Sperimentazione con una libreria per la decodifica di bar code in immagini

In questa tesi viene studiata la libreria zbar.h il cui compito è decodificare i barcode presenti in immagini. Per acquisire le immagini si utilizzano funzioni contenute nella libreria OpenCV. Successivamente viene creata un'interfaccia tra OpenCV e ZBar. Vengono effettuati alcuni test per verificare l'efficienza sia di ZBar e sia dell'interfaccia. Concludendo, si crea una nuova libreria in cui sono inglobate le funzioni di ZBar e l'interfaccia OpenCV-ZBar

Low-dimensional, hinged bar-code metal oxide layers and free-standing, ordered organic nanostructures from turbostratic vanadium oxide

Both low-dimensional bar-coded metal oxide layers, which exhibit molecular hinging, and free-standing organic nanostructures can be obtained from unique nanofibers of vanadium oxide (VOx). The nanofibers are successfully synthesized by a simple chemical route using an ethanolic solution of vanadium pentoxide xerogel and dodecanethiol resulting in a double bilayered laminar turbostratic structure. The formation of vanadium oxide nanofibers is observed after hydrothermal treatment of the thiol-intercalated xerogel, resulting in typical lengths in the range 2–6 µm and widths of about 50–500 nm. We observe concomitant hinging of the flexible nanofiber lamina at periodic hinge points in the final product on both the nanoscale and molecular level. Bar-coded nanofibers comprise alternating segments of organic–inorganic (thiols–VOx) material and are amenable to segmented, localized metal nanoparticle docking. Under certain conditions free-standing bilayered organic nanostructures are realized.

Input-state-output representations of concatenated 2D convolutional codes

In this paper we investigate a novel model of concatenation of a pair of two-dimensional (2D) convolutional codes. We consider finite-support 2D convolutional codes and choose the so-called Fornasini-Marchesini input-state-output (ISO) model to represent these codes. More concretely, we interconnect in series two ISO representations of two 2D convolutional codes and derive the ISO representation of the ob- tained 2D convolutional code. We provide necessary condition for this representation to be minimal. Moreover, structural properties of modal reachability and modal observability of the resulting 2D convolutional codes are investigated.

Encoding combinatorial libraries: A novel application of fluorescent silica colloids

A major challenge associated with using large chemical libraries synthesized on microscopic solid support beads is the rapid discrimination of individual compounds in these libraries. This challenge can be overcome by encoding the beads with 1 mum silica colloidal particles (reporters) that contain specific and identifiable combinations of fluorescent byes. The colored bar code generated on support beads during combinatorial library synthesis can be easily, rapidly, and inexpensively decoded through the use of fluorescence microscopy. All reporters are precoated with polyelectrolytes [poly(acrylic acid), PAA, poly(sodium 4-styrenesulfonate PSSS, polyethylenimine, PEI, and/or poly(diallyldimethylammonium chloride), PDADMAC] with the aim of enhancing surface charge, promoting electrostatic attraction to the bead, and facilitating polymer bridging between the bead and reporter for permanent adhesion. As shown in this article, reporters coated with polyelectrolytes clearly outperform uncoated reporters with regard to quantity of attached reporters per bead (54 +/- 23 in 2500 mum(2) area for PEI/PAA coated and 11 +/- 6 for uncoated reporters) and minimization of cross-contamination (1 red reporter in 2500 mum(2) area of green-labeled bead for PEI/PAA coated and 26 +/- 15 red reporters on green-labeled beads for uncoated reporters after 10 days). Examination of various polyelectrolyte systems shows that the magnitude of the xi -potential of polyelectrolyte-coated reporters (-64 mV for PDADMAC/PSSS and -42 mV for PEI/PAA-coated reporters) has no correlation with the number of reporters that adhere to the solid support beads (21 +/- 16 in 2500 mum(2) area for PDADMAC/PSSS and 54 +/- 23 for PEI/PAA-coated reporters). The contribution of polymer bridging to the adhesion has a far greater influence than electrostatic attraction and is demonstrated by modification of the polyelectrolyte multilayers using gamma irradiation of precoated reporters either in aqueous solution or in polyelectrolyte solution.

