Intensification Of Bioactive Compounds Extraction From Medicinal Plants Using Ultrasonic Irradiation.

Extraction processes are largely used in many chemical, biotechnological and pharmaceutical industries for recovery of bioactive compounds from medicinal plants. To replace the conventional extraction techniques, new techniques as high-pressure extraction processes that use environment friendly solvents have been developed. However, these techniques, sometimes, are associated with low extraction rate. The ultrasound can be effectively used to improve the extraction rate by the increasing the mass transfer and possible rupture of cell wall due the formation of microcavities leading to higher product yields with reduced processing time and solvent consumption. This review presents a brief survey about the mechanism and aspects that affecting the ultrasound assisted extraction focusing on the use of ultrasound irradiation for high-pressure extraction processes intensification.

Metal separation from mixed types of batteries using selective precipitation and liquid-liquid extraction techniques

The purpose of this paper is to study metal separation from a sample composed of a mixture of the main types of spent household batteries, using a hydrometallurgical route, comparing selective precipitation and liquid-liquid extraction separation techniques. The preparation of the solution consisted of: grinding the waste of mixed batteries, reduction and volatile metals elimination using electric furnace and acid leaching. From this solution two different routes were studied: selective precipitation with sodium hydroxide and liquid-liquid extraction using Cyanex 272 [bis(2,4,4-trimethylpentyl) phosphoric acid] as extracting agent. The best results were obtained from liquid-liquid extraction in which Zn had a 99% extraction rate at pH 2.5. More than 95% Fe was extracted at pH 7.0, the same pH at which more than 90% Ce was extracted. About 88% Mn, Cr and Co was extracted at this pH. At pH 3.0, more than 85% Ni was extracted, and at pH 3.5 more than 80% of Cd and La was extracted. (C) 2010 Elsevier Ltd. All rights reserved.

EXTRACTION OF OIL FROM PRESSED PALM OIL (Elaes guineensis) FIBERS USING SUPERCRITICAL CO2

Residual fibers from palm oil production are a good source of carotene, since they contain more than 5% of the original oil, with about 5000 ppm of carotenoids. As carotenoids are thermosensitive molecules, supercritical CO2 can be used for oil recovery, because this technique employs low temperatures. In this work results of oil extraction experiments from pressed palm oil fibers are shown. Fibers were from AGROPALMA, an industry which is located in Tailândia (Pará, Brazil). Extractions were carried out at 200, 250 and 300 bar and at temperatures of 45 and 55oC. Oil was analyzed by UV/vis spectrophotometry for total carotene determination. Results showed a large increase in extraction rate from 200 to 250 bar and a small variation from 250 to 300 bar. The total amount of carotenes did not increase in the course of extraction at 300 bar, but it showed a large increase at 200 and at 250 bar. Free fatty acids are present in amounts larger than those found in commercial oils.

Extraction of oil from pressed palm oil (Elaes guineensis) fibers using supercritical CO2

Residual fibers from palm oil production are a good source of carotene, since they contain more than 5% of the original oil, with about 5000 ppm of carotenoids. As carotenoids are thermosensitive molecules, supercritical CO₂ can be used for oil recovery, because this technique employs low temperatures. In this work results of oil extraction experiments from pressed palm oil fibers are shown. Fibers were from AGROPALMA, an industry which is located in Tailândia (Pará, Brazil). Extractions were carried out at 200, 250 and 300 bar and at temperatures of 45 and 55oC. Oil was analyzed by UV/vis spectrophotometry for total carotene determination. Results showed a large increase in extraction rate from 200 to 250 bar and a small variation from 250 to 300 bar. The total amount of carotenes did not increase in the course of extraction at 300 bar, but it showed a large increase at 200 and at 250 bar. Free fatty acids are present in amounts larger than those found in commercial oils.

Quantification of myocardial blood flow with 82Rb positron emission tomography: clinical validation with 15O-water.

