An overview of the MPEG-7 description definition language (DDL)

This paper presents an overview of the MPEG-7 Description Definition Language (DDL). The DDL provides the syntactic rules for creating, combining, extending and refining MPEG-7 Descriptors (Ds) and Description Schemes (DSs), In the interests of interoperability, the W3C's XML Schema language, with the addition of certain MPEG-7-specific extensions, has been chosen as the DDL. This paper describes the background to this decision and using examples, provides an overview of the core XML, schema features used within MPEG-7 and the extensions made in order to satisfy the MPEG-7 DDL requirements.

El precio de la igualdad - Análisis de la regulación del trabajo doméstico desde el DDL

El presente artículo realiza una crítica a la regulación actual del trabajo doméstico y a la últimareforma legal sobre la materia, que incluyó la economía del cuidado en las cuentas nacionales.La autora argumenta que el derecho crea los incentivos suficientes para producir a lasmujeres como actores ineficientes del mercado, utilizando mecanismos legales que disponenlas obligaciones femeninas como prestaciones naturales asociadas con la maternidad y elcuidado del hogar. Los costos que socialmente pagamos por sostener la opresión femeninaestán externalizados en esquemas como el sistema de salud, el diseño pensional y la brechade igualdad salarial para las mujeres. El artículo concluye mostrando cómo la contingenciade la regulación actual del trabajo doméstico y el costo social asociado a ella puede alterarsecon reformas incrementales que aumenten el posicionamiento social de las mujeres entérminos de poder y recursos.

Genomic islands in the pathogenic filamentous fungus Aspergillus fumigatus

We present the genome sequences of a new clinical isolate of the important human pathogen, Aspergillus fumigatus, A1163, and two closely related but rarely pathogenic species, Neosartorya fischeri NRRL181 and Aspergillus clavatus NRRL1. Comparative genomic analysis of A1163 with the recently sequenced A. fumigatus isolate Af293 has identified core, variable and up to 2% unique genes in each genome. While the core genes are 99.8% identical at the nucleotide level, identity for variable genes can be as low 40%. The most divergent loci appear to contain heterokaryon incompatibility ( het) genes associated with fungal programmed cell death such as developmental regulator rosA. Cross-species comparison has revealed that 8.5%, 13.5% and 12.6%, respectively, of A. fumigatus, N. fischeri and A. clavatus genes are species-specific. These genes are significantly smaller in size than core genes, contain fewer exons and exhibit a subtelomeric bias. Most of them cluster together in 13 chromosomal islands, which are enriched for pseudogenes, transposons and other repetitive elements. At least 20% of A. fumigatus-specific genes appear to be functional and involved in carbohydrate and chitin catabolism, transport, detoxification, secondary metabolism and other functions that may facilitate the adaptation to heterogeneous environments such as soil or a mammalian host. Contrary to what was suggested previously, their origin cannot be attributed to horizontal gene transfer ( HGT), but instead is likely to involve duplication, diversification and differential gene loss (DDL). The role of duplication in the origin of lineage-specific genes is further underlined by the discovery of genomic islands that seem to function as designated ""gene dumps'' and, perhaps, simultaneously, as "" gene factories''.

Effect of ionic strength and clay mineralogy on Na-Ca exchange and the SAR-ESP relationship

The relationship between sodium adsorption ratio (SAR) and exchangeable sodium percentage (ESP) for all soils has traditionally been assumed to be similar to that developed by the United States Salinity Laboratory (USSL) in 1954. However, under certain conditions, this relationship has been shown not to be constant, but to vary with both ionic strength and clay mineralogy. We conducted a detailed experiment to determine the effect of ionic strength on the Na+-Ca2+ exchange of four clay minerals (kaolinite, illite, pyrophyllite, and montmorillonite), with results related to the diffuse double-layer (DDL) model. Clays in which external exchange sites dominated (kaolinite and pyrophyllite) tended to show an overall preference for Na+, with the magnitude of this preference increasing with decreasing ESP. For these external surfaces, increases in ionic strength were found to increase preference for Na+. Although illite (2:1 non-expanding mineral) was expected to be dominated by external surfaces, this clay displayed an overall preference for Ca2+, possibly indicating the opening of quasicrystals and the formation of internal exchange surfaces. For the expanding 2:1 clay, montmorillonite, Na+-Ca2+ exchange varied due to the formation of quasicrystals (and internal exchange surfaces) from individual clay platelets. At small ionic strength and large ESP, the clay platelets dispersed and were dominated by external exchange surfaces (displaying preference for Na+). However, as ionic strength increased and ESP decreased, quasicrystals (and internal exchange surfaces) formed, and preference for Ca2+ increased. Therefore, the relationship between SAR and ESP is not constant and should be determined directly for the soil of interest.