Multi-fluorescent silica colloids for encoding large combinatorial libraries

Large chemical libraries can be synthesized on solid-support beads by the combinatorial split-and-mix method. A major challenge associated with this type of library synthesis is distinguishing between the beads and their attached compounds. A new method of encoding these solid-support beads, 'colloidal bar-coding', involves attaching fluorescent silica colloids ('reporters') to the beads as they pass through the compound synthesis, thereby creating a fluorescent bar code on each bead. In order to obtain sufficient reporter varieties to bar code extremely large libraries, many of the reporters must contain multiple fluorescent dyes. We describe here the synthesis and spectroscopic analysis of various mono- and multi-fluorescent silica particles for this purpose. It was found that by increasing the amount of a single dye introduced into the particle reaction mixture, mono- fluorescent silica particles of increasing intensities could be prepared. This increase was highly reproducible and was observed for six different fluorescent dyes. Multi-fluorescent silica particles containing up to six fluorescent dyes were also prepared. The resultant emission intensity of each dye in the multi-fluorescent particles was found to be dependent upon a number of factors; the hydrolysis rate of each silane-dye conjugate, the magnitude of the inherent emission intensity of each dye within the silica matrix, and energy transfer effects between dyes. We show that by varying the relative concentration of each silane-dye conjugate in the synthesis of multi-fluorescent particles, it is possible to change and optimize the resultant emission intensity of each dye to enable viewing in a fluorescence detection instrument.

Sistema de expedição automática em SAP: implementação logística na Gopaca

Este documento apresenta o desenvolvimento de um sistema que visa relacionar e interligar as tecnologias móveis, automação industrial e SAP às necessidades da Gopaca, uma empresa de produção de derivados de cartão. A empresa Gopaca demonstrou interesse e necessidade em melhorar os seus processos internos de maneira a aumentar produtividade, diminuir desperdícios e implementar uma filosofia de Lean Manufacturing. Para que isso fosse possível foram implementados novos processos em SAP de modo a automatizar todo o processo pré-produtivo, pós produtivo e expedicional, bem como implementado um sistema de Warehouse Management inovador a nível mundial no que a empresas de produção de cartão diz respeito. Sendo expectável que após a conclusão do projecto os resultados fossem inegáveis em termos de aplicação da metodologia Lean Manufacturing. Foram efectuadas melhorias na forma como a entrada de mercadoria e produção é feita em SAP, passando de completamente manual para completamente automática, até à forma como a expedição será feita, apenas necessitando de um operador com uma pistola de leitura de códigos de barra para despoletar o processo completo até ao momento de impressão da guia de transporte. Todo este processo é inovador no que diz respeito à sua implementação em SAP com o foco no desejo do cliente, não existindo ainda, nenhum produto (modulo SAP) no mercado que permita a execução automática dos processos indicados. Todos os processos se tornaram simples e intuitivos e na maior parte dos casos sem qualquer necessidade de interacção com o utilizador, reduzindo o tempo anteriormente despendido nesta operações, podendo este ser aplicado nas áreas onde é realmente necessário.

