The Influence of Adjacent Segment on the Reliability of Cu Dual Damascene Interconnects

Three terminal ‘dotted-I’ interconnect structures, with vias at both ends and an additional via in the middle, were tested under various test conditions. Mortalities (failures) were found in right segments with jL value as low as 1250 A/cm, and the mortality of a dotted-I segment is dependent on the direction and magnitude of the current in the adjacent segment. Some mortalities were also found in the right segments under a test condition where no failure was expected. Cu extrusion along the delaminated Cu/Si₃N₄ interface near the central via region was believed to cause the unexpected failures. From the time-to-failure (TTF), it is possible to quantify the Cu/Si₃N₄ interfacial strength and bonding energy. Hence, the demonstrated test methodology can be used to investigate the integrity of the Cu dual damascene processes. As conventionally determined critical jL values in two-terminal via-terminated lines cannot be directly applied to interconnects with branched segments, this also serves as a good methodology to identify the critical effective jL values for immortality.

Self-dual continuous processes

The important application of semi-static hedging in financial markets naturally leads to the notion of conditionally quasi self-dual processes which is, for continuous semimartingales, related to conditional symmetry properties of both their ordinary as well as their stochastic logarithms. We provide a structure result for continuous conditionally quasi self-dual processes. Our main result is to give a characterization of continuous Ocone martingales via a strong version of self-duality.

Thiram in the environment: effect of humic substances and Cu(II) ions

Em Portugal, o tirame é um dos fungicidas mais utilizados, cujas vendas aumentaram significativamente nos últimos anos, sendo também um dos fungicidas mais utilizados em todo o mundo. No entanto, em comparação com outros pesticidas, existe falta de informação na literatura sobre o seu comportamento em sistemas ambientais, nomeadamente, no que diz respeito à sua degradação no solo ou em águas e produtos a que dá origem. Neste contexto, o objetivo deste trabalho foi estudar a influência das substâncias húmicas e iões cobre no comportamento e destino do tirame no meio ambiente. Foram realizados vários estudos para analisar o comportamento do tirame em solos com diferentes conteúdos de matéria orgânica e de iões cobre, e em águas naturais, estudando como as substâncias húmicas, os iões cobre e a luz solar podem afetar a sua degradação. Os estudos de adsorção-desadsorção do tirame nos solos revelaram que a matéria orgânica do solo e o conteúdo de cobre afetavam os processos de adsorção-desadsorção do tirame, influenciando a sua lixiviação e persistência no solo. De facto, verificou-se que o teor de cobre do solo tinha um efeito bastante marcante no processo de adsorçãodesadsorção do tirame. Verificou-se a ocorrência de reações entre o tirame e os iões cobre, cuja extensão durante os estudos de adsorção pode ser fortemente dependente do teor de cobre do solo e da concentração inicial de tirame em solução. Assim, a escolha do tempo de equilíbrio em estudos de adsorção e a determinação das isotérmicas de adsorção ao solo torna-se uma tarefa difícil. Além disso, os complexos formados com o cobre existente no solo são persistentes, não sendo facilmente lixiviados para as águas subterrâneas. Conclui-se que os iões cobre(II) podem contribuir para a imobilização do tirame no solo e o aumento da persistência dos seus resíduos ligados ao cobre. A partir de estudos de recuperação do tirame em águas naturais verificou-se a ocorrência de uma rápida degradação do tirame, devido provavelmente aos iões metálicos, nomeadamente, iões cobre. Verificou-se que dependendo da razão tirame:Cu podiam ocorrer dois processos: (i) complexação entre o tirame e o cobre, quando não há excesso de iões cobre, sendo o complexo formado mais persistente que o tirame; (ii) ou, quando há um grande excesso de iões cobre, a degradação do tirame e a estabilização dos produtos de degradação por complexação, podendo formar-se complexos que permanecem sem alteração em solução durante pelo menos dois meses. No geral, foi possível, pela primeira vez, identificar alguns dos complexos de cobre formados ao longo do tempo. Por fim, estudou-se a cinética de fotodegradação do tirame em solução aquosa sob a ação da luz solar e identificaram-se, pela primeira vez, três fotoprodutos. Verificou-se um aumento da velocidade de fotodegradação do tirame na presença de substâncias húmicas. Assim, podemos concluir que a matéria orgânica, os iões cobre(II) e a luz solar têm um efeito importante no comportamento do tirame no meio ambiente. Contudo, os iões cobre têm um efeito mais marcante na degradação e persistência dos produtos que são formados.

