937 resultados para Best Possible Medication History (BPMH)


Relevância:

100.00% 100.00%

Publicador:

Resumo:

To investigate whether alterations in RNA editing (an enzymatic base-specific change to the RNA sequence during primary transcript formation from DNA) of neurotransmitter receptor genes and of transmembrane ion channel genes play a role in human temporal lobe epilepsy (TLE), this exploratory study analyzed 14 known cerebral editing sites in RNA extracted from the brain tissue of 41 patients who underwent surgery for mesial TLE, 23 with hippocampal sclerosis (MTLE+HS). Because intraoperatively sampled RNA cannot be obtained from healthy controls and the best feasible control is identically sampled RNA from patients with a clinically shorter history of epilepsy, the primary aim of the study was to assess the correlation between epilepsy duration and RNA editing in the homogenous group of MTLE+HS. At the functionally relevant I/V site of the voltage-gated potassium channel Kv1.1, an inverse correlation of RNA editing was found with epilepsy duration (r=-0.52, p=0.01) but not with patient age at surgery, suggesting a specific association with either the epileptic process itself or its antiepileptic medication history. No significant correlations were found between RNA editing and clinical parameters at other sites within glutamate receptor or serotonin 2C receptor gene transcripts. An "all-or-none" (≥95% or ≤5%) editing pattern at most or all sites was discovered in 2 patients. As a secondary part of the study, RNA editing was also analyzed as in the previous literature where up to now, few single editing sites were compared with differently obtained RNA from inhomogenous patient groups and autopsies, and by measuring editing changes in our mouse model. The present screening study is first to identify an editing site correlating with a clinical parameter, and to also provide an estimate of the possible effect size at other sites, which is a prerequisite for power analysis needed in planning future studies.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Lääkehoidon turvallinen toteuttaminen edellyttää sairaanhoitajalta hyvää lääkehoidon osaamisperustaa. Sairaanhoitajakoulutuksen tehtävänä on mahdollistaa tämän osaamisen kehittyminen. Kansainvälisissä tutkimuksissa on kuitenkin osoitettu, että lääkehoidon opetuksen laajuudessa, sisällössä ja toteutuksessa on vaihtelevuutta. Aikaisemmissa tutkimuksissa on raportoitu myös puutteita lääkehoidon osaamisessa sekä sairaanhoitajilla että sairaanhoitajaopiskelijoilla. Koulutuksen ja lääkehoidon osaamisen kehittämiseksi lääkehoidon opetuksen ja sairaanhoitajaopiskelijoiden lääkehoidon osaamisen monipuolinen arviointi ja osaamista selittävien tekijöiden tarkastelu on tarpeen. Tämän tutkimuksen tarkoituksena oli i) arvioida lääkehoidon opetusta suomalaisessa sairaanhoitajakoulutuksessa, ii) arvioida sairaanhoitajaopiskelijoiden lääkehoidon osaamista sekä iii) tunnistaa sairaanhoitajaopiskelijan lääkehoidon osaamiseen yhteydessä olevat tekijät. Tutkimus toteutettiin kolmessa vaiheessa. Ensimmäisessä vaiheessa kahden integroidun kirjallisuuskatsauksen kautta määriteltiin tutkimuksen kohteena oleva sairaanhoitajan lääkehoidon osaaminen ja aiemmin tunnistetut sairaanhoitajaopiskelijan lääkehoidon osaamiseen yhteydessä olevat tekijät. Toisessa vaiheessa toteutettiin valtakunnallinen lääkehoidon opetukseen liittyvä kysely hoitotyön koulutusohjelmasta vastaaville koulutuspäälliköille (n=22) ja opettajille (n=136). Tutkimuksen kolmannessa vaiheessa opintojensa alku‐ (n=328) ja loppuvaiheessa olevien sairaanhoitajaopiskelijoiden (n=338) lääkehoidon osaaminen arvioitiin ja osaamiseen yhteydessä olevat tekijät tunnistettiin. Aineistojen analyysissä käytettiin pääosin tilastollisia menetelmiä. Tulosten perusteella lääkehoidon opetuksen laajuus vaihteli eri ammattikorkeakouluissa, mutta opetuksen sisältö oli kuitenkin monipuolista. Lisää huomiota tulisi kiinnittää lääkehoidon teoreettiseen perustaan ja itsehoitoon sekä lääkehoidon ohjaukseen liittyviin sisältöalueisiin. Opiskelijoiden lääkehoidon osaamista