Efeito do sistema de produção nas características físico-químicas e no perfil lipídico de três músculos de suínos alentejanos

O presente trabalho tem como objetivo testar o efeito do sistema de produção com dieta rica em ácido oleico nas características zootécnicas, de carcaça, físico-químicas e no perfil lipídico dos músculos Longissimus dorsi (LD), Biceps femoris (BF) e Semimembranosus (SM) de suínos de raça Alentejana. Foram utilizados 15 animais, divididos em dois grupos, o grupo IN (n=9) foi mantido em parques individuais abertos ao exterior com 3 m2 e o grupo OUT (n=6) foi mantido numa área de 3 ha com acesso a pastagem. O grupo OUT obteve melhores performances zootécnicas. O rendimento de carcaça foi igual para ambos os grupos, e o rendimento comercial e proporção de peças nobres foi superior nos OUT. Estes obtiveram menores teores de lípidos intramusculares mas maiores teores de PUFA (ácidos gordos polinsaturados) e melhores valores para os rácios PUFA/SFA (ácido gordos saturados) e n-6/n-3. O SM foi menos afetado pelo sistema de produção; Abstract: Effect of the rearing system in the physical-chemical characteristics and the lipid profile of three muscles from Alentejano pigs The present study aims to test the effect of rearing system with oleic acid rich diet on performance, carcass and physical-chemical characteristics, and lipid profile of the muscles Longissimus dorsi (LD), Biceps femoris (BF) and Semimembranosus (SM) from Alentejano pigs. The study used 15 animals, divided into two groups. The Group IN (n = 9) was kept in individual parks open to the exterior with 3 m2, and the OUT (n = 6) was held in an area of 3 ha with access to pasture. The OUT group obtained the best performances. The carcass yield was the same for both groups, meat yield and the proportion of noble parts was superior in the OUT. These obtained lower levels of intramuscular fat but larger PUFA levels (polyunsaturated fatty acids) and best values for the ratios PUFA/SFA (saturated fatty acids) and n-6/n-3. The SM was the least affected by the rearing system

Temperatura superficial de bovinos considerando áreas com e sem a presença de pelos.

Nos últimos anos um grande número de estudos utilizando a análise de imagens termográficas de animais na faixa do infravermelho vem sendo realizado. Além dos avanços tecnológicos que tornaram os sensores mais acessíveis, a preocupação com o bem estar e ambiência das instalações animais tem fomentado a utilização desse método não invasivo e de fácil execução. Neste trabalho foram utilizados 20 bovinos das raças Nelore e Pantaneiro. Após tricotomia de uma área sobre o músculo Longissimus dorsi próximo da 13ª costela, seguida de repouso por 24 horas, os animais foram avaliados por três dias consecutivos, seis vezes por dia. Foram aferidas as temperaturas em áreas com e sem pelos com uso de câmera termográfica. O experimento foi realizado em um Delineamento Inteiramente Casualizado (DIC), considerando o efeito de raça. As variáveis temperatura sem pelo (TSP) e a diferença de temperatura entre áreas com e sem pelo (DIF) não apresentaram efeito significativo para raça. Por outro lado, para a temperatura em áreas com pelos(TCP) o efeito de raça foi significativo, com os pantaneiros apresentando as maiores médias. Animais de ambas as raças encontravam-se em condições de conforto térmico durante o experimento. Os resultados mostram a necessidade de se olhar com cautela para trabalhos envolvendo imagens termográficas capturadas em superfícies recobertas por pelos em animais. Como as avaliações foram feitas na sombra e só houve diferença significativa entre áreas com pelos, é possível que as temperaturas registradas com termografia infra vermelha na superfície da pelagem dos animais representem, pelo menos em parte, características termofísicas dos pelos que as compõem (como a capacidade térmica, por exemplo), sendo tais temperaturas pouco representativas para a superfície do corpo dos indivíduos propriamente, como é comum se considerar.

Qualidade da carne de ovinos puros e cruzados criados no Semiárido Nordestino brasileiro.

