Efficient folding of proteins with multiple disulfide bonds in the Escherichia coli cytoplasm

Under physiological conditions, the Escherichia coli cytoplasm is maintained in a reduced state that strongly disfavors the formation of stable disulfide bonds in proteins. However, mutants in which the reduction of both thioredoxins and glutathione is impaired (trxB gor mutants) accumulate oxidized, enzymatically active alkaline phosphatase in the cytoplasm. These mutants grow very poorly in the absence of an exogenous reductant and accumulate extragenic suppressors at a high frequency. One such suppressor strain, FA113, grows almost as rapidly as the wild type in the absence of reductant, exhibits slightly faster kinetics of disulfide bond formation, and has fully induced activity of the transcriptional activator, OxyR. FA113 gave substantially higher yields of properly oxidized proteins compared with wild-type or trxB mutant strains. For polypeptides with very complex patterns of disulfide bonds, such as vtPA and the full-length tPA, the amount of active protein was further enhanced up to 15-fold by co-expression of TrxA (thioredoxin 1) mutants with different redox potentials, or 20-fold by the protein disulfide isomerase, DsbC. Remarkably, higher yields of oxidized, biologically active proteins were obtained by expression in the cytoplasm of E. coli FA113 compared with what could be achieved via secretion into the periplasm of a wild-type strain, even under optimized conditions. These results demonstrate that the cytoplasm can be rendered sufficiently oxidizing to allow efficient formation of native disulfide bonds without compromising cell viability.

Membrane Topology and Identification of Critical Amino Acid Residues in the Wzx O-Antigen Translocase from Escherichia coli O157:H4

Wzx belongs to a family of membrane proteins involved in the translocation of isoprenoid lipid-linked glycans, which is loosely related to members of the major facilitator superfamily. Despite Wzx homologs performing a conserved function, it has been difficult to pinpoint specific motifs of functional significance in their amino acid sequences. Here, we elucidate the topology of the Escherichia coli O157 Wzx (Wzx(EcO157)) by a combination of bioinformatics and substituted cysteine scanning mutagenesis, as well as targeted deletion-fusions to green fluorescent protein and alkaline phosphatase. We conclude that Wzx(EcO157) consists of 12 transmembrane (TM) helices and six periplasmic and five cytosolic loops, with N and C termini facing the cytoplasm. Four TM helices (II, IV, X, and XI) contain polar residues (aspartic acid or lysine), and they may form part of a relatively hydrophilic core. Thirty-five amino acid replacements to alanine or serine were targeted to five native cysteines and most of the aspartic acid, arginine, and lysine residues. From these, only replacements of aspartic acid-85, aspartic acid-326, arginine-298, and lysine-419 resulted in a protein unable to support O-antigen production. Aspartic acid-85 and lysine-419 are located in TM helices II and XI, while arginine-298 and aspartic acid-326 are located in periplasmic and cytosolic loops 4, respectively. Further analysis revealed that the charge at these positions is required for Wzx function since conservative substitutions maintaining the same charge polarity resulted in a functional protein, whereas those reversing or eliminating polarity abolished function. We propose that the functional requirement of charged residues at both sides of the membrane and in two TM helices could be important to allow the passage of the Und-PP-linked saccharide substrate across the membrane.

A single-component multidrug transporter of the major facilitator superfamily is part of a network that protects Escherichia coli from bile salt stress

Resistance to high concentrations of bile salts in the human intestinal tract is vital for the survival of enteric bacteria such as Escherichia coli. Although the tripartite AcrAB-TolC efflux system plays a significant role in this resistance, it is purported that other efflux pumps must also be involved. We provide evidence from a comprehensive suite of experiments performed at two different pH values (7.2 and 6.0) that reflect pH conditions that E. coli may encounter in human gut that MdtM, a single-component multidrug resistance transporter of the major facilitator superfamily, functions in bile salt resistance in E. coli by catalysing secondary active transport of bile salts out of the cell cytoplasm. Furthermore, assays performed on a chromosomal ΔacrB mutant transformed with multicopy plasmid encoding MdtM suggested a functional synergism between the single-component MdtM transporter and the tripartite AcrAB-TolC system that results in a multiplicative effect on resistance. Substrate binding experiments performed on purified MdtM demonstrated that the transporter binds to cholate and deoxycholate with micromolar affinity, and transport assays performed on inverted vesicles confirmed the capacity of MdtM to catalyse electrogenic bile salt/H(+) antiport.

