Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Adição de subprodutos da cinza da casca de café (coffea canephora) em massa cerâmica para porcelanato

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

Acúmulo de massa seca e de macronutrientes por plantas de Glycine max e Solanum americanum

A soja é uma das principais culturas agrícolas do Brasil, sendo a sua produtividade muito influenciada pela competição exercida pelas plantas daninhas. Foram realizados dois experimentos em casa de vegetação, em Jaboticabal, SP, objetivando determinar o acúmulo de massa seca, assim como a distribuição e o acúmulo de macronutrientes em plantas de soja, no período de outubro de 2000 a fevereiro de 2001, e de Solanum americanum, no período de janeiro a maio de 1995. As plantas cresceram em vasos com capacidade de 7 litros, preenchidos com areia de rio lavada e peneirada; elas foram irrigadas diariamente com solução nutritiva. Os tratamentos foram representados pelas épocas de amostragem, realizada a intervalos de 14 dias, iniciando-se 21 dias após a emergência (DAE), até 161 DAE para S. americanum e 119 DAE para soja cv. BR-16 (precoce). O ponto de máximo acúmulo teórico de massa seca deu-se aos 104 DAE para a soja (35,0 g por planta) e 143 DAE para S. americanum (179,62 g por planta). da emergência até 49 e 63 DAE, as folhas apresentaram maior participação no acúmulo de massa seca para soja e S. americanum, respectivamente. Após esses períodos, verificou-se, em ambas as espécies, inversão na representatividade das folhas por caules para a espécie daninha e por caules e, posteriormente, por estruturas reprodutivas, para a cultura. A taxa de absorção diária dos macronutrientes atingiu maiores valores entre 69 e 87 DAE para a soja e entre 105 e 119 DAE para a planta daninha. Considerando a média dos valores de pontos de inflexão observados para a cultura da soja, tem-se que aos 75 DAE uma planta de soja acumula teoricamente 23,9 g de massa seca, 564,4 mg de N, 7,1 mg de P, 490,8 mg de K, 487,0 mg de Ca, 156,6 mg de Mg e 36,0 mg de S. Para o mesmo período, uma planta de S. americanum acumula teoricamente 33,75 g de massa seca, 875,96 mg de N, 88,46 mg de P, 983,54 mg de K, 647,60 mg de Ca, 100,93 mg de Mg e 42,15 mg de S.

Acúmulo de massa seca e macronutrientes por plantas de Glycine max e Richardia brasiliensis

Foram realizados dois experimentos, em condições de casa de vegetação, no Departamento de Biologia Aplicada à Agropecuária da FCAV-UNESP de Jaboticabal, objetivando-se determinar o acúmulo de massa seca, assim como a distribuição e o acúmulo de macronutrientes durante os ciclos de vida de plantas de soja cultivar BR16, no período de outubro de 2000 a fevereiro de 2001, e de Richardia brasiliensis (poaia-branca), uma planta daninha de elevada importância para esta cultura no Brasil, especialmente em áreas de plantio direto, no período de outubro de 1998 a fevereiro de 1999. Os estudos foram realizados em delineamento experimental inteiramente casualizado, com quatro repetições. Quatro plantas cresceram em vasos com capacidade de sete litros, preenchidos com areia de rio lavada, peneirada e irrigada diariamente com solução nutritiva. Os tratamentos foram representados pelas épocas de amostragem, realizadas a intervalos de 14 dias, a saber: 22, 36, 50, 64, 78, 92, 106, 120, 134, 148, 162 e 176 dias após a emergência (DAE) das plantas de R. brasiliensis; e 21, 35, 49, 63, 77, 91, 105 e 119 DAE das plantas de soja cv. BR-16 (precoce). em ambas as plantas, as folhas tiveram a maior partição de biomassa durante sete semanas. Para este dado, a partição foi maior para as estruturas reprodutivas em soja e nos caules para a poaia-branca. O ponto de máximo acúmulo teórico de massa seca deu-se aos 104 DAE para a soja (36,6 g por planta) e aos 146 DAE para a poaia-branca (16,4 g por planta). da emergência até aos 50 DAE as folhas apresentaram maior participação no acúmulo de massa seca, nas duas espécies. Após 50 DAE notou-se, em ambas as espécies, uma inversão na representatividade das folhas por caules, para a espécie daninha, e por caules e posteriormente por estruturas reprodutivas, para a cultura. A taxa de absorção diária dos macronutrientes atingiu maiores valores entre 69 e 87 DAE para a soja e entre 106 a 111 DAE para a planta daninha. Levando em conta a média dos valores de pontos de inflexão observados para a cultura da soja, aos 78 DAE uma planta de soja acumula teoricamente 25,9 g de massa seca; 615,5 mg de N; 77,2 mg de P; 538,6 mg de K; 535,0 mg de Ca; 171,5 mg de Mg; e 39,5 mg de S. Para o mesmo período, uma planta de R. brasiliensis acumula teoricamente 3,7 g de massa seca; 50,8 mg de N; 3,2 mg de P; 104,4 mg de K; 127,8 mg de Ca; 18,8 mg de Mg; e 3,7 mg de S.