arvioitiin säännöllisesti kaikissa ammattikorkeakouluissa. Sairaanhoitajaopiskelijan lääkehoidon osaamista arvioitiin tutkimuksessa tietotestillä, lääkelaskentatehtävillä ja lyhyiden potilastapausten ratkaisemisen avulla. Lääkehoidon osaamiseen yhteydessä olevia tekijöitä tarkasteltiin kolmesta näkökulmasta: 1) yksilölliset tekijät, 2) kliiniseen oppimisympäristöön ja 3) ammattikorkeakouluun liittyvät tekijät. Lääkehoidon teoreettista osaamista arvioivassa tietotestissä opiskelijat vastasivat keskimäärin 72 prosenttiin kysymyksistä täysin oikein; lääkelaskuista täysin oikein oli 74 % ja potilastapauksissa 57 % valitsi parhaan mahdollisen toimintatavan. Tulosten perusteella sairaanhoitajaopiskelijan osaamista selittivät eniten yksilölliset tekijät. Lääkehoidon osaamiseen yhteydessä olevien tekijöiden välillä oli eroa opintojen alussa ja lopussa. Opintojen alkuvaiheessa opiskelijan aikaisempi opintomenestys oli yhteydessä lääkehoidon osaamiseen, kun taas opintojen loppuvaiheessa siihen olivat yhteydessä opiskelijan kyky itseohjautuvaan oppimiseen sekä opiskelumotivaatio. Johtopäätöksenä voidaan todeta tutkimuksen tulosten olevan samansuuntaisia kuin aikaisemmissa tutkimuksissa. Lääkehoidon opetuksen laajuus vaihtelee opetussuunnitelmatasolla, mutta täsmällinen arviointi on vaikeaa opetuksen sisältöjen integroimisen takia. Sairaanhoitajaopiskelijoiden lääkehoidon osaaminen oli hieman parempaa kuin aikaisemmissa tutkimuksissa, mutta osaamisessa on edelleen puutteita. Lääkehoidon opetuksen ja osaamisen kehittäminen edellyttää kansallista ja kansainvälistä tutkimus‐ ja kehittämisyhteistyötä. Tutkimuksen tulokset tukevat lääkehoidon opetuksen sekä osaamisen tutkimusta ja kehittämistä.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Introduction / Aims: Adopting the important decisions represents a specific task of the manager. An efficient manager takes these decisions during a sistematic process with well-defined elements, each with a precise order. In the pharmaceutical practice and business, in the supply process of the pharmacies, there are situations when the medicine distributors offer a certain discount, but require payment in a shorter period of time. In these cases, the analysis of the offer can be made with the help of the decision tree method, which permits identifying the decision offering the best possible result in a given situation. The aims of the research have been the analysis of the product offers of many different suppliers and the establishing of the most advantageous ways of pharmacy supplying. Material / Methods: There have been studied the general product offers of the following medical stores: A&G Med, Farmanord, Farmexim, Mediplus, Montero and Relad. In the case of medicine offers including a discount, the decision tree method has been applied in order to select the most advantageous offers. The Decision Tree is a management method used in taking the right decisions and it is generally used when one needs to evaluate the decisions that involve a series of stages. The tree diagram is used in order to look for the most efficient means to attain a specific goal. The decision trees are the most probabilistic methods, useful when adopting risk taking decisions. Results: The results of the analysis on the tree diagrams have indicated the fact that purchasing medicines with discount (1%, 10%, 15%) and payment in a shorter time interval (120 days) is more profitable than purchasing without a discount and payment in a longer time interval (160 days). Discussion / Conclusion: Depending on the results of the tree diagram analysis, the pharmacies would purchase from the selected suppliers. The research has shown that the decision tree method represents a valuable work instrument in choosing the best ways for supplying pharmacies and it is very useful to the specialists from the pharmaceutical field, pharmaceutical management, to medicine suppliers, pharmacy practitioners from the community pharmacies and especially to pharmacy managers, chief – pharmacists.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica Ramo Manutenção e Produção