Topological analysis of the Escherichia coli WcaJ protein reveals a new conserved configuration for the polyisoprenyl-phosphate hexose-1-phosphate transferase family

WcaJ is an Escherichia coli membrane enzyme catalysing the biosynthesis of undecaprenyl-diphosphate-glucose, the first step in the assembly of colanic acid exopolysaccharide. WcaJ belongs to a large family of polyisoprenyl-phosphate hexose-1-phosphate transferases (PHPTs) sharing a similar predicted topology consisting of an N-terminal domain containing four transmembrane helices (TMHs), a large central periplasmic loop, and a C-terminal domain containing the fifth TMH (TMH-V) and a cytosolic tail. However, the topology of PHPTs has not been experimentally validated. Here, we investigated the topology of WcaJ using a combination of LacZ/PhoA reporter fusions and sulfhydryl
labelling by PEGylation of novel cysteine residues introduced into a cysteine-less WcaJ. The results showed that the large central loop and the C-terminal tail both reside in the cytoplasm and are separated by TMH-V, which does not fully span the membrane, likely forming a "hairpin" structure. Modelling of TMH-V revealed that a highly conserved proline might contribute to a helix-break-helix structure in all PHPT members. Bioinformatic analyses show that all of these features are conserved in PHPT homologues from
Gram-negative and Gram-positive bacteria. Our data demonstrate a novel topological configuration for PHPTs, which is proposed as a signature for all members of this enzyme family

Étude de la biogenèse de l'autotransporteur AIDA-I d'Escherichia coli

Les autotransporteurs monomériques, appartenant au système de sécrétion de type V, correspondent à une famille importante de facteurs de virulence bactériens. Plusieurs fonctions, souvent essentielles pour le développement d’une infection ou pour le maintien et la survie des bactéries dans l’organisme hôte, ont été décrites pour cette famille de protéines. Malgré l’importance de ces protéines, notre connaissance de leur biogenèse et de leur mécanisme d’action demeure relativement limitée. L’autotransporteur AIDA-I, retrouvé chez diverses souches d’Escherichia coli, est un autotransporter multifonctionnel typique impliqué dans l’adhésion et l’invasion cellulaire ainsi que dans la formation de biofilm et d’agrégats bactériens. Les domaines extracellulaires d’autotransporteurs monomériques sont responsables de la fonctionnalité et possèdent pratiquement tous une structure caractéristique d’hélice β. Nous avons mené une étude de mutagenèse aléatoire avec AIDA-I afin de comprendre la base de la multifonctionnalité de cette protéine. Par cette approche, nous avons démontré que les domaines passagers de certains autotransporteurs possèdent une organisation modulaire, ce qui signifie qu’ils sont construits sous la forme de modules fonctionnels. Les domaines passagers d’autotransporteurs peuvent être clivés et relâchés dans le milieu extracellulaire. Toutefois, malgré la diversité des mécanismes de clivage existants, plusieurs protéines, telles qu’AIDA-I, sont clivées par un mécanisme qui demeure inconnu. En effectuant une renaturation in vitro d’AIDA-I, couplée avec une approche de mutagenèse dirigée, nous avons démontré que cette protéine se clive par un mécanisme autocatalytique qui implique deux acides aminés possédant un groupement carboxyle. Ces résultats ont permis la description d’un nouveau mécanisme de clivage pour la famille des autotransporteurs monomériques. Une des particularités d’AIDA-I est sa glycosylation par une heptosyltransférase spécifique nommée Aah. La glycosylation est un concept plutôt récent chez les bactéries et pour l’instant, très peu de protéines ont été décrites comme glycosylées chez E. coli. Nous avons démontré que Aah est le prototype pour une nouvelle famille de glycosyltransférases bactériennes retrouvées chez diverses espèces de protéobactéries. La glycosylation d’AIDA-I est une modification cytoplasmique et post-traductionnelle. De plus, Aah ne reconnaît pas une séquence primaire, mais plutôt un motif structural. Ces observations sont uniques chez les bactéries et permettent d’élargir nos connaissances sur la glycosylation chez les procaryotes. La glycosylation par Aah est essentielle pour la conformation d’AIDA-I et par conséquent pour sa capacité de permettre l’adhésion. Puisque plusieurs homologues d’Aah sont retrouvés à proximité d’autotransporteurs monomériques putatifs, cette famille de glycosyltranférases pourrait être importante, sinon essentielle, pour la biogenèse et/ou la fonction de nombreux autotransporteurs. En conclusion, les résultats présentés dans cette thèse apportent de nouvelles informations et permettent une meilleure compréhension de la biogenèse d’une des plus importantes familles de protéines sécrétées chez les bactéries Gram négatif.