Desenvolvimento de uma nova unidade fabril da Efacec

No âmbito da Unidade Curricular Dissertação, inserida no segundo ano do Mestrado em Engenharia Mecânica – Gestão Industrial do Instituto Superior de Engenharia do Porto, foi proposto um projecto que está a ser desenvolvido pela equipa de Engenharia e Gestão Industrial, da unidade de negócios AMT, intitulado por: “Projecto Índia – Desenvolvimento da nova unidade fabril” Este projecto tem como principal objectivo o desenvolvimento de uma fábrica de excelência na Índia de fabricação de componentes de média tensão, isto é, com processos logísticos bem definidos e com linhas de produção o mais automatizadas possivel. Esta nova fábrica de raiz, vai ser gerida e decalcada do modelo atualmente existe na fábrica da EFACEC de componentes de média tensão existente em Portugal. Numa primeira fase do desenvolvimento do projecto, foi seleccionado um edifício com cerca de 1600m2 em Nashik, uma localidade a cerca de 171 Km de Mumbai, onde se encontram 80% dos fornecedores da EFACEC. Foram identificados os produtos a serem fabricados e quantificada a respectiva procura anual. Foi efectuado o balanceamento de cada uma das linhas e desenhado o layout. Neste layout contemplou-se as áreas de produção, laboratório, gabinetes de chefes de equipa, expedição, recepção e armazém. Após a definição das áreas de montagem de cada produto, iniciou-se a concepção das linhas de produção, sobretudo automáticas, com a definição da cadência de produção. A linha de fabricação que é especialmente detalhada neste documento é a linha de montagem dos comandos CI. Este é o produto com mais procura. Foi também definido o processo logístico do fluxo interno da fábrica. Nas linhas de produção foi implementado o sistema de controlo de fluxo baseado em cartões Kanban e no armazém criou-se um novo conceito de controlo e localização de produtos, o “Aquiles”. O Aquiles permite automaticamente e através da leitura de código de barras, indexar os artigos nas estantes. Cada artigo e cada estante e/ou localização estão codificados e no momento de recepção de material o código do artigo é associado ao código da estante. No âmbito de explorar todas as soluções possíveis para a um melhor desenvolvimento desta nova fábrica foram abordados temas como “JIT”, “Pull Flow”, “Kanban”, “Takttime”.

DOI: The "Big Brother" in the dissemination of scientific documentation

Rapid growth in the availability and use of digital documents has prompted the development of instruments to handle them. A most important example of these instruments are digital identifiers, which provide a codification system that allows digital items, usually up to the level of a computer file, to be singled out and located. Digital identifiers make up standardized global systems applied to specific products or areas. They are part of the very many identifiers developed to handle large numbers of items and large amounts of information for transactional purposes, which often have a global span. Digital identifiers include the ubiquitous Global Trade Item Number (GTIN), a code that unequivocally identifies trade items all around the world. The GTIN can take on several configurations depending on its application. These include: EAN-13, EAN-8, EAN-14, and UCC-12. EAN-13 is the code used for retail products in order to facilitate trade at the point of sale; its widely known symbol or graphical form is the EAN/UPC-13 bar code...

Varastoinnin kehittäminen eräässä huolintaliikkeessä

Tässä työssä kuvataan Saimaa Linesin varastointiin ja työturvallisuuteen liittyviä ongelmia sekä esitetään ehdotuksia niin varastoinnin tehostamiseksi kuin työturvallisuuden parantamiseksi. Saimaa Lines on lappeenrantalainen huolintaliike, jonka asiakkaat sijaitsevat pääasiassa entisen Neuvostoliiton alueella. Varastolla on lastausongelmia ja työturvallisuus on puutteellisesti hoidettu. Aluksi työssä tutkitaan ja vertaillaan viivakoodi- sekä RFID-järjestelmiä. Vertailujen pohjalta valitaan järjestelmistä toinen ja selvitetään, kuinka järjestelmä parantaisi varastointia Saimaa Linesilla sekä selvitetään käyttöönottokustannukset. Omana osionaan tarkastellaan työturvallisuutta ensin teoreettiselta pohjalta ja sen jälkeen esitellään tulokset Saimaa Linesille tehdystä Turvallisuuskympistä. Osion lopussa esitetään ehdotuksia turvallisuuden parantamiseksi.

Modelización bajo el enfoque de dinámica de sistemas de una cadena de abastecimiento para la industria vitivinícola

El proyecto de tesis denominado “Modelización bajo el enfoque de dinámica de sistemas de una cadena de abastecimiento para la industria vitivinícola” busca construir un modelo que aporte una solución óptima al problema logístico encontrado en la cadena de suministro, para que empresas nacionales o internacionales que tengan un funcionamiento similar al del sistema estudiado, puedan tomarlo como ejemplo o referencia. Así mismo, esta investigación pretende encontrar los problemas más frecuentes en cadenas de este tipo con el fin de construir un marco conceptual y teórico fundamentado en la Teoría General de Sistemas (TGS) que genere finalmente un modelo basado en la dinámica de sistemas el cual permitirá a las empresas diseñar y comparar las diferentes intervenciones derivadas del modelo que propicien la generación de capacidades dirigidas al logro de la competitividad de forma perdurable.

