Revisión sistemática de la producción española sobre rendimiento académico entre 1980 y 2011

El bajo rendimiento académico sigue siendo un problema de investigación de gran impacto social. Sin embargo, los resultados científicos no están teniendo repercusión en la mejora, ni en las políticas educativas. En este trabajo nos propusimos identificar, ordenar, analizar y extraer conclusiones sobre la producción española sobre rendimiento académico, con el fin de visualizarla y derivar problemas futuros objeto de investigación. Para ello se llevó a cabo un estudio de revisión en seis etapas, en el que se combinaron procedimientos metodológicos de investigación de síntesis y de investigación bibliométrica. Se identificaron las publicaciones en cuatro bases de datos españolas; posteriormente se analizaron y codificaron los datos extraídos alrededor de nueve indicadores: título, año, tipo de documento, editorial, autor, número autores, institución, comunidad autónoma y tema. Los resultados muestran una producción constante y creciente (1595 referencias), pero dispersa, tanto por el inmenso número de autores que publican, la mayoría con un solo trabajo, como por los lugares donde publican. Las temáticas más tratadas se refieren en primer lugar a modelos explicativos, diagnóstico y tratamiento; en segundo lugar se abordan los factores y variables determinantes del bajo y alto rendimiento académico; en tercer lugar se desarrollan estudios sobre legislación y de otras variables psicológicas y educativas en relación con el rendimiento. Este estudio supone una aproximación sintetizada de la producción sobre rendimiento académico en España, y un primer paso para investigaciones de síntesis posteriores, que nos permitan identificar buenas prácticas para el ejercicio de “prácticas basadas en la evidencia”, y otros problemas de investigación.

El número de autores en Gaceta Sanitaria

Carta a la directora

Annals of Peterhead from its foundation to the present time ... with a number of curious articles hitherto unpublished. With plates, engraved by the author.

Mode of access: Internet.

Who is publishing in the Journal of Sociology? an analysis of author trends 1965–2008

This paper presents the author characteristics of papers published in The Australian Sociological Association (TASA) journal, the Journal of Sociology (formerly the Australian and New Zealand Journal of Sociology) between 1965 and 2008. The aim of the paper is empirically to identify trends in authorship. The review examines all articles published in the period (excluding book reviews). The rationale of the study is to reveal trends in who publishes in the journal in terms of authors’ academic rank, gender, institution, and country. A table of those who have published the greatest number of papers is also presented. Findings show that over time the gap between the proportion of males and females publishing has closed; more PhD students and research fellows are publishing in the journal in recent decades; the highest proportion of authors consistently come from the Australian National University and The University of Queensland; and most authors are located in Australia. Information such as this can inform editorial practices and serve to inform the membership and readership on the nature of the journal.

Influence of medium range transport of particles from nucleation burst on particle number concentration within the urban airshed

An elevated particle number concentration (PNC) observed during nucleation events could play a significant contribution to the total particle load and therefore to the air pollution in the urban environments. Therefore, a field measurement study of PNC was commenced to investigate the temporal and spatial variations of PNC within the urban airshed of Brisbane, Australia. PNC was monitored at urban (QUT), roadside (WOO) and semi-urban (ROC) areas around the Brisbane region during 2009. During the morning traffic peak period, the highest relative fraction of PNC reached about 5% at QUT and WOO on weekdays. PNC peaks were observed around noon, which correlated with the highest solar radiation levels at all three stations, thus suggesting that high PNC levels were likely to be associated with new particle formation caused by photochemical reactions. Wind rose plots showed relatively higher PNC for the NE direction, which was associated with industrial pollution, accounting for 12%, 9% and 14% of overall PNC at QUT, WOO and ROC, respectively. Although there was no significant correlation between PNC at each station, the variation of PNC was well correlated among three stations during regional nucleation events. In addition, PNC at ROC was significantly influenced by upwind urban pollution during the nucleation burst events, with the average enrichment factor of 15.4. This study provides an insight into the influence of regional nucleation events on PNC in the Brisbane region and it the first study to quantify the effect of urban pollution on semi-urban PNC through the nucleation events. © 2012 Author(s).

