Evolución de las características en micrófonos electret

A la hora del estudio de los fenómenos acústicos, es necesario el conocimiento de las características técnicas de los elementos utilizados. Un parte importante de ello son los micrófonos, sus características son esenciales para la obtención y comparación de los datos. Intentando describirlas, este trabajo quiere presentar un estudio detallado de una de las características que influyen en ellos, la característica de vida, especializándose en un tipo de micrófonos, los electret. La metodología seguida para el estudio de estos micrófonos se basa en la recopilación de información tras ensayos a diferentes temperaturas con el fin de caracterizarlos según las distintas distribuciones de vida existentes. En cuanto a los contenidos, se comienza explicando una base histórica de estos, origen, características generales y su evolución a lo largo de los años. Seguidamente se especifica una base teórica sobre distintas características que los afectan, antecedentes, y una explicación de las distintas distribuciones y formas del cálculo de vida. Posteriormente comienza la explicación del material utilizado, así como todas las características, para poder explicar la realización del estudio. Para ello: - Se han realizado tres ensayos a diferentes temperaturas, 140º, 125º y 110º dentro de una cámara térmica - Cada ensayo ha constado de diez micrófonos - El número de horas dentro de la cámara térmica ha variado dependiendo de la temperatura a la que se sometían los micrófonos en cada ensayo. - Tras cada hora se ha realizado una medida de cada uno de los micrófonos del nivel de presión sonora a la entrada, con el fin de ir comparándolos tras cada tiempo dentro de la cámara térmica. - Finalmente se ha realizado un estudio de fiabilidad con el que se ha obtenido el tiempo de vida. ABSTRACT. When the study of acoustic phenomena, the knowledge of technical characteristics for the different elements used is needed. An important part of this are the microphones, their characteristics are essential for obtaining and comparing data. Trying to describe it, this paper wants to present a detailed analysis of one of the characteristics that influence them, the characteristic of life, focusing in one type of microphones, the electret. The methodology for the study of these microphones is based on gathering information after some test at different temperatures in order to characterize them with different existing distributions of life. As for the contents, begins with a historical basis of them, origin, general characteristics and their evolution through the years. Afterward a theoretical background on different characteristics that affect them, history and an explanation of different distributions for calculating life forms. Then it begins with the explanation of the material used, as well as the features, in order to explain the study. For that: - There were three test at different temperatures, 140º, 125º and 110º in a thermal camera - Each test has consisted in ten microphones - The number of hours inside the thermal camera has varied depending on the subjected test which the microphones were - After each hour, it has been made a measurement of each microphone of their sound level pressure, in order to compare them after every hour inside the thermal camera - Finally, it has been made a reliability study to obtain their lifetime

Template-based fluoroethylenepropylene piezoelectrets with tubular channels for transducer applications

We describe the concept, the fabrication, and the most relevant properties of a piezoelectric-polymer system: Two fluoroethylenepropylene (FEP) films with good electret properties are laminated around a specifically designed and prepared polytetrafluoroethylene (PTFE) template at 300 degrees C. After removing the PTFE template, a two-layer FEP film with open tubular channels is obtained. For electric charging, the two-layer FEP system is subjected to a high electric field. The resulting dielectric barrier discharges inside the tubular channels yield a ferroelectret with high piezoelectricity. d(33) coefficients of up to 160 pC/N have already been achieved on the ferroelectret films. After charging at suitable elevated temperatures, the piezoelectricity is stable at temperatures of at least 130 degrees C. Advantages of the transducer films include ease of fabrication at laboratory or industrial scales, a wide range of possible geometrical and processing parameters, straightforward control of the uniformity of the polymer system, flexibility, and versatility of the soft ferroelectrets, and a large potential for device applications e.g., in the areas of biomedicine, communications, production engineering, sensor systems, environmental monitoring, etc.

Thermodynamic modeling of pyroelectric and piezoelectric properties of cellular polymers

A thermodynamic approach is presented to model devices manufactured with cellular polymers. They are heterogeneous nonpolar space-charge electrets that exhibit much higher piezoelectricity than the well-known ferroelectric polymers. Their pyroelectric and piezoelectric properties are characterized by adequate coefficients which quantify the performance of devices manufactured with those materials. The method presented in this contribution to calculate those coefficients is exact and consistent avoiding ad hoc simplifications introduced in other approaches. The results obtained by this method allow drawing conclusions regarding device optimization.

Detection of swallowing sounds: Methodology revisited

Cervical auscultation is in the process of gaining clinical credibility. In order for it to be accepted by the clinical community, the procedure and equipment used must first be standardized. Takahashi et al. [Dysphagia 9:54-62, 1994] attempted to provide benchmark methodology for administering cervical auscultation. They provided information about the acoustic detector unit best suited to picking up swallowing sounds and the best cervical site to place it. The current investigation provides contrasting results to Takahashi et al. with respect to the best type of acoustic detector unit to use for detecting swallowing sounds. Our study advocates an electret microphone as opposed to an accelerometer for recording swallowing sounds. However, we agree on the optimal placement site. We conclude that cervical auscultation is within reach of the average dysphagia clinic.

Major influencing factors of indoor radon concentrations in Switzerland.

