Studies on maturation, spawning, fecundity and sex ratio in Barbus (Puntius) sarana (Hamilton-Buchanan) from Lake Kolleru, Andhra Pradesh

Barbus sarana contains only one batch of mature ova in the mature ovaries to be spawned in one spawning act. It spawns during July-September. The fecundity ranges from 11,201 to 224,248 ova. There is a positive curvilinear correlation between total length and fecundity, the latter increasing with length at a rate of less than cube of length. The stock of this species from Lake Kolleru appears to be more fecund than that inhabiting Loni reservoir. The sex ratio indicates that females outnumber males in all months and in larger length groups. Females appear to reach a larger length than males.

Biology of fouling in Neendakara port, a tropical estuary in the south west coast of India

Species composition and some aspects of the biology of the fouling community in Neendakara port (southwest coast of India) has been examined for a period of one year. Fouling organisms were collected with a system of glass panels exposed for varying durations and during different months in the port. One species of sponge, nine species of coelenterates, thirteen species of polyzoans, four species of mud-tube dwelling polychaetes, four species of serpulids, one species each of mud-tube forming amphipod and tanaid, two species of oysters, six species of mussels and not less than eight species of tunicates were the macro fouler which settled over the panels. Monthly and seasonal settlement of the different species has been recorded. Fouling has been a continuous process occurring throughout the year in Neendakara port with slightly fluctuating biomass and considerably varying species composition. Alternate species dominance of marine and brackish water forms has been an important feature of fouling in the area. Number of species of the sedentary fouling animals represented on test panels has been high during the highly saline pre-monsoon period and low during the monsoon period.

Hydrobiological studies of an irrigation tank with reference to the culture of large murrel, Channa marulius (Hamilton) and striped murrel Channa striatus (Bloch)

The importance of selection of species for culture according to the ecological niches and fish food organisms is highlighted with respect to the Fox Sagar, an irrigation take. The tank was infested with submerged vegetation as well as minnows and weed fishes, which rendered the tank unsuitable for the culture of Indian major carps. The tank was stocked with 8000 fingerlings of Channa marulius and C. striatus during 1981 by the local fisherman co-operative society. Only partial harvest was possible during 1982 because of high water level. The final harvest was in April-May, 1983. The yield obtained was 3640 kg during the culture period of about 20 months.

Length-weight relationship in Nandus nandus (Hamilton) (Perciformes-Teleostei)

Length-weight relationship of the freshwater fish of Pamba River, Nandus nandus (Ham) has been worked out. The results showed that the slope values and elevations were not significant and hence a combined regression equation has been calculated for both the sexes (Log W=2.4130 Log L -0.3306). The’t’ test analyses were conducted and found that the growth departs significantly from the isometric growth. Thus the formula W=aL super(n) has to be applied in calculating the length-weight relationship of this species.

On the optimum mesh size for the capture of Barbus tor (Hamilton)

Results of mesh selectivity experiments on B. tor are presented in this paper. Selectivity curve on the basis of maximum girth of fish in relation to perimeter of mesh was worked out. The optimum girth/mesh perimeter ratio was found to be 1.31. A linear regression of G+0.445L=12.8 was fitted for conversion of length to girth.

Development of cell culture from caudal fin and heart of Tor tor (Hamilton-Buchanan)

Tor mahseer (Tor tor), possess high commercial and recreational value as they are potential game as well as food fish of India. Two cell culture systems were developed from fin and heart of T. tor (Hamilton-Buchanan). The explants excised aseptically from fingerling of T. tor were cultured in Leibovitz-15 (L-15) medium with 20% fetal bovine serum (FBS). Radiation of cells started after 72 hours and 48 hours of explant attachment from caudal fin and heart respectively. Confluent monolayer of cells with heterogeneous morphology around fin explants was observed after 7-10 days, where as a homogenous confluent layer of fibroblastic cells from heart explant was observed after 12-13 days. The establishment of cell culture systems from different organs and tissues of commercial important species would facilitates in vitro research.

Modular hybrid dilated Mach-Zehnder switch with integrated SOAs for large port count switches

A modular dilated MZI based optical switch with integrated SOAs is demonstrated with excellent -40dB crosstalk/extinction ratio, 3ns switching time and nearly penalty-free operation. Studies show an 8×8 switch with 14dB IPDR for 0.5dB penalty. © 2014 OSA.