Expression of soluble and functional full-length human matrix metalloproteinase-2 in Escherichia coli

Characterization of the matrix metalloproteinase-2 (MMP-2) substrates and understanding of its function remain difficult because up to date preparations containing minor amounts of other eukaryotic proteins that are co-purified with MMP-2 are still used. In this work, the expression of a soluble and functional full-length recombinant human MMP-2 (rhMMP-2) in the cytoplasm of Escherichia coli is reported, and the purification of this metalloproteinase is described. Culture of this bacterium at 18 degrees C culminated in maintenance of the soluble and functional rhMMP-2 in the soluble fraction of the E. coli lysate and its purification by affinity with gelatin-sepharose yielded approximately 0.12 mg/L of medium. Western Blotting and zymographic analysis revealed that the most abundant form was the 72-kDa MMP-2, but some gelatinolytic bands corresponding to proteins with lower molecular weight were also detected. The obtained rhMMP-2 was demonstrated to be functional in a gelatinolytic fluorimetric assay, suggesting that the purified rhMMP-2 was correctly folded. The method described here involves fewer steps, is less expensive, and is less prone to contamination with other proteinases and MMP inhibitors as compared to expression of rhMMP-2 in eukaryotic tissue culture. This protocol will facilitate the use of the full-length rhMMP-2 expressed in bacteria and will certainly help researchers to acquire new knowledge about the substrates and biological activities of this important proteinase. (C) 2011 Elsevier B.V. All rights reserved.

Funktion der C 4-Dicarboxylat-Transporter DctA und DcuB als Co-Sensoren von DcuS in Escherichia coli

Escherichia coli kann C4-Dicarboxylate sowohl unter aeroben als auch unter anaeroben Bedingungen zur Energiekonservierung nutzen. Die Synthese der beteiligten Transporter und Enzyme wird auf der Transkriptionsebene durch das Zweikomponentensystem DcuSR reguliert. DcuS ist der Sensor für C4-Dicarboxylate. Der Antwortregulator DcuR wird von DcuS aktiviert und induziert die Expression des C4-Dicarboxylat-Transporters DctA unter aeroben Verhältnissen. Anaerob verstärkt DcuSR die Expression des Fumarat/Succinat-Antiporters DcuB, der Fumarase B und der Fumaratreduktase FrdABCD. DctA und DcuB agieren als Co-Sensoren von DcuS und üben einen negativen Effekt auf die Genexpression von dctA bzw. dcuB aus.rnIn dieser Arbeit wurde die Funktion von DctA und DcuB als Co-Sensoren von DcuS untersucht. Sowohl für DcuB als auch für DctA wurde eine direkte Protein-Protein-Interaktion mit DcuS über ein bakterielles Two-Hybrid System nachgewiesen. DcuS bildete ein Transporter-Sensor-Cluster mit DctA und DcuB. C-terminale Verkürzung und die Mutagenese einzelner Aminosäuren der C-terminalen Helix 8b von DctA führten zu einem Verlust der Interaktion mit DcuS. Mit dieser Interaktion gingen sowohl die regulatorische Funktion als auch die Transportfunktion der Punktmutante DctA-L414A verloren. Ein Verlust der Interaktion wurde ebenfalls zwischen einer konstitutiv aktiven DcuS-Mutante und wildtypischem DctA beobachtet. Ebenso zeigte sich eine partielle Reduktion der Interaktion von DcuS mit DctA, wenn DcuS nach der zweiten Transmembranhelix verkürzt wurde. Die Interaktion zwischen DcuS und DctA wurde durch den Effektor Fumarat modifiziert, ging aber nicht komplett verloren.rnDctA konnte in verschiedenen Plasmidsystemen überproduziert werden und bildete Homotrimere. Die Topologie von DctA wurde mit experimentellen und in silico Methoden aufgeklärt. DctA ähnelt der Struktur und Topologie des Aminosäuretransporters Glt aus Pyrococcus horikoshii. DctA besitzt acht Transmembranhelices mit einem cytosolischen N- und C-Terminus sowie zwei Haarnadelschleifen. Die Substratbindung findet höchstwahrscheinlich in den Haarnadelschleifen statt und der Transport erfolgt nach dem „alternating access“ Modell.rnAußerdem wurde die Funktion des Transporters YfcC untersucht. Das Gen yfcC wurde mit Schlüsselgenen des Acetatstoffwechsels co-transkribiert. In yfcC-Deletionsstämmen zeigte sich ein stammspezifischer Defekt bei Wachstum mit Acetat und Transport von Acetat.