Training and discovering corpus-based data driven exercices in english teaching (L2/FL) to native speakers of portuguese (L1)

Project submitted as part requirement for the degree of Masters in English teaching,

Integrated data model and DSL modifications

Companies are increasingly more and more dependent on distributed web-based software systems to support their businesses. This increases the need to maintain and extend software systems with up-to-date new features. Thus, the development process to introduce new features usually needs to be swift and agile, and the supporting software evolution process needs to be safe, fast, and efficient. However, this is usually a difficult and challenging task for a developer due to the lack of support offered by programming environments, frameworks, and database management systems. Changes needed at the code level, database model, and the actual data contained in the database must be planned and developed together and executed in a synchronized way. Even under a careful development discipline, the impact of changing an application data model is hard to predict. The lifetime of an application comprises changes and updates designed and tested using data, which is usually far from the real, production, data. So, coding DDL and DML SQL scripts to update database schema and data, is the usual (and hard) approach taken by developers. Such manual approach is error prone and disconnected from the real data in production, because developers may not know the exact impact of their changes. This work aims to improve the maintenance process in the context of Agile Platform by Outsystems. Our goal is to design and implement new data-model evolution features that ensure a safe support for change and a sound migration process. Our solution includes impact analysis mechanisms targeting the data model and the data itself. This provides, to developers, a safe, simple, and guided evolution process.

Aprendizagem baseada na resolução de problemas: uma experiência pedagógica com alunos de um Curso de Especialização Tecnológica

Relatório de estágio de mestrado em Ensino de Informática

Evaluation of inflammatory response induced by different types of daily contact lenses

Dissertação de mestrado em Genética Molecular

Síntesis de derivados nucleosídicos con potencial actividad antiviral

La infección por el Virus de Inmunodeficiencia Humana tipo 1 (HIV-1), agente causal del Síndrome de Inmunodeficiencia Adquirida (SIDA) está descripta como la epidemia más importante de los '90 y tal vez del siglo. A pesar de los esfuerzos a nivel mundial, no ha sido exitosa la obtención de compuestos efectivos para la profilaxis y tratamiento del SIDA con un índice terapéutico óptimo. Dado que el HIV-1 es un retrovirus, la transcriptasa reversa se ha convertido en un objetivo importante en la quimioterapia de esta enfermedad. Clínicamente se utiliza como inhibidor de dicha enzima, la zidovudina (3'-azido-3'-deoxitimidina, AZT, 1) y como drogas alternativas en pacientes infectados con el virus HIV, que no responden a la monoterapia con AZT, la zalcitabina (2',3'-dideoxicitidina, ddC, 2) y la didanosina (2',3'-dideoxiinosina, ddl, 3). Estos nucleósidos, al igual que el AZT, actúan como finalizadores de la cadena proviral e inhibidores competitivos de la transcriptasa reversa. Nuestro grupo de trabajo está abocado a la búsqueda de nuevas alternativas terapéuticas y, por lo tanto, encaró la síntesis de análogos de AZT por introducción de halógenos (3'-azido-6-bromo-3'-deoxitimidina, AZT-Br) y por asociación molecular con derivados del ácido isonicotínico (3'-azido-3'-deoxi-5'-O-isonicotinoiltimidina, AZT-ISO). Estos compuestos demostraron poseer una muy importante actividad biológica frente a HIV-1 y una moderada (pero significativa desde el punto de vista terapéutico) actividad frente a infecciones bacterianas. Basándonos en estos alentadores resultados hemos continuado la síntesis de derivadores de AZT con la finalidad de realizar estudios sobre Relación Estructura-Actividad Biológica (QSAR), para lo cual es necesario tener una base de datos lo más completa posible. El trabajo tiene como objetivo la obtención de nuevos fármacos que modulen la conducta farmacocinética de los principales agentes utilizados actualmente en la terapia contra el Virus de la Inmunodeficiencia Humana (AZT, ddC, ddl). Para tal fin, planificamos la síntesis de derivados de AZT (1), ddC (2) y ddl (3), por modificación de la posición-5'. Dicha modificación favorecerá la farmacocinética de esas drogas ya que puede disminuir la glucoronidación de la posición-5' y, por lo tanto, la velocidad de metabolización. Además, dado que actualmente la terapia para el SIDA involucra el tratamiento de las infecciones oportunistas (principalmente la tuberculosis), se propone la asociación de 1-3 con ácido p-aminosalicílico (PAS, 4).

