Towards the validation of "in silico" models and physicochemical filters to identify and characterize new chemical entities

Summary: Lipophilicity plays an important role in the determination and the comprehension of the pharmacokinetic behavior of drugs. It is usually expressed by the partition coefficient (log P) in the n-octanol/water system. The use of an additional solvent system (1,2-dichlorethane/water) is necessary to obtain complementary information, as the log Poct values alone are not sufficient to explain ail biological properties. The aim of this thesis is to develop tools allowing to predict lipophilicity of new drugs and to analyze the information yielded by those log P values. Part I presents the development of theoretical models used to predict lipophilicity. Chapter 2 shows the necessity to extend the existing solvatochromic analyses in order to predict correctly the lipophilicity of new and complex neutral compounds. In Chapter 3, solvatochromic analyses are used to develop a model for the prediction of the lipophilicity of ions. A global model was obtained allowing to estimate the lipophilicity of neutral, anionic and cationic solutes. Part II presents the detailed study of two physicochemical filters. Chapter 4 shows that the Discovery RP Amide C16 stationary phase allows to estimate lipophilicity of the neutral form of basic and acidic solutes, except of lipophilic acidic solutes. Those solutes present additional interactions with this particular stationary phase. In Chapter 5, 4 different IANI stationary phases are investigated. For neutral solutes, linear data are obtained whatever the IANI column used. For the ionized solutes, their retention is due to a balance of electrostatic and hydrophobie interactions. Thus no discrimination is observed between different series of solutes bearing the same charge, from one column to an other. Part III presents two examples illustrating the information obtained thanks to Structure-Properties Relationships (SPR). Comparing graphically lipophilicity values obtained in two different solvent systems allows to reveal the presence of intramolecular effects .such as internai H-bond (Chapter 6). SPR is used to study the partitioning of ionizable groups encountered in Medicinal Chemistry (Chapter7). Résumé La lipophilie joue un .rôle important dans la détermination et la compréhension du comportement pharmacocinétique des médicaments. Elle est généralement exprimée par le coefficient de partage (log P) d'un composé dans le système de solvants n-octanol/eau. L'utilisation d'un deuxième système de solvants (1,2-dichloroéthane/eau) s'est avérée nécessaire afin d'obtenir des informations complémentaires, les valeurs de log Poct seules n'étant pas suffisantes pour expliquer toutes les propriétés biologiques. Le but de cette thèse est de développer des outils permettant de prédire la lipophilie de nouveaux candidats médicaments et d'analyser l'information fournie par les valeurs de log P. La Partie I présente le développement de modèles théoriques utilisés pour prédire la lipophilie. Le chapitre 2 montre la nécessité de mettre à jour les analyses solvatochromiques existantes mais inadaptées à la prédiction de la lipophilie de nouveaux composés neutres. Dans le chapitre 3, la même méthodologie des analyses solvatochromiques est utilisée pour développer un modèle permettant de prédire la lipophilie des ions. Le modèle