Praticas socioculturais, poder e diferenciação em Bico, Cuiamucu e Canela-Fina - comunidades amazonicas

Universidade Estadual de Campinas . Faculdade de Educação Física

The biophysical perspective of a middle income economy: material flows in Mexico

We analyse natural resource use dynamics in the Mexican economy during the last three decades. Despite low and uneven economic growth, the extraction and use of materials in the Mexican economy has continuously increased during the last 30 years. In this period, population growth rather than economic growth was the main driving force for biophysical growth. In addition, fundamental changes have taken place in the primary sectors, in manufacturing, and in household consumption and these are reflected in an increasing emphasis on the use of fossil fuels and construction materials. Mexico’s economy has been strongly influenced by international trade since the country commenced competing in international markets. In the 1970s, Mexico mainly exported primary resources. This pattern has changed and manufactured goods now have a much greater importance due to a boom in assembling industries. In contrast with other Latin American countries, Mexico has achieved a diversification of production, moving towards technology-intensive products and a better mix in its export portfolio. However, crude oil exports still represent the single most important export good. Mexico’s material consumption is still well below the OECD average but is growing fast and the current resource use patterns may well present serious social and environmental problems to the medium and long term sustainability of Mexico’s economy and community. Information on natural resource use and resource productivity could provide valuable guidance for economic policy planning in Mexico.

Inter-Connectedness In The Scottish Economy, 1998-2004

The measurement of inter-connectedness in an economy using input-output tables is not new, however much of the previous literature has not had any explicit dynamic dimension. Studies have tried to estimate the degree of inter-relatedness for an economy at a given point in time using one inputoutput table, some have compared different economies at a point in time but few have looked at the question of how inter-connectedness within an economy changes over time. The publication in 2009 of a consistent series of inputoutput tables for Scotland offers the researcher the opportunity to track changes in the degree of inter-connectedness over the seven year period 1998 to 2004. The paper is in two parts. A simple measure of inter-connectedness is introduced in the first part of the paper and applied to the Scottish tables. It is shown that although the aggregate results might appear to indicate a degree of import substitution was taking place this result is not robust to industrial disaggregation. In the second part of the paper an extraction method is applied to an eleven sector disaggregation of the Scottish economy in order to estimate how interconnectedness has changed over time for each industrial sector. It is shown that for the majority of sectors the degree of interconnectedness with the rest of the Scottish economy has grown for others, in particular Financial Services and Energy and Water Supply it has not.

The Growth in Inter-connectedness in the Scottish Economy, 1998-2007; a disaggregated analysis

The measurement of inter-connectedness in an economy using input-output tables is not new, however much of the previous literature has not had any explicit dynamic dimension. Studies have tried to estimate the degree of inter-relatedness for an economy at a given point in time using one input-output table, some have compared different economies at a point in time but few have looked at the question of how interconnectedness within an economy changes over time. The publication in 2010 of a consistent series of input-output tables for Scotland offers the researcher the opportunity to track changes in the degree of inter-connectedness over the seven year period 1998 to 2007. The paper is in two parts. A simple measure of inter-connectedness is introduced in the first part of the paper and applied to the Scottish tables. In the second part of the paper an extraction method is applied to sector by sector to the tables in order to estimate how interconnectedness has changed over time for each industrial sector.

The Growth in Inter-connectedness in the Scottish Economy 1998-2007; a disaggregated analysis.

The measurement of inter-connectedness in an economy using input-output tables is not new, however much of the previous literature has not had any explicit dynamic dimension. Studies have tried to estimate the degree of inter-relatedness for an economy at a given point in time using one input-output table, some have compared different economies at a point in time but few have looked at the question of how interconnectedness within an economy changes over time. The publication in 2010 of a consistent series of input-output tables for Scotland offers the researcher the opportunity to track changes in the degree of inter-connectedness over the seven year period 1998 to 2007. The paper is in two parts. A simple measure of inter-connectedness is introduced in the first part of the paper and applied to the Scottish tables. In the second part of the paper an extraction method is applied to sector by sector to the tables in order to estimate how interconnectedness has changed over time for each industrial sector.