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The Public Health Agency is using National Breastfeeding Awareness Week (NBAW) to emphasise the message that breastfeeding is the healthiest option for both you and your baby and that by deciding to breastfeed, you will be giving your child the best possible start in life. NBAW runs from 19-25 June and highlights the fact that any period of breastfeeding, however short, will benefit your baby.Breast milk is different to formula milk as it contains antibodies that cannot be manufactured in formula. Antibodies help protect babies from infection and stimulate their immune system.Northern Ireland has the lowest breastfeeding rate in the UK, with an average of 63% of women breastfeeding their baby at birth. Janet Calvert, Regional Breastfeeding Coordinator at the PHA, said: "This is an issue that clearly needs addressed, as breastfeeding has many important health benefits for both mother and baby. These include a reduced risk of ear, chest, kidney and stomach infections and less risk of childhood diabetes and obesity."Breastfeeding can also significantly reduce the risk of hospital admission of children for gastroenteritis and chest infections. The health benefits for mothers who choose to breastfeed include a reduced risk of developing illnesses such as breast cancer, ovarian cancer and osteoporosis."There are other benefits as well as those to your health. Breastfeeding is free - you don't have to buy formula, bottles, teats, sterilising equipment etc. Breast milk is always available, with the right ingredients, at the right temperature, so it's easier to feed at night or on the go.The PHA recognises the importance of breastfeeding to health and the need to ensure that mothers get off to a good start with breastfeeding. It is vital that mothers get the right support and encouragement from their family and friends should they decide to breastfeed. Breastfeeding can be difficult at the start and mothers need reassurance while they learn."There are many local initiatives in the community to improve breastfeeding support. These include improving support in the health service and through Sure Start programmes, which work in areas of need to help ensure children get the best start in life," Janet added."Mother to mother peer support programmes are in place in many areas and are working with expectant and new mothers to help them breastfeed for longer. There are also 70 breastfeeding support groups, which provide ongoing support for breastfeeding mothers throughout Northern Ireland. "The PHA is also working to improve attitudes to breastfeeding in public through the Breastfeeding Welcome Here scheme, which began in 2005 and now has over 200 businesses and public facilities signed up to support and welcome breastfeeding families. All these initiatives, along with support from partners and family, are vital to help expectant and new mothers stay with breastfeeding."Health Minister Edwin Poots said: "There is clear evidence that breastfeeding offers health benefits for both babies and mothers. We know that breast milk gives baby the best start in life by providing all the nutrients and protection a baby needs for the first six months of life. That is why my Department is committed to promoting and supporting breastfeeding".For further information on breastfeeding visit www.breastfedbabies.org.uk