PURPOSE: Quantification of myocardial blood flow (MBF) with generator-produced (82)Rb is an attractive alternative for centres without an on-site cyclotron. Our aim was to validate (82)Rb-measured MBF in relation to that measured using (15)O-water, as a tracer 100% of which can be extracted from the circulation even at high flow rates, in healthy control subject and patients with mild coronary artery disease (CAD). METHODS: MBF was measured at rest and during adenosine-induced hyperaemia with (82)Rb and (15)O-water PET in 33 participants (22 control subjects, aged 30 ± 13 years; 11 CAD patients without transmural infarction, aged 60 ± 13 years). A one-tissue compartment (82)Rb model with ventricular spillover correction was used. The (82)Rb flow-dependent extraction rate was derived from (15)O-water measurements in a subset of 11 control subjects. Myocardial flow reserve (MFR) was defined as the hyperaemic/rest MBF. Pearson's correlation r, Bland-Altman 95% limits of agreement (LoA), and Lin's concordance correlation ρ (c) (measuring both precision and accuracy) were used. RESULTS: Over the entire MBF range (0.66-4.7 ml/min/g), concordance was excellent for MBF (r = 0.90, [(82)Rb-(15)O-water] mean difference ± SD = 0.04 ± 0.66 ml/min/g, LoA = -1.26 to 1.33 ml/min/g, ρ(c) = 0.88) and MFR (range 1.79-5.81, r = 0.83, mean difference = 0.14 ± 0.58, LoA = -0.99 to 1.28, ρ(c) = 0.82). Hyperaemic MBF was reduced in CAD patients compared with the subset of 11 control subjects (2.53 ± 0.74 vs. 3.62 ± 0.68 ml/min/g, p = 0.002, for (15)O-water; 2.53 ± 1.01 vs. 3.82 ± 1.21 ml/min/g, p = 0.013, for (82)Rb) and this was paralleled by a lower MFR (2.65 ± 0.62 vs. 3.79 ± 0.98, p = 0.004, for (15)O-water; 2.85 ± 0.91 vs. 3.88 ± 0.91, p = 0.012, for (82)Rb). Myocardial perfusion was homogeneous in 1,114 of 1,122 segments (99.3%) and there were no differences in MBF among the coronary artery territories (p > 0.31). CONCLUSION: Quantification of MBF with (82)Rb with a newly derived correction for the nonlinear extraction function was validated against MBF measured using (15)O-water in control subjects and patients with mild CAD, where it was found to be accurate at high flow rates. (82)Rb-derived MBF estimates seem robust for clinical research, advancing a step further towards its implementation in clinical routine.

Análise de resíduos de agrotóxicos em tomates empregando dispersão da matriz em fase sólida (DMFS) e cromatografia gasosa

This work was aimed on optimization of the matrix solid-phase dispersion (MSPD) technique using gas chromatography for analyzing residues of chlorpyriphos, λ-cyhalothrin, cypermethrin and deltamethrin in tomatoes. The results showed that silica was more efficient for the clean up of extracts, but florisil provided the highest recovery rates. A 2³ complete factorial design was carried out to evaluate the absorbent/sample ratio, presence of co-column (silica) and ultrasonic bath on the extraction rate. The percentage of extraction of the pesticides chlorpyriphos, λ-cyhalothrin, cypermethrin and deltamethrin were 64.7, 88.3, 99.2 and 89.2%, respectively, with relative standard deviations below 5%.

EFFECTS OF HARVESTING ON LEAF PRODUCTION AND REPRODUCTIVE PERFORMANCE OF Copernicia prunifera (Mill.) H.E. Moore1

ABSTRACT This work aimed to evaluate the consequences of the monthly extraction of immature leaves in survival, leaf production and reproductive performance ofCopernicia prunifera H. E. Moore palm, popularly known as carnaúba. One hundred sixty reproductive adult palms were monitored for 17 months in four extractive communities located at the coast of the state of Piauí. As a result, it was observed that leaves, flowers, fruits and seeds production were reduced in the palm submitted to 50% or 75% monthly extraction. Higher levels of extraction were followed by smaller levels in seed germination. No deaths were observed even in the group subjected to 75% monthly leaves exploration. In order not to produce damage to palm trees development it is suggested that leaf extraction rate should not exceed 25% monthly as well as pausing of extractive activity preferentially during fruit maturation.