Merging the hypothetical extraction method and the classical multiplier approach: a hybrid possibility for identifying key distributive sectors

The two main alternative methods used to identify key sectors within the input-output approach, the Classical Multiplier method (CMM) and the Hypothetical Extraction method (HEM), are formally and empirically compared in this paper. Our findings indicate that the main distinction between the two approaches stems from the role of the internal effects. These internal effects are quantified under the CMM while under the HEM only external impacts are considered. In our comparison, we find, however that CMM backward measures are more influenced by within-block effects than the proposed forward indices under this approach. The conclusions of this comparison allow us to develop a hybrid proposal that combines these two existing approaches. This hybrid model has the advantage of making it possible to distinguish and disaggregate external effects from those that a purely internal. This proposal has also an additional interest in terms of policy implications. Indeed, the hybrid approach may provide useful information for the design of ''second best'' stimulus policies that aim at a more balanced perspective between overall economy-wide impacts and their sectoral distribution.

Monetary policy with signal extraction from the bond market

Monetary policy is conducted in an environment of uncertainty. This paper sets upa model where the central bank uses real-time data from the bond market togetherwith standard macroeconomic indicators to estimate the current state of theeconomy more efficiently, while taking into account that its own actions influencewhat it observes. The timeliness of bond market data allows for quicker responsesof monetary policy to disturbances compared to the case when the central bankhas to rely solely on collected aggregate data. The information content of theterm structure creates a link between the bond market and the macroeconomythat is novel to the literature. To quantify the importance of the bond market asa source of information, the model is estimated on data for the United Statesand Australia using Bayesian methods. The empirical exercise suggests that thereis some information in the US term structure that helps the Federal Reserve toidentify shocks to the economy on a timely basis. Australian bond prices seemto be less informative than their US counterparts, perhaps because Australia is arelatively small and open economy.

A Proposal for System Performance Evaluation for an ERP Knowledge Extraction Model

Much has been researched and discussed in the importance played by knowledge in organizations. We are witnessing the establishment of the knowledge economy, but this "new economy" brings in itself a whole complex system of metrics and evaluations, and cannot be dissociated from it. Due to its importance, the initiatives of knowledge management must be continually assessed on their progress in order to verify whether they are moving towards achieving the goals of success. Thus, good measurement practices should include not only how the organization quantifies its knowledge capital, but also how resources are allocated to supply their growth. Thinking about the aspects listed above, this paper presents an approach to a model for Knowledge extraction using an ERP system, suggesting the establishment of a set of indicators for assessing organizational performance. The objective is to evaluate the implementation of projects of knowledge management and thus observe the general development of the organization.

Export competitiveness in an oil and gas economy: the case of Trinidad and Tobago, 1985-2010

The oil and gas sector has led the economy of Trinidad and Tobago since the late 1970s and, more pronouncedly, since 2000, accounting for a large share of gdp, total exports and tax revenue. Its prospects in the medium term could be negatively affected, however, if oil and gas extraction expands in other countries, and if the United States attains energy self-sufficiency. This paper offers an analysis of the evolution and competitiveness of its oil and non-oil exports to both the United States and global markets, based on the revealed comparative advantage (rca) index used by eclac. Other foreign trade indicators are also included to determine the structure of the country’s trading relations. The period from 1985 to 2010 is analysed and the results presented are intended to advocate the diversification of Trinidad and Tobago’s exports into more dynamic and diversified markets.