global obtenu permet la prédiction de la lipophilie de composés neutres, anioniques et cationiques. La Partie II présente l'étude approfondie de deux filtres physicochimiques. Le Chapitre 4 montre que la phase stationnaire Discovery RP Amide C16 permet la détermination de la lipophilie de la forme neutre de composés basiques et acides, à l'exception des acides très lipophiles. Ces derniers présentent des interactions supplémentaires avec cette phase stationnaire. Dans le Chapitre 5, 4 phases stationnaires IAM sont étudiées. Pour les composés neutres étudiés, des valeurs de rétention linéaires sont obtenues, quelque que soit la colonne IAM utilisée. Pour les composés ionisables, leur rétention est due à une balance entre des interactions électrostatiques et hydrophobes. Donc aucune discrimination n'est observée entre les différentes séries de composés portant la même charge d'une colonne à l'autre. La Partie III présente deux exemples illustrant les informations obtenues par l'utilisation des relations structures-propriétés. Comparer graphiquement la lipophilie mesurée dans deux différents systèmes de solvants permet de mettre en évidence la présence d'effets intramoléculaires tels que les liaisons hydrogène intramoléculaires (Chapitre 6). Cette approche des relations structures-propriétés est aussi appliquée à l'étude du partage de fonctions ionisables rencontrées en Chimie Thérapeutique (Chapitre 7) Résumé large public Pour exercer son effet thérapeutique, un médicament doit atteindre son site d'action en quantité suffisante. La quantité effective de médicament atteignant le site d'action dépend du nombre d'interactions entre le médicament et de nombreux constituants de l'organisme comme, par exemple, les enzymes du métabolisme ou les membranes biologiques. Le passage du médicament à travers ces membranes, appelé perméation, est un paramètre important à optimiser pour développer des médicaments plus puissants. La lipophilie joue un rôle clé dans la compréhension de la perméation passive des médicaments. La lipophilie est généralement exprimée par le coefficient de partage (log P) dans le système de solvants (non miscibles) n-octanol/eau. Les valeurs de log Poct seules se sont avérées insuffisantes pour expliquer la perméation à travers toutes les différentes membranes biologiques du corps humain. L'utilisation d'un système de solvants additionnel (le système 1,2-dichloroéthane/eau) a permis d'obtenir les informations complémentaires indispensables à une bonne compréhension du processus de perméation. Un grand nombre d'outils expérimentaux et théoriques sont à disposition pour étudier la lipophilie. Ce travail de thèse se focalise principalement sur le développement ou l'amélioration de certains de ces outils pour permettre leur application à un champ plus large de composés. Voici une brève description de deux de ces outils: 1)La factorisation de la lipophilie en fonction de certaines propriétés structurelles (telle que le volume) propres aux composés permet de développer des modèles théoriques utilisables pour la prédiction de la lipophilie de nouveaux composés ou médicaments. Cette approche est appliquée à l'analyse de la lipophilie de composés neutres ainsi qu'à la lipophilie de composés chargés. 2)La chromatographie liquide à haute pression sur phase inverse (RP-HPLC) est une méthode couramment utilisée pour la détermination expérimentale des valeurs de log Poct.

