Dice and data : a comic about statistics with a 95 percent chance of being one. 'Dados y datos : cómic hacia la estadística con probabilidad 0,95 de serlo'.

Resumen tomado parcialmente de la propia publicación

The outcome in Australian children with hyperinsulinism of infancy: early extensive surgery in severe cases lowers risk of diabetes

AIMS Hyperinsulinism of infancy (HI) is characterized by unregulated insulin secretion in the presence of hypoglycaemia, often resulting in brain damage. Pancreatic resection for control of hypoglycaemia is frequently resisted because of the risk of diabetes mellitus (DM). We investigated retrospectively 62 children with HI from nine Australian treatment centres born between 1972 and 1998, comparing endocrine and neurological outcome in 28 patients receiving medical therapy alone with 34 who required pancreatic resection to control their hypoglycaemia. METHODS History, treatment and clinical course were ascertained from file audit and interview. Risk of DM (hazard ratio) attributable to age at surgery (< vs. greater than or equal to 100 days at last pancreatectomy) and extent of resection (< vs. greater than or equal to 95%) were calculated using Cox proportional hazards regression and categorical variables compared by the chi(2) -test. Neurological outcome (normal, mild deficit or severe deficit) was derived from the most authoritative source. RESULTS Surgically treated patients had a greater birthweight, earlier presentation and higher plasma insulin levels. Of 18 infants < 100 days and 16 greater than or equal to 100 days of age at surgery, four (all greater than or equal to 100 days) became diabetic as an immediate consequence of surgery and five (two < 100 days and three greater than or equal to 100 days) became diabetic 7-18 years later. Surgery greater than or equal to 100 days and pancreatectomy greater than or equal to 95% were associated with development of diabetes (HR = 12.61, CI 1.53-104.07 and HR = 7.03, CI 1.43-34.58, respectively). Neurodevelopmental outcome was no different between the surgical and medical groups with 44% overall with neurological deficits. Patients euglycaemic within 35 days of the first symptom of hypoglycaemia (Group A) had a better neurodevelopmental outcome than those still hypoglycaemic > 35 days from first presentation (Group B) (P = 0.007). Prolonged hypoglycaemia in Group B was due either to delayed diagnosis or to need for repeat surgery because of continued hypoglycaemia. Within Group A, medically treated patients (who presented later with apparently milder disease) had a higher incidence of neurodevelopmental deficit (n = 15, four mild, three severe deficit) compared with surgically treated patients (n = 18, two mild, none severe deficit) (P < 0.025). CONCLUSIONS Poor neurodevelopmental outcome remains a major problem in hyperinsulinism of infancy. Risk of diabetes mellitus with pancreatectomy varies according to age at surgery and extent of resection. Patients presenting early with severe disease have a better neurodevelopmental outcome and lower risk of diabetes if they are treated with early extensive surgery.