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The purpose of this thesis was to define how product carbon footprint analysis and its results can be used in company's internal development as well as in customer and interest group guidance, and how these factors are related to corporate social responsibility. From-cradle-to-gate carbon footprint was calculated for three products; Torino Whole grain barley, Torino Pearl barley, and Elovena Barley grit & oat bran, all of them made of Finnish barley. The carbon footprint of the Elovena product was used to determine carbon footprints for industrial kitchen cooked porridge portions. The basic calculation data was collected from several sources. Most of the data originated from Raisio Group's contractual farmers and Raisio Group's cultivation, processing and packaging specialists. Data from national and European literature and database sources was also used. The electricity consumption for porridge portions' carbon footprint calculations was determined with practical measurements. The carbon footprint calculations were conducted according to the ISO 14044 standard, and the PAS 2050 guide was also applied. A consequential functional unit was applied in porridge portions' carbon footprint calculations. Most of the emissions from barley products' life cycle originate from primary production. The nitrous oxide emissions from cultivated soil and the use and production of nitrogenous fertilisers contribute over 50% of products' carbon footprint. Torino Pearl barley has the highest carbon footprint due to the lowest processing output. The reductions in products' carbon footprint can be achieved with developments in cultivation and grain processing. The carbon footprint of porridge portion can be reduced by using domestically produced plant-based ingredients and by making the best possible use of the kettle. Carbon footprint calculation can be used to determine possible improvement points related to corporate environmental responsibility. Several improvement actions are related to economical and social responsibility through better raw material utilization and expense reductions.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Kuppikartongin yksi tärkeimmistä ominaisuuksista on reunaimeytymän vastustuskyky, joka tulee olla riittävällä tasolla laadun takaamiseksi. Koska yksinkertainen juomakuppi on bulkki¬tuote, ei sen raakareunaa kannata taloudellisuuden vuoksi suojata tätä varten kehitellyillä menetelmillä vaan itse kartongin tulee vastustaa nesteitä riittävässä määrin. Tämän diplomityön tarkoituksena oli selvittää hydrofobointiin käytettävän massaliiman (hartsi) sekä pintaliiman joukkoon annosteltavan lisäaineen välinen optimaalinen suhde parhaan vastustuskyvyn saavuttamiseksi. Lisäksi selvitettiin joidenkin liimapuristimen ajo-olosuhteiden vaikutusta pintaliiman pick-upiin sekä koneen pH-tason oikeellisuus. Jauhatuksen vaikutusta tutkittiin lähinnä historiatietojen avulla. Tutkimus koostui viidestä tehdasmittakaavaisesta koeajosta, joiden avulla selvitettiin muuttujien vaikutus sisäisellä reunaimeytymän määritysmenetelmällä sekä määrittä¬mällä koepisteistä kulloinkin mielenkiinnon kohteena olleet kemikaalipitoisuudet. Viimeisen koeajon koepisteet jalostettiin lisäksi valmiiksi kupeiksi. Käytetty reunaimeytymän määritysmenetelmä osoittautui virhealttiiksi eivätkä raakakartongista tehtyjen määritysten tulokset korreloineet kovinkaan voimakkaasti PE-päällystettyjen näytteiden kanssa. Menetelmän kehitystä on viety eteenpäin tämän työn rinnalla ja työ jatkuu edelleen. Lisäksi kartongin hartsipitoisuusmääritysten tuloksista paljastui ristiriitaisuuksia, joiden vuoksi menetelmää uusittiin voimakkaasti. Reunaimeytymän vastustuksen riittävyydeksi koneella käytettävien massaliima-annosten tulee olla vähintään valitulla nollatasolla kaikissa kerroksissa ja pintaliiman lisäaine tulee pitää käytössä. Mikäli lisäaine jätetään pois käytöstä, tulee massaliima-annokset olla hyvin korkeita, eikä tämäkään takaa täysin reunaimeytymätöntä lopputuotetta. Lisäaineen ollessa käytössä ei suuremmalla massaliima-annoksella ole puolestaan merkittävää vaikutusta. Konetta ajetaan nykyisin hyvin alhaisella pH-tasolla, mutta tason nostaminen aiheuttaa selvän liimauksen heikkenemisen. Liimapuristimelle tulevan radan kosteudella ja pintaliiman kuiva-aineella ei näyttäisi olevan vaikutusta kartongin reunaimeytymän vastustuskykyyn. Myöskään taustakerroksen koivun jauhatusasteella ei ole merkitystä alueella, jolla koneella operoidaan. CTMP-massan jauhatuksen tulee sen sijaan olla riittävä, jotta keskikerrokseen ei synny yksittäisiä, pitkiä imeytymiä.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Internationally, Finland has been among the most respected countries during several decades in terms of public health. WHO has had the most significant influence on Finnish health policy and the relationship has traditionally been warm. However, the situation has slightly changed in the last 10-20 years. The objectives of Finnish national health policy have been to secure the best possible health for the population and to minimize disparities in health between different population groups. Nevertheless, although the state of public health and welfare has steadily improved, the socioeconomic disparities in health have increased. This qualitative case study will demonstrate why health is political and why health matters. It will also present some recommendations for research topics and administrative reforms. It will be argued that lack of political interest in health policy leads to absence of health policy visions and political commitment, which can be disastrous for public health. This study will investigate how Finnish health policy is defined and organised, and it will also shed light on Finnish health policy formation processes and actors. Health policy is understood as a broader societal construct covering the domains of different ministries, not just Ministry of Social Affairs and Health (MSAH). The influences of economic recession of the 1990s, state subsidy reform in 1993, globalisation and the European Union will be addressed, as well. There is not much earlier Finnish research done on health policy from political science viewpoint. Therefore, this study is interdisciplinary and combines political science with administrative science, contemporary history and health policy research with a hint of epidemiology. As a method, literature review, semi-structured interviews and policy analysi will be utilised. Institutionalism, policy transfer, and corporatism are understood as the theoretical framework. According to the study, there are two health policies in Finland: the official health policy and health policy generated by industry, media and various interest organisations. The complex relationships between the Government and municipalities, and on the other hand, the MSAH and National Institute for Health and Welfare (THL) seemed significant in terms of Finnish health policy coordination. The study also showed that the Investigated case, Health 2015, does not fulfil all necessary criteria for a successful public health programme. There were also several features both in Health 2015 and Finnish health policy, which can be interpreted in NPM framework and seen having NPM influences.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Les données sur l'utilisation des médicaments sont généralement recueillies dans la recherche clinique. Pourtant, aucune méthode normalisée pour les catégoriser n’existe, que ce soit pour la description des échantillons ou pour l'étude de l'utilisation des médicaments comme une variable. Cette étude a été conçue pour développer un système de classification simple, sur une base empirique, pour la catégorisation d'utilisation des médicaments. Nous avons utilisé l'analyse factorielle pour réduire le nombre de groupements de médicaments possible. Cette analyse a fait émerger un modèle de constellations de consommation de médicaments qui semble caractériser des groupes cliniques spécifiques. Pour illustrer le potentiel de la technique, nous avons appliqué ce système de classification des échantillons où les troubles du sommeil sont importants: syndrome de fatigue chronique et l'apnée du sommeil. Notre méthode de classification a généré 5 facteurs qui semblent adhérer de façon logique. Ils ont été nommés: Médicaments cardiovasculaire/syndrome métabolique, Médicaments pour le soulagement des symptômes, Médicaments psychotropes, Médicaments préventifs et Médicaments hormonaux. Nos résultats démontrent que le profil des médicaments varie selon l'échantillon clinique. Le profil de médicament associé aux participants apnéiques reflète les conditions de comorbidité connues parmi ce groupe clinique, et le profil de médicament associé au Syndrome de fatigue chronique semble refléter la perception commune de cette condition comme étant un trouble psychogène

