Determinação simultânea de Rifampicina, Isoniazida, Pirazinamida e Etambutol em comprimidos com doses fixas combinadas

Os comprimidos utilizados no tratamento da tuberculose possuem quatro fármacos associados, isoniazida, pirazinamida, etambutol e rifampicina, e são distribuídos gratuitamente pelo Sistema Único de Saúde. Os métodos analíticos oficiais para analisar este medicamento estão especificados na Farmacopeia Americana 36a edição e na Farmacopeia Internacional 4a edição. Porém, estes compêndios oficiais não possuem monografias para análise simultânea dos quatro fármacos. O objetivo deste estudo foi desenvolver uma metodologia para determinar simultaneamente os princípios ativos em comprimidos dose fixa combinada, utilizando-se cromatografia a líquido de alta eficiência com detector de ultravioleta-visível, pois é de grande importância para o controle da qualidade do medicamento. O método desenvolvido utilizou coluna cromatográfica C18 (250 x 4,6) mm e 5 μm, fase móvel constituída de fase aquosa (85 % tampão formiato de amônio 0,3 mol/L pH 5, 15 % metanol e 0,005 mol/L de Cu2+ ou 250 mg/L de CuSO4.5H2O) e fase orgânica (metanol, 0,1 % de trietilamina e 0,2 % de ácido fórmico). O fluxo foi de 1,0 mL/min e comprimento de ondade 265 nm para isoniazida, pirazinamida e o etambutol e de 335 nm para rifampicina. Este método apresentou desvio padrão relativo inferior a 2,0 % na precisão e linearidade para os quatro fármacos estudados.

Estudo de pré-formulação para dose fixa combinada dos tuberculostáticos rifampicina, isoniazida, pirazinamida e etambutol (4 em 1)

According to the global framework regarding new cases of tuberculosis, Brazil appears at the 18th place. Thus, the Ministry of Health has defined this disease as a priority in the governmental policies. As a consequence, studies concerning treatment and prevention have increased. Fixed-dose combination formulations (FDC) are recognized as beneficial and are recommended by WHO, but they present instability and loss on rifampicin bioavailability. The main purpose of this work was to carry out a pre-formulation study with the schedule 1 tuberculosis treatment drugs: rifampicin, isoniazid, pyrazinamide and ethambutol and pharmaceutical excipients (lactose, cellulose, magnesium stearate and talc), in order to develop an FDC product (150 mg of rifampicin + 75 mg of isoniazid + 400 mg of pyrazinamide + 250 mg of ethambutol). The studies consisted of the determination of particle size and distribution (Ferret s diameter) and shape through optical microscopy, as well as rheological and technological properties (bulk and tapped densities, Hausner Factor, Carr s Index, repose angle and flux rate) and interactions among drugs and drug excipient through thermal analysis (DSC, DTA, TG and your derivate). The results showed that, except isoniazid, the other drugs presented poor rheological properties, determined by the physical characteristics of the particles: small size and rod like particles shape for rifampicin; rectangular shape for pyrazinamide and ethambutol, beyond its low density. The 4 drug mixture also not presented flowability, particularly that one containing drug quantity indicated for the formulation of FDC products. In this mixture, isoniazid, that has the best flowability, was added in a lower concentration. The addition of microcrystalline cellulose, magnesium stearate and talc to the drug mixtures improved flowability properties. In DSC analysis probable interactions among drugs were found, supporting the hypothesis of ethambutol and pyrazinamide catalysis of the rifampicin-isoniazid reaction resulting in 3- formylrifamycin isonicotinyl hydrazone (HYD) as a degradation product. In the mixtures containing lactose Supertab® DSC curves evidenced incompatibility among drugs and excipient. In the DSC curves of mixtures containing cellulose MC101®, magnesium stearate and talc, no alterations were observed comparing to the drug profiles. The TG/DTG of the binary and ternary mixtures curves showed different thermogravimetrics profiles relating that observed to the drug isolated, with the thermal decomposition early supporting the evidences of incompatibilities showed in the DSC and DTA curves

Aplicação das técnicas eletroanalíticas (voltametria cíclica e de pulso diferencial) usando o eletrodo de diamante dopado com boro para o estudo da isoniazida, etambutol, rifampicina e pirazinamida

In this work a study was done using electrochemical cyclic voltammetry and differential pulse voltammetry for isoniazida (INH), ethambutol (EMB), rifampicina (RIF) and pyrazinamide (PZA) using the electrode boron-doped diamond (BDD) as working electrode. It also verified the applicability of the technique of differential pulse voltammetry in the quantification of the active compounds used in the treatment of tuberculosis, subsequently applying in samples of pharmaceutical formulation. Among the four active compounds studied, isoniazid showed the best results for the detection and quantification using differential pulse voltammetry. At pH 4 and pH 8, for the calibration curves to INH showed good linearity, with quantification limits of 6.15 mmol L-1 (0,844 ppm) and 4.08 mmol L-1 (0.560 ppm) for the respective pH. The proposed method can be used to determine drug isoniazid, for recovery values were obtained in approximately 100%