Adaptive sizing of populations and number of islands in distributed genetic algorithms

Deciding the appropriate population size and number of is- lands for distributed island-model genetic algorithms is often critical to the algorithm’s success. This paper outlines a method that automatically searches for good combinations of island population sizes and the number of islands. The method is based on a race between competing parameter sets, and collaborative seeding of new parameter sets. This method is applicable to any problem, and makes distributed genetic algorithms easier to use by reducing the number of user-set parameters. The experimental results show that the proposed method robustly and reliably finds population and islands settings that are comparable to those found with traditional trial-and-error approaches.

Particle number emissions from a large fleet of diesel and CNG buses

Exhaust emissions were monitored in real-time at the kerb of a busy busway used by a mix of diesel and CNG-powered transport buses. Particle number concentration in the size range 3 nm to 3 µm was measured with a TSI condensation particle counter (CPC 3025). Particle mass (PM2.5) was measured with a TSI Dustrak 8520. The CO2 emissions were measured with a fast response CO2 analyser (Sable CA-10A). All emission concentrations were recorded in real time at 1 sec resolution, together with the precise passage times of buses. The instantaneous ratio of particle number (or mass) to CO2 concentration, denoted Z, was used as a measure of the particle number (or mass) emission factor of each passing bus.

Nano and ultrafine particle number concentrations in different environments : application towards air quality regulations

Particle number concentrations vary significantly with environment and, in this study, we attempt to assess the significance of these differences. Towards this aim, we reviewed 85 papers that have reported particle number concentrations levels at 126 sites covering different environments. We grouped the results into eight categories according to measurement location including: road tunnel, on-road, road-side, street canyon, urban, urban background, rural, and clean background. From these reports, the overall median number concentration for each of the eight site categories was calculated. The eight location categories may be classified into four distinct groups. The mean median particle number locations for these four types were found to be statistically different from each other. Rural and clean background sites had the lowest concentrations of about 3x103 cm-3. Urban and urban background sites showed concentrations that were three times higher (9x103 cm-3). The mean concentration for the street canyon, roadside and on-road measurement sites was 4.6x104 cm-3, while the highest concentrations were observed in the road tunnels (8.6x104 cm-3). This variation is important when assessing human exposure-response for which there is very little data available, making it difficult to develop health guidelines, a basis for national regulations. Our analyses shows that the current levels in environments affected by vehicle emissions are 3 to 28 times higher than in the natural environments. At present, there is no threshold level in response to exposure to ultrafine particles. Therefore, future control and management strategies should target a decrease of these particles in urban environments by more than one order of magnitude to bring them down to the natural background. At present there is a long way to go to achieve this.

Comparison of particle number concentrations between different environments

Particle number concentrations vary significantly with environment and, in this study, we attempt to assess the significance of these differences. Towards this aim, we reviewed 85 papers that have reported particle number concentrations levels at 126 sites covering different environments. We grouped the results into eight categories according to measurement location including: road tunnel, on-road, road-side, street canyon, urban, urban background, rural, and clean background. Median values were calculated for each category. This review was restricted to papers that presented concentrations numerically. The majority of the reports were based on either CPC or SMPS measurements, with a limited number of papers reporting results from both instruments at the same site. Hence there were several overlaps between the number of CPC and SMPS measuring sites. Most of the studies reported multiple measurements at a given study site, while some studies included results from more than one site. From these reports, the overall median value for each location category was calculated...

Overfitting Bayesian mixture models with an unknown number of components

This paper proposes solutions to three issues pertaining to the estimation of finite mixture models with an unknown number of components: the non-identifiability induced by overfitting the number of components, the mixing limitations of standard Markov Chain Monte Carlo (MCMC) sampling techniques, and the related label switching problem. An overfitting approach is used to estimate the number of components in a finite mixture model via a Zmix algorithm. Zmix provides a bridge between multidimensional samplers and test based estimation methods, whereby priors are chosen to encourage extra groups to have weights approaching zero. MCMC sampling is made possible by the implementation of prior parallel tempering, an extension of parallel tempering. Zmix can accurately estimate the number of components, posterior parameter estimates and allocation probabilities given a sufficiently large sample size. The results will reflect uncertainty in the final model and will report the range of possible candidate models and their respective estimated probabilities from a single run. Label switching is resolved with a computationally light-weight method, Zswitch, developed for overfitted mixtures by exploiting the intuitiveness of allocation-based relabelling algorithms and the precision of label-invariant loss functions. Four simulation studies are included to illustrate Zmix and Zswitch, as well as three case studies from the literature. All methods are available as part of the R package Zmix, which can currently be applied to univariate Gaussian mixture models.