Heavy vehicle suspensions : testing and analysis

Transport regulators consider that, with respect to pavement damage, heavy vehicles (HVs) are the riskiest vehicles on the road network. That HV suspension design contributes to road and bridge damage has been recognised for some decades. This thesis deals with some aspects of HV suspension characteristics, particularly (but not exclusively) air suspensions. This is in the areas of developing low-cost in-service heavy vehicle (HV) suspension testing, the effects of larger-than-industry-standard longitudinal air lines and the characteristics of on-board mass (OBM) systems for HVs. All these areas, whilst seemingly disparate, seek to inform the management of HVs, reduce of their impact on the network asset and/or provide a measurement mechanism for worn HV suspensions. A number of project management groups at the State and National level in Australia have been, and will be, presented with the results of the project that resulted in this thesis. This should serve to inform their activities applicable to this research. A number of HVs were tested for various characteristics. These tests were used to form a number of conclusions about HV suspension behaviours. Wheel forces from road test data were analysed. A “novel roughness” measure was developed and applied to the road test data to determine dynamic load sharing, amongst other research outcomes. Further, it was proposed that this approach could inform future development of pavement models incorporating roughness and peak wheel forces. Left/right variations in wheel forces and wheel force variations for different speeds were also presented. This led on to some conclusions regarding suspension and wheel force frequencies, their transmission to the pavement and repetitive wheel loads in the spatial domain. An improved method of determining dynamic load sharing was developed and presented. It used the correlation coefficient between two elements of a HV to determine dynamic load sharing. This was validated against a mature dynamic loadsharing metric, the dynamic load sharing coefficient (de Pont, 1997). This was the first time that the technique of measuring correlation between elements on a HV has been used for a test case vs. a control case for two different sized air lines. That dynamic load sharing was improved at the air springs was shown for the test case of the large longitudinal air lines. The statistically significant improvement in dynamic load sharing at the air springs from larger longitudinal air lines varied from approximately 30 percent to 80 percent. Dynamic load sharing at the wheels was improved only for low air line flow events for the test case of larger longitudinal air lines. Statistically significant improvements to some suspension metrics across the range of test speeds and “novel roughness” values were evident from the use of larger longitudinal air lines, but these were not uniform. Of note were improvements to suspension metrics involving peak dynamic forces ranging from below the error margin to approximately 24 percent. Abstract models of HV suspensions were developed from the results of some of the tests. Those models were used to propose further development of, and future directions of research into, further gains in HV dynamic load sharing. This was from alterations to currently available damping characteristics combined with implementation of large longitudinal air lines. In-service testing of HV suspensions was found to be possible within a documented range from below the error margin to an error of approximately 16 percent. These results were in comparison with either the manufacturer’s certified data or test results replicating the Australian standard for “road-friendly” HV suspensions, Vehicle Standards Bulletin 11. OBM accuracy testing and development of tamper evidence from OBM data were detailed for over 2000 individual data points across twelve test and control OBM systems from eight suppliers installed on eleven HVs. The results indicated that 95 percent of contemporary OBM systems available in Australia are accurate to +/- 500 kg. The total variation in OBM linearity, after three outliers in the data were removed, was 0.5 percent. A tamper indicator and other OBM metrics that could be used by jurisdictions to determine tamper events were developed and documented. That OBM systems could be used as one vector for in-service testing of HV suspensions was one of a number of synergies between the seemingly disparate streams of this project.

Factors potentiating the risk of sudden infant death syndrome associated with the prone position

Background. In several studies the sudden infant death syndrome (SIDS) has been significantly associated with sleeping in the prone position. It is not known how the prone position increases the risk of SIDS. Methods. We analyzed data from a case-control study (58 infants with SIDS and 120 control infants) and a prospective cohort study (22 infants with SIDS and 213 control infants) in Tasmania. Interactions were examined in matched analyses with a multiplicative model of interaction. Results. In the case-control study, SIDS was significantly associated with sleeping in the prone position, as compared with other positions (unadjusted odds ratio, 4.5; 95 percent confidence interval, 2.1 to 9.6). The strength of this association was increased among infants who slept on natural-fiber mattresses (P = 0.05), infants who were swaddled (P = 0.09), infants who slept in heated rooms (P = 0.006), and infants who had had a recent illness (P = 0.02). These variables had no significant effect on infants who did not sleep in the prone position. A history of recent illness was significantly associated with SIDS among infants who slept prone (odds ratio, 5.7; 95 percent confidence interval, 1.8 to 19) but not among infants who slept in other positions (odds ratio, 0.83). In the cohort study, the risk of SIDS was greater among infants who slept prone on natural-fiber mattresses (odds ratio, 6.6; 95 percent confidence interval, 1.3 to 33) than among infants who slept prone on other types of mattresses (odds ratio, 1.8). Conclusions. When infants sleep prone, the elevated risk of SIDS is increased by each of four factors: the use of natural-fiber mattresses, swaddling, recent illness, and the use of heating in bedrooms.