Screen-printed electrode based electrochemical detector coupled with ionic liquid dispersive liquid–liquid microextraction and microvolume back-extraction for determination of mercury in water samples

A novel approach is presented, whereby gold nanostructured screen-printed carbon electrodes (SPCnAuEs) are combined with in-situ ionic liquid formation dispersive liquid–liquid microextraction (in-situ IL-DLLME) and microvolume back-extraction for the determination of mercury in water samples. In-situ IL-DLLME is based on a simple metathesis reaction between a water-miscible IL and a salt to form a water-immiscible IL into sample solution. Mercury complex with ammonium pyrrolidinedithiocarbamate is extracted from sample solution into the water-immiscible IL formed in-situ. Then, an ultrasound-assisted procedure is employed to back-extract the mercury into 10 µL of a 4 M HCl aqueous solution, which is finally analyzed using SPCnAuEs. Sample preparation methodology was optimized using a multivariate optimization strategy. Under optimized conditions, a linear range between 0.5 and 10 µg L−1 was obtained with a correlation coefficient of 0.997 for six calibration points. The limit of detection obtained was 0.2 µg L−1, which is lower than the threshold value established by the Environmental Protection Agency and European Union (i.e., 2 µg L−1 and 1 µg L−1, respectively). The repeatability of the proposed method was evaluated at two different spiking levels (3 and 10 µg L−1) and a coefficient of variation of 13% was obtained in both cases. The performance of the proposed methodology was evaluated in real-world water samples including tap water, bottled water, river water and industrial wastewater. Relative recoveries between 95% and 108% were obtained.

Microwave-Assisted Extraction of Phenolic Compounds from Almond Skin Byproducts (Prunus amygdalus): A Multivariate Analysis Approach

A microwave-assisted extraction (MAE) procedure to isolate phenolic compounds from almond skin byproducts was optimized. A three-level, three-factor Box–Behnken design was used to evaluate the effect of almond skin weight, microwave power, and irradiation time on total phenolic content (TPC) and antioxidant activity (DPPH). Almond skin weight was the most important parameter in the studied responses. The best extraction was achieved using 4 g, 60 s, 100 W, and 60 mL of 70% (v/v) ethanol. TPC, antioxidant activity (DPPH, FRAP), and chemical composition (HPLC-DAD-ESI-MS/MS) were determined by using the optimized method from seven different almond cultivars. Successful discrimination was obtained for all cultivars by using multivariate linear discriminant analysis (LDA), suggesting the influence of cultivar type on polyphenol content and antioxidant activity. The results show the potential of almond skin as a natural source of phenolics and the effectiveness of MAE for the reutilization of these byproducts.

Imaging Land Subsidence Induced by Groundwater Extraction in Beijing (China) Using Satellite Radar Interferometry

Beijing is one of the most water-stressed cities in the world. Due to over-exploitation of groundwater, the Beijing region has been suffering from land subsidence since 1935. In this study, the Small Baseline InSAR technique has been employed to process Envisat ASAR images acquired between 2003 and 2010 and TerraSAR-X stripmap images collected from 2010 to 2011 to investigate land subsidence in the Beijing region. The maximum subsidence is seen in the eastern part of Beijing with a rate greater than 100 mm/year. Comparisons between InSAR and GPS derived subsidence rates show an RMS difference of 2.94 mm/year with a mean of 2.41 ± 1.84 mm/year. In addition, a high correlation was observed between InSAR subsidence rate maps derived from two different datasets (i.e., Envisat and TerraSAR-X). These demonstrate once again that InSAR is a powerful tool for monitoring land subsidence. InSAR derived subsidence rate maps have allowed for a comprehensive spatio-temporal analysis to identify the main triggering factors of land subsidence. Some interesting relationships in terms of land subsidence were found with groundwater level, active faults, accumulated soft soil thickness and different aquifer types. Furthermore, a relationship with the distances to pumping wells was also recognized in this work.