Estudo comparativo do acúmulo de massa seca e macronutrientes por plantas de milho var. BR-106 e Brachiaria plantaginea

Foram realizados dois experimentos, em casa de vegetação, no Departamento de Biologia Aplicada à Agropecuária da FCAV-UNESP de Jaboticabal, objetivando-se determinar o acúmulo de massa seca e a distribuição e acúmulo de macronutrientes em plantas de milho, no período de outubro de 2000 a fevereiro de 2001, e de capim-marmelada, no período de setembro de 2003 a fevereiro de 2004. Os estudos foram realizados em delineamento experimental inteiramente casualizado, com quatro repetições. As plantas cresceram em vasos com capacidade de sete litros - preenchidos com areia de rio lavada e peneirada - e foram irrigadas diariamente com solução nutritiva. Os tratamentos foram representados pelas épocas de amostragem realizadas a intervalos de 14 dias, a saber: 21, 35, 49, 63, 77, 91, 105, 119 e 133 dias após a emergência (DAE) das plantas de milho; e 21, 35, 49, 63, 77, 91, 105, 119, 133 e 147 DAE das plantas de capim-marmelada. O ponto de máximo acúmulo teórico de massa seca deu-se aos 122 DAE para o milho (143,8 g por planta) e aos 143 DAE para o capim-marmelada (23,9 g por planta). A taxa de absorção diária dos macronutrientes atingiu maiores valores entre 71 e 104 DAE para o milho e entre 96 e 111 DAE para a planta daninha. Levando-se em conta a média dos valores de pontos de inflexão observados na cultura do milho, aos 85 DAE uma planta de milho acumula, teoricamente, 83,0 g de massa seca; 788,9 mg de N; 137,5 mg de P; 1.385,6 mg de K; 551,8 mg de Ca; 217,9 mg de Mg; e 92,5 mg de S. Enquanto que, no mesmo período, uma planta de B. plantaginea acumula, teoricamente, 9,6 g de massa seca; 127,8 mg de N; 15,9 mg de P; 217,3 mg de K; 43,9 mg de Ca; 58,3 mg de Mg; e 15,8 mg de S.

Gênero ou sexualidade?: (re) produção das identidades homoeróticas masculinas no cinema de massa

Homosexuality has been gaining strength in Cinema from the late twentieth century, when there is a dissemination of freedoms around the peripheral or marginal sexualities. Based on this assumption, it was formulated in the dissertation work, an analysis of the relationship between Cinema and Sexuality in order to understand, describe, reflect and analyze possible changes around the performative behaviors of male homosexual from the introduction of them in film production, arising from the mass culture industry. These productions are located in three different decades. In this case, the Cinema has not only the reproductive character of realities, but also a producing agent and consolidating them. The methodology applied was discourse analysis of three film works, namely La Cage aux Folles (1978), In & Out (1997) and Boat Trip (2002). The image, research object of this work, is developed by a mass culture that will produce mass identities which is characterized by crystallization of clichés around the gay world

Teores de nutrientes na folha, qualidade do suco e massa seca de raizes de laranja-Valência em função da irrigação e fertirrigação

