Induction reheating of A356.2 aluminum alloy and thixocasting as automobile component

The development work for producing an automobile component by thixocasting using A356.2 alloy was introduced. As the first step, the alloy was electromagnetically stirred and solidified to produce a billet with non-dendritic microstructure. The microstructure depended on several process parameters such as stirring intensity, stirring frequency, cooling rate, and melt initial superheat. Through a series of computational studies and controlled experiments, a set of process parameters were identified to produce the best microstructures. Reheating of a billet with non-dendritic microstructure to a semisolid temperature was the next step for thixo-casting of the components. The reheating process was characterized for various reheating cycles using a vertical-type reheating machine. The induction heating cycle was optimized to obtain a near-uniform temperature distribution in radial as well as axial direction of the billet, and the heating was continued until the liquid fraction reached about 50%. These parameters were determined with the help of a computational fluid dynamics (CFD) model of die filling and solidification of the semisolid alloy. The heated billets were subsequently thixo-cast into automobile components using a real-time controlled die casting machine. The results show that the castings are near net shape, free from porosity, good surface finish and have superior mechanical properties compared to those produced by conventional die casting processes using the same alloy.

Technologische Reife von generativen Herstellungsverfahren für Endanwendungen im Automobilbau

Technische Produktionssysteme und Prozesse - welcher Technologie auch immer - müssen den Bedürfnissen der industriellen Bauteilherstellung für Endanwendungen im Automobilbau entsprechen. Es stellt sich zunächst die Frage, auf welchem technologischen Reifegrad sich die generativen Technologien für den Automobilbau derzeit befinden? Welche außerordentlichen Vorteile können generative Prozessketten gegenüber konventionellen Herstellungsverfahren bieten und welche Hürden müssen genommen werden? Im Vordergrund der Untersuchung steht die Betrachtung von Pre-, In- und Post-Prozessen generativer wie auch konventioneller Produktionsverfahren. Bei der Gegenüberstellung der Prozessketten werden Maßstäbe angesetzt, die derzeit bei der Bauteilherstellung im Automobilbau Gültigkeit haben und auf Kriterien wie Effizienz, Reproduzierbarkeit und Kontrollierbarkeit aufbauen. Schließlich findet eine Einschätzung aus der Perspektive der Technologieintegration in derzeitige Produktionssysteme und Lieferketten statt. Es werden Restriktionen und Handlungsfelder von generativen Prozessen deutlich, die für den Einsatz für Endkunden-Bauteile im Fahrzeugbau behandelt werden müssen.

Blattmeier

Technische Produktionssysteme und Prozesse - welcher Technologie auch immer - müssen den Bedürfnissen der industriellen Bauteilherstellung für Endanwendungen im Automobilbau entsprechen. Es stellt sich zunächst die Frage, auf welchem technologischen Reifegrad sich die generativen Technologien für den Automobilbau derzeit befinden? Welche außerordentlichen Vorteile können generative Prozessketten gegenüber konventionellen Herstellungsverfahren bieten und welche Hürden müssen genommen werden? Im Vordergrund der Untersuchung steht die Betrachtung von Pre-, In- und Post-Prozessen generativer wie auch konventioneller Produktionsverfahren. Bei der Gegenüberstellung der Prozessketten werden Maßstäbe angesetzt, die derzeit bei der Bauteilherstellung im Automobilbau Gültigkeit haben und auf Kriterien wie Effizienz, Reproduzierbarkeit und Kontrollierbarkeit aufbauen. Schließlich findet eine Einschätzung aus der Perspektive der Technologieintegration in derzeitige Produktionssysteme und Lieferketten statt. Es werden Restriktionen und Handlungsfelder von generativen Prozessen deutlich, die für den Einsatz für Endkunden-Bauteile im Fahrzeugbau behandelt werden müssen.

An Empirical Analysis of Manufacturing Overhead Cost Drivers

Empirical validity of the claim that overhead costs are driven not by production volume but by transactions resulting from production complexity is examined using data from 32 manufacturing plants from the electronics, machinery, and automobile components industries. Transactions are measured using number of engineering change orders, number of purchasing and production planning personnel, shop- floor area per part, and number of quality control and improvement personnel. Results indicate a strong positive relation between manufacturing overhead costs and both manufacturing transactions and production volume. Most of the variation in overhead costs, however, is explained by measures of manufacturing transactions, not volume.

Evaluation of automobile drivetrain components to improve fuel economy. Final report.

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

Study and test to confirm automobile drivetrain components to improve fuel economy. Volume I: history of the automobile transmission in the United States. Interim report.

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

Study and test to confirm automobile drivetrain components to improve fuel economy. Volume II: the drivetrain design process with an automatic transmission. Interim report.

