Effect of process variables on fluiddynamics and adhesion efficiency during spouted bed coating of hard gelatine capsules

This article presents an evaluation of the effects of the spouted bed design and operating conditions on system fluiddynamics and process performance during enteric coating of hard gelatine capsules. The design parameters studied were the column diameter (150 mm and 200 mm), the included angle of the conical base, gamma (60 degrees or 40 degrees) and the presence or absence of a Venturi inserted before the inlet air orifice. The process variables studied were the ratio between the feed flow rate of the coating suspension to the spouting gas flow rate (W(s)/W(g)), the mass of capsules loaded to the equipment (M(0)), and the ratio between the Spouting gas flow rate to the gas flow rate at minimum spouting condition (Q/Q(ms)). The response variables were the rate of increase of the capsules mass (K(1)), and the adhesion efficiency (eta). The linear regression equation for the dependent variable K, in terms of the independent variables adequately described the process with an r(2) value of 0.872. Analysis of variance (ANOVA) revealed that increasing of W(s)/W(g), Q/Q(ms) and gamma significantly increased the adhesion efficiency. Adhesion efficiencies higher than 90% were achieved by selecting precise coating conditions, indicating the feasibility of the process for coating of hard gelatine capsules. (C) 2008 Elsevier B.V. All rights reserved.

On compliance of business processes with business contracts

This paper addresses the problem of ensuring compliance of business processes, implemented within and across organisational boundaries, with the constraints stated in related business contracts. In order to deal with the complexity of this problem we propose two solutions that allow for a systematic and increasingly automated support for addressing two specific compliance issues. One solution provides a set of guidelines for progressively transforming contract conditions into business processes that are consistent with contract conditions thus avoiding violation of the rules in contract. Another solution compares rules in business contracts and rules in business processes to check for possible inconsistencies. Both approaches rely on a computer interpretable representation of contract conditions that embodies contract semantics. This semantics is described in terms of a logic based formalism allowing for the description of obligations, prohibitions, permissions and violations conditions in contracts. This semantics was based on an analysis of typical building blocks of many commercial, financial and government contracts. The study proved that our contract formalism provides a good foundation for describing key types of conditions in contracts, and has also given several insights into valuable transformation techniques and formalisms needed to establish better alignment between these two, traditionally separate areas of research and endeavour. The study also revealed a number of new areas of research, some of which we intend to address in near future.

On the discovery of business processes orchestration patterns

COORDINSPECTOR is a Software Tool aiming at extracting the coordination layer of a software system. Such a reverse engineering process provides a clear view of the actually invoked services as well as the logic behind such invocations. The analysis process is based on program slicing techniques and the generation of, System Dependence Graphs and Coordination Dependence Graphs. The tool analyzes Common Intermediate Language (CIL), the native language of the Microsoft .Net Framework, thus making suitable for processing systems developed in any .Net Framework compilable language. COORDINSPECTOR generates graphical representations of the coordination layer together with business process orchestrations specified in WSBPEL 2.0

Estudo da mudança nas práticas de contabilidade de gestão em Portugal: o casa da Amorim Revistimentos

Dissertação apresentada ao Instituto Politécnico do Porto para obtenção do Grau de Mestre em Gestão das Organizações, Ramo de Gestão de Empresas Orientado pela Prof.ª Doutora Maria João Martins Ferreira Major, Prof. Associada, ISCTE Business School - IUL

Distributed process execution in collaborative networks

Processes are a central entity in enterprise collaboration. Collaborative processes need to be executed and coordinated in a distributed Computational platform where computers are connected through heterogeneous networks and systems. Life cycle management of such collaborative processes requires a framework able to handle their diversity based on different computational and communication requirements. This paper proposes a rational for such framework, points out key requirements and proposes it strategy for a supporting technological infrastructure. Beyond the portability of collaborative process definitions among different technological bindings, a framework to handle different life cycle phases of those definitions is presented and discussed. (c) 2007 Elsevier Ltd. All rights reserved.

A reengenharia de processos de negócio : um estudo de casos

Mestrado em Gestão e Empreendedorismo

Influence of the crushing process of recycled aggregates on concrete properties

This work intends to evaluate the (mechanical and durability) performance of concrete made with coarse recycled concrete aggregates (CRCA) obtained using two crushing processes: primary crushing (PC) and primary plus secondary crushing (PSC). This analysis intends to select the most efficient production process of recycled aggregates (RA). The RA used here resulted from precast products (P), with strength classes of 20 MPa, 45 MPa and 65 MPa, and from laboratory-made concrete (L) with the same compressive strengths. The evaluation of concrete was made with the following tests: compressive strength; splitting tensile strength; modulus of elasticity; carbona-tion resistance; chloride penetration resistance; capillary water absorption; and water absorption by immersion. These findings contribute to a solid and innovative basis that allows the precasting industry to use without restrictions the waste it generates. © (2015) Trans Tech Publications, Switzerland.