Representational modes of thinking employed by children aged thirteen and fourteen, and their relationship to performance in standardised tests of ability, measures of creativity and personality

This thesis proposes that despite many experimental studies of thinking, and the development of models of thinking, such as Bruner's (1966) enactive, iconic and symbolic developmental modes, the imagery and inner verbal strategies used by children need further investigation to establish a coherent, theoretical basis from which to create experimental curricula for direct improvement of those strategies. Five hundred and twenty-three first, second and third year comprehensive school children were tested on 'recall' imagery, using a modified Betts Imagery Test; and a test of dual-coding processes (Paivio, 1971, p.179), by the P/W Visual/Verbal Questionnaire, measuring 'applied imagery' and inner verbalising. Three lines of investigation were pursued: 1. An investigation a. of hypothetical representational strategy differences between boys and girls; and b. the extent to which strategies change with increasing age. 2. The second and third year children's use of representational processes, were taken separately and compared with performance measures of perception, field independence, creativity, self-sufficiency and self-concept. 3. The second and third year children were categorised into four dual-coding strategy groups: a. High Visual/High Verbal b. Low Visual/High Verbal c. High Visual/Low Verbal d. Low Visual/Low Verbal These groups were compared on the same performance measures. The main result indicates that: 1. A hierarchy of dual-coding strategy use can be identified that is significantly related (.01, Binomial Test) to success or failure in the performance measures: the High Visual/High Verbal group registering the highest scores, the Low Visual/High Verbal and High Visual/Low Verbal groups registering intermediate scores, and the Low Visual/Low Verbal group registering the lowest scores on the performance measures. Subsidiary results indicate that: 2. Boys' use of visual strategies declines, and of verbal strategies increases, with age; girls' recall imagery strategy increases with age. Educational implications from the main result are discussed, the establishment of experimental curricula proposed, and further research suggested.

Applications for nanomaterials in critical technologies

This thesis is devoted to the development, synthesis, properties, and applications of nano materials for critical technologies, including three areas: (1) Microbial contamination of drinking water is a serious problem of global significance. About 51% of the waterborne disease outbreaks in the United States can be attributed to contaminated ground water. Development of metal oxide nanoparticles, as viricidal materials is of technological and fundamental scientific importance. Nanoparticles with high surface areas and ultra small particle sizes have dramatically enhanced efficiency and capacity of virus inactivation, which cannot be achieved by their bulk counterparts. A series of metal oxide nanoparticles, such as iron oxide nanoparticles, zinc oxide nanoparticles and iron oxide-silver nanoparticles, coated on fiber substrates was developed in this research for evaluation of their viricidal activity. We also carried out XRD, TEM, SEM, XPS, surface area measurements, and zeta potential of these nanoparticles. MS2 virus inactivation experiments showed that these metal oxide nanoparticle coated fibers were extremely powerful viricidal materials. Results from this research suggest that zinc oxide nanoparticles with diameter of 3.5 nm, showing an isoelectric point (IEP) at 9.0, were well dispersed on fiberglass. These fibers offer an increase in capacity by orders of magnitude over all other materials. Compared to iron oxide nanoparticles, zinc oxide nanoparticles didn’t show an improvement in inactivation kinetics but inactivation capacities did increase by two orders of magnitude to 99.99%. Furthermore, zinc oxide nanoparticles have higher affinity to viruses than the iron oxide nanoparticles in presence of competing ions. The advantages of zinc oxide depend on high surface charge density, small nanoparticle sizes and capabilities of generating reactive oxygen species. The research at its present stage of development appears to offer the best avenue to remove viruses from water. Without additional chemicals and energy input, this system can be implemented by both points of use (POU) and large-scale use water treatment technology, which will have a significant impact on the water purification industry. (2) A new family of aliphatic polyester lubricants has been developed for use in micro-electromechanical systems (MEMS), specifically for hard disk drives that operate at high spindle speeds (>15000rpm). Our program was initiated to address current problems with spin-off of the perfluoroether (PFPE) lubricants. The new polyester lubricant appears to alleviate spin-off problems and at the same time improves the chemical and thermal stability. This new system provides a low cost alternative to PFPE along with improved adhesion to the substrates. In addition, it displays a much lower viscosity, which may be of importance to stiction related problems. The synthetic route is readily scalable in case additional interest emerges in other areas including small motors. (3) The demand for increased signal transmission speed and device density for the next generation of multilevel integrated circuits has placed stringent demands on materials performance. Currently, integration of the ultra low-k materials in dual Damascene processing requires chemical mechanical polishing (CMP) to planarize the copper. Unfortunately, none of the commercially proposed dielectric candidates display the desired mechanical and thermal properties for successful CMP. A new polydiacetylene thermosetting polymer (DEB-TEB), which displays a low dielectric constant (low-k) of 2.7, was recently developed. This novel material appears to offer the only avenue for designing an ultra low k dielectric (1.85k), which can still display the desired modulus (7.7Gpa) and hardness (2.0Gpa) sufficient to withstand the process of CMP. We focused on further characterization of the thermal properties of spin-on poly (DEB-TEB) ultra-thin film. These include the coefficient of thermal expansion (CTE), biaxial thermal stress, and thermal conductivity. Thus the CTE is 2.0*10-5K-1 in the perpendicular direction and 8.0*10-6 K-1 in the planar direction. The low CTE provides a better match to the Si substrate which minimizes interfacial stress and greatly enhances the reliability of the microprocessors. Initial experiments with oxygen plasma etching suggest a high probability of success for achieving vertical profiles.