Die Verbindung von Kleinwinkelstreuung und in silico-Methodik zur Aufklärung von Konformationswechseln großer Proteinkomplexe

In dieser Dissertation wurden die Methoden Homologiemodellierung und Molekulardynamik genutzt, um die Struktur und das Verhalten von Proteinen in Lösung zu beschreiben. Mit Hilfe der Röntgenkleinwinkelstreuung wurden die mit den Computermethoden erzeugten Vorhersagen verifiziert. Für das alpha-Hämolysin, ein Toxin von Staphylococcus aureus, das eine heptamere Pore formen kann, wurde erstmalig die monomere Struktur des Protein in Lösung beschrieben. Homologiemodellierung auf Basis verwandter Proteine, deren monomere Struktur bekannt war, wurde verwendet, um die monomere Struktur des Toxins vorherzusagen. Flexibilität von Strukturelementen in einer Molekulardynamiksimulation konnte mit der Funktionalität des Proteines korreliert werden: Intrinsische Flexibilität versetzt das Protein in die Lage den Konformationswechsel zur Pore nach Assemblierung zu vollziehen. Röntgenkleinwinkelstreuung bewies die Unterschiede der monomeren Struktur zu den Strukturen der verwandten Proteine und belegt den eigenen Vorschlag zur Struktur. Überdies konnten Arbeiten an einer Mutante, die in einer sogenannten Präporenkonformation arretiert und nicht in der Lage ist eine Pore zu formen, zeigen, dass dieser Übergangszustand mit der Rotationsachse senkrecht zur Membran gelagert ist. Eine geometrische Analyse beweist, dass es sterisch möglich ist ausgehend von dieser Konformation die Konformation der Pore zu erreichen. Eine energetische und kinetische Analyse dieses Konformationswechsels steht noch aus. Ein weiterer Teil der Arbeit befasst sich mit den Konformationswechseln von Hämocyaninen. Diese wurden experimentell mittels Röntgenkleinwinkelstreuung verfolgt. Konformationswechsel im Zusammenhang mit der Oxygenierung konnten für die 24meren Hämocyanine von Eurypelma californicum und Pandinus imperator beschrieben werden. Für eine Reihe von Hämocyaninen ist nachgewiesen, dass sie unter Einfluss des Agenz SDS Tyrosinaseaktivität entfalten können. Der Konformationswechsel der Hämocyanine von E. californicum und P. imperator bei der Aktivierung zur Tyrosinase mittels SDS wurde experimentell bestätigt und die Stellung der Dodekamere der Hämocyanine als wesentlich bei der Aktivierung festgestellt. Im Zusammenhang mit anderen Arbeiten gilt damit die Relaxierung der Struktur unter SDS-Einfluss und der sterische Einfluss auf die verbindenden Untereinheiten b & c als wahrscheinliche Ursache für die Aktivierung zur Tyrosinase. Eigene Software zum sogenannten rigid body-Modellierung auf der Basis von Röntgenkleinwinkelstreudaten wurde erstellt, um die Streudaten des hexameren Hämocyanins von Palinurus elephas und Palinurus argus unter Einfluss der Effektoren Urat und Koffein strukturell zu interpretieren. Die Software ist die erste Implementierung eines Monte Carlo-Algorithmus zum rigid body-Modelling. Sie beherrscht zwei Varianten des Algorithmus: In Verbindung mit simulated annealing können wahrscheinliche Konformationen ausgefiltert werden und in einer anschließenden systematischen Analyse kann eine Konformation geometrisch beschrieben werden. Andererseits ist ein weiterer, reiner Monte Carlo-Algorithmus in der Lage die Konformation als Dichteverteilung zu beschreiben.

Estudo in silico das interações da protease NS3-NS2B de DENV-2 com o inibidor peptídico Bz-nKRR-H com finalidades terapêuticas

Dengue virus is an important patogen that causes Dengue desease in all world, and belongs to Flavivirus gender. The virus consists of enveloped RNA with a single strand positive sense, 11Kb genome. The RNA is translated into a polyprotein precursor, wich is cleaved into 3 structural proteins (C, prM e E) and 7 non-structural proteins (NS1, NS2A, NS2B, NS3, NS4A, NS4B e NS5). The NS3 is a multifunctional protein, that besides to promote the polyprotein precursor cleavage, also have NTPase, helicase and RTPase activity. The NS3 needs a hydrophilic segment of 40 residues from the transmembrane NS2B protein (who acts like cofator) to realize this functions. Actually, there's no vacines available on the market, and the treatment are just symptomatic. The tetrapeptide inhibitor Bz-Nle-Lys-Arg-Arg-H (Ki de 5,8-7,0 M) was showed as a potent inhibitor μ for NS3prot in Dengue virus. That is a inteligent alternative to treat the dengue desease. The present work aimed analyse the interactions of the ligand bounded to the activity site to provid a clear and depth vision of that interaction. For this purpouse, it was conducted an in silico study, by using quantum mechanical calculations based on Density Functional Theory (DFT), with Generalized Gradient approximation (GGA) to describe the effects of exchange and correlation. The interaction energy of each amino acid belonging to the binding site to the ligand was calculated the using the method of molecular fragmentation with conjugated caps (MFCC). Besides energy, we calculated the distances, types of molecular interactions and atomic groups involved. The theoretical models used were satisfactory and show a more accurate description when the dielectric constant = 20 ε and 80 was used. The results demonstrate that the interaction energy of the system reached convergence at 13.5 A. Within a radius of 13,5A the most important residues were identified. Met49, Met84 and Asp81 perform interactions of hydrogen with the ligant. The Asp79 and Asp75 residues present high energy of attraction. Arg54, Arg85 and Lys 131 perform hydrogen interactions with the ligand, however, appear in BIRD graph having high repulsion energy with the inhibitor. The data also emphasizes the importance of residue Tyr161 and the involvement of the catalytic triad composed by Asp75, His51 and Ser135

