Evaluation of precision time synchronisation methods for substation applications

Many substation applications require accurate time-stamping. The performance of systems such as Network Time Protocol (NTP), IRIG-B and one pulse per second (1-PPS) have been sufficient to date. However, new applications, including IEC 61850-9-2 process bus and phasor measurement, require accuracy of one microsecond or better. Furthermore, process bus applications are taking time synchronisation out into high voltage switchyards where cable lengths may have an impact on timing accuracy. IEEE Std 1588, Precision Time Protocol (PTP), is the means preferred by the smart grid standardisation roadmaps (from both the IEC and US National Institute of Standards and Technology) of achieving this higher level of performance, and integrates well into Ethernet based substation automation systems. Significant benefits of PTP include automatic path length compensation, support for redundant time sources and the cabling efficiency of a shared network. This paper benchmarks the performance of established IRIG-B and 1-PPS synchronisation methods over a range of path lengths representative of a transmission substation. The performance of PTP using the same distribution system is then evaluated and compared to the existing methods to determine if the performance justifies the additional complexity. Experimental results show that a PTP timing system maintains the synchronising performance of 1-PPS and IRIG-B timing systems, when using the same fibre optic cables, and further meets the needs of process buses in large substations.

Performance analysis of PTP components for IEC 61850 process bus applications

New substation automation applications, such as sampled value process buses and synchrophasors, require sampling accuracy of 1 µs or better. The Precision Time Protocol (PTP), IEEE Std 1588, achieves this level of performance and integrates well into Ethernet based substation networks. This paper takes a systematic approach to the performance evaluation of commercially available PTP devices (grandmaster, slave, transparent and boundary clocks) from a variety of manufacturers. The ``error budget'' is set by the performance requirements of each application. The ``expenditure'' of this error budget by each component is valuable information for a system designer. The component information is used to design a synchronization system that meets the overall functional requirements. The quantitative performance data presented shows that this testing is effective and informative. Results from testing PTP performance in the presence of sampled value process bus traffic demonstrate the benefit of a ``bottom up'' component testing approach combined with ``top down'' system verification tests. A test method that uses a precision Ethernet capture card, rather than dedicated PTP test sets, to determine the Correction Field Error of transparent clocks is presented. This test is particularly relevant for highly loaded Ethernet networks with stringent timing requirements. The methods presented can be used for development purposes by manufacturers, or by system integrators for acceptance testing. A sampled value process bus was used as the test application for the systematic approach described in this paper. The test approach was applied, components were selected, and the system performance verified to meet the application's requirements. Systematic testing, as presented in this paper, is applicable to a range of industries that use, rather than develop, PTP for time transfer.

Assessment of real-time networks and timing for process bus applications

Widespread adoption by electricity utilities of Non-Conventional Instrument Transformers, such as optical or capacitive transducers, has been limited due to the lack of a standardised interface and multi-vendor interoperability. Low power analogue interfaces are being replaced by IEC 61850 9 2 and IEC 61869 9 digital interfaces that use Ethernet networks for communication. These ‘process bus’ connections achieve significant cost savings by simplifying connections between switchyard and control rooms; however the in-service performance when these standards are employed is largely unknown. The performance of real-time Ethernet networks and time synchronisation was assessed using a scale model of a substation automation system. The test bed was constructed from commercially available timing and protection equipment supplied by a range of vendors. Test protocols have been developed to thoroughly evaluate the performance of Ethernet networks and network based time synchronisation. The suitability of IEEE Std 1588 Precision Time Protocol (PTP) as a synchronising system for sampled values was tested in the steady state and under transient conditions. Similarly, the performance of hardened Ethernet switches designed for substation use was assessed under a range of network operating conditions. This paper presents test methods that use a precision Ethernet capture card to accurately measure PTP and network performance. These methods can be used for product selection and to assess ongoing system performance as substations age. Key findings on the behaviour of multi-function process bus networks are presented. System level tests were performed using a Real Time Digital Simulator and transformer protection relay with sampled value and Generic Object Oriented Substation Events (GOOSE) capability. These include the interactions between sampled values, PTP and GOOSE messages. Our research has demonstrated that several protocols can be used on a shared process bus, even with very high network loads. This should provide confidence that this technology is suitable for transmission substations.