Damage assessment of structures with uncertainty by using mode-shape curvatures and fuzzy logic

Uncertainties associated with the structural model and measured vibration data may lead to unreliable damage detection. In this paper, we show that geometric and measurement uncertainty cause considerable problem in damage assessment which can be alleviated by using a fuzzy logic-based approach for damage detection. Curvature damage factor (CDF) of a tapered cantilever beam are used as damage indicators. Monte Carlo simulation (MCS) is used to study the changes in the damage indicator due to uncertainty in the geometric properties of the beam. Variation in these CDF measures due to randomness in structural parameter, further contaminated with measurement noise, are used for developing and testing a fuzzy logic system (FLS). Results show that the method correctly identifies both single and multiple damages in the structure. For example, the FLS detects damage with an average accuracy of about 95 percent in a beam having geometric uncertainty of 1 percent COV and measurement noise of 10 percent in single damage scenario. For multiple damage case, the FLS identifies damages in the beam with an average accuracy of about 94 percent in the presence of above mentioned uncertainties. The paper brings together the disparate areas of probabilistic analysis and fuzzy logic to address uncertainty in structural damage detection.

National Marine Fisheries Service Habitat Conservation Efforts in the Southeastern United States for 1988

Dataq uantifying the area of habitat affected by Federal programs that regulate development in coastal zones of the southeastern United States are provided for 1988. The National Marine Fisheries Service (NMFS) made recommendations on 3,935 proposals requiring Federal permits or licenses to alter wetlands. A survey of 977 of these activities revealed that 359,876 acres of wetlands that support fishery resources under NMFS purview were proposed for some type of alteration or manipulation. Almost 95 percent of this acreage was for impounding andl/or manipulation of water levels in Louisiana marshes. The NMFS did not object to alteration of 173,284 acres and recommended the conservation of 186,592 acres. To offset habitat losses, 1,827 acres of mitigation were recommended by the NMFS or proposed by applicants and/or the Corps of Engineers (COE). From 1981 to 1988 the NMFS has provided in depth analyses on 8,385 projects proposing the alteration of at least 656,377 acres of wetlands. A follow-up survey on the disposition of 339 permits handled by the COE during 1988 revealed that the COE accepted NMFS recommendations on 68 percent. On a permit-by-permit basis, 13 percent of NMFS recommendations were partially accepted, 17 percent were completely rejected, and 2 percent were withdrawn. The permit requests tracked by the NMFS proposed the alteration of 2,674 acres of wetlands. The COE issued permits to alter 847 acres or 32 percent of the amount proposed.

Microwave curing of thermosetting polymer materials in microelectronics applications

Thermosetting polymer materials are widely utilised in modern microelectronics packaging technology. These materials are used for a number of functions, such as for device bonding, for structural support applications and for physical protection of semiconductor dies. Typically, convection heating systems are used to raise the temperature of the materials to expedite the polymerisation process. The convection cure process has a number of drawbacks including process durations generally in excess of 1 hour and the requirement to heat the entire printed circuit board assembly, inducing thermomechanical stresses which effect device reliability. Microwave energy is able to raise the temperature of materials in a rapid, controlled manner. As the microwave energy penetrates into the polymer materials, the heating can be considered volumetric – i.e. the rate of heating is approximately constant throughout the material. This enables a maximal heating rate far greater than is available with convection oven systems which only raise the surface temperature of the polymer material and rely on thermal conductivity to transfer heat energy into the bulk. The high heating rate, combined with the ability to vary the operating power of the microwave system, enables the extremely rapid cure processes. Microwave curing of a commercially available encapsulation material has been studied experimentally and through use of numerical modelling techniques. The material assessed is Henkel EO-1080, a single component thermosetting epoxy. The producer has suggested three typical convection oven cure options for EO1080: 20 min at 150C or 90 min at 140C or 120 min at 110C. Rapid curing of materials of this type using advanced microwave systems, such as the FAMOBS system [1], is of great interest to microelectronics system manufacturers as it has the potential to reduce manufacturing costs, increase device reliability and enables new device designs. Experimental analysis has demonstrated that, in a realistic chip-on-board encapsulation scenario, the polymer material can be fully cured in approximately one minute. This corresponds to a reduction in cure time of approximately 95 percent relative to the convection oven process. Numerical assessment of the process [2] also suggests that cure times of approximately 70 seconds are feasible whilst indicating that the decrease in process duration comes at the expense of variation in degree of cure within the polymer.