Towards in silico IBV vaccine design: defining the role of polymorphism in viral attenuation

The gammacoronavirus, Infectious Bronchitis Virus (IBV), is a respiratory pathogen of chickens. IBV is a constant threat to poultry production as established vaccines are often ineffective against emerging strains. This requires constant and rapid vaccine production by a process of viral attenuation by egg passage, but the essential forces leading to attenuation in the virus have not yet been characterised. Knowledge of these factors will lead to the development of more effective, rationally attenuated, live vaccines and reduction of the mortality and morbidity caused by this pathogen. M41 CK strain was egg passaged four times many years ago at Houghton Poultry Research Station and stored as M41-CK EP4 (stock virus at The Pirbright Institute since 1992). It was the first egg passage to have its genome pyrosequenced and was therefore used as the baseline reference. The overall aim of this project was to analyse deep sequence data obtained from four IBV isolates (called A, A1, C and D) each originating from the common M41-CK EP4 (ep4) and independently passaged multiple times in embryonated chicken eggs (figure 1.1). Highly polymorphic encoding regions of the IBV genome were then identified which are likely involved in the attenuation process through the formation of independent SNPs and/or SNP clusters. This was then used to direct targeted investigation of SNPs during the attenuation process of the four IBV passages. A previously generated deep sequence dataset was used as a preliminary map of attenuation for one virulent strain of IBV. This investigation showed the nucleocapsid and spike as two highly polymorphic encoding regions within the IBV genome with the highest proportion of SNPs compared to encoding region size. This analysis then led to more focussed studies of the nucleocapsid and spike encoding region with the ultimate aim of mapping key attenuating regions and nucleotide positions. The 454 pyrosequencing data and further investigation of nucleocapsid and spike encoding regions have identified the SNPs present at the same nucleotide positions within analysed A, A1, C and D isolates. These SNPs probably play a crucial role in viral attenuation and universal vaccine production but it is not clear if independent SNPs are also involved in loss of virulence. The majority of SNPs accumulated at different nucleotide positions without further continuation in Sanger sequenced egg passages presenting S2 subunit (spike) and nucleocapsid as polymorphic encoding regions which in nature remain highly conserved.

In silico analysis of Simple Sequence Repeats from chloroplast genomes of Solanaceae species

The availaibilty of chloroplast genome (cpDNA) sequences of Atropa belladonna, Nicotiana sylvestris, N tabacum, N tomentosiformis, Solanum bulbocastanum, S lycopersicum and S tuberosum, which are Solanaceae species, allowed us to analyze the organization of cpSSRs in their genic and intergenic regions In general, the number of cpSSRs in cpDNA ranged from 161 in S tuberosum to 226 in N tabacum, and the number of intergenic cpSSRs was higher than genic cpSSRs The mononucleotide repeats were the most frequent in studied species, but we also identified di-, tri-, tetra-, penta- and hexanucleotide repeats Multiple alignments of all cpSSRs sequence from Solanaceae species made the identification of nucleotide variability possible and the phylogeny was estimated by maximum parsimony Our study showed that the plastome database can be exploited for phylogenetic analyses and biotechnological approaches

In silico analysis of candidate genes involved in light sensing and signal transduction pathways in soybean