Mediated music makers : Constructing author images in popular music

The subject of the thesis is the mediated construction of author images in popular music. In the study, the construction of images is treated as a process in which artists, the media and the members of the audience participate. The notions of presented, mediated and compiled author images are used in explaining the mediation process and the various authorial roles of the agents involved. In order to explore the issue more closely, I analyse the author images of a group of popular music artists representing the genres of rock, pop and electronic dance music. The analysed material consists mostly of written media texts through which the artists authorial roles and creative responsibilities are discussed. Theoretically speaking, the starting points for the examination lie in cultural studies and discourse analysis. Even though author images may be conceived as intertextual constructions, the artist is usually presented as a recognizable figure whose purpose is to give the music its public face. This study does not, then, deal with musical authors as such, but rather with their public images and mediated constructions. Because of the author-based functioning of popular music culture and the idea of the artist s individual creative power, the collective and social processes involved in the making of popular music are often superseded by the belief in a single, originating authorship. In addition to the collective practices of music making, the roles of the media and the marketing machinery complicate attempts to clarify the sharing of authorial contributions. As the case studies demonstrate, the differences between the examined author images are connected with a number of themes ranging from issues of auteurism and stardom to the use of masked imagery and the blending of authorial voices. Also the emergence of new music technologies has affected not only the ways in which music is made, but also how the artist s authorial status and artistic identity is understood. In the study at hand, the author images of auteurs, stars, DJs and sampling artists are discussed alongside such varied topics as collective authorship, evaluative hierarchies, visual promotion and generic conventions. Taken altogether, the examined case studies shed light on the functioning of popular music culture and the ways in which musical authorship is (re)defined.

Editorial of "International Journal of Critical Indigenous Studies, Volume 7, Number 1, 2014"

This edition testifies to the broad international reach of the journal, with contributions variously concerned with Arctic Indigenous communities, the Métis of Canada, Native Hawaiians and Māori of Aotearoa (New Zealand). Two articles stress the need to work collaboratively and respectfully with Indigenous populations whilst conducting research. The first, by Gwen Healey, notes the increased interest in health research in the Arctic, particularly with Inuit populations. Healy seeks to add to the growing body of literature concerned with Indigenous ways of knowing by highlighting Inuit concepts that inform an effective Arctic research model. The second, by primary author Peter Hutchinson and a range of co-contributors, highlights the ways in which Métis collaborators working in health developed a participatory Indigenous research method that was unique in that it foregrounded Métis relationships and relationality. In so doing, the researchers were able to give substance to otherwise staid policy statements about the need for good ethical research conduct.

Natural convection in rectangular cavities at high Rayleigh number

Natural convection in rectangular two-dimensional cavities with differentially heated side walls is a standard problem in numerical heat transfer. Most of the existing studies has considered the low Ra laminar regime. The general thrust of the present research is to investigate higher Ra flows extending into the unsteady and turbulent regimes where the physics is not fully understood and appropriate models for turbulence are not yet established. In the present study the Boussinesq approximation is being used, but the theoretical background and some preliminary results have been obtained[1] for flows with variable properties.

Accuracy in Copy Number Calling by qPCR and PRT : A Matter of DNA

7 p.

On the number of generations of tendipes in collective ponds in Kuibyshchevskoi district [Translation from: C.R. Acad.Sci. U.R.S.S. 95, 1113-1115, 1954]

Three ponds were chosen for this study. The two lower ones were of 2 - 4 hectares in area, the depth of the littoral zone was 2.5 - 3 metres at the time of maximum flooding and the mud which covered the floor of the ponds was homogeneous and autochthonous in nature with very few vegetable remnants. The ponds which were originally set up in 1950. were intended for water supply and populated with Crucian Carp (for human consumption). A survey was done in the ponds in order to establish number and biomass of Tendipes semireductus. The author concludes that in these ponds T.semireductus has 2-3 generations per year.