Very thin yttrium barium copper oxide films made by coevaporation

Superconducting YBa2Cu3O7 thin films with various thicknesses from 100 Å to 5000 Å were deposited on (100) SrTiO3 substrates with std. BaF2 coevaporation process. The films had crit. temps. of up to 93 K. The best crit. currents were 1 × 106 A/cm2 at 77 K and 3 × 107 A/cm2 at 4.2 K. The crit. current was generally higher for thinner films. Two different etching methods were used to pattern the films for jc measurements: Ar ion etching and EDTA wet etching. The wet etching was found to work well for thicker films (>1000 Å). For the thinner films, the ion etching process was preferred because of the reduced film surface degrdn. [on SciFinder(R)]

Topic dependent language modelling for spoken term detection

This paper investigates the effect of topic dependent language models (TDLM) on phonetic spoken term detection (STD) using dynamic match lattice spotting (DMLS). Phonetic STD consists of two steps: indexing and search. The accuracy of indexing audio segments into phone sequences using phone recognition methods directly affects the accuracy of the final STD system. If the topic of a document in known, recognizing the spoken words and indexing them to an intermediate representation is an easier task and consequently, detecting a search word in it will be more accurate and robust. In this paper, we propose the use of TDLMs in the indexing stage to improve the accuracy of STD in situations where the topic of the audio document is known in advance. It is shown that using TDLMs instead of the traditional general language model (GLM) improves STD performance according to figure of merit (FOM) criteria.

Phonetic spoken term search using topic information

The aim of spoken term detection (STD) is to find all occurrences of a specified query term in a large audio database. This process is usually divided into two steps: indexing and search. In a previous study, it was shown that knowing the topic of an audio document would help to improve the accuracy of indexing step which results in a better performance for STD system. In this paper, we propose the use of topic information not only in the indexing step, but also in the search step. Results of our experiments show that topic information could also be used in search step to improve the STD accuracy.

Acoustic adaptation in cross database audio visual SHMM training for phonetic spoken term detection

Visual information in the form of lip movements of the speaker has been shown to improve the performance of speech recognition and search applications. In our previous work, we proposed cross database training of synchronous hidden Markov models (SHMMs) to make use of external large and publicly available audio databases in addition to the relatively small given audio visual database. In this work, the cross database training approach is improved by performing an additional audio adaptation step, which enables audio visual SHMMs to benefit from audio observations of the external audio models before adding visual modality to them. The proposed approach outperforms the baseline cross database training approach in clean and noisy environments in terms of phone recognition accuracy as well as spoken term detection (STD) accuracy.

Incorporating visual information for spoken term detection

Spoken term detection (STD) is the task of looking up a spoken term in a large volume of speech segments. In order to provide fast search, speech segments are first indexed into an intermediate representation using speech recognition engines which provide multiple hypotheses for each speech segment. Approximate matching techniques are usually applied at the search stage to compensate the poor performance of automatic speech recognition engines during indexing. Recently, using visual information in addition to audio information has been shown to improve phone recognition performance, particularly in noisy environments. In this paper, we will make use of visual information in the form of lip movements of the speaker in indexing stage and will investigate its effect on STD performance. Particularly, we will investigate if gains in phone recognition accuracy will carry through the approximate matching stage to provide similar gains in the final audio-visual STD system over a traditional audio only approach. We will also investigate the effect of using visual information on STD performance in different noise environments.

Improving spoken term detection using complementary information

This research has made contributions to the area of spoken term detection (STD), defined as the process of finding all occurrences of a specified search term in a large collection of speech segments. The use of visual information in the form of lip movements of the speaker in addition to audio and the use of topic of the speech segments, and the expected frequency of words in the target speech domain, are proposed. By using these complementary information, improvement in the performance of STD has been achieved which enables efficient search of key words in large collection of multimedia documents.