Several aspects of photoperception and light signal transduction have been elucidated by studies with model plants. However, the information available for economically important crops, such as Fabaceae species, is scarce. In order to incorporate the existing genomic tools into a strategy to advance soybean research, we have investigated publicly available expressed sequence tag ( EST) sequence databases in order to identify Glycine max sequences related to genes involved in light-regulated developmental control in model plants. Approximately 38,000 sequences from open-access databases were investigated, and all bona fide and putative photoreceptor gene families were found in soybean sequence databases. We have identified G. max orthologs for several families of transcriptional regulators and cytoplasmic proteins mediating photoreceptor-induced responses, although some important Arabidopsis phytochrome-signaling components are absent. Moreover, soybean and Arabidopsis gene-family homologs appear to have undergone a distinct expansion process in some cases. We propose a working model of light perception, signal transduction and response-eliciting in G. max, based on the identified key components from Arabidopsis. These results demonstrate the power of comparative genomics between model systems and crop species to elucidate several aspects of plant physiology and metabolism.

Biomimetic in silico devices

We introduce biomimetic in silico devices, and means for validation along with methods for testing and refining them. The devices are constructed from adaptable software components designed to map logically to biological components at multiple levels of resolution. In this report we focus on the liver; the goal is to validate components that mimic features of the lobule (the hepatic primary functional unit) and dynamic aspects of liver behavior, structure, and function. An assembly of lobule-mimetic devices represents an in silico liver. We validate against outflow profiles for sucrose administered as a bolus to isolated, perfused rat livers. Acceptable in silico profiles are experimentally indistinguishable from those of the in situ referent. This new technology is intended to provide powerful Dew tools for challenging our understanding of how biological functional units function in vivo.

In silico analysis of microRNAS targeting the HLA-G 3 ` untranslated region alleles and haplotypes

It has been reported that microRNAs (miRNA) may have allele-specific targeting for the 3` untranslated region (3` UTR) of the HLA-G locus. In a previous study, we reported 11 3`UTR haplotypes encompassing the 14-bp insertion/deletion polymorphism and seven SNPs (+3003 T/C, +3010 C/G, +3027 C/A, +3035 C/T, +3142 C/G, +3187A/G,and +3196 C/G), of which only the +3142 C/G SNP has been reported to influence the binding of miRNAs. Using bioinformatics analyses, we identified putative miRNA-binding sites considering the haplotypes encompassing these eight polymorphic sites, and we ranked the lowest free energies that could potentially lead to an mRNA degradation or translational repression. When a specific haplotype or a particular SNP was associated with a miRNA-binding site, we defined a free energy difference of 4 kcal/mol between alleles to classify them energetically distant. The best results were obtained for the miR-513a-5p, miR-518c*, miR-1262 and miR-92a-1*, miR-92a-2*, miR-661, miR-1224-5p, and miR-433 miRNAs, all influencing one or more of the +3003, +3010, +3027, and +3035 SNPs. The miR-2110, miR-93, miR-508-5p, miR-331-5p, miR-616, miR-513b, and miR-589* miRNAs targeted the 14-bp fragment region, and miR-148a, miR-19a*, miR-152, mir-148b,and miR-218-2 also influenced the +3142C/G polymorphism. These results suggest that these miRNAs might play a relevant role on the HLA-G expression pattern. (C) 2009 Published by Elsevier Inc. on behalf of American Society for Histocompatibility and Immunogenetics.

Besnoitia besnoiti protein disulfide isomerase (BbPDI): molecular characterization, expression and in silico modelling