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

Clusters and Innovation: Beijing's Hi-technology Industry Cluster and Guangzhou's Automobile Industry Cluster

This paper proposes a flowchart approach to the automobile industry cluster policy and the hi-technology industry cluster policy to prioritize policy measures. First, in the automobile industry cluster, suppliers of parts and components to anchor firms such as Honda, Nissan and Toyota of Japanese assembly makers in Guangzhou, China, can innovate partly because the suppliers have become independent of their anchor firms in the Japanese Keiretsu system. Second, concerning the hi-technology industry clustering in Beijing, we show that the existence of universities is a precondition for the industrial cluster policy and that the leadership of the Zhongguancun Science Park Management Committee of Beijing Municipality is crucial to the success of the industrial cluster policy. The flowchart for the hi-technology industry is different from the one for the automobile industry cluster.

Knowledge spillover in Indian automobile industry : the process and the coverage

In India, as the production of passenger cars increased, many local small and medium enterprises (SMEs) entered the parts and components manufacturing sector. The sources of knowledge for large enterprises and SMEs are different. Naturally, spillover effects among large enterprises and between large enterprises and SMEs are different. This paper focuses on knowledge spillover among large enterprises and from large enterprises to SMEs. Subcontractor can absorb relation-specific skills through repeated interaction with parent company. The results of field survey emphasizes that relation-specific skills are a determinant factor of spillover effects from assemblers and large auto component manufacturers to SMEs. Econometric analysis shows that spillover effects among medium and large automobile units and from medium and large automobile units to small units went beyond boundary of cluster.

Analysis of federal stimuli to development of new technology by suppliers to automobile manufacturers. An exploratory study of barriers and facilitators. Final report.

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

Import passenger automobile weight projections 1979-1986: Mercedes-Benz, BMW, Volvo, BL Ltd. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Domestic passenger automobile weight projections, 1979-1986. GM, Ford, Chrysler, AMC. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Parametric analysis of light truck and automobile maintenance. Final report.

Transportation Systems Center, Cambridge, Mass.

Evaluation of techniques for reducing in-use automobile fuel consumption. Final report.

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

The acceptability of alcohol fuels for automobile engines

The aim of this project was to carry out an investigastion into suitable alternatives to gasoline for use in modern automobiles. The fuel would provide the western world with a means of extending the natural gasoline resources and the third world a way of cutting down their dependence on the oil producing countries for their energy supply. Alcohols, namely methanol and ethanol, provide this solution. They can be used as gasoline extenders or as fuels on their own.In order to fulfil the aims of the project a literature study was carried out to investigate methods and costs of producing these fuels. An experimental programme was then set up in which the performance of the alcohols was studied on a conventional engine. The engine used for this purpose was the Fiat 127 930cc four cylinder engine. This engine was used because of its popularity in the European countries. The Weber fixed jet carburettor, since it was designed to be used with gasoline, was adapted so that the alcohol fuels and the blends could be used in the most efficient way. This was mainly to take account of the lower heat content of the alcohols. The adaptation of the carburettor was in the form of enlarging the main metering jet. Allowances for the alcohol's lower specfic gravity were made during fuel metering.Owing to the low front end volatility of methanol and ethanol, it was expected that `start up' problems would occur. An experimental programme was set up to determine the temperature range for a minimum required percentage `take off' that would ease start-up since it was determined that a `take off' of about 5% v/v liquid in the vapour phase would be sufficient for starting. Additions such as iso-pentane and n-pentane were used to improve the front end volatility. This proved to be successful.The lower heat content of the alcohol fuels also meant that a greater charge of fuel would be required. This was seen to pose further problems with fuel distribution from the carburettor to the individual cylinders on a multicylinder engine. Since it was not possible to modify the existing manifold on the Fiat 127 engine, experimental tests on manifold geometry were carried out using the Ricardo E6 single cylinder variable compression engine. Results from these tests showed that the length, shape and cross-sectional area of the manifold play an important part in the distribution of the fuel entering the cylinder, ie. vapour phase, vapour/small liquid droplet/liquid film phase, vapour/large liquid droplet/liquid film phase etc.The solvent properties of the alcohols and their greater electrical conductivity suggested that the materials used on the engine would be prone to chemical attack. In order to determine the type and rate of chemical attack, an experimental programme was set up whereby carburettor and other components were immersed in the alcohols and in blends of alcohol with gasoline. The test fuels were aerated and in some instances kept at temperatures ranging from 50oC to 90oC. Results from these tests suggest that not all materials used in the conventional engine are equally suitable for use with alcohols and alcohol/gasoline blends. Aluminium for instance was severely attacked by methanol causing pitting and pin-holing in the surface.In general this whole experimental programme gave valuable information on the acceptability of substitute fuels. While the long term effects of alcohol use merit further study, it is clear that methanol and ethanol will be increasingly used in place of gasoline.