PURPOSE: In Switzerland, nationwide large-scale radon surveys have been conducted since the early 1980s to establish the distribution of indoor radon concentrations (IRC). The aim of this work was to study the factors influencing IRC in Switzerland using univariate analyses that take into account biases caused by spatial irregularities of sampling. METHODS: About 212,000 IRC measurements carried out in more than 136,000 dwellings were available for this study. A probability map to assess risk of exceeding an IRC of 300 Bq/m(3) was produced using basic geostatistical techniques. Univariate analyses of IRC for different variables, namely the type of radon detector, various building characteristics such as foundation type, year of construction and building type, as well as the altitude, the average outdoor temperature during measurement and the lithology, were performed comparing 95% confidence intervals among classes of each variable. Furthermore, a map showing the spatial aggregation of the number of measurements was generated for each class of variable in order to assess biases due to spatially irregular sampling. RESULTS: IRC measurements carried out with electret detectors were 35% higher than measurements performed with track detectors. Regarding building characteristics, the IRC of apartments are significantly lower than individual houses. Furthermore, buildings with concrete foundations have the lowest IRC. A significant decrease in IRC was found in buildings constructed after 1900 and again after 1970. Moreover, IRC decreases at higher outdoor temperatures. There is also a tendency to have higher IRC with altitude. Regarding lithology, carbonate rock in the Jura Mountains produces significantly higher IRC, almost by a factor of 2, than carbonate rock in the Alps. Sedimentary rock and sediment produce the lowest IRC while carbonate rock from the Jura Mountains and igneous rock produce the highest IRC. Potential biases due to spatially unbalanced sampling of measurements were identified for several influencing factors. CONCLUSIONS: Significant associations were found between IRC and all variables under study. However, we showed that the spatial distribution of samples strongly affected the relevance of those associations. Therefore, future methods to estimate local radon hazards should take the multidimensionality of the process of IRC into account.

Thermal characterisation of doped InP using photoacoustic technique

An open cell photoacoustic configuration has been employed to evaluate the thermal diffusivity of pure InP as well as InP doped with sulphur and iron. Chopped optical radiation at 488 nm from an Ar-ion laser has been used to excite photoacoustic signals which been detected by a sensitive electret microphone. Thermal diffusivity value have been calculated from phase versus chopping frequency plots. Doped sample are found to show a reduced value for thermal diffusivity in comparison with intrinsically pure sample. The results have been interpreted in terms of the mechanisms of heat generation and transmission in semiconductors.

Analysis of acoustic frequency and wave amplitude generated by the Oscillatory Thoracic Thixotropic Device (Diottix(r)) in human chest

Diottix(r) was calibrated at 25 Hz to achieve the frequency indicated in literature as being effective to mobilize the airways secretions. However, the amplitude and frequency of the waves generated by the equipment in different regions of the chest still need to be investigated. The objective of this study was to analyze the frequency and amplitude of waves generated by Diottix(r) in chests of healthy subjects. Diottix(r) was used in the anterior and posterior regions of the chest. The mechanical waves were captured using stethoscopes connected to electret microphones, which were connected to a digital oscilloscope. Frequency and amplitude data were recorded by the stethoscope, positioned in six points in the anterior region and six in the posterior region of the chest, following the positions commonly used in pulmonary auscultation. Signals were recorded and transferred to a computer with software for their analysis. The frequency of waves did not present a significant change (from 24.9 to 26.4 Hz). The wave amplitude in the anterior versus the posterior region in each area of the lung, the upper, middle and lower, had differences. Diottix(r) produces frequencies in the chest according to the calibrated; thus, it can be a complementary resource to bronchial hygiene maneuvers. The amplitudes of waves seem to be affected by other structures like bone parts and heart.

Laminated Tubular-channel Ferroelectret Systems from Low-density Polyethylene Films and from Fluoroethylene-propylene Copolymer Films - A Comparison

A template-based lamination technique for the manufacture of ferroelectrets from uniform electret films was recently reported. In the present work, this technique is used to prepare similar ferroelectret structures from low-density polyethylene (LDPE) films and from fluoro-ethylene-propylene (FEP) copolymer films. A comparative analysis of the pressure-, temperature-, and frequency-dependent piezoelectric properties has been performed on the two ferroelectret systems. It is observed that the FEP ferroelectrets exhibit better piezoelectric responses and are thermally more stable. The difference between the piezoelectric d(33) coefficients of the two ferroelectret systems is partially explained here by their different elastic moduli. The anti-resonance peaks of both structures have been investigated by means of dielectric resonance spectroscopy and electroacoustic sound-pressure measurements. A difference of more than 10 kHz is observed between the anti-resonance frequencies of the two ferroelectret systems.

Medidas de radón en espacios de trabajo subterráneos del Campus de la Universidad de Alicante

Las medidas del gas radiactivo radón en lugares de trabajo subterráneos del Campus de la Universidad de Alicante fueron realizadas mediante dispositivos E-PERM® de corto plazo durante el invierno de 2010 y el verano de 2011. Las concentraciones de radón obtenidas muestran valores máximos de 73,8 Bq/m3 en invierno y 84,0 Bq/m3 en verano, así como una media aritmética de 30,3 Bq/m3. Aunque no se abordan concentraciones medias anuales, todos los resultados se encuentran por debajo de los valores recogidos en la Recomendación 90/143/EURATOM de la Comisión Europea relativa a la protección de la población contra los peligros de una exposición al radón en el interior de edificios así como los establecidos por la Instrucción IS-33 del Consejo de Seguridad Nuclear en lugares de trabajo, contribuyendo a la evaluación de la distribución de radón a nivel nacional y prestando atención a los problemas que este gas puede ocasionar en espacios subterráneos.