Assessment of informatization for the dispensing of medications at a university hospital

INTRODUCTION: Informatics and automation are important tools for the reduction of work, errors and costs in a hospital pharmacy. OBJECTIVES: To describe the structuring and function of an informatized system for the dispensing of medications and to assess its effect on nursing and pharmacy services during the period from 1997 to 2003. MATERIALS and METHODS: In this descriptive and retrospective study, we performed an analysis of documents addressing the structuring and implementation of the informatized medication dispensing system. In addition, we analyzed the perceptions of nurses, pharmacists and pharmacy assistants who participated in the structuring phase of the system when interviewed about the effect of informatization on administrative aspects (e.g., requisition of medications, presentation of the dispensed medication and system operationalization). RESULTS: The major advantages provided by the new system were 1) the elimination of manual transcripts for prescribed medications, 2) increased speed, 3) better identification of the doses prescribed by physicians, 4) medication labels containing all necessary identification and 5) practicality and safety of optical bar code-based verification of the requested and dispensed medications. CONCLUSIONS: The great majority of the interviewees considered the informatized medication supply system to be of good quality. Analysis of the data provided information that could contribute to the expansion and refinement of the system, provide support for studies regarding the utilization of medications and offer new perspectives for work and productivity.

Explorando vertentes matemáticas nos códigos de barras

Pós-graduação em Matemática em Rede Nacional - IBILCE

„RFID - Systematische Versuche für den zuverlässigen Einsatz in der Logistik“

Mit zunehmender Komplexität und Vielfalt der Logistikprozesse steigt der Stellenwert der eingesetzten Informationstechnologien. Die den Warenfluss begleitenden bzw. vorhereilenden Informationen sind erforderlich, um Waren identifizieren und Unternehmensressourcen optimal einsetzen zu können. Als Beispiel ist der klassische Wareneingang zu nennen. Durch die Avisierung von Menge und Art eingehender Waren können der Einsatz des Personals zur Entladung und Vereinnahmung sowie die erforderlichen Ressourcen (Ladehilfsmittel, Flurförderzeuge, usw.) im Vorfeld geplant und bereitgestellt werden. Der Informationsfluss ist demnach als Qualitätsmerkmal und als Wirtschaftlichkeitsfaktor zu verstehen. Die Schnittstelle zwischen dem physischen Warenfluss und dem Informationsfluss auf EDV-Basis bildet die Identifikationstechnologien. In der Industrie verbreitete Identifikationstechnologien bestehen in der Regel aus einem Datenträger und einem Erfassungsgerät. Der Datenträger ist am physischen Objekt fixiert. Das Erfassungsgerät liest die auf dem Datenträger befindlichen Objektinformationen und wandelt sie in einen Binär-Code um, der durch nachgelagerte EDV weiterverarbeitet wird. Die momentan in der Industrie und im Handel am häufigsten verwendete Identifikationstechnologie ist der Barcode. In den letzten Jahren tritt die RFID-Technologie in den Fokus der Industrie und des Handels im Bereich Materialfluss und Logistik. Unter „Radio Frequency IDentification“ wird die Kommunikation per Funkwellen zwischen Datenträger (Transponder) und Lesegerät verstanden. Mittels der RFID-Technologie ist der Anwender, im Gegensatz zum Barcode, in der Lage, Informationen auf dem Transponder ohne Sichtkontakt zu erfassen. Eine Ausrichtung der einzelnen Artikel ist nicht erforderlich. Zudem können auf bestimmten Transpondertypen weitaus größere Datenmengen als auf einem Barcode hinterlegt werden. Transponder mit hoher Speicherkapazität eignen sich in der Regel, um die auf ihnen hinterlegten Daten bei Bedarf aktualisieren zu k��nnen. Eine dezentrale Datenorganisation ist realisierbar. Ein weiterer Vorteil der RFID-Technologie ist die Möglichkeit, mehrere Datenträger im Bruchteil einer Sekunde zu erfassen. In diesem Fall spricht man von einer Pulkerfassung. Diese