O presente trabalho foi desenvolvido na Área Experimental de Irrigação da Faculdade de Ciências Agrárias e Veterinárias de Jaboticabal/Unesp, com o objetivo de avaliar o efeito da fertirrigação sobre o teor foliar de macro e de micronutrientes, a massa fresca de raízes e a qualidade do suco de frutos em um pomar de laranja-'Valência'. Os tratamentos utilizados foram: (SI) sem irrigação e adubação com fertilizante sólido parcelado em quatro vezes; (MI-100) fertirrigação por microaspersão com 100% da evapotranspiração; (MI-50) fertirrigação por microaspersão com 50% da evapotranspiração; (G-100) fertirrigação por gotejamento com 100% da evapotranspiração; e (G-50) fertirrigação por gotejamento com 50% da evapotranspiração. Os teores de macro e micronutrientes nas folhas não foram alterados pela irrigação, pelos sistemas de fertirrigação e pela lâmina de água aplicada. A acidez total titulável foi superior no tratamento sem irrigação, e a % de suco no fruto e ratio não foram afetadas pelos tratamentos com e sem irrigação. A massa fresca de raiz foi maior nos tratamentos irrigados, porém não foram constatadas para esse parâmetro diferenças entre os sistemas de gotejamento e microaspersão. A maior concentração de raízes ocorreu até 10 cm de profundidade e até 30 cm de distância do emissor.

Manganês na nutrição e na produção de massa seca do capim-mombaça

There are few studies that relate the micronutrient manganese nutritional status and production of fodder. The objective was to evaluate the application of manganese in the nutrition and growth of Mombaca grass. The completely randomized design was used with five manganese levels (0, 15, 30, 60, 120 mg dm(-3)) and four replicates. Each experimental unit consisted of a pot filled with 3.5 dm(-3) of soil from Oxisol (Mn = 0.6 mg dm(-3)), containing four plants. Two harvests were set, the first 44 days after sowing and the second 38 days after the first cut. The concentration of manganese in the soils, the manganese content of leaves, number of tillers, plant height, shoot dry mass in each slice and the root system of Mombaca grass were evaluated. The applied rates of manganese resulted in increased accumulation of Mn in the plant, and there was an increase in dry mass of Mombaca grass, with maximum production, obtained from derivation, of 5.9 and 6.3 g plant(-1) for levels of 121 and 71 mg dm(-3) of Mn in the first and second cut respectively. The Mombaca grass has showed high manganese's tolerance, the critical level of toxicity was 841 mg kg(-1) in the second cut.

Modos de aplicação de zinco na nutricão e na produção de massa seca de plantas de trigo

Zinc application methods can affect the nutrition and the initial development of the wheat. Thus, the aim of this work was to analyze the different ways of Zn application in the soil, on nutrition and on dry matter production. A completely randomized experimental design with four replications was used. The experiment was composed by the following Zn application treatments: control (no zinc application); soil incorporation, furrow located, seeds treatment and leaf pulverization. The experimental unit was composed of a pot filled with 7 L of soil. Morphological traits for each plant were determined on 52 days after emergence by the evaluations of plant height, internodes number, tillers number and aerial part dry matter. Still, the soil and plant chemical analysis was accomplished. The furrow located method provided larger concentrations of the micronutrient available. The zinc application methods did not influence the initial growth of the wheat plants. The zinc concentration in leaves was influenced by the different application methods, being the leaf pulverization the one that was caused the largest zinc accumulation on aerial part dry matter.

Acúmulo de massa seca e marcha de absorção de nutrientes em mudas de goiabeira 'Pedro Sato'

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Massa de forragem, composição morfológica e química de capim-tanzânia sob diferentes dias de descanso e altura de resíduo pós-pastejo

The experiment was conducted at UNESP/FCAV, Jaboticabal, SP, with the objective of evaluating the influence of the rest period and height of the residue post-grazing on the dry matter mass, morphologic composition and on the chemical composition of the Tanzania-grass pre-grazing condition, under rotational grazing. The treatments consisted of the combination of two rest periods (25 and 35 days) and two residue height post-grazing (30 and 50 cm), as a complete randomized design in factorial arrangement 2 x 2, with three replications, with the grazing cycles considered as sub plots. The herbage mass of stem, leaves, dead material and the leaf: stem ratio were significantly influenced (P<0.05) by the grazing cycles. The percentage of CP in the leaf and stem and the NDF in the stem, leaf and whole plant were influenced positively (P<0.05) by the grazing cycles. It was observed that the short rest periods associated with the smallest residue height post-grazing presented the best results in terms of herbage mass and chemical characteristics of the herbage.