Innovating from the War Economy: Formal, Informal, and Illicit Economic Activities of the Military in Colombia

Over the last decade, the Colombian military has successfully rolled back insurgent groups, cleared and secured conflict zones, and enabled the extraction of oil and other key commodity exports. As a result, official policies of both the Uribe and Santos governments have promoted the armed forces to participate to an unprecedented extent in economic activities intended to consolidate the gains of the 2000s. These include formal involvement in the economy, streamlined in a consortium of military enterprises and social foundations that are intended to put the Colombian defense sector “on the map” nationally and internationally, and informal involvement expanded mainly through new civic action development projects intended to consolidate the security gains of the 2000s. However, failure to roll back paramilitary groups other than through the voluntary amnesty program of 2005 has facilitated the persistence of illicit collusion by military forces with reconstituted “neoparamilitary” drug trafficking groups. It is therefore crucially important to enhance oversight mechanisms and create substantial penalties for collusion with illegal armed groups. This is particularly important if Colombia intends to continue its new practice of exporting its security model to other countries in the region. The Santos government has initiated several promising reforms to enhance state capacity, institutional transparence, and accountability of public officials to the rule of law, which are crucial to locking in security gains and revitalizing democratic politics. Efforts to diminish opportunities for illicit association between the armed forces and criminal groups should complement that agenda, including the following: Champion breaking existing ties between the military and paramilitary successor groups through creative policies involving a mixture of punishments and rewards directed at the military; Investigation and extradition proceedings of drug traffickers, probe all possible ties, including as a matter of course the possibility of Colombian military collaboration. Doing so rigorously may have an important effect deterring military collusion with criminal groups. Establish and enforce zero-tolerance policies at all military ranks regarding collusion with criminal groups; Reward military units that are effective and also avoid corruption and criminal ties by providing them with enhanced resources and recognition; Rely on the military for civic action and development assistance as minimally as possible in order to build long-term civilian public sector capacity and to reduce opportunities for routine exposure of military forces to criminal groups circulating in local populations.

Stray dogs in Bucharest, and the political economy of Romanian socialism. From hunting the “enemies” of Stalinist economy, to poisoning urban parasites, and the rise of urban anarchy: 1950s-1990s.

My paper discusses three different ways in which stray dogs have been intertwined with ideologies of economic and urban development in Romania. I categorize results from archival and ethnographic research under three major time periods: early socialism, late socialism, and post-socialism. During early socialism stray dogs were seen to be damaging the soviet economy by killing species that humans could also hunt, like rabbits. During late socialism, stray dogs appeared as the enemies of the communist city, and the department of urban sanitation was given orders to poison dogs with strychnine. Finally, the increasing number of stray dogs in Bucharest after the collapse of communism was seen as a direct result of former communist demolitions, and was also taken as a sign of the collapsing state. Through such examples my paper discusses how the state and particular population groups have seen dogs as parts of an unwanted and dangerous nature, rather than a species that needs to be protected. I argue that distinctions of nature and culture have served discourses of civilization and the view of Bucharest as a model socialist, and then European city. Throughout my paper I juxtapose the treatment of stray dogs with other, more “valued” urban natures like the protection of parks, the wide-spread hobby of pigeon breeding during socialist years, the most recent debate on saving the rural area of Rosia Montana from non-environmentally friendly methods of gold extraction, and the current trend of healthy eating and living.

Extraction of antioxidants from corn by-products for applications in bio-based polymer matrices

The objective of this dissertation is the evaluation of the exploitability of corn cobs as natural additives for bio-based polymer matrices, in order to hone their properties while keeping the fundamental quality of being fully bio-derived. The first part of the project has the purpose of finding the best solvent and conditions to extract antioxidants and anti-degrading molecules from corn cobs, exploiting room and high-temperature processes, traditional and advanced extraction methods, as well as polar and nonpolar solvents. The extracts in their entirety are then analysed to evaluate their antioxidant content, in order to select the conditions able to maximise their anti-degrading properties. The second part of the project, instead, focuses on assessing chemical and physical properties of the best-behaving extract when inserted in a polymeric matrix. To achieve this, low-density polyethylene (LDPE) and poly (butylene succinate – co – adipate) (PBSA) are employed. These samples are obtained through extrusion and are subsequently characterised exploiting the DSC equipment and a sinusoidally oscillating rheometer. In addition, extruded polymeric matrices are subjected to thermal and photo ageing, in order to identify their behaviour after different forms of degradation and to assess their performances with respect to synthetically produced anti-degrading additives.