Pulse-echo ultrasound transit time spectroscopy: A comparison of experimental measurements and simulation prediction

Considering ultrasound propagation through complex composite media as an array of parallel sonic rays, a comparison of computer simulated prediction with experimental data has previously been reported for transmission mode (where one transducer serves as transmitter, the other as receiver) in a series of ten acrylic step-wedge samples, immersed in water, exhibiting varying degrees of transit time inhomogeneity. In this study, the same samples were used but in pulse-echo mode, where the same ultrasound transducer served as both transmitter and receiver, detecting both ‘primary’ (internal sample interface) and ‘secondary’ (external sample interface) echoes. A transit time spectrum (TTS) was derived, describing the proportion of sonic rays with a particular transit time. A computer simulation was performed to predict the transit time and amplitude of various echoes created, and compared with experimental data. Applying an amplitude-tolerance analysis, 91.7±3.7% of the simulated data was within ±1 standard deviation (STD) of the experimentally measured amplitude-time data. Correlation of predicted and experimental transit time spectra provided coefficients of determination (R2) ranging from 100.0% to 96.8% for the various samples tested. The results acquired from this study provide good evidence for the concept of parallel sonic rays. Further, deconvolution of experimental input and output signals has been shown to provide an effective method to identify echoes otherwise lost due to phase cancellation. Potential applications of pulse-echo ultrasound transit time spectroscopy (PE-UTTS) include improvement of ultrasound image fidelity by improving spatial resolution and reducing phase interference artefacts.

Estudio diacrónico comparativo de los usos y la semántica de la preposición DE en dos novelas españolas: Libro del caballero Zifar y El ingenioso hidalgo don Quijote de la Mancha

Prepositioner är välkända för sin polysemi eller betydelsemångfald, och utgångspunkten för den här uppsatsen har varit ett intresse av att undersöka om det är möjligt att för en av de mest mångtydiga spanska prepositionerna, DE, finna en sammanhängande semantisk struktur, eller om det är nödvändigt att se de olika betydelserna som inbördes orelaterade. För att utreda den här frågan och ge den ett diakroniskt perspektiv undersöker jag i den här uppsatsen användningen av den spanska prepositionen DE i två romaner ur den spanska litteraturhistorien, Libro del caballero Zifar och El ingenioso hidalgo don Quijote de la Mancha, del I. Uppsatsen består av tre delar. I kapitel två ger jag en teoretisk översikt över spanskans prepositionssystem och prepositionerna beskrivs både ur syntaktisk och semantisk synvinkel. Dessutom presenteras den kognitiva grammatiken och dess synsätt på prepositioner. Huvuddelen av arbetet koncentrerar sig på att presentera prepositionen DE på två sätt och enligt två skilda metoder. I kapitel tre presenteras de olika kontextuella användningarna av DE enligt den traditionella, historisk-komparativa metoden. Med utgångspunkt i dessa kontextuella användningar ställer jag i kapitel fyra med stöd av den kognitiva grammatikens begreppssystem upp en semantisk nätverksmodell av de olika betydelser som jag fastställt för DE i den funktionella analysen. För den semantiska beskrivningen har jag använt mig av den kognitiva grammatiken, eftersom denna grammatikuppfattning i motsats till den traditionella grammatiken ser polysemin som regel och utgångspunkt i den semantiska strukturen. Analysdelen av uppsatsen inleds med den funktionella presentationen av användningarna av DE av två grundläggande skäl: För det första anser jag det ändamålsenligt att för den semantiska beskrivningen ha en solid bas av exempel där användningen av DE analyserats med hänsyn till kontexten. Kapitel tre är därför indelat i fyra huvuddelar, enligt vilken ordklass DEs huvudord tillhör, t.ex.: substantiv, adjektiv, verb. I exemplen i den fjärde gruppen fungerar prepositionsfrasen som inleds av DE som en mer fristående bestämning på frasnivå, där huvudordets ordklasstillhörighet inte är av avgörande betydelse. För det andra utgår jag från att en viss utveckling av DE har skett under de 300 år som tidsmässigt skiljer de båda romanerna åt, både vad gäller dess användning och dess semantik. För att komma underfund med och beskriva utsträckningen hos denna utveckling är det nödvändigt att den komparativa delen presenteras innan den semantiska beskrivningen kan inledas. Resultaten av den komparativa analysen är att ett antal smärre skillnader i användningen förekommer, men detta till trots har ingen betydande semantisk utveckling kunnat iakttas. Detta innebär att den semantiska beskrivningen av DE kan göras utifrån ett relativt enhetligt material. Jag har följaktligen också kunnat ställa upp en enhetlig semantisk nätverksmodell av tolv olika, relaterade betydelser hos DE. Utgående från mitt material är det sålunda möjligt att se DEs polysemi som ett sammanhängande nätverk, trots att vissa av betydelserna kan verka sinsemellan motstridiga och att 300 år skiljer åt de två böckerna. Nyckelord: prepositioner, DE: semantik och användning, polysemi, kognitiv grammatik, diakroni