Trois essais en économie des ressources naturelles

Cette thèse est composée de trois articles en économie des ressources naturelles non-renouvelables. Nous considérons tour à tour les questions suivantes : le prix in-situ des ressources naturelles non-renouvelables ; le taux d’extraction optimal et le prix des res- sources non-renouvelables et durables. Dans le premier article, nous estimons le prix in-situ des ressources naturelles non-renouvelables en utilisant les données sur le coût moyen d’extraction pour obtenir une approximation du coût marginal. En utilisant la Méthode des Moments Généralisés, une dynamique du prix de marché derivée des conditions d’optimalité du modèle d’Hotelling est estimée avec des données de panel de 14 ressources naturelles non-renouvelables. Nous trouvons des résultats qui tendent à soutenir le modèle. Premièrement, le modèle d’Hotelling exhibe un bon pouvoir explicatif du prix de marché observé. Deuxièmement, bien que le prix estimé présente un changement structurel dans le temps, ceci semble n’avoir aucun impact significatif sur le pouvoir explicatif du modèle. Troisièmement, on ne peut pas rejeter l’hypothèse que le coût marginal d’extraction puisse être approximé par les données sur le coût moyen. Quatrièmement, le prix in-situ estimé en prenant en compte les changements structurels décroît ou exhibe une forme en U inversé dans le temps et semble être corrélé positivement avec le prix de marché. Cinquièmement, pour neuf des quatorze ressources, la différence entre le prix in-situ estimé avec changements structurels et celui estimé en négligeant les changements structurels est un processus de moyenne nulle. Dans le deuxième article, nous testons l’existence d’un équilibre dans lequel le taux d’extraction optimal des ressources non-renouvelables est linéaire par rapport au stock de ressource en terre. Tout d’abord, nous considérons un modèle d’Hotelling avec une fonction de demande variant dans le temps caractérisée par une élasticité prix constante et une fonction de coût d’extraction variant dans le temps caractérisée par des élasticités constantes par rapport au taux d’extraction et au stock de ressource. Ensuite, nous mon- trons qu’il existe un équilibre dans lequel le taux d’extraction optimal est proportionnel au stock de ressource si et seulement si le taux d’actualisation et les paramètres des fonctions de demande et de coût d’extraction satisfont une relation bien précise. Enfin, nous utilisons les données de panel de quatorze ressources non-renouvelables pour vérifier empiriquement cette relation. Dans le cas où les paramètres du modèle sont supposés invariants dans le temps, nous trouvons qu’on ne peut rejeter la relation que pour six des quatorze ressources. Cependant, ce résultat change lorsque nous prenons en compte le changement structurel dans le temps des prix des ressources. En fait, dans ce cas nous trouvons que la relation est rejetée pour toutes les quatorze ressources. Dans le troisième article, nous étudions l’évolution du prix d’une ressource naturelle non-renouvelable dans le cas où cette ressource est durable, c’est-à-dire qu’une fois extraite elle devient un actif productif détenu hors terre. On emprunte à la théorie de la détermination du prix des actifs pour ce faire. Le choix de portefeuille porte alors sur les actifs suivant : un stock de ressource non-renouvelable détenu en terre, qui ne procure aucun service productif ; un stock de ressource détenu hors terre, qui procure un flux de services productifs ; un stock d’un bien composite, qui peut être détenu soit sous forme de capital productif, soit sous forme d’une obligation dont le rendement est donné. Les productivités du secteur de production du bien composite et du secteur de l’extraction de la ressource évoluent de façon stochastique. On montre que la prédiction que l’on peut tirer quant au sentier de prix de la ressource diffère considérablement de celle qui découle de la règle d’Hotelling élémentaire et qu’aucune prédiction non ambiguë quant au comportement du sentier de prix ne peut être obtenue de façon analytique.

Productividad del sector ganadero bovino en Colombia durante los años 2000 a 2009

En este trabajo se pretende calcular la productividad del sector ganadero bovino especializado en la producción de carne en Colombia para el periodo comprendido entre el año 2000 y el 2009. Se hace una revisión teórica sobre la productividad y cómo aplica para el sector objeto de estudio. Así mismo, se definen un conjunto de indicadores entre los que se encuentra la tasa de extracción, peso y edad al sacrificio, peso y rendimiento de la canal, capacidad de carga y productividad animal, con el fin de hacer la medición. Al tiempo que se calculan para Colombia, se hace para Argentina y Uruguay, países seleccionados por su liderazgo ganadero a nivel mundial, con el objetivo de hacer un benchmarking de la productividad. Los resultados que se obtuvieron señalan que Argentina es el país más productivo, seguido de Uruguay y Colombia. Sin embargo, los únicos que presentan mejoría en el nivel de productividad son Argentina y Colombia, estando este último muy distante de los demás. Las razones que determinan esta situación son múltiples, y en el trabajo se explican detenidamente. Por último, se presenta una visión de FEDEGAN sobre cómo se puede mejorar la productividad en el país, de tal manera que se puedan alcanzar los objetivos planteados al 2019.