The reductive enzyme thioredoxin 1 acts as an oxidant when it is exported to the Escherichia coli periplasm

Thioredoxin 1 is a major thiol-disulfide oxidoreductase in the cytoplasm of Escherichia coli. One of its functions is presumed to be the reduction of the disulfide bond in the active site of the essential enzyme ribonucleotide reductase. Thioredoxin 1 is kept in a reduced state by thioredoxin reductase. In a thioredoxin reductase null mutant however, most of thioredoxin 1 is in the oxidized form; recent reports have suggested that this oxidized form might promote disulfide bond formation in vivo. In the Escherichia coli periplasm, the protein disulfide isomerase DsbC is maintained in the reduced and active state by the membrane protein DsbD. In a dsbD null mutant, DsbC accumulates in the oxidized form. This oxidized form is then able to promote disulfide bond formation. In both these cases, the inversion of the function of these thiol oxidoreductases appears to be due to an altered redox balance of the environment in which they find themselves. Here, we show that thioredoxin 1 attached to the alkaline phosphatase signal sequence can be exported into the E. coli periplasm. In this new environment for thioredoxin 1, we show that thioredoxin 1 can promote disulfide bond formation and, therefore, partially complement a dsbA strain defective for disulfide bond formation. Thus, we provide evidence that by changing the location of thioredoxin 1 from cytoplasm to periplasm, we change its function from a reductant to an oxidant. We conclude that the in vivo redox function of thioredoxin 1 depends on the redox environment in which it is localized.

Localization of GAR transformylase in Escherichia coli and mammalian cells

Enzymes of the de novo purine biosynthetic pathway may form a multienzyme complex to facilitate substrate flux through the ten serial steps constituting the pathway. One likely strategy for complex formation is the use of a structural scaffold such as the cytoskeletal network or subcellular membrane of the cell to mediate protein–protein interactions. To ascertain whether this strategy pertains to the de novo purine enzymes, the localization pattern of the third purine enzyme, glycinamide ribonucleotide transformylase (GAR Tfase) was monitored in live Escherichia coli and mammalian cells. Genes encoding human as well as E. coli GAR Tfase fused with green fluorescent protein (GFP) were introduced into their respective cells with regulated expression of proteins and localization patterns monitored by using confocal fluorescence microscopy. In both instances images showed proteins to be diffused throughout the cytoplasm. Thus, GAR Tfase is not localized to an existing cellular architecture, so this device is probably not used to concentrate the members of the pathway. However, discrete clusters of the pathway may still exist throughout the cytoplasm.

Isolation of a cDNA encoding human holocarboxylase synthetase by functional complementation of a biotin auxotroph of Escherichia coli.

Holocarboxylase synthetase (HCS) catalyzes the biotinylation of the four biotin-dependent carboxylases in human cells. Patients with HCS deficiency lack activity of all four carboxylases, indicating that a single HCS is targeted to the mitochondria and cytoplasm. We isolated 21 human HCS cDNA clones, in four size classes of 2.0-4.0 kb, by complementation of an Escherichia coli birA mutant defective in biotin ligase. Expression of the cDNA clones promoted biotinylation of the bacterial biotinyl carboxyl carrier protein as well as a carboxyl-terminal fragment of the alpha subunit of human propionyl-CoA carboxylase expressed from a plasmid. The open reading frame encodes a predicted protein of 726 aa and M(r) 80,759. Northern blot analysis revealed the presence of a 5.8-kb major species and 4.0-, 4.5-, and 8.5-kb minor species of poly(A)+ RNA in human tissues. Human HCS shows specific regions of homology with the BirA protein of E. coli and the presumptive biotin ligase of Paracoccus denitrificans. Several forms of HCS mRNA are generated by alternative splicing, and as a result, two mRNA molecules bear different putative translation initiation sites. A sequence upstream of the first translation initiation site encodes a peptide structurally similar to mitochondrial presequences, but it lacks an in-frame ATG codon to direct its translation. We anticipate that alternative splicing most likely mediates the mitochondrial versus cytoplasmic expression, although the elements required for directing the enzyme to the mitochondria remain to be confirmed.

Copper sensitivity of cueO mutants of Escherichia coli K-12 and the biochemical suppression of this phenotype

The cueO gene of Escherichia coli encodes a multi-copper oxidase, which contributes to copper tolerance in this bacterium. It was observed that a cueO mutant was highly sensitive to killing by copper ions when cells were grown on defined minimal media. Copper sensitivity was correlated with accumulation of copper in the mutant strain. Growth of the cueO mutant in the presence of copper could be restored by addition of divalent zinc and manganese ions or ferrous iron but not by other first row transition metal ions or magnesium ions. Copper toxicity towards a cueO mutant Could also be suppressed by addition of the superoxide quencher 1,2-dihydroxybenzene-3,5-disulfonic acid (tiron), suggesting that a primary cause of copper toxicity is the copper-catalyzed production of superoxide anions in the cytoplasm. (C) 2005 Elsevier Inc. All rights reserved.