The cost-effectiveness of the SPHERE intervention for the secondary prevention of coronary heart disease

Objectives: The Secondary Prevention of Heart disEase in geneRal practicE (SPHERE) trial has recently reported. This study examines the cost-effectiveness of the SPHERE intervention in both healthcare systems on the island of Ireland. Methods: Incremental cost-effectiveness analysis. A probabilistic model was developed to combine within-trial and beyond-trial impacts of treatment to estimate the lifetime costs and benefits of two secondary prevention strategies: Intervention - tailored practice and patient care plans; and Control - standardized usual care. Results: The intervention strategy resulted in mean cost savings per patient of 512.77 (95 percent confidence interval [CI], 1086.46-91.98) and an increase in mean quality-adjusted life-years (QALYs) per patient of 0.0051 (95 percent CI, 0.0101-0.0200), when compared with the control strategy. The probability of the intervention being cost-effective was 94 percent if decision makers are willing to pay €45,000 per additional QALY. Conclusions: Decision makers in both settings must determine whether the level of evidence presented is sufficient to justify the adoption of the SPHERE intervention in clinical practice. Copyright © Cambridge University Press 2010.

Cost-effectiveness of a preventive counseling and support package for postnatal depression

Objectives: This study reports the cost-effectiveness of a preventive intervention, consisting of counseling and specific support for the mother-infant relationship, targeted at women at high risk of developing postnatal depression. Methods: A prospective economic evaluation was conducted alongside a pragmatic randomized controlled trial in which women considered at high risk of developing postnatal depression were allocated randomly to the preventive intervention (n = 74) or to routine primary care (n = 77). The primary outcome measure was the duration of postnatal depression experienced during the first 18 months postpartum. Data on health and social care use by women and their infants up to 18 months postpartum were collected, using a combination of prospective diaries and face-to-face interviews, and then were combined with unit costs ( pound, year 2000 prices) to obtain a net cost per mother-infant dyad. The nonparametric bootstrap method was used to present cost-effectiveness acceptability curves and net benefit statistics at alternative willingness to pay thresholds held by decision makers for preventing 1 month of postnatal depression. Results: Women in the preventive intervention group were depressed for an average of 2.21 months (9.57 weeks) during the study period, whereas women in the routine primary care group were depressed for an average of 2.70 months (11.71 weeks). The mean health and social care costs were estimated at 2,396.9 pound per mother-infant dyad in the preventive intervention group and 2,277.5 pound per mother-infant dyad in the routine primary care group, providing a mean cost difference of 119.5 pound (bootstrap 95 percent confidence interval [Cl], -535.4, 784.9). At a willingness to pay threshold of 1,000 pound per month of postnatal depression avoided, the probability that the preventive intervention is cost-effective is .71 and the mean net benefit is 383.4 pound (bootstrap 95 percent Cl, -863.3- pound 1,581.5) pound. Conclusions: The preventive intervention is likely to be cost-effective even at relatively low willingness to pay thresholds for preventing 1 month of postnatal depression during the first 18 months postpartum. Given the negative impact of postnatal depression on later child development, further research is required that investigates the longer-term cost-effectiveness of the preventive intervention in high risk women.