En förutbestämd sanning : Barnamord och delaktighet i 1700-talets Finland belysta genom kön, kropp och social kontroll

The study analyses the prevention or endorsing of the crime of infanticide in Finland 1702 1807, rather than the result. Also the impacts of the female body, biology of childbirth and experiences of pregnancy are examined, together with insights from modern medical research. Circumstances are reconstructed by a critical reading of judicial records on all levels of the judicial system. In all 269 cases of infanticide and 142 accessory crimes within the jurisdiction of the Turku court of appeal are studied, with particular focus on exceptionally well recorded cases of 83 accused women and 41 women and men accused of being party to the crime. Secondary sources are medical and jurisprudential writings, the public debate on infanticide, broadsheets and letters asking the King for pardon. Infanticide was considered murder by law. Unmarried women were predetermined as the main culprits. Nevertheless, deliberate infanticides were rare and committed mostly in accomplice. The majority of the infanticides studied were cases where inexperienced and unmarried women accidentally had given birth alone and usually to a dead child. Unaware that the pain they were experiencing was in fact a labour, the accused women instinctively sought solitude to push out the child. Some misunderstood the birth as an urgent need to defecate. The unexpected delivery ended in hiding the baby without remorse. This crime was promoted by several factors in Finnish rural culture, amongst others that also married women hid their pregnancy. The immediate household members did not necessarily know about the childbirth and failed to help the woman. This typical pattern in most cases of infanticide in 18th century Finland is also recorded in modern cases of unknown pregnancies. Fear of accountability prevented witnesses testifying to the actual course of events. The truth remained elusive. With only a few exceptions, the women were sentenced to death or imprisonment. The majority of those accused of accomplice were acquitted. However, too harsh sentences for accidents affected the reporting of the crime. Criminal politics failed to curtail infanticide as the crime was unsatisfactorily addressed by law, society and the judicial system.

I konstens namn - scenen som arbetsmiljö : Arbetsplatsmobbning ur skådespelarperspektiv

Workplace bullying is a topic of current interest in Finland. Workplace bullying is found in all professions, including the artistic ones. This thesis aims to explore workplace bullying from the view of the Finland-Swedish actors as a phenomenon that within dramatic art is difficult to define due to the fact that the body and emotions of an actor constitute his or her working tools. The research aims to deepen the understanding of the actors’ working situation, and particularly of the difficulties and problems actors face when exercising their job. The research problems are: What forms of bullying are the actors exposed to? Who is bullying? How is the bullying received by the actors, and what are the possible consequences? The theoretical orientation of this thesis is based upon dialogical philosophy where phenomenology, hermeneutics and dialog meet in an orientation where the unseen is emphasized and made visible. Artistic leadership should be based upon a pedagogic understanding that by an open and equal dialog with the Other recognizes human diversity. The narrative research was undertaken by using an interview guide for the interviews with eleven actors, six women and five men with the voice of a sixth man represented by an article. The interviews, each on average 118 minutes, were recorded and transcribed. The method of discursive analysis was initiated by numerous reflective readings based on analytic induction. The inductive part of the analysis consisted of mapping out the individual experiences of bullying where after the process of finding connecting common features in the extensive material took place. The coded data was then deductively grouped together according to the research problems, and subgroups were formed for deeper description. The research findings show that workplace bullying is an everyday occurrence within the field of dramatic art. Actors are bullied by theatre managers and directors as well as by colleagues and other personnel. The main areas of bullying is depreciation of one’s professional skills, the existing jargon, sexual harassment, collective bullying and bullying because of personal qualities. A significant finding concerning this problem was the existing culture of silence. Even if actually seeing and hearing a colleague being bullied, few stood up to defend the person being bullied because of fear of retaliation. Even the person actually being the object for bullying found it difficult to take any actions.