A comprehensive dual-scale wood torrefaction model : application to the analysis of thermal run-away in industrial heat treatment processes

A dual-scale model of the torrefaction of wood was developed and used to study industrial configurations. At the local scale, the computational code solves the coupled heat and mass transfer and the thermal degradation mechanisms of the wood components. At the global scale, the two-way coupling between the boards and the stack channels is treated as an integral component of the process. This model is used to investigate the effect of the stack configuration on the heat treatment of the boards. The simulations highlight that the exothermic reactions occurring in each single board can be accumulated along the stack. This phenomenon may result in a dramatic eterogeneity of the process and poses a serious risk of thermal runaway, which is often observed in industrial plants. The model is used to explain how thermal runaway can be lowered by increasing the airflow velocity, the sticker thickness or by gas flow reversal.

Electronic and kinetic processes in the Cu/CuCl double pulse laser

Kinetic and electronic processes in a Cu/CuCl double pulsed laser were investigated by measuring discharge and laser pulse characteristics, and by computer modeling. There are two time scales inherent to the operation of the Cu/CuCl laser. The first is during the interpulse afterglow (tens to hundreds of microseconds). The second is during the pumping pulse (tens of nanoseconds). It was found that the character of the pumping pulse is largely determined by the initial conditions provided by the interpulse afterglow. By tailoring the dissociation pulse to be long and low energy, and by conditioning the afterglow, one may select the desired initial conditions and thereby significantly improve laser performance. With a low energy dissociation pulse, the fraction of metastable copper obtained from a CuCl dissociation is low. By maintaining the afterglow, contributions to the metastable state from ion recombinations are prevented, and the plasma impedance remains low thereby increasing the rate of current rise during the pumping pulse. Computer models for the dissociation pulse, afterglow, pumping pulse and laser pulse reproduced experimentally observed behavior of laser pulse energy and power as a function of time delay, pumping pulse characteristics, and buffer gas pressure. The sensitivity of laser pulse properties on collisional processes (e.g., CuCl reassociation rates) was investigated.

Dual-processes in learning and judgment:Evidence from the multiple cue probability learning paradigm

Multiple cue probability learning (MCPL) involves learning to predict a criterion based on a set of novel cues when feedback is provided in response to each judgment made. But to what extent does MCPL require controlled attention and explicit hypothesis testing? The results of two experiments show that this depends on cue polarity. Learning about cues that predict positively is aided by automatic cognitive processes, whereas learning about cues that predict negatively is especially demanding on controlled attention and hypothesis testing processes. In the studies reported here, negative, but not positive cue learning related to individual differences in working memory capacity both on measures of overall judgment performance and modelling of the implicit learning process. However, the introduction of a novel method to monitor participants' explicit beliefs about a set of cues on a trial-by-trial basis revealed that participants were engaged in explicit hypothesis testing about positive and negative cues, and explicit beliefs about both types of cues were linked to working memory capacity. Taken together, our results indicate that while people are engaged in explicit hypothesis testing during cue learning, explicit beliefs are applied to judgment only when cues are negative. © 2012 Elsevier Inc.

Precipitation processes in Al-Cu-Mg-Sn and Al-Cu-Mg-Sn-Ag

Microalloying trace elements into aluminum alloys have been shown to improve mechanical properties by altering the precipitation process. Here, trace amounts of Sn and (Sn + Ag) have been added to Al-1.1Cu-1.7Mg (at.%) and the effects have been investigated by a combination of hardness testing and transmission electron microscopy (TEM). Hardness testing shows that the addition of Sn increases the hardness throughout the ageing process, and in combination with Ag, further increases the hardness and shortens the time to reach the peak hardness. The increase in hardness via Sn microalloying is attributed to the homogeneous distribution of S phase (Al2CuMg) precipitates. In the alloy microalloyed with both Sn and Ag, the microstructure is dominated by homogeneously distributed Ω phase (Al2Cu) precipitates in the peak strengthened condition. Given that neither spherical β-Sn precipitates, nor any other obvious nucleation sites for the Ω phase precipitates were observed using TEM, the mechanism for development of such homogeneous precipitation remains to be determined.

