Determination of ochratoxin A in bread: evaluation of microwave-assisted extraction using an orthogonal composite design coupled with response surface methodology

An analytical method using microwave-assisted extraction (MAE) and liquid chromatography (LC) with fluorescence detection (FD) for the determination of ochratoxin A (OTA) in bread samples is described. A 24 orthogonal composite design coupled with response surface methodology was used to study the influence of MAE parameters (extraction time, temperature, solvent volume, and stirring speed) in order to maximize OTA recovery. The optimized MAE conditions were the following: 25 mL of acetonitrile, 10 min of extraction, at 80 °C, and maximum stirring speed. Validation of the overall methodology was performed by spiking assays at five levels (0.1–3.00 ng/g). The quantification limit was 0.005 ng/g. The established method was then applied to 64 bread samples (wheat, maize, and wheat/maize bread) collected in Oporto region (Northern Portugal). OTAwas detected in 84 % of the samples with a maximum value of 2.87 ng/g below the European maximum limit established for OTA in cereal products of 3 ng/g.

Response surface methodology applied to SPE for the determination of ibuprofen in various types of water samples

Over the last few years, there has been a growing concern about the presence of pharmaceuticals in the environment. The main objective of this study was to develop and validate an SPE method using surface response methodology for the determination of ibuprofen in different types of water samples. The influence of sample pH and sample volume on the ibuprofen recovery was studied. The effect of each studied independent variable is pronounced on the dependent variable (ibuprofen recovery). Good selectivity, extraction efficiency, and precision were achieved using 600 mL of sample volume with the pH adjusted to 2.2. LC with fluorescence detection was employed. The optimized method was applied to 20 water samples from the North and South of Portugal.

Choosing best components for an amputee: a methodology for the best decision-making

The harmony between the stump and the prosthesis is critical to allow it to fulfill its function enabling an efficient gait. A well fitted socket, with an efficient and comfortable suspension, allows the amputee to continue their daily living activities, maintaining the stump functional, making this correlation between socket and suspension very important in the functionality of the prosthesis, mobility and overall satisfaction with the device. Of our knowledge, the quantitative correlation between all of these factors as not yet been assessed. Aim of study: Verify and confirm the process of decision-making for four different trans-tibial prostheses with suspension systems: Hypobaric(A), PIN(B), Classic Suction(C) and Vacuum Active –VASS(D) according data provided by gait efficiency (mlO2/kg/m) imagiology (pistonning) and amputee perception.

A Design methodology for integrated inductor-based DC-DC converters

A design methodology for monolithic integration of inductor based DC-DC converters is proposed in this paper. A power loss model of the power stage, including the drive circuits, is defined in order to optimize efficiency. Based on this model and taking as reference a 0.35 mu m CMOS process, a buck converter was designed and fabricated. For a given set of operating conditions the defined power loss model allows to optimize the design parameters for the power stage, including the gate-driver tapering factor and the width of the power MOSFETs. Experimental results obtained from a buck converter at 100 MHz switching frequency are presented to validate the proposed methodology.

Cálculo mental com números racionais não negativos: um estudo sobre as estratégias utilizadas por alunos do 4.º ano de escolaridade

Relatório Final apresentado à Escola Superior de Educação de Lisboa para a obtenção de grau de mestre em Ensino do 1.º e 2.º Ciclo do Ensino Básico