Highly discriminatory single-nucleotide polymorphism interrogation of Escherichia coli by use of allele-specific real-time PCR and eBURST analysis

In total, 782 Escherichia coli strains originating from various host sources have been analyzed in this study by using a highly discriminatory single-nucleotide polymorphism (SNP) approach. A set of eight SNPs, with a discrimination value (Simpson's index of diversity [D]) of 0.96, was determined using the Minimum SNPs software, based on sequences of housekeeping genes from the E. coli multilocus sequence typing (MLST) database. Allele-specific real-time PCR was used to screen 114 E. coli isolates from various fecal sources in Southeast Queensland (SEQ). The combined analysis of both the MLST database and SEQ E. coli isolates using eight high-D SNPs resolved the isolates into 74 SNP profiles. The data obtained suggest that SNP typing is a promising approach for the discrimination of host-specific groups and allows for the identification of human-specific E. coli in environmental samples. However, a more diverse E. coli collection is required to determine animal- and environment-specific E. coli SNP profiles due to the abundance of human E. coli strains (56%) in the MLST database.

Development and validation of novel methods for microbial source tracking based on Escherichia coli as an indicator of water quality

Microbial pollution in water periodically affects human health in Australia, particularly in times of drought and flood. There is an increasing need for the control of waterborn microbial pathogens. Methods, allowing the determination of the origin of faecal contamination in water, are generally referred to as Microbial Source Tracking (MST). Various approaches have been evaluated as indicatorsof microbial pathogens in water samples, including detection of different microorganisms and various host-specific markers. However, until today there have been no universal MST methods that could reliably determine the source (human or animal) of faecal contamination. Therefore, the use of multiple approaches is frequently advised. MST is currently recognised as a research tool, rather than something to be included in routine practices. The main focus of this research was to develop novel and universally applicable methods to meet the demands for MST methods in routine testing of water samples. Escherichia coli was chosen initially as the object organism for our studies as, historically and globally, it is the standard indicator of microbial contamination in water. In this thesis, three approaches are described: single nucleotide polymorphism (SNP) genotyping, clustered regularly interspaced short palindromic repeats (CRISPR) screening using high resolution melt analysis (HRMA) methods and phage detection development based on CRISPR types. The advantage of the combination SNP genotyping and CRISPR genes has been discussed in this study. For the first time, a highly discriminatory single nucleotide polymorphism interrogation of E. coli population was applied to identify the host-specific cluster. Six human and one animal-specific SNP profile were revealed. SNP genotyping was successfully applied in the field investigations of the Coomera watershed, South-East Queensland, Australia. Four human profiles [11], [29], [32] and [45] and animal specific SNP profile [7] were detected in water. Two human-specific profiles [29] and [11] were found to be prevalent in the samples over a time period of years. The rainfall (24 and 72 hours), tide height and time, general land use (rural, suburban), seasons, distance from the river mouth and salinity show a lack of relashionship with the diversity of SNP profiles present in the Coomera watershed (p values > 0.05). Nevertheless, SNP genotyping method is able to identify and distinquish between human- and non-human specific E. coli isolates in water sources within one day. In some samples, only mixed profiles were detected. To further investigate host-specificity in these mixed profiles CRISPR screening protocol was developed, to be used on the set of E. coli, previously analysed for SNP profiles. CRISPR loci, which are the pattern of previous DNA coliphages attacks, were considered to be a promising tool for detecting host-specific markers in E. coli. Spacers in CRISPR loci could also reveal the dynamics of virulence in E. coli as well in other pathogens in water. Despite the fact that host-specificity was not observed in the set of E. coli analysed, CRISPR alleles were shown to be useful in detection of the geographical site of sources. HRMA allows determination of ‘different’ and ‘same’ CRISPR alleles and can be introduced in water monitoring as a cost-effective and rapid method. Overall, we show that the identified human specific SNP profiles [11], [29], [32] and [45] can be useful as marker genotypes globally for identification of human faecal contamination in water. Developed in the current study, the SNP typing approach can be used in water monitoring laboratories as an inexpensive, high-throughput and easy adapted protocol. The unique approach based on E. coli spacers for the search for unknown phage was developed to examine the host-specifity in phage sequences. Preliminary experiments on the recombinant plasmids showed the possibility of using this method for recovering phage sequences. Future studies will determine the host-specificity of DNA phage genotyping as soon as first reliable sequences can be acquired. No doubt, only implication of multiple approaches in MST will allow identification of the character of microbial contamination with higher confidence and readability.