Copper and zinc stable isotope ratios as tracers of biogeochemical processes, sources and transport of Cu and Zn in soils

Copper and Zn are essential micronutrients for plants, animals, and humans; however, they may also be pollutants if they occur at high concentrations in soil. Therefore, knowledge of Cu and Zn cycling in soils is required both for guaranteeing proper nutrition and to control possible risks arising from pollution.rnThe overall objective of my study was to test if Cu and Zn stable isotope ratios can be used to investigate into the biogeochemistry, source and transport of these metals in soils. The use of stable isotope ratios might be especially suitable to trace long-term processes occurring during soil genesis and transport of pollutants through the soil. In detail, I aimed to answer the questions, whether (1) Cu stable isotopes are fractionated during complexation with humic acid, (2) 65Cu values can be a tracer for soil genetic processes in redoximorphic soils (3) 65Cu values can help to understand soil genetic processes under oxic weathering conditions, and (4) 65Cu and 66Zn values can act as tracers of sources and transport of Cu and Zn in polluted soils.rnTo answer these questions, I ran adsorption experiments at different pH values in the laboratory and modelled Cu adsorption to humic acid. Furthermore, eight soils were sampled representing different redox and weathering regimes of which two were influenced by stagnic water, two by groundwater, two by oxic weathering (Cambisols), and two by podzolation. In all horizons of these soils, I determined selected basic soil properties, partitioned Cu into seven operationally defined fractions and determined Cu concentrations and Cu isotope ratios (65Cu values). Finally, three additional soils were sampled along a deposition gradient at different distances to a Cu smelter in Slovakia and analyzed together with bedrock and waste material from the smelter for selected basic soil properties, Cu and Zn concentrations and 65Cu and 66Zn values.rnMy results demonstrated that (1) Copper was fractionated during adsorption on humic acid resulting in an isotope fractionation between the immobilized humic acid and the solution (65CuIHA-solution) of 0.26 ± 0.11‰ (2SD) and that the extent of fractionation was independent of pH and involved functional groups of the humic acid. (2) Soil genesis and plant cycling causes measurable Cu isotope fractionation in hydromorphic soils. The results suggested that an increasing number of redox cycles depleted 63Cu with increasing depth resulting in heavier 65Cu values. (3) Organic horizons usually had isotopically lighter Cu than mineral soils presumably because of the preferred uptake and recycling of 63Cu by plants. (4) In a strongly developed Podzol, eluviation zones had lighter and illuviation zones heavier 65Cu values because of the higher stability of organo-65Cu complexes compared to organo-63Cu complexes. In the Cambisols and a little developed Podzol, oxic weathering caused increasingly lighter 65Cu values with increasing depth, resulting in the opposite depth trend as in redoximorphic soils, because of the preferential vertical transport of 63Cu. (5) The 66Zn values were fractionated during the smelting process and isotopically light Zn was emitted allowing source identification of Zn pollution while 65Cu values were unaffected by the smelting and Cu emissions isotopically indistinguishable from soil. The 65Cu values in polluted soils became lighter down to a depth of 0.4 m indicating isotope fractionation during transport and a transport depth of 0.4 m in 60 years. 66Zn values had an opposite depth trend becoming heavier with depth because of fractionation by plant cycling, speciation changes, and mixing of native and smelter-derived Zn. rnCopper showed measurable isotope fractionation of approximately 1‰ in unpolluted soils, allowing to draw conclusions on plant cycling, transport, and redox processes occurring during soil genesis and 65Cu and 66Zn values in contaminated soils allow for conclusions on sources (in my study only possible for Zn), biogeochemical behavior, and depth of dislocation of Cu and Zn pollution in soil. I conclude that stable Cu and Zn isotope ratios are a suitable novel tool to trace long-term processes in soils which are difficult to assess otherwise.rn

Quasi-Self-Dual Exponential Lévy Processes

The important application of semistatic hedging in financial markets naturally leads to the notion of quasi--self-dual processes. The focus of our study is to give new characterizations of quasi--self-duality. We analyze quasi--self-dual Lévy driven markets which do not admit arbitrage opportunities and derive a set of equivalent conditions for the stochastic logarithm of quasi--self-dual martingale models. Since for nonvanishing order parameter two martingale properties have to be satisfied simultaneously, there is a nontrivial relation between the order and shift parameter representing carrying costs in financial applications. This leads to an equation containing an integral term which has to be inverted in applications. We first discuss several important properties of this equation and, for some well-known Lévy-driven models, we derive a family of closed-form inversion formulae.