Eigenschaft ist besonders im Bereich Warenein- und -ausgang von Interesse. Durch RFID ist es möglich, Ladeeinheiten, z. B. Paletten mit Waren, durch einen Antennenbereich zu fördern, und die mit Transpondern versehenen Artikel zu identifizieren und in die EDV zu übertragen. Neben der Funktionalität einer solchen Technologie steht in der Industrie vor allem die Wirtschaftlichkeit im Vordergrund. Transponder sind heute teuerer als Barcodes. Zudem müssen Investitionen in die für den Betrieb von RFID erforderliche Hard- und Software einkalkuliert werden. Daher muss der Einsatz der RFID-Technologie Einsparungen durch die Reorganisation der Unternehmensprozesse nach sich ziehen. Ein Schwachpunkt der RFID-Technologie ist momentan je nach Anwendung die mangelnde Zuverlässigkeit und Wiederholgenauigkeit bei Pulklesungen. Die Industrie und der Handel brauchen Identifikationstechnologien, deren Erfassungsrate im Bereich nahe 100 % liegt. Die Gefahr besteht darin, dass durch ein unzuverlässiges RFID-System unvollständige bzw. fehlerhafte Datensätze erzeugt werden können. Die Korrektur der Daten kann teurer sein als die durch die Reorganisation der Prozesse mittels RFID erzielten Einsparungen. Die Erfassungsrate der Transponder bei Pulkerfassungen wird durch mehrere Faktoren beeinflusst, die im Folgenden detailliert dargestellt werden. Das Institut für Fördertechnik und Logistik (IFT) in Stuttgart untersucht m��gliche Einflussgrößen auf die Erkennungsraten bei Pulkerfassungen. Mit den gewonnenen Erkenntnissen sollen mögliche Schwachstellen bei der Erkennung mehrerer Transponder im Vorfeld einer Implementierung in die Logistikprozesse eines Unternehmens eliminiert werden. With increasing complexity and variety of the logistics processes the significance of the used information technologies increases. The information accompanying the material flow is necessary in order to be able to identify goods and to be able to use corporate resources optimally. The classical goods entrance is to be mentioned as an example. The notification of amount and kind of incoming goods can be used for previously planning and providing of the personnel and necessary resources. The flow of information is to be understood accordingly as a high-quality feature and as an economic efficiency factor. With increasing complexity and variety of the logistics processes the significance of the used information technologies increases. The information accompanying the material flow is necessary in order to be able to identify goods and to be able to use corporate resources optimally. The classical goods entrance is to be mentioned as an example. The notification of amount and kind of incoming goods can be used for previously planning and providing of the personnel and necessary resources. The flow of information is to be understood accordingly as a high-quality feature and as an economic efficiency factor.

Einsatz von RFID in der Pharmazeutischen Industrie

Die Radio Frequenz Identifikation (RFID) gilt als wichtigste technologische Neuerung in der Informationslogistik. Wird RFID in der produzierenden Industrie hauptsächlich zur Betriebsdaten-erfassung und im Handel zur Wareneingangs-/ Warenausgangskontrolle verwendet, so können ins-besondere in der Pharmazeutischen Industrie die Vorteile der Technologie voll ausgereizt werden. Die wohl wichtigste Anwendung ist die lückenlose Rückverfolgung entlang der Lieferkette, wie sie in den USA bereits in einigen Staaten für alle pharmazeutischen Produkte vorgeschrieben und auch in Deutschland für bestimmte Produkte erforderlich ist. Zudem können die RFID Transponder auf der Produktver-packung als fälschungssicheres Merkmal eingesetzt werden. Bei temperatursensiblen Produkten können Transponder mit zusätzlicher Sensorik zur Überwachung der Kühlkette dienen. Gleichzeitig kann der Transponder auch als Diebstahlsicherung im innerbetrieblichen Bereich sowie auch im Handel dienen und ermöglicht dabei eine höhere Sicherheit als die bisher eingesetzten 1-Bit Transponder. Die Trans-pondertechnologie kann außerdem den Barcode ganz oder teilweise ersetzen und so einen großen Beitrag zur Prozessautomatisierung leisten.