Besnoitia besnoiti is an apicomplexan parasite responsible for bovine besnoitiosis, a disease with a high prevalence in tropical and subtropical regions and re-emerging in Europe. Despite the great economical losses associated with besnoitiosis, this disease has been underestimated and poorly studied, and neither an effective therapy nor an efficacious vaccine is available. Protein disulfide isomerase (PDI) is an essential enzyme for the acquisition of the correct three-dimensional structure of proteins. Current evidence suggests that in Neosporacaninum and Toxoplasmagondii, which are closely related to B. besnoiti, PDI play an important role in host cell invasion, is a relevant target for the host immune response, and represents a promising drug target and/or vaccine candidate. In this work, we present the nucleotide sequence of the B. besnoiti PDI gene. BbPDI belongs to the thioredoxin-like superfamily (cluster 00388) and is included in the PDI_a family (cluster defined cd02961) and the PDI_a_PDI_a'_c subfamily (cd02995). A 3D theoretical model was built by comparative homology using Swiss-Model server, using as a template the crystallographic deduced model of Tapasin-ERp57 (PDB code 3F8U chain C). Analysis of the phylogenetic tree for PDI within the phylum apicomplexa reinforces the close relationship among B. besnoiti, N. caninum and T. gondii. When subjected to a PDI-assay based on the polymerisation of reduced insulin, recombinant BbPDI expressed in E. coli exhibited enzymatic activity, which was inhibited by bacitracin. Antiserum directed against recombinant BbPDI reacted with PDI in Western blots and by immunofluorescence with B. besnoiti tachyzoites and bradyzoites.

Algorithms and tools for in silico design of cell factories

PhD thesis in Bioengineering

Improvement of in silico strain engineering methods in Saccharomyces cerevisiae

PhD thesis in Bioengineering

In silico constraint-based strain optimization methods: the quest for optimal cell factories

Shifting from chemical to biotechnological processes is one of the cornerstones of 21st century industry. The production of a great range of chemicals via biotechnological means is a key challenge on the way toward a bio-based economy. However, this shift is occurring at a pace slower than initially expected. The development of efficient cell factories that allow for competitive production yields is of paramount importance for this leap to happen. Constraint-based models of metabolism, together with in silico strain design algorithms, promise to reveal insights into the best genetic design strategies, a step further toward achieving that goal. In this work, a thorough analysis of the main in silico constraint-based strain design strategies and algorithms is presented, their application in real-world case studies is analyzed, and a path for the future is discussed.

Traumazentrierte Pädagogik in der stationären Kinder- und Jugendhilfe : eine Analyse in Bezug auf Durchführbarkeit und Realisierbarkeit

[s.c.]

Faire la ville juste : une analyse "in itinere" de la maîtrise publique d'ouvrage du projet urbain Carré de Soie (métropole lyonnaise)