O impacto da variação do preço na procura de cuidados de saúde

RESUMO - Assiste-se a um crescimento exponencial das despesas em saúde, quer na Europa como nos Estados Unidos. Em Portugal, os gastos totais com a saúde ascenderam a 10,2% do PIB, em 2006, contra os 8,8% registados no início da década anterior. É importante perceber o que motiva este crescimento quer em termos globais, quer no que diz respeito ao consumo de recursos, bem como até em termos da despesa pública. Este projecto tem dois objectivos fundamentais: em primeiro lugar, contribuir para o estudo dos factores determinantes da procura de cuidados de saúde em Portugal e, consequentemente, determinar as elasticidades procura – preço para diferentes tipos de cuidados de saúde. Metodologia: Estudo observacional baseado na análise empírica de dados administrativos (claims) respeitantes à utilização dos cuidados de saúde por parte de 12.230 indivíduos detentores de um plano de seguro de saúde individual, numa seguradora privada em Portugal. As elasticidades procura – preço para os diferentes tipos de cuidados de saúde obtiveram-se utilizando as variações percentuais das quantidades dos diferentes cuidados de saúde, antes e depois da variação do preço pago pelo indivíduo, para cada tipo de cuidado de saúde. Resultados: De acordo com a teoria económica tradicional o aumento do preço a pagar reduz o consumo de cuidados de saúde, e a procura é elástica, ou seja, os valores da elasticidade procura – preço obtidos são superiores a 1, em valor absoluto, logo o aumento do preço levou a uma redução mais do que proporcional das quantidades procuradas. A procura de cuidados de saúde em ambulatório é mais sensível à variação do preço do que a procura de cuidados de internamento. ------- ABSTRACT - We are witnessing an exponential growth of health care expenditures around the world. In Portugal, the total expenditure on health amounted to 10.2% of GDP in 2006, against 8.8% at the beginning of previous decade. It is important to understand what motivates this growth both in overall terms, with respect to resource consumption, and even in terms of public spending. This study was designed two achieve two objectives: first, to contribute to the study of demand for health care and, more specifically, to analyze the effect of price changes on the utilization of health care services; and secondly, to estimate the demand elasticity for different types of heath care. Methodology: Observational study based on empirical analysis of administrative data (claims) from a private health insurance Company in Portugal. The sample used had information regarding 12.230 individuals. Demand elasticity for the different types of health care services was obtained by the quotient between the percentage changes in the quantity of health care services, before and after the change in the price paid by the corresponding percentage change in the price. Results: This study showed that, for all medical services, price increases were associated with reductions in the quantity of care consumed as predicted by neoclassical demand theory, and we are in the presence of an elastic demand. This means that price elasticity is greater than 1 in absolute value so the increase in the price led to a more than proportional reduction in the quantity demanded. Demand elasticity was more responsive to changes in the price of specialist and emergency care than to changes in the price of inpatient care.

Desempenho Manual do Membro Superior Ipsilesional em Indivíduos com Acidente Vascular Encefálico

Introdução: nos pacientes que sofreram um Acidente Vascular Encefálico são incididos programas de reabilitação que visam principalmente o hemicorpo contralesional, negligenciando o lado ipsilesional. Porém, estão descritas alterações sensitivas e motoras do membro superior ipsilesional neste grupo populacional. Objetivo: avaliar os défices de sensibilidade, destreza grossa e fina e força de preensão da mão ipsilesional em indivíduos com diagnóstico de Acidente Vascular Encefálico, comparando o sexo, o hemisfério cerebral onde se localiza a lesão, a fase aguda e crónica, tendo como referência um grupo controlo. Metodologia: este estudo observacional de carácter analítico transversal foi constituído por 34 indivíduos em que 18 deles tem diagnóstico de Acidente Vascular Encefálico e 16 sem défices neurológicos. A avaliação foi iniciada com um questionário para recolha de informações dos participantes e de seguida foram aplicados instrumentos de avaliação num só momento com o mesmo examinador. Para avaliar a sensibilidade foi usado o Moving Touch-Pressure Test, para a força o Dinamómetro Baseline®, na avaliação da destreza grossa o Teste Caixa e Blocos e por fim a destreza fina com o Purdue Pegboard Test. Estatisticamente recorreu-se ao teste T-student para amostras independentes com nível de significância de 0,05. Resultados: verificou-se que o membro superior ipsilesional dos indivíduos que sofreram um AVE apresenta um défice na força de preensão manual com nível se significância de p=0,001, e de p=0,000 para a destreza fina e grossa e sensibilidade, quando comparados com um grupo controlo. Constatou-se também que no grupo de indivíduos com diagnóstico de Acidente Vascular Encefálico, o sexo masculino obteve melhores resultados em todos os parâmetros avaliados. Observou-se ainda que tanto os homens como as mulheres após sofrerem um Acidente Vascular Encefálico apresentam défices funcionais na mão ipsilesional, mas no entanto os homens apresentam apenas alterações na destreza grossa (p=0,017) e na força (p=0,001). Na comparação dos hemisférios cerebrais lesados e das fases aguda e crónica do AVE verificou-se que não houve diferenças significativas. Conclusão: Existem défices no membro superior ipsilesional após Acidente Vascular Encefálico, sendo então pertinente a sua inclusão em programas de reabilitação, podendo assim melhorar a qualidade de vida dos indivíduos com esta patologia.