Resumo: A procura por carne de qualidade tem proporcionado ao setor de ovinocultura a adoção por técnicas de produção que possam contribuir para disponibilizar ao mercado produtos que atendam as necessidades dos consumidores, que se tornam cada vez mais exigentes quanto à aquisição de produtos que possam trazer benefícios a saúde. Assim, objetivou-se determinar a qualidade da carne de ovinos puros e cruzados criados no semiárido Nordestino. Utilizaram-se 30 cordeiros machos e fêmeas, oriundos dos cruzamentos Morada Nova x Morada Nova, Rabo Largo x Morada Nova e Santa Inês x Morada Nova, alojados em baias e alimentados com dieta a base de capim Canarana, milho farelo de soja e calcário. Os animais foram abatidos com peso médio de 24 kg de peso vivo e as carcaças mantidas em câmara frigorífica a 4?C, por 24 horas. Após esse período, foi seccionado o músculo Longissimus dorsi que foi embalado, identificado e armazenado a 20?C. Foram determinados os atributos físicos de capacidade de retenção de água, perda de peso por cocção e força de cisalhamento; os atributos químicos como umidade, proteína, cinza, lipídios e colesterol; avaliações subjetivas da carcaça como cor, marmoreio, textura da carne, distribuição da gordura, espessura da gordura e área de olho de lombo; os sensoriais de dureza, suculência, sabor, aroma e aceitação global e o perfil de ácidos graxos. O delineamento utilizado foi em esquema fatorial 3x2 (três grupos genéticos e dois sexos) e as médias comparadas pelo teste de Duncan a 5%. Não houve diferença (p>0,05) entre os genótipos para a composição química da carne, exceto para a variável lipídio (p<0,05). Para as características subjetivas da carcaça o genótipo influenciou (p<0,05) nas variáveis cor, marmoreio e textura da carne. O genótipo promoveu efeito (p<0,05) para as características físicas de capacidade de retenção de água e perda de peso por cocção. Os atributos sensoriais não sofreram efeitos (p>0,05) dos genótipos avaliados. Os genótipos influenciaram (p<0,05) as concentrações dos ácidos graxos saturados, monoinsaturados e poli-insaturados assim como, nas relações ?3:?6 e AGM:AGS. O fator sexo influenciou (p<0,05) nas variáveis umidade, força de cisalhamento, dureza, ácidos graxos desejáveis e relação ?3:?6. O cruzamento entre raças nativas mostrou-se com potencial para a produção de carne de qualidade, a raça Morada Nova melhorou os atributos físico-químicos da carne e em seu perfil lipídico e, o fator sexo melhorou o atributo maciez dando destaque a carne das fêmeas. Abstract: The demand for quality meat products has given the sheep industry sector productions techniques that can contribute providing the market with products that supply the needs of consumers require, who are becoming more demanding as the acquisition of differentiated and bring health benefits. The objective was to evaluate the quality of the pure sheep meat and cross bred in the semiarid Northeast of Brazil. It was used 30 male lambs and female, that came from crosses Morada Nova x Morada Nova, Rabo Largo x Morada Nova and Santa Ines x Morada Nova, housed in pens and fed a diet of grass Canarana, corn soybean meal and limestone. The animals were slaughtered at average weight of 24 kg, live weight, and carcasses kept in refrigeration chamber at 4 ° C for 24 hours. After this period the Longissimus dorsi muscle was selected, packaged, labeled and stored at 20˚C. The physical attributes were determined such as water holding capacity, cooking weight loss and shear force; the chemical attributes such as moisture, protein, ash, lipids and cholesterol; Subjective evaluations such as color, marbling, meat texture, fat distribution, fat thickness and loin eye area; the hardness sensory, juiciness, flavor, aroma and global acceptance and fatty acid profile. The design was a 3x2 factorial arrangement (three genetic groups and two genders) and the measures compared by Duncan test at 5%. There was no difference (p> 0.05) between genotypes for the chemical composition of meat, except for the lipid variable (p <0.05). To the subjective characteristics of the carcass, the genotype influenced (p <0.05) in the variables color, marbling and meat texture. The genotype promoted significant effect (p <0.05) for the physical characteristics, water retention capacity and weight loss on cooking. The sensory attributes did not suffer significant effects (p> 0.05) of the evaluated genotypes. The genotypes influenced (p <0.05) in the concentrations of saturated fatty acids, monounsaturated and polyunsaturated as well as in the relations ω3: ω6 and AGM:AGS. The gender factor influenced (P <0.05) in the variables moisture, shear strength, hardness, desirable fatty acids and relation ω3: ω6. The cross between native breeds showed up with potential for quality meat production, the Morada Nova improved the physical and chemical attributes of the flesh and in their lipid profiles and sex factor improved softness attribute highlighting the meat of females.