Datorstödda studier i hälso- och socialvård : MuPSiNet-projektet

The aim of the study was to explore why the MuPSiNet project - a computer and network supported learning environment for the field of health care and social work - did not develop as expected. To grasp the problem some hypotheses were formulated. The hypotheses regarded the teachers' skills in and attitudes towards computing and their attitudes towards constructivist study methods. An online survey containing 48 items was performed. The survey targeted all the teachers within the field of health care and social work in the country, and it produced 461 responses that were analysed against the hypotheses. The reliability of the variables was tested using the Cronbach alpha coefficient and t-tests. Poor basic computing skills among the teachers combined with a vulnerable technical solution, and inadequate project management combined with lack of administrative models for transforming economic resources into manpower were the factors that turned out to play a decisive role in the project. Other important findings were that the teachers had rather poor skills and knowledge in computing, computer safety and computer supported instruction, and that these skills were significantly poorer among female teachers who were in majority in the sample. The fraction of teachers who were familiar with software for electronic patient records (EPR) was low. The attitudes towards constructivist teaching methods were positive, and further education seemed to utterly increase the teachers' readiness to use alternative teaching methods. The most important conclusions were the following: In order to integrate EPR software as a natural tool in teaching planning and documenting health care, it is crucial that the teachers have sufficient basic skills in computing and that more teachers have personal experience of using EPR software. In order for computer supported teaching to become accepted it is necessary to arrange with extensive further education for the teachers presently working, and for that further education to succeed it should be backed up locally among other things by sufficient support in matters concerning computer supported teaching. The attitudes towards computing showed significant gender differences. Based on the findings it is suggested that basic skills in computing should also include an awareness of data safety in relation to work in different kinds of computer networks, and that projects of this kind should be built up around a proper project organisation with sufficient resources. Suggestions concerning curricular development and further education are also presented. Conclusions concerning the research method were that reminders have a better effect, and that respondents tend to answer open-ended questions more verbosely in electronically distributed online surveys compared to traditional surveys. A method of utilising randomized passwords to guarantee respondent anonymity while maintaining sample control is presented. Keywords: computer-assisted learning, computer-assisted instruction, health care, social work, vocational education, computerized patient record, online survey

Intensity, productivity and efficiency in agriculture in Finland and implications for N and P fertiliser management

The purpose of this study was to evaluate intensity, productivity and efficiency in agriculture in Finland and show implications for N and P fertiliser management. Environmental concerns relating to agricultural production have been and still are focused on arguments about policies that affect agriculture. These policies constrain production while demand for agricultural products such as food, fibre and energy continuously increase. Therefore the importance of increasing productivity is a great challenge to agriculture. Over the last decades producers have experienced several large changes in the production environment such as the policy reform when Finland joined the EU 1995. Other and market changes occurred with the further EU enlargement with neighbouring countries in 2005 and with the decoupling of supports over the 2006-2007 period. Decreasing prices a decreased number of farmers and decreased profitability in agricultural production have resulted from these changes and constraints and of technological development. It is known that the accession to the EU 1995 would herald changes in agriculture. Especially of interest was how the sudden changes in prices of commodities on especially those of cereals, decreased by 60%, would influence agricultural production. The knowledge of properties of the production function increased in importance as a consequence of price changes. A research on the economic instruments to regulate productions was carried out and combined with earlier studies in paper V. In paper I the objective was to compare two different technologies, the conventional farming and the organic farming, determine differences in productivity and technical efficiency. In addition input specific or environmental efficiencies were analysed. The heterogeneity of agricultural soils and its implications were analysed in article II. In study III the determinants of technical inefficiency were analysed. The aspects and possible effects of the instability in policies due to a partial decoupling of production factors and products were studied in paper IV. Consequently connection between technical efficiency based on the turnover and the sales return was analysed in this study. Simple economic instruments such as fertiliser taxes have a direct effect on fertiliser consumption and indirectly increase the value of organic fertilisers. However, fertiliser taxes, do not fully address the N and P management problems adequately and are therefore not suitable for nutrient management improvements in general. Productivity of organic farms is lower on average than conventional farms and the difference increases when looking at selling returns only. The organic sector needs more research and development on productivity. Livestock density in organic farming increases productivity, however, there is an upper limit to livestock densities on organic farms and therefore nutrient on organic farms are also limited. Soil factors affects phosphorous and nitrogen efficiency. Soils like sand and silt have lower input specific overall efficiency for nutrients N and P. Special attention is needed for the management on these soils. Clay soils and soils with moderate clay content have higher efficiency. Soil heterogeneity is cause for an unavoidable inefficiency in agriculture.