Incentives and Project Financing Mechanisms

This study evaluates the practice of redeveloping Brownfields with solar photovoltaic renewable energy technology. Utilizing renewable energy as a strategy to reuse contaminated or potentially contaminated property is a relatively new convention. While the benefits of redeveloping Brownfields are well established, ongoing challenges and limited literature on the subject complicate the practice. Challenges, opportunities, and benefits related to renewable energy development on Brownfields are identified and analyzed. Strategic leveraging of federal, state, local, and utility incentives for renewable energy and Brownfield revitalization, and gap finance tools is explored and evaluated. A comparison of three photovoltaic Brownfield projects is analyzed for critical success and failure factors, and lessons learned. A recommendation of best practices is made based on findings and results.

O insucesso em matemática no curso técnico em agropecuária integrado ao ensino médio IFB- Campus Planaltina

Dissertação apresentada para obtenção do grau de Mestre em Educação Social e Intervenção Comunitária

O insucesso em matemática no curso técnico em agropecuária integrado ao ensino médio IFB- Campus Planaltina

Dissertação apresentada para obtenção do grau de Mestre em Educação Social e Intervenção Comunitária