Dans certaines portions des agglomérations (poches de pauvreté de centre-ville, couronnes suburbaines dégradées, espaces périurbains sans aménité), un cumul entre des inégalités sociales (pauvreté, chômage, etc.) et environnementales (exposition au bruit, aux risques industriels, etc.) peut être observé. La persistance de ces inégalités croisées dans le temps indique une tendance de fond : la capacité d'accéder à un cadre de vie de qualité n'est pas équitablement partagée parmi les individus. Ce constat interroge : comment se créent ces inégalités ? Comment infléchir cette tendance et faire la ville plus juste ?¦Apporter des réponses à cette problématique nécessite d'identifier les facteurs de causalités qui entrent en jeu dans le système de (re)production des inégalités urbaines. Le fonctionnement des marchés foncier et immobilier, la « tyrannie des petites décisions » et les politiques publiques à incidence spatiale sont principalement impliqués. Ces dernières, agissant sur tous les éléments du système, sont placées au coeur de ce travail. On va ainsi s'intéresser précisément à la manière dont les collectivités publiques pilotent la production de la ville contemporaine, en portant l'attention sur la maîtrise publique d'ouvrage (MPO) des grands projets urbains.¦Poser la question de la justice dans la fabrique de la ville implique également de questionner les référentiels normatifs de l'action publique : à quelle conception de la justice celle-ci doit- elle obéir? Quatre perspectives (radicale, substantialiste, procédurale et intégrative) sont caractérisées, chacune se traduisant par des principes d'action différenciés. Une méthodologie hybride - empruntant à la sociologie des organisations et à l'analyse des politiques publiques - vient clore le volet théorique, proposant par un détour métaphorique d'appréhender le projet urbain comme une pièce de théâtre dont le déroulement dépend du jeu d'acteurs.¦Cette méthodologie est utilisée dans le volet empirique de la recherche, qui consiste en une analyse de la MPO d'un projet urbain en cours dans la première couronne de l'agglomération lyonnaise : le Carré de Soie. Trois grands objectifs sont poursuivis : descriptif (reconstruire le scénario), analytique (évaluer la nature de la pièce : conte de fée, tragédie ou match d'improvisation ?) et prescriptif (tirer la morale de l'histoire). La description de la MPO montre le déploiement successif de quatre stratégies de pilotage, dont les implications sur les temporalités, le contenu du projet (programmes, morphologies) et les financements publics vont être déterminantes. Sur la base de l'analyse, plusieurs recommandations peuvent être formulées - importance de l'anticipation et de l'articulation entre planification et stratégie foncière notamment - pour permettre à la sphère publique de dominer le jeu et d'assurer la production de justice par le projet urbain (réalisation puis entretien des équipements et espaces publics, financement de logements de qualité à destination d'un large éventail de populations, etc.). Plus généralement, un décalage problématique peut être souligné entre les territoires stratégiques pour le développement de l'agglomération et les capacités de portage limitées des communes concernées. Ce déficit plaide pour le renforcement des capacités d'investissement de la structure intercommunale.¦La seule logique du marché (foncier, immobilier) mène à la polarisation sociale et à la production d'inégalités urbaines. Faire la ville juste nécessite une forte volonté des collectivités publiques, laquelle doit se traduire aussi bien dans l'ambition affichée - une juste hiérarchisation des priorités dans le développement urbain - que dans son opérationnalisation - une juste maîtrise publique d'ouvrage des projets urbains.¦Inner-city neighborhoods, poor outskirts, and peri-urban spaces with no amenities usually suffer from social and environmental inequalities, such as poverty, unemployment, and exposure to noise and industrial hazards. The observed persistence of these inequalities over time points to an underlying trend - namely, that access to proper living conditions is fundamentally unequal, thus eliciting the question of how such inequalities are effected and how this trend can be reversed so as to build a more equitable city.¦Providing answers to such questions requires that the causal factors at play within the system of (re)production of urban inequalities be identified. Real estate markets, "micromotives and macrobehavior", and public policies that bear on space are mostly involved. The latter are central in that they act on all the elements of the system. This thesis therefore focuses on the way public authorities shape the production of contemporary cities, by studying the public project ownership of major urban projects.¦The study of justice within the urban fabric also implies that the normative frames of reference of public action be questioned: what conception of justice should public action refer to? This thesis examines four perspectives (radical, substantialist, procedural, and integrative) each of which results in different principles of action. This theoretical part is concluded by a hybrid methodology that draws from sociology of organizations and public policy analysis and that suggests that the urban project may be understood as a play, whose outcome hinges on the actors' acting.¦This methodology is applied to the empirical analysis of the public project ownership of an ongoing urban project in the Lyon first-ring suburbs: the Carré de Soie. Three main objectives are pursued: descriptive (reconstructing the scenario), analytical (assessing the nature of the play - fairy tale, tragedy or improvisation match), and prescriptive (drawing the moral of the story). The description of the public project ownership shows the successive deployment of four control strategies, whose implications on deadlines, project content (programs, morphologies), and public funding are significant. Building on the analysis, several recommendations can be made to allow the public sphere to control the process and ensure the urban project produces equity (most notably, anticipation and articulation of planning and real- estate strategy, as well as provision and maintenance of equipment and public spaces, funding of quality housing for a wide range of populations, etc.). More generally, a gap can be highlighted between those territories that are strategic to the development of the agglomeration and the limited resources of the municipalities involved. This deficit calls for strengthening the investment abilities of the intermunicipal structure.¦By itself, the real-estate market logic brings about social polarization and urban inequalities. Building an equitable city requires a strong will on the part of public authorities, a will that must be reflected both in the stated ambition - setting priorities of urban development equitably - and in its implementation managing urban public projects fairly.