Variation in myogenic differentiation 1 mRNA abundance is associated with beef tenderness in Nelore cattle.

The myogenic differentiation 1 gene (MYOD1) has a key role in skeletal muscle differentiation and composition through its regulation of the expression of several muscle-specific genes. We first used a general linear mixed model approach to evaluate the association of MYOD1 expression levels on individual beef tenderness phenotypes. MYOD1 mRNA levels measured by quantitative polymerase chain reactions in 136 Nelore steers were significantly associated (P ? 0.01) with Warner?Bratzler shear force, measured on the longissimus dorsi muscle after 7 and 14 days of beef aging. Transcript abundance for the muscle regulatory gene MYOD1 was lower in animals with more tender beef. We also performed a coexpression network analysis using whole transcriptome sequence data generated from 30 samples of longissimus muscle tissue to identify genes that are potentially regulated by MYOD1. The effect of MYOD1 gene expression on beef tenderness may emerge from its function as an activator of muscle-specific gene transcription such as for the serum response factor (C-fos serum response element-binding transcription factor) gene (SRF), which determines muscle tissue development, composition, growth and maturation.

Iron content affects lipogenic gene expression in the muscle of nelore beef cattle.

Iron (Fe) is an essential mineral for metabolism and plays a central role in a range of biochemical processes. Therefore, this study aimed to identify differentially expressed (DE) genes and metabolic pathways in Longissimus dorsi (LD) muscle from cattle with divergent iron content, as well as to investigate the likely role of these DE genes in biological processes underlying beef quality parameters. Samples for RNA extraction for sequencing and iron, copper, manganese, and zinc determination were collected from LD muscles at slaughter. Eight Nelore steers, with extreme genomic estimated breeding values for iron content (Fe-GEBV), were selected from a reference population of 373 animals. From the 49 annotated DE genes (FDR<0.05) found between the two groups, 18 were upregulated and 31 down-regulated for the animals in the low Fe-GEBV group. The functional enrichment analyses identified several biological processes, such as lipid transport and metabolism, and cell growth. Lipid metabolism was the main pathway observed in the analysis of metabolic and canonical signaling pathways for the genes identified as DE, including the genes FASN, FABP4, and THRSP, which are functional candidates for beef quality, suggesting reduced lipogenic activities with lower iron content. Our results indicate metabolic pathways that are partially influenced by iron, contributing to a better understanding of its participation in skeletal muscle physiology.

Mathematical modelling of muscle recruitment and function in the lumbar spine

Low back pain is an increasing problem in industrialised countries and although it is a major socio-economic problem in terms of medical costs and lost productivity, relatively little is known about the processes underlying the development of the condition. This is in part due to the complex interactions between bone, muscle, nerves and other soft tissues of the spine, and the fact that direct observation and/or measurement of the human spine is not possible using non-invasive techniques. Biomechanical models have been used extensively to estimate the forces and moments experienced by the spine. These models provide a means of estimating the internal parameters which can not be measured directly. However, application of most of the models currently available is restricted to tasks resembling those for which the model was designed due to the simplified representation of the anatomy. The aim of this research was to develop a biomechanical model to investigate the changes in forces and moments which are induced by muscle injury. In order to accurately simulate muscle injuries a detailed quasi-static three dimensional model representing the anatomy of the lumbar spine was developed. This model includes the nine major force generating muscles of the region (erector spinae, comprising the longissimus thoracis and iliocostalis lumborum; multifidus; quadratus lumborum; latissimus dorsi; transverse abdominis; internal oblique and external oblique), as well as the thoracolumbar fascia through which the transverse abdominis and parts of the internal oblique and latissimus dorsi muscles attach to the spine. The muscles included in the model have been represented using 170 muscle fascicles each having their own force generating characteristics and lines of action. Particular attention has been paid to ensuring the muscle lines of action are anatomically realistic, particularly for muscles which have broad attachments (e.g. internal and external obliques), muscles which attach to the spine via the thoracolumbar fascia (e.g. transverse abdominis), and muscles whose paths are altered by bony constraints such as the rib cage (e.g. iliocostalis lumborum pars thoracis and parts of the longissimus thoracis pars thoracis). In this endeavour, a separate sub-model which accounts for the shape of the torso by modelling it as a series of ellipses has been developed to model the lines of action of the oblique muscles. Likewise, a separate sub-model of the thoracolumbar fascia has also been developed which accounts for the middle and posterior layers of the fascia, and ensures that the line of action of the posterior layer is related to the size and shape of the erector spinae muscle. Published muscle activation data are used to enable the model to predict the maximum forces and moments that may be generated by the muscles. These predictions are validated against published experimental studies reporting maximum isometric moments for a variety of exertions. The model performs well for fiexion, extension and lateral bend exertions, but underpredicts the axial twist moments that may be developed. This discrepancy is most likely the result of differences between the experimental methodology and the modelled task. The application of the model is illustrated using examples of muscle injuries created by surgical procedures. The three examples used represent a posterior surgical approach to the spine, an anterior approach to the spine and uni-lateral total hip replacement surgery. Although the three examples simulate different muscle injuries, all demonstrate the production of significant asymmetrical moments and/or reduced joint compression following surgical intervention. This result has implications for patient rehabilitation and the potential for further injury to the spine. The development and application of the model has highlighted a number of areas where current knowledge is deficient. These include muscle activation levels for tasks in postures other than upright standing, changes in spinal kinematics following surgical procedures such as spinal fusion or fixation, and a general lack of understanding of how the body adjusts to muscle injuries with respect to muscle activation patterns and levels, rate of recovery from temporary injuries and compensatory actions by other muscles. Thus the comprehensive and innovative anatomical model which has been developed not only provides a tool to predict the forces and moments experienced by the intervertebral joints of the spine, but also highlights areas where further clinical research is required.