Revised diagnosis of the genus Bangana Hamilton, 1822 (Pisces : Cyprinidae), with taxonomic and nomenclatural notes on the Chinese species

Most morphological characters diagnostic of the 13 Chinese species of the cyprinid genus Sinilabeo Rendahl, 1932, are identical to those of the genus Bangana Hamilton, 1822. Consequently, these 13 species are transferred to Bangana. A revised diagnosis is provided for the now-expanded genus Bangana, and a dichotomous key and taxonomic and nomenclatural notes are included for the following valid Chinese species: B. decora, B. dero, B. devdevi, B. discognathoides, B. lemassoni, B. lippa, B. rendahli, B. tonkinensis, B. tungting, B. wui, B. xanthogenys, B. yunnanensis, and B. zhui. Literature reports, by Chinese authors, of Sinilabeo dero from the upper Irrawady River basin, in Yunnan, are based on misidentifcations of B. devdevi. Sinilabeo cirrhinoides Wu and Lin in Wu, Lin, Chen, Chen and He, 1977, and S. laticeps Wu and Lin in Wu, Lin, Chen, Chen and He, 1977, are junior subjective synonyms of B. devdevi and B. lippa, respectively. Sinilabeo yunnanensis Wu, Lin, Chen, Chen and He, 1977, is an available name, and a lectotype is designated for the species. Bangana zhui ( Zheng and Chen, 1983) is a valid species distinct from B. yunnanensis.

Silicon-Based Asymmetric Add-Drop Microring Resonators with Ultra-Large Through-Port Extinctions

We theoretically simulate and experimentally demonstrate ultra-large through-port extinctions in silicon-based asymmetrically-coupled add-drop microring resonators (MRs). Through-port responses in an add-drop MR are analyzed by simulations and large extinctions are found when the MR is near-critically coupled. Accurate fabrication techniques are applied in producing a series of 20 mu m-radii add-drop microrings with drop-side gap-widths in slight differences. A through-port extinction of about 42.7 dB is measured in an MR with through-and drop-side gap-width to be respectively 280 nm and 295 nm. The large extinction suggests about a 20.5 dB improvement from the symmetrical add-drop MR of the same size and the through-side gap-width. The experimental results are finally compared with the post-fabrication simulations, which show a gap-width tolerance of > 30 nm for the through-port extinction enhancement.

Two-port InGaAsP/InP square resonator microlasers

Two-port InGaAsP/InP square resonator microlasers with a side length of 20 mm have been fabricated by the planar technology process, which have two 1 mu m-wide output ports connected to the vertices of the square resonator. Continuous-wave electrically injected microsquare lasers have been realised at room temperature with mode Q-factors of 1.75 x 10(4) at the threshold current.

Investigation on multiple-port microcylinder lasers based on coupled modes

Microcylinder resonators with multiple ports connected to waveguides are investigated by 2D finite-difference time-domain (FDTD) simulation for realizing microlasers with multiple outputs. For a 10 mu m radius microcylinder with a refractive index of 3.2 and three 2 mu m wide waveguides, confined mode at the wavelength of 1542.3 nm can have a mode Q factor of 6.7 x 10(4) and an output coupling efficiency of 0.76. AlGaInAs/InP microcylinder lasers with a radius of 10 mu m and a 2 mu m wide output waveguide are fabricated by planar processing techniques. Continuous-wave electrically injected operation is realized with a threshold current of 4 mA at room temperature, and the jumps of output power are observed accompanying a lasing mode transformation.

Design of novel three port optical gates scheme for the integration of large optical cavity electroabsorption modulators and evanescently-coupled photodiodes

This paper presents a novel scheme to monolithically integrate an evanescently-coupled uni-travelling carrier photodiode with a planar short multimode waveguide structure and a large optical cavity electroabsorption modulator based on a multimode waveguide structure. By simulation, both electroabsorption modulator and photodiode show excellent optical performances. The device can be fabricated with conventional photolithography, reactive ion etching, and chemical wet etching.

An improved TM method for full two-port calibration of the asymmetric test fixtures

Three known standards, including at least one transmission standard, are normally required for the full two-port calibration of test fixtures. Based on the triple-through method, a new general-purpose calibration procedure using only one known reflection standard is proposed in this paper. The experimental results show that our method call provide a simple and accurate approach to fall two-port calibration of the asymmetric test fixtures. (c) 2005 Wiley Periodicals, Inc.

Measurement of a reciprocal four-port transmission line structure using the 16-term error model

A new method to measure reciprocal four-port structures, using a 16-term error model, is presented. The measurement is based on 5 two-port calibration standards connected to two of the ports, while the network analyzer is connected to the two remaining ports. Least-squares-fit data reduction techniques are used to lower error sensitivity. The effect of connectors is deembedded using closed-form equations. (C) 2007 Wiley Periodicals, Inc.

Two-port calibration of test fixtures with different test ports

The open-short-load (OSL) method is very simple and widely used for one-port test fixture calibration. In this paper, this method is extended, for the first time, to the two-port calibration of test fixtures with different test ports. The problem of phase uncertainty arising in this application has been solved. The comparison between our results and those obtained with the SOLT method shows that the method established is accurate for practical applications. (C) 2002 Wiley Periodicals, Inc.