Comportamento hemodinâmico e metabólico do choque hemorrágico: estudo experimental no cão

JUSTIFICATIVA E OBJETIVOS: Diversos modelos experimentais têm sido utilizados para ilustrar as alterações hemodinâmicas e metabólicas que ocorrem durante o choque hemorrágico. O objetivo da pesquisa é o de observar os comportamentos hemodinâmicos e metabólicos que acontecem em um modelo seqüencial e progressivo de choque hemorrágico no cão, verificando quais índices alteram-se mais precocemente. MÉTODO: O estudo foi realizado em 13 cães sob anestesia venosa total com pentobarbital sódico, em normoventilação e previamente esplenectomizados. Os animais não foram hidratados e a velocidade do sangramento foi ditada pela pressão arterial em que o animal se encontrava. Os atributos estudados foram divididos em hemodinâmicos (freqüência cardíaca - FC, pressão arterial média - PAM, índice de resistência vascular sistêmica - IRVS, índice sistólico - IS, índice cardíaco - IC, índice de choque - I.choque, índice de trabalho sistólico do ventrículo esquerdo - ITSVE, pressão capilar pulmonar - PCP, pressão venosa central - PVC) e metabólicos (saturação venosa mista - SvO2, pressão venosa de oxigênio - PvO2, transporte de oxigênio - DO2, consumo de oxigênio - VO2, extração de oxigênio - TEO2, lactato sérico). A coleta de dados e os atributos foram estudados em 6 momentos distintos, sendo M1, o momento controle e os outros momentos correspondentes a decréscimos gradativos de 10% da volemia calculada para cada animal. RESULTADOS: A hemorragia determinou diminuição significativa da FC somente em M6; queda da PAM, IC, IS e ITSVE a cada momento estudado; discreta alteração da PVC e PCP em cada momento; diminuição da PvO2 e da SvO2 nos momentos estudados; redução do DO2, estabilização do VO2 e elevação da TEO2 nos momentos; o índice de choque apresentou elevação até M3, diminuição em M4 e nova elevação até M6; o IRVS elevou-se até M6, ficou inalterado em M5 e apresentou diminuição significativa em M6; o lactato apresentou elevações a partir de M5 e M6. CONCLUSÕES: Considerou-se que a pressão arterial média, freqüência cardíaca, pressão venosa central e pressão capilar pulmonar não refletem o real estado volêmico dos cães no nosso modelo experimental e que o transporte, consumo e a taxa de extração de oxigênio são parâmetros úteis na determinação da reversibilidade e prognóstico do choque hemorrágico.

Utilização da curva de resfriamento na análise do refino de grão da liga AA 356

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação da influência da natureza da matriz sólida sobre a extração supercrítica de óleos vegetais

A extração de substâncias de substratos sólidos tanto a baixas como a altas pressões envolve pelo menos duas fases, uma sólida e outra fluida. O conteúdo de soluto em cada fase é expresso em termos do volume da fase e/ou do volume do solvente. Então para modelar a transferência de massa interfacial, é necessário um coeficiente de partição. Em geral a forma mais simples para tratar o problema é modelar as fases separadamente. O mecanismo de transferência de massa predominante pode variar de sistema para sistema. Para alguns substratos a maior resistência pode estar na fase sólida e para outros ela está na fase fluida. Como na interface as concentrações referentes a cada fase são representadas por grandezas diferentes, as fases têm de ser modeladas separadamente. No entanto, dependendo do sistema, pode haver um mecanismo de transferência predominando sobre o outro e, muitos efeitos podem ser desprezados para a simplificação do modelo. A utilização de modelos matemáticos mais simples requer uma combinação das variáveis na definição de parâmetros mais abrangentes que possam representar o fenômeno. Neste trabalho as curvas de extração foram ajustadas a um modelo que descreve a transferência de massa interfacial como uma cinética de primeira ordem, tendo a constante da velocidade de extração único parâmetro de ajuste. Propõe-se que este parâmetro de ajuste depende da solubilidade do soluto no solvente supercrítico e das características do substrato solido. Para isto foram feitos experimentos de extração com babaçu, açaí em pó e polpa de pupunha, usando dióxido de carbono supercrítico nas condições de 20, 25 e 30 MPa a uma temperatura de 50 ºC. Os resultados mostraram que os dados experimentais se ajustam bem a um modelo com uma constante característica de cada material, com valores 4,1983 x 10-5 m/kg∙s para o babaçu, 4,2258 x 10-5 m/kg∙s para a pupunha e 3,9115 x 10-5 m/kg∙s para o açaí em pó.