Survey of the fatty acid composition of Canadian beef: Backfat and longissimus lumborum muscle

[EN]A survey of Canadian retail beef was undertaken with emphasis on the trans fatty acid (TFA) and conjugated linoleic acid (CLA) isomers, and compared with current health recommendations. Thirty striploin steaks were collected in the winter and summer from major grocery stores in Calgary (Alberta, Canada). Steak fatty acid compositions (backfat and longissimus lumborum muscle analysed separately) showed minor seasonal differences with lower total saturates (PB0.05) and higher total monounsaturates (PB 0.01) in winter, but no differences in total polyunsaturated fatty acids. The ratio of n-6 and n-3 polyunsaturated fatty acid in longissimus lumborum averaged 5.8. The average TFA content in longissimus lumborum was 0.128 g 100 g_1 serving size, and 10t-18:1 was found to be the predominant isomer (32% of total trans), while vaccenic acid was second most abundant (15% of total trans). The CLA content in longissimus lumborum was similar to that of backfat, ranging from 0.43 to 0.60% of total fatty acids and rumenic acid represented 60% of total isomers. Overall, there is still room for improvement in the saturated, mono- and polyunsaturated fatty acid composition of Canadian beef to meet general dietary guidelines for human consumption and additional targets should include reducing 10t-18:1 while increasing both rumenic and vaccenic acids.

Qualitative-feed-restricted heavy swine: meat quality and morpho-histochemical characteristics of muscle fibers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Phenotypic and genetic parameters compared during repeated measures of longissimus muscle area and subcutaneous fat thickness in Nelore cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genetic and environmental factors affecting ultrasound measures of longissimus muscle area and backfat thickness in Nelore cattle

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Selection for higher body weight in Nelore cattle is effective in achieving an increase of longissimus muscle area without reducing subcutaneous fat thickness

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Shelf-life characteristics of longissimus muscle of feedlot bullocks supplemented with vitamin D and E.

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The influence of an abdominal support for a dental stool in the distributions and electrical activity of the longissimus and the superior trapezius muscle in dentists

This study evaluated the influence an abdominal support attached to a traditional stool, of those used by dentists, has on the body's distribution of the electrical activity of the superior trapezius and the longissimus thoracic muscles of dental students during the execution of a clinical procedure. The results showed no significant difference in the body's distribution in the seat and backrest, but did reveal there was a weight discharge of 3.1 +/- 1.9% of dentist's body weight in the abdominal support. The 9 o'clock position proved to be the best position to perform clinical procedures. It was also observed that the position was closer to the body's axis.

CARACTERÍSTICAS DE QUALIDADE do CONTRAFILÉ (m. L. dorsi) DE TOUROS JOVENS da RAÇA NELORE

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)