Combinatorial Synthesis and Biological Evaluation of Inhibitors of D-Ala-D-Ala-Ligase

Report for the scientific sojourn carried out at the Max Planck Institut of Molecular Phisiology, Germany, from 2006 to 2008.The work carried out during this postdoctoral stage was focused on two different projects. Firstly, identification of D-Ala D-Ala Inhibitors and the development of new synthethic approaches to obtain lipidated peptides and proteins and the use of these lipidated proteins in biological and biophysical studies. In the first project, new D-Ala D-Ala inhibitors were identified by using structural alignments of the ATP binding sites of the bacterial ligase DDl and protein and lipid kinases in complex with ATP analogs. We tested a series of commercially available kinase inhibitors and found LFM-A13 and Tyrphostine derivatives to inhibit DDl enzyme activity. Based on the initial screening results we synthesized a series of malononitrilamide and salicylamide derivatives and were able to confirm the validity of these scaffolds as inhibitors of DDl. From this investigation we gained a better understanding of the structural requirements and limitations necessary for the preparation of ATP competitive DDl inhibitors. The compounds in this study may serve as starting points for the development of bi-substrate inhibitors that incorporate both, an ATP competitive and a substrate competitive moiety. Bisubstrate inhibitors that block the ATP and D-Ala binding sites should exhibit enhanced selectivity and potency profiles by preferentially inhibiting DDl over kinases. In the second project, an optimized synthesis for tha alkylation of cysteins using the thiol ene reaction was establisehd. This new protocol allowed us to obtain large amounts of hexadecylated cysteine that was required for the synthesis of differently lipidated peptides. Afterwards the synthesis of various N-ras peptides bearing different lipid anchors was performed and the peptides were ligated to a truncated N-ras protein. The influence of this differently lipidated N-ras proteins on the partioning and association of N-Ras in model membrane subdomains was studied using Atomic Force Microscopy.

Vancomycin-dependent Enterococcus faecium vanA: characterization of the first case isolated in a university hospital in Brazil

In this study, we report the characterization of a strain of Enterococcus faecium vanA, which grows only in the presence of vancomycin (VDEfm-UEL). The bacterium was isolated from the feces of a female patient who had undergone surgical treatment of Reinke’s edema and was receiving intravenous vancomycin therapy for infection with methicillin/oxacillin-resistant Staphylococcus aureus, a postoperative complication. Antimicrobial dependence was further confirmed by the vancomycin E-test. VDEfm-UEL was also shown to be resistant to ampicillin, ciprofloxacin, chloramphenicol, erythromycin, levofloxacin, penicillin, rifampicin, and teicoplanin. The putative virulence genes efaA, gelE and esp were detected by PCR. The ddl gene from VDEfm-UEL was cloned and sequenced. Vancomycin dependence seems to be associated with the insertion of a nucleotide in that sequence, which results in a frame-shift mutation, introducing a premature stop codon. This is the first report of vancomycin-dependent E. faecium isolation in a university hospital in Brazil.