Multinational subsidiary sales and performance in South East Asia

We extend the theory of the multinational enterprise (MNE) by exploring the concept of subsidiary-specific advantages (SSAs) as a driver for subsidiary performance. We investigate the relationship of host country-specific advantages (host CSAs) in the form of market attractiveness, SSAs and subsidiary sales as they affect subsidiary performance. From an original primary dataset of 101 British multinational (MNE) subsidiaries in six South East Asian countries, our analysis reveals three significant findings. First, host market attractiveness has a statistically positive impact on the performance of subsidiaries. Second, the three traditional SSAs of general management, marketing capabilities and invested capital enhance subsidiary performance. Third, we examine geographic direction and types of customers for subsidiary sales by following international accounting standards. We find that these subsidiaries generate on average 95 percent of total sales from the Asia Pacific region and 91 percent of total sales from external customers. Our findings have important research and managerial implications.

Recurrent sores by ill-fitting dentures and intra-oral squamous cell carcinoma in smokers

Objectives: To examine whether denture use and recurrent sores caused by ill-fitting dentures are associated with intra-oral squamous cell carcinoma (IO-SCC) in individuals exposed to tobacco. Methods: We conducted a hospital-based case-control study. The study population comprised 124 patients with IO-SCC and the same number of controls (individually paired according to gender and age) recruited from outpatient units of the same hospital. Conditional logistic regression analysis assessed the effect of denture use and recurrent oral sores by ill-fitting dentures, adjusted by covariates on the lifetime exposure to alcohol and tobacco, socioeconomic standings, and dietary patterns. Results: The use of dentures showed no association with IO-SCC [adjusted odds ratio (OR) 1.40, 95 percent confidence interval 0.51-3.87, P = 0.513] in an assessment controlled by socioeconomic position, lifetime exposure to alcohol and tobacco, and dietary patterns. However, the report of recurrent sores caused by ill-fitting dentures showed significant association with the disease (adjusted OR 4.58, 95 percent confidence interval 1.52-13.76, P = 0.007). Conclusions: The association between recurrent oral sores caused by ill-fitting dentures and squamous cell carcinoma of the mouth in smokers is in agreement with the hypothesis that the chronic physical irritation of oral mucosa contributes to the topical carcinogenic effect of tobacco, which must be taken into careful consideration in the planning of dental services for adults and the elderly.

Self-reported racism and experience of toothache among pregnant Aboriginal Australians: the role of perceived stress, sense of control, and social support

Objectives We hypothesized that the psychosocial factors perceived stress and sense of personal control mediated the relationship between self-reported racism and experience of toothache. We hypothesized that social support moderated this relationship. Methods Data from 365 pregnant Aboriginal Australian women were used to evaluate experience of toothache, socio-demographic factors, psychosocial factors, general health, risk behaviors, and self-reported racism exposure. Hierarchical logistic regression models estimated odds ratios (ORs) and 95 percent confidence intervals (CIs) for experience of toothache. Perceived stress and sense of personal control were examined as mediators of the association between self-reported racism and experience of toothache. Social support was examined as a moderator. Results Self-reported racism persisted as a risk indicator for experience of toothache (OR 1.99, 95 percent CI 1.07-3.72) after controlling for age, level of education, and difficulty paying a $100 dental bill. The relationship between self-reported racism and experience of toothache was mediated by sense of control. The direct effect of self-reported racism on experience of toothache became only marginally significant, and the indirect effect was significant (β coefficient-=-0.04, bias-corrected 95 percent CI 0.004-0.105, 21.2 percent of effect mediated). Stress was insignificant as a mediator. Social support was insignificant as a moderator. Conclusions The findings indicate that high levels of self-reported racism were associated with experience of toothache and that sense of control, but not perceived stress, mediated the association between self-reported racism and experience of toothache among this sample of pregnant Aboriginal Australian women. Social support did not moderate the association between self-reported racism and experience of toothache.

Infant formula and enamel fluorosis A systematic review

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Brazilian dental students' intentions and motivations towards their professional career

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da fragmentação no metabolismo energético e nível trófico em duas espécies de morcegos frugívoros, Artibeus lituratus e Carollia perspicillata (Chiroptera: Phyllostomidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)