A Data-mining-based Methodology to support MV Electricity Customers' Characterization

This paper presents an electricity medium voltage (MV) customer characterization framework supportedby knowledge discovery in database (KDD). The main idea is to identify typical load profiles (TLP) of MVconsumers and to develop a rule set for the automatic classification of new consumers. To achieve ourgoal a methodology is proposed consisting of several steps: data pre-processing; application of severalclustering algorithms to segment the daily load profiles; selection of the best partition, corresponding tothe best consumers’ segmentation, based on the assessments of several clustering validity indices; andfinally, a classification model is built based on the resulting clusters. To validate the proposed framework,a case study which includes a real database of MV consumers is performed.

Realistic Traffic Scenarios Using a Census Methodology: Vila Real Case Study

This paper presents the first phase of the redevelopment of the Electric Vehicle Scenario Simulator (EVeSSi) tool. A new methodology to generate traffic demand scenarios for the Simulation of Urban MObility (SUMO) tool for urban traffic simulation is described. This methodology is based on a Portugal census database to generate a synthetic population for a given area under study. A realistic case study of a Portuguese city, Vila Real, is assessed. For this area the road network was created along with a synthetic population and public transport. The traffic results were obtained and an electric buses fleet was evaluated assuming that the actual fleet would be replaced in a near future. The energy requirements to charge the electric fleet overnight were estimated in order to evaluate the impacts that it would cause in the local electricity network.

Methodology for collaborative enterprise reference ontology building

Dissertation presented at Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa to obtain the Master degree in Electrical Engineering and Computer Science

Rastreio aos factores de risco modificáveis da doença isquémica da doença isquémica coronária no concelho de Faro

RESUMO: Introdução: As doenças cardiovasculares (DCV) são a principal causa de morbilidade, e mortalidade prematura em Portugal e na Europa. A sua causa é multifactorial e a maior parte dos casos resultam de factores de risco modificáveis. O cálculo do RCVG, pretende ser uma estimativa da probabilidade de desenvolver DCV. Este estudo pretende identificar e caracterizar indivíduos em risco de desenvolver doença isquémica coronária e respectivos factores de risco modificáveis, no Concelho de Faro e determinar a sua prevalência e calcular SCORE global de risco cardiovascular Material e métodos: Estudo, observacional transversal, que incluiu um total de 601 individuos, com idades entre os 40-64 anos de idade, residentes no concelho de Faro, inscritos no Centro de Saúde de Faro e que consistiu da avaliação da prevalência dos factores de risco modificáveis da doença isquémica coronária pela utilização de instrumentos específicos. Resultados e discussão: Foram incluídos 601 individuos de ambos os géneros. Trata-se de uma população potencialmente menos literada e num contexto social, cultural, familiar e profissional que, eventualmente, condicionará o estilo de vida e opções em saúde. 55,9% dos indivíduos tem HTA; 42,4 % dos indivíduos tem valor de colesterol total elevado, compatível com dislipidemia (cut off de 200mg/dl); 50,9 % (cut off 190 mg/dl); 8,7% tem valores de glicemia compatíveis com diabetes; 19,8 são fumadores; 72,7% apresenta excesso de peso/obesidade; 37,6% dos indivíduos tem baixo nível de actividade física; 20,1% dos indivíduos apresenta evidência de stress, ansiedade ou depressão, pela avaliação utilizando a EADS. Parece existir evidência de maior proporção de factores de risco entre os homens e uma proporção significativa de indivíduos com importantes factores de risco modificáveis em simultâneo. Mais de metade dos indivíduos tem 3 ou mais factores de risco em simultâneo, com o excesso de peso/obesidade, hipertensão e dislipidemia a serem os com mais comummente associados. 9,7% dos indivíduos tem risco entre 5-9% e apenas 29,3% tem SCORE inferior a 1%. Conclusões: A elevada prevalência dos factores de risco modificáveis e a elevada proporção de indivíduos identificados com esses factores, e com risco moderado e alto de DCV, parece justificar uma atenção redobrada a esse nível e um planeamento dos cuidados de saúde ajustados e específicos para esta realidade.----------------------- ABSTRACT: Introduction: Cardiovascular diseases are the leading cause of morbidity and premature mortality in Portugal and in Europe. The cause is multifactorial and in most cases results from modifiable risk factors. The global cardiovascular risk calculation is intended as an estimate of the likelihood of developing cardiovascular disease. This study aims to identify and characterize individuals at risk of developing ischemic heart disease and their modifiable risk factors in Faro, and determine its prevalence as well as to calculate global cardiovascular risk SCORE. Methodology: This was a cross sectional observational study, which included a total of 601 individuals, aged 40-64 years of age living in Faro, and enrolled atthe Health Centre of Faro. The prevalence of modifiable risk factors of disease ischemic heart was assessed once, after letter invitation, by the use of the following instruments (acrescentar os instrumentos). Data was analysed with (incluir testes estatisticos utilizados) Results and Discussion: We included 601 subjects of both genders. This is a potentially less literate population with a social, cultural and family contextwhich, may eventually constrain lifestyle and health choices. Almost sixty percent (55.9%) of the individuals have hypertension, 42,4% have high total cholesterol value, compatible with dyslipidemia, 8,7 % had blood glucose values compatible with diabetes, 19,8% are smokers, 72,7% are overweight or obese, 37,6% of individuals have low levels of physical activity, 20,1% of individual show evidence of stress, anxiety or depression, as assessed by using the DASS. There seems to be evidence of a greater proportion of risk factors among men and a significant proportion of individuals with major modifiable risk factores simultaneously. More than half of the studied individuals have three or more risk factors simultaneously, being excess weight / obesity, hypertension and dyslipidemia, the most commonly associated. Almost ten percent (9,7%) of the individuals have a risk between 5-9% and only 29,3% has a SCORE less than 1%. Conclusion: The high prevalence of modifiable risk factors and the high proportion of individuals identified with these factors, and with moderate and high risk of CVD, appear to justify further attention at this level and planning of health care interventions specifically adjusted to this reality.