Suivi des vaisseaux sanguins en temps réel à partir d’images ultrasonores mode-B et reconstruction 3D : application à la caractérisation des sténoses artérielles

La maladie des artères périphériques (MAP) se manifeste par une réduction (sténose) de la lumière de l’artère des membres inférieurs. Elle est causée par l’athérosclérose, une accumulation de cellules spumeuses, de graisse, de calcium et de débris cellulaires dans la paroi artérielle, généralement dans les bifurcations et les ramifications. Par ailleurs, la MAP peut être causée par d`autres facteurs associés comme l’inflammation, une malformation anatomique et dans de rares cas, au niveau des artères iliaques et fémorales, par la dysplasie fibromusculaire. L’imagerie ultrasonore est le premier moyen de diagnostic de la MAP. La littérature clinique rapporte qu’au niveau de l’artère fémorale, l’écho-Doppler montre une sensibilité de 80 à 98 % et une spécificité de 89 à 99 % à détecter une sténose supérieure à 50 %. Cependant, l’écho-Doppler ne permet pas une cartographie de l’ensemble des artères des membres inférieurs. D’autre part, la reconstruction 3D à partir des images échographiques 2D des artères atteintes de la MAP est fortement opérateur dépendant à cause de la grande variabilité des mesures pendant l’examen par les cliniciens. Pour planifier une intervention chirurgicale, les cliniciens utilisent la tomodensitométrie (CTA), l’angiographie par résonance magnétique (MRA) et l’angiographie par soustraction numérique (DSA). Il est vrai que ces modalités sont très performantes. La CTA montre une grande précision dans la détection et l’évaluation des sténoses supérieures à 50 % avec une sensibilité de 92 à 97 % et une spécificité entre 93 et 97 %. Par contre, elle est ionisante (rayon x) et invasive à cause du produit de contraste, qui peut causer des néphropathies. La MRA avec injection de contraste (CE MRA) est maintenant la plus utilisée. Elle offre une sensibilité de 92 à 99.5 % et une spécificité entre 64 et 99 %. Cependant, elle sous-estime les sténoses et peut aussi causer une néphropathie dans de rares cas. De plus les patients avec stents, implants métalliques ou bien claustrophobes sont exclus de ce type d`examen. La DSA est très performante mais s`avère invasive et ionisante. Aujourd’hui, l’imagerie ultrasonore (3D US) s’est généralisée surtout en obstétrique et échocardiographie. En angiographie il est possible de calculer le volume de la plaque grâce à l’imagerie ultrasonore 3D, ce qui permet un suivi de l’évolution de la plaque athéromateuse au niveau des vaisseaux. L’imagerie intravasculaire ultrasonore (IVUS) est une technique qui mesure ce volume. Cependant, elle est invasive, dispendieuse et risquée. Des études in vivo ont montré qu’avec l’imagerie 3D-US on est capable de quantifier la plaque au niveau de la carotide et de caractériser la géométrie 3D de l'anastomose dans les artères périphériques. Par contre, ces systèmes ne fonctionnent que sur de courtes distances. Par conséquent, ils ne sont pas adaptés pour l’examen de l’artère fémorale, à cause de sa longueur et de sa forme tortueuse. L’intérêt pour la robotique médicale date des années 70. Depuis, plusieurs robots médicaux ont été proposés pour la chirurgie, la thérapie et le diagnostic. Dans le cas du diagnostic artériel, seuls deux prototypes sont proposés, mais non commercialisés. Hippocrate est le premier robot de type maitre/esclave conçu pour des examens des petits segments d’artères (carotide). Il est composé d’un bras à 6 degrés de liberté (ddl) suspendu au-dessus du patient sur un socle rigide. À partir de ce prototype, un contrôleur automatisant les déplacements du robot par rétroaction des images échographiques a été conçu et testé sur des fantômes. Le deuxième est le robot de la Colombie Britannique conçu pour les examens à distance de la carotide. Le mouvement de la sonde est asservi par rétroaction des images US. Les travaux publiés avec les deux robots se limitent à la carotide. Afin d’examiner un long segment d’artère, un système robotique US a été conçu dans notre laboratoire. Le système possède deux modes de fonctionnement, le mode teach/replay (voir annexe 3) et le mode commande libre par l’utilisateur. Dans ce dernier mode, l’utilisateur peut implémenter des programmes personnalisés comme ceux utilisés dans ce projet afin de contrôler les mouvements du robot. Le but de ce projet est de démontrer les performances de ce système robotique dans des conditions proches au contexte clinique avec le mode commande libre par l’utilisateur. Deux objectifs étaient visés: (1) évaluer in vitro le suivi automatique et la reconstruction 3D en temps réel d’une artère en utilisant trois fantômes ayant des géométries réalistes. (2) évaluer in vivo la capacité de ce système d'imagerie robotique pour la cartographie 3D en temps réel d'une artère fémorale normale. Pour le premier objectif, la reconstruction 3D US a été comparée avec les fichiers CAD (computer-aided-design) des fantômes. De plus, pour le troisième fantôme, la reconstruction 3D US a été comparée avec sa reconstruction CTA, considéré comme examen de référence pour évaluer la MAP. Cinq chapitres composent ce mémoire. Dans le premier chapitre, la MAP sera expliquée, puis dans les deuxième et troisième chapitres, l’imagerie 3D ultrasonore et la robotique médicale seront développées. Le quatrième chapitre sera consacré à la présentation d’un article intitulé " A robotic ultrasound scanner for automatic vessel tracking and three-dimensional reconstruction of B-mode images" qui résume les résultats obtenus dans ce projet de maîtrise. Une discussion générale conclura ce mémoire. L’article intitulé " A 3D ultrasound imaging robotic system to detect and quantify lower limb arterial stenoses: in vivo feasibility " de Marie-Ange Janvier et al dans l’annexe 3, permettra également au lecteur de mieux comprendre notre système robotisé. Ma contribution dans cet article était l’acquisition des images mode B, la reconstruction 3D et l’analyse des résultats pour le patient sain.