Síntese, atividade antibacteriana e farmacocinética pré-clínica de pró-fármaco do etambutol com potencial terapêutico para meningite tuberculosa

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Otimização evalidação de métodos analíticos para a determinação simultânea de tuberculostáticos (4-FDC) por CLAE/DAD e CLUE/ DAD

Tuberculosis is a serious disease, but curable in practically 100% of new cases, since complied the principles of modern chemotherapy. Isoniazid (ISN), Rifampicin (RIF), Pyrazinamide (PYR) and Chloride Ethambutol (ETA) are considered first line drugs in the treatment of tuberculosis, by combining the highest level of efficiency with acceptable degree of toxicity. Concerning USP 33 - NF28 (2010) the chromatography analysis to 3 of 4 drugs (ISN, PYR and RIF) last in average 15 minutes and 10 minutes more to obtain the 4th drug (ETA) using a column and mobile phase mixture different, becoming its industrial application unfavorable. Thus, many studies have being carried out to minimize this problem. An alternative would use the UFLC, which is based with the same principles of HPLC, however it uses stationary phases with particles smaller than 2 μm. Therefore, this study goals to develop and validate new analytical methods to determine simultaneously the drugs by HPLC/DAD and UFLC/DAD. For this, a analytical screening was carried out, which verified that is necessary a gradient of mobile phase system A (acetate buffer:methanol 94:6 v/v) and B (acetate buffer:acetonitrile 55:45 v/v). Furthermore, to the development and optimization of the method in HPLC and UFLC, with achievement of the values of system suitability into the criteria limits required for both techniques, the validations have began. Standard solutions and tablets test solutions were prepared and injected into HPLC and UFLC, containing 0.008 mg/mL ISN, 0.043 mg/mL PYR, 0.030 mg.mL-1 ETA and 0.016 mg/mL RIF. The validation of analytical methods for HPLC and UFLC was carried out with the determination of specificity/selectivity, analytical curve, linearity, precision, limits of detection and quantification, accuracy and robustness. The methods were adequate for determination of 4 drugs separately without interfered with the others. Precise, due to the fact of the methods demonstrated since with the days variation, besides the repeatability, the values were into the level required by the regular agency. Linear (R> 0,99), once the methods were capable to demonstrate results directly proportional to the concentration of the analyte sample, within of specified range. Accurate, once the methods were capable to present values of variation coefficient and recovery percentage into the required limits (98 to 102%). The methods showed LOD and LOQ very low showing the high sensitivity of the methods for the four drugs. The robustness of the methods were evaluate, facing the temperature and flow changes, where they showed robustness just with the preview conditions established of temperature and flow, abrupt changes may influence with the results of methods

Síntese, caracterização e investigação das atividades biológicas de complexos de cobre(II) contendo moléculas bioativas e ligantes nitrogenados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Pesquisa de genes de resistência do M. tuberculosis a isoniazida e rifampicina por sequenciamento e pela tecnologia de DNA-STRIP

Tuberculose (TB), causada por Mycobacterium tuberculosis, é uma das doenças infecciosas que mais causam mortes. Estima-se que mais de dois bilhões de pessoas estejam infectadas no mundo. O tratamento da TB consite em associação de fármacos, isoniazida, rifampicina, pirazinamida e etambutol, nos primeiros 2 meses e 4 meses de isoniazida e de rifampicina. Internacionalmente, são consideradas cepas multi resistentes (MDR), as que apresentam resistência simultânea a isoniazida e a rifampicina. A rápida detecção de resistência é essencial para o controle e tratamento da TB, reduzindo, assim, o custo do tratamento e a transmissão da doença. Neste projeto, os isolados já identificados fenotipicamente como resistentes a isoniazida e/ou rifampicina, foram submetidos ao sequenciamento de Sanger para pesquisa de 3 genes relacionados a resistência a isoniazida (katG, inhA e ahpC) e 1 gene de resistência a rifampicina (rpoB). Foi realizada uma comparação destes genes mutados para a resistência utilizando o novo teste desenvolvido pela Biomérieux, denominado GenoType® MTBDRplus, que se baseia na tecnologia DNA-STRIP. Através deste novo teste, foi observada mutação em 22 isolados clínicos de M. tuberculosis para genes de resistência a isoniazida e/ou rifampicina, sendo 4 provenientes do MS e 18 de SP. Já pelo sequenciamento genético foi observada mutação em 24 isolados para genes de resistência a isoniazida e/ou rifampicina, sendo 6 provenientes do MS e 18 de SP. Portanto, através do sequenciamento de Sanger, foi possível detectar um número maior de isolados mutados e mais mutações quando comparado ao teste GenoType® MTBDRplus. Isso acontece porque na técnica de sequenciamento, um fragmento do gene como um todo é analisado e no caso do teste GenoType® MTBDRplus, é verificada apenas a ausência ou presença das mutações mais frequentes descritas na literatura, além de não ser analisado o gene ahpC. A grande ...