Produção de massa seca e nutrição de cultivares de arroz de terras altas sob condição de déficit hídrico e adubação silicatada

Although silicon has not been considered an essential element for plant growth and development, it has provided several benefits for the rice crop, especially under biotic and abiotic stress. The objective of this work was to evaluate macronutrient and silicon levels in upland rice cultivars cropped under water deficit and silicon fertilization. The experiment was carried out in greenhouse and the design was the completely randomized block, analyzed as a 2 x 2 x 2 factorial, which consisted of two cultivars, 'Maravilha' (modern group) and 'Caiapo' (traditional group), two silicon rates (0 and 350 kg ha(-1)) and two soil water tensions (-0.025 MPa and -0.050 MPa). Plant dry matter of the 'Maravilha' cultivar was higher compared to the other material. Higher soil water tensions decreased plant dry matter and macronutrient levels. Upland rice cultivars respond distinctively to soil water tensions and silicon rates.

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

Modelagem numérica de escoamento em padrão anular com transferência de calor e massa

Annular flow is the prevailing pattern in transport and energy conversion systems and therefore, one of the most important patterns in multiphase flow in ducts. The correct prediction of the pressure gradient and heat transfer coefficient is essential for optimizing the system s capacity. The objective of this work is to develop and implement a numerical algorithm capable of predicting hydrodynamic and thermal characteristics for upflow, vertical, annular flow. The numerical algorithm is then complemented with the physical modeling of phenomena that occurs in this flow pattern. These are, turbulence, entrainment and deposition and phase change. For the development of the numerical model, axial diffusion of heat and momentum is neglected. In this way the time-averaged equations are solved in their parabolic form obtaining the velocity and temperature profiles for each axial step at a time, together with the global parameters, namely, pressure gradient, mean film thickness and heat transfer coefficient, as well as their variation in the axial direction. The model is validated for the following conditions: fully-developed laminar flow with no entrainment; fully developed laminar flow with heat transfer, fully-developed turbulent flow with entrained drops, developing turbulent annular flow with entrained drops, and turbulent flow with heat transfer and phase change

Estudo de formulação de massa para aplicação em placas cerâmicas

The sector of civil construction is strongly related to the red ceramic industry. This sector uses clay as raw material for manufacturing of various products such as ceramic plates. In this study, two types of clay called clay 1 and clay 2 were collected on deposit in Ielmo Marinho city (RN) and then characterized by thermogravimetric analysis (TG/DTG), differential thermal analysis (DTA), X-ray diffraction (XRD), X-ray fluorescence (XRF), rational analysis and particle size distribution and dilatometric analyses. Ceramic plates were manufactured by uniaxial pressing and by extrusion. The plates obtained by pressing were produced from the four formulations called 1, 2, 3 and 4, which presented, respectively, the following proportions by mass: 66.5% clay 1 and 33.5% clay 2, 50% clay 1 and 50% clay 2, 33.5% clay 1 and 66.5% clay 2, 25% clay 1 and 75% clay 2. After firing at 850, 950 and 1050 °C with heating rate of 10 °C/min and soaking time of 30 minutes, the following technological properties were determined: linear firing shrinkage, water absorption, apparent porosity, apparent specific mass and tensile strength (3 points). The formulation containing 25% clay 1 produced plates with most satisfactory results of water absorption and mechanical resistance, because of that it was chosen for manufacturing plates by extrusion. A single firing cycle was established for these plates, which took place as follow: heating rate of 2 °C/min up to 600 ºC with soaking time of 60 minutes, followed by heating using the same rate up to 1050 ºC with soaking time of 30 minutes. After this cycle, the same technological properties investigated in the plates obtained by pressing were determined. The results indicate (according to NRB 13818/1997) that the plates obtained by pressing from the mixture containing 25 wt% clay 1, after firing at 1050 °C, reach the specifications for semi-porous coating (BIIb). On the other hand, the plates obtained by extrusion were classified as semi-stoneware (group AIIa)