The CONCERTO methodology for model-based development of avionics SW

20th International Conference on Reliable Software Technologies - Ada-Europe 2015 (Ada-Europe 2015), 22 to 26, Jun, 2015, Madrid, Spain.

Effectiveness of house dust mite acaricide tri-n-butyl tin maleate on carpets, fabrics and mattress foam: a standardization of methodology

The aim of this study was to determine the effectiveness of the acaricide tri-n-butyl tin maleate, industrially applied to samples of carpets, mattress foam, and fabrics used for furniture upholstery, soft toys and shoe uppers. Approximately 100 adult house dust mites of the species Dermatophagoides pteronyssinus were inoculated into a Petri dish containing the sample (a piece of carpet, mattress foam, or fabric), treated with the acaricide, randomly collected. Mite-maintenance culture medium was added on top of each sample. After one, two, three, seven and 30 days of incubation at 25 ºC and 75% relative humidity, each dish was examined using a 40X stereoscopic microscope (40X). One hundred percent acaricide effectiveness was obtained in treated materials by the end of the 30th-day postinoculation period, under optimal conditions for mite maintenance.

Development of a SPE–UHPLC–MS/MS methodology for thedetermination of non-steroidal anti-inflammatory and analgesicpharmaceuticals in seawaterPaula

An analytical methodology for the simultaneous determination of seven pharmaceuticals and two metabolites belonging to the non-steroidal anti-inflammatory drugs (NSAIDs) and analgesics therapeutic groups was developed based on off-line solid-phase extraction and ultra-high performance liquid chromatography coupled to tandem mass spectrometry (SPE–UHPLC–MS/MS). Extraction conditions were optimized taking into account parameters like sorbent material, sample volume and sample pH. Method detection limits (MDLs) ranging from 0.02 to 8.18 ng/L were obtained. This methodology was successfully applied to the determination of the selected pharmaceuticals in seawater samples of Atlantic Ocean in the Northern Portuguese coast. All the pharmaceuticals have been detected in the seawater samples, with pharmaceuticals like ibuprofen, acetaminophen, ketoprofen and the metabolite hydroxyibuprofen being the most frequently detected at concentrations that can reach some hundreds of ng/L.

A Methodology for Creating an Adapted Command Language for Driving an Intelligent Wheelchair

Intelligent wheelchairs (IW) are technologies that can increase the autonomy and independence of elderly people and patients suffering from some kind of disability. Nowadays the intelligent wheelchairs and the human-machine studies are very active research areas. This paper presents a methodology and a Data Analysis System (DAS) that provides an adapted command language to an user of the IW. This command language is a set of input sequences that can be created using inputs from an input device or a combination of the inputs available in a multimodal interface. The results show that there are statistical evidences to affirm that the mean of the evaluation of the DAS generated command language is higher than the mean of the evaluation of the command language recommended by the health specialist (p value = 0.002) with a sample of 11 cerebral palsy users. This work demonstrates that it is possible to adapt an intelligent wheelchair interface to the user even when the users present heterogeneous and severe physical constraints.