Effects of arterial oxygen tension and cardiac output on venous saturation: a mathematical modeling approach

OBJECTIVES: Hemodynamic support is aimed at providing adequate O-2 delivery to the tissues; most interventions target O-2 delivery increase. Mixed venous O-2 saturation is a frequently used parameter to evaluate the adequacy of O-2 delivery. METHODS: We describe a mathematical model to compare the effects of increasing O-2 delivery on venous oxygen saturation through increases in the inspired O-2 fraction versus increases in cardiac output. The model was created based on the lungs, which were divided into shunted and non-shunted areas, and on seven peripheral compartments, each with normal values of perfusion, optimal oxygen consumption, and critical O-2 extraction rate. O-2 delivery was increased by changing the inspired fraction of oxygen from 0.21 to 1.0 in steps of 0.1 under conditions of low (2.0 L.min(-1)) or normal (6.5 L.min(-1)) cardiac output. The same O-2 delivery values were also obtained by maintaining a fixed O-2 inspired fraction value of 0.21 while changing cardiac output. RESULTS: Venous oxygen saturation was higher when produced through increases in inspired O-2 fraction versus increases in cardiac output, even at the same O-2 delivery and consumption values. Specifically, at high inspired O-2 fractions, the measured O-2 saturation values failed to detect conditions of low oxygen supply. CONCLUSIONS: The mode of O-2 delivery optimization, specifically increases in the fraction of inspired oxygen versus increases in cardiac output, can compromise the capability of the "venous O-2 saturation" parameter to measure the adequacy of oxygen supply. Consequently, venous saturation at high inspired O-2 fractions should be interpreted with caution.

Ion Beam Analysis of He-implanted fusion solid breedes

Introduction Lithium-based ceramics (silicates, titanates, ?) possess a series of advantages as alternative over liquid lithium and lithium-lead alloys for fusion breeders. They have a sufficient lithium atomic density (up to 540 kg*m-3), high temperature stability (up to 1300 K), and good chemical compatibility with structural materials. Nevertheless, few research is made on the diffusion behavior of He and H isotopes through polycrystalline structures of porous ceramics which is crucial in order to understand the mobility of gas coolants as well as, the release of tritium. Moreover, in the operating conditions of actual breeder blanket concepts, the extraction rate of the helium produced during lithium transmutation can be affected by the composition and the structure of the near surface region modifying the performance of BB materials

Métodos de extração de fósforo e micronutrientes em latossolos com uso de energia ultrassônica

Assessing the soil nutrient availability to plants under lab conditions is one of the main challenges to Soil Fertility and Chemistry, due to the complex behavior and the interaction of the soil properties. Many extractant solutions associated with mechanical forms of agitation have been proposed, showing different correlations with plant growth and nutrients absorption. Using ultrasonic energy is a agitation procedure of the soil:extractant solution suspension (based on the cavitation phenomenon). It allows the establishment of relations between the amount of extracted nutrient and the ultrasonic energy level. Thus, this work aims: to evaluate the effect of cavitation intensity on the extraction of P, Zn, Cu, Mn and Fe in soil samples from five Latosols under different uses around Uberlândia and Uberaba, Minas Gerais State; to obtain extracting curves as function of ultrasonic energy levels; and to obtain an index from extracting curves to expresses the nutrient retention by the soil solid phase. A soil-solution suspension (ratio 1:10) was sonicated using a probe ultrasound equipment under different combinations of power and time: i) 30 W for 35, 70, 140 and 280 s; ii) 50 W for 21, 42, 84 and 168 s; and iii) 70 W for 15, 30, 60 and 120 s. The extractant solutions used were Mehlich-1 (for all elements), Olsen and distilled water for P. After each sonication, P concentration was quantified by molybdenum blue colorimetric method and Zn, Cu, Mn and Fe by flame atomic absorption spectrophotometry. The cavitation intensity did not affect the P extraction, only the total energy applied. The P extraction was influenced by extractant solution, decreasing as follows: Mehlich-1>Olsen>water. In cultivated Latosols, the P extraction increased linearly with ultrasonic energy, and the slope of the 1:1 linear regression reflects the P retention in the soil. The Zn and Fe extractions were influenced only by total energy applied. Mn and Cu extractions were influenced by both cavitation intensity and total ultrasonic energy. Soils containing similar amounts of P, Cu, Zn, Mn, and Fe may have a different extraction rate. Likewise, soils containing different amounts of those elements may have the same extraction rate.