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fortement liées à l’international, les industries françaises du textile ont connu une évolution erratique entre 1871 et 1914. L’adoption de tarifs hautement protectionnistes en 1892 favorise les industriels du coton au détriment de ceux travaillant la laine et la soie. Ces derniers exportent leurs marchandises luxueuses sur des marchés ouverts à la concurrence. Ils profitent peu des marchés coloniaux, moins intéressés par leurs produits. Des politiques hardies d’importation directe de la matière première permettent, notamment à Roubaix, de pallier à certains désavantages. Si plusieurs industriels incitent le gouvernement à réformer ses services commerciaux à l’étranger et à y adjoindre des spécialistes, ils retiennent peu les recommandations des experts concernant l’adoption des moyens propres à favoriser les exportations. Plusieurs carences du commerce français ont été soulignées précocement mais il a été difficile de rapidement appliquer des solutions. Dans un contexte marqué par une concurrence accrue sur les marchés extérieurs, la France s’en tire mieux qu’on a pu le penser. La flexibilité de l’appareil productif français permet d’obtenir de nombreuses commandes dans les créneaux du luxe et du demi-luxe. Son niveau d’intégration, moins élevé que dans d’autres pays, se révèle ainsi parfois être un avantage. Toutefois, l’industrie textile est handicapée par la grande difficulté des patrons à s’associer de manière stable à l’extérieur du clan familial. L’entente se réalise cependant plus aisément et avantageusement pour ceux qui ont une production spécialisée, rare ou brevetée. Les performances et l’organisation des entreprises textiles françaises à l’étranger montrent que le marché national stimulait peu les producteurs à adopter les meilleures conditions de production possibles. Ces sociétés et celles obtenant des succès à l’exportation sont souvent les plus dynamiques et les plus rentables.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Contemporary food production, given the degree of technology being applied in it and the present state of scientific knowledge, should be able to feed the world. Corresponding statistics show that in fact the volumes of modern food production confirm this statement. Yet, the present nutritional situation across the globe leaves much to be desired: on the one hand the numbers of undernourished and malnourished people are still high and even growing in some regions, and on the other hand there is an increasing number of overweight and obese people who are experiencing (or are at risk of) adverse health impacts as consequences. The question arises how this situation is possible given the present state of food production and knowledge, and also in terms of nutrition basics when talking about the latter. When arguing about the main causes of the present situation with nutrition across the globe, it is the modern food system with its distortions that is often criticised with emphasis placed on inappropriate food distribution as one of the key problems. However it is not only food distribution that shapes inequalities in terms of food availability and accessibility – there is a number of other factors contributing to this situation including political influences. Each of the drivers of the present situation might affect more than one part and have outcomes in different dimensions. Therefore it makes sense to apply a holistic approach when viewing the modern food system, embracing all the elements and existing relationships between them for this will facilitate taking appropriate actions in order to target the desired outcome in the best possible way. Applying a systematic approach and linking various elements with corresponding interactions among them allows for picturing all the possible outcomes and hence finding the way for a better solution on global level – a solution to the present problem with nutritional disbalance across the globe.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Enfermagem (mestrado profissional) - FMB

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work intends to know the most types of ignition systems, studying its history, the way it works, applications and some examples. The assembly of a distributor less ignition system is also required. All vehicles powered by internal combustion engines need an ignition system that allows this engine to ignite the air-fuel mixture using its ignition system in the best possible manner. The main goal of an ignition system is to obtain a spark having enough energy to start the chemical reaction of the oxygen and the fuel. It took a study dealing with the various types of ignition systems since their creation at the beginning of the last century until 2015. The work starts studying the high tension magneto ignition system and later together with the low tension ignition system, going on with the conventional ignition system and finally accomplishing with the various types of electronic ignition systems. It was studied and implemented an electronic circuit to power a double spark ignition system also known as wasted spark ignition system. This circuit was assembled with an electric pulse generator and powered mechanically by a dc electric motor of the variable rpm type