Um metamodelo da linguagem de modelagem real time UML, de suporte à criação de dicionário de dados para ferramentas de modelagem de sistema tempo real, visando a verificação de consistência dos modelos

A computação de tempo real é uma das áreas mais desafiadoras e de maior demanda tecnológica da atualidade. Está diretamente ligada a aplicações que envolvem índices críticos de confiabilidade e segurança. Estas características, inerentes a esta área da computação, vêm contribuindo para o aumento da complexidade dos sistemas tempo real e seu conseqüente desenvolvimento. Isto fez com que mecanismos para facilitar especificação, delimitação e solução de problemas passem a ser itens importantes para tais aplicações. Este trabalho propõe mecanismos para atuarem no desenvolvimento de sistemas de tempo real, com o objetivo de serem empregados como ferramenta de apoio no problema da verificação de presença de inconsistências, que podem vir a ocorrer nos vários modelos gerados partir da notação da linguagem de modelagem gráfica para sistemas de tempo real - UML-RT(Unified Modeling Language for Real Time). Estes mecanismos foram projetados através da construção de um metamodelo dos conceitos presentes nos diagramas de classe, de objetos, de seqüência, de colaboração e de estados. Para construir o metamodelo, utiliza-se a notação do diagrama de classes da UML (Unified Modeling Language). Contudo, por intermédio das representações gráficas do diagrama de classes não é possível descrever toda a semântica presente em tais diagramas. Assim, regras descritas em linguagem de modelagem OCL (Object Constraint Language) são utilizadas como um formalismo adicional ao metamodelo. Com estas descrições em OCL será possível a diminuição das possíveis ambigüidades e inconsistências, além de complementar as limitações impostas pelo caráter gráfico da UML. O metamodelo projetado é mapeado para um modelo Entidade&Relacionamento. A partir deste modelo, são gerados os scripts DDL (Data Definition Language) que serão usados na criação do dicionário de dados, no banco de dados Oracle. As descrições semânticas escritas através de regras em OCL são mapeadas para triggers, que disparam no momento em que o dicionário de dados é manipulado. O MET Editor do SiMOO-RT é a ferramenta diagramática que faz o povoamento dos dados no dicionário de dados. SiMOO-RT é uma ferramenta orientada a objetos para a modelagem, simulação e geração automática de código para sistemas de tempo real.