A process-based control for evolvable production systems

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

An approach for automated service selection and ranking using services choreography

In today’s highly competitive market, it is critical to provide customers services with a high level of configuration to answer their business needs. Knowing in advance the performance associated with a specific choreography of services (e.g., by taking into account the expected results of each component service) represents an important asset that allows businesses to provide a global service tailored to customers’ specific requests. This research work aims at advancing the state-of-the-art in this area by proposing an approach for service selection and ranking using services choreography, predicting the behavior of the services considering customers’ requirements and preferences, business process constraints and characteristics of the execution environment.

An information model for lean, agile, resilient and green supply chain management

Dissertação para a obtenção de Grau de Mestre em Engenharia e Gestão Industrial

Um sistema de informação – a solução?

Pequenas empresas reconhecem a necessidade de sistematizar os seus procedimentos, por forma, a alcançarem sucesso nas suas propostas de negócio. Esta padronização pressupõe uma avaliação do enquadramento social e de mercado existente e dos valores, missão e objetivos das próprias empresas. As constantes inovações na área tecnológica e as mudanças sociais, refletem-se no desenvolvimento e estratégia a seguir pelas organizações, que se desdobram num ambiente muito competitivo e dinâmico, o que lhes exige uma atenção constante e ponderada. Ao analisarmos uma micro empresa portuguesa, que desenvolve a sua atividade na área da gestão e promoção de imóveis para arrendamento de curta duração, verificamos a existência de lacunas ao nível do seu modelo de gestão operacional. A escassez de meios financeiros e humanos, e o fraco conhecimento das práticas de gestão organizacional e estratégica, são fatores limitadores para o bom desempenho da empresa, podendo colocar em causa a sua viabilidade a curto prazo. Esta constatação foi o ponto de partida para a realização deste projeto que, após as diversas leituras efetuadas, o levantamento dos processos existentes, a análise e ponderação das diversas soluções possíveis a aplicar, terminou na proposta de um Sistema de Informação - opção que nos pareceu ser a mais adequada. Esta proposta foi aprovada pela gestão da empresa e o Sistema de Informação irá ser implementado. O presente trabalho teve como objetivo ajudar esta organização a melhorar o seu desempenho. Para atingir estes objetivos foi necessário elencar os pontos fortes e fracos desta empresa, de forma a ser possível agregar num documento, as necessidades que a mesma demonstrava, para colmatar as falhas existentes e que poderiam ser, num futuro próximo, motivo de desagregação da mesma. A metodologia adotada seguiu uma estratégia de investigação descritiva, utilizando o método de investigação-ação. A recolha de dados baseou-se em entrevistas à equipa de gestão e colaboradores da empresa, em documentação levantada na mesma relativa aos processos de gestão e informação institucional, cujos conteúdos foram analisados numa perspetiva qualitativa.

Quality of process modeling using BPMN: a model-driven approach

Dissertação para obtenção do Grau de Doutor em Engenharia Informática

Avaliação de benefícios da integração do BIM nas opera-ções de Facilities Management

Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Perfil de Construção

Ideation at Canon business services

Digitalisation, globalisation, and evolving customer demands are only a few of the factors that are bound to transform the business process services industry for CBS. By investigating new ways to address these imminent challenges, this thesis explores the feasibility of implementing a formal approach to ideation to complement CBS’ service innovation practice. Two workshops were therefore conducted to put theory into action by generating new service ideas in a multifunctional team. Applying both divergent and convergent ideation techniques revealed that the latter improved an idea’s novelty and creativity as opposed to the expected increase in workability and relevance. Additionally, further analysis sheds light into the potential influence of individual characteristics and group dynamics on creativity. The thesis concludes with a discussion on the organisational implications of the findings and recommendations for future research.

Process simulation support in BPM tools: The case of BPMN

Due to the increasing acceptance of BPM, nowadays BPM tools are extensively used in organizations. Core to BPM are the process modeling languages, of which BPMN is the one that has been receiving most attention these days. Once a business process is described using BPMN, one can use a process simulation approach in order to find its optimized form. In this context, the simulation of business processes, such as those defined in BPMN, appears as an obvious way of improving processes. This paper analyzes the business process modeling and simulation areas, identifying the elements that must be present in the BPMN language in order to allow processes described in BPMN to be simulated. During this analysis a set of existing BPM tools, which support BPMN, are compared regarding their limitations in terms of simulation support.