Performance Analysis of IP based WSNs in real time systems

Wireless sensor networks (WSNs) are the key enablers of the internet of things (IoT) paradigm. Traditionally, sensor network research has been to be unlike the internet, motivated by power and device constraints. The IETF 6LoWPAN draft standard changes this, defining how IPv6 packets can be efficiently transmitted over IEEE 802.15.4 radio links. Due to this 6LoWPAN technology, low power, low cost micro- controllers can be connected to the internet forming what is known as the wireless embedded internet. Another IETF recommendation, CoAP allows these devices to communicate interactively over the internet. The integration of such tiny, ubiquitous electronic devices to the internet enables interesting real-time applications. This thesis work attempts to evaluate the performance of a stack consisting of CoAP and 6LoWPAN over the IEEE 802.15.4 radio link using the Contiki OS and Cooja simulator, along with the CoAP framework Californium (Cf). Ultimately, the implementation of this stack on real hardware is carried out using a raspberry pi as a border router with T-mote sky sensors as slip radios and CoAP servers relaying temperature and humidity data. The reliability of the stack was also demonstrated during scalability analysis conducted on the physical deployment. The interoperability is ensured by connecting the WSN to the global internet using different hardware platforms supported by Contiki and without the use of specialized gateways commonly found in non IP based networks. This work therefore developed and demonstrated a heterogeneous wireless sensor network stack, which is IP based and conducted performance analysis of the stack, both in terms of simulations and real hardware.

Fundamentals for the Development of a Performance Analysis Approach in Collaborative Networks

Part 15: Performance Management Frameworks

Performance analysis of brazilian public and philanthropic hospitals

This paper presents the results of a research that aimed at identifying optimal performance standards of Brazilian public and philanthropic hospitals. In order to carry out the analysis, a model based on Data Envelopment Analysis (DEA) was developed. We collected financial data from hospitals’ financial statements available on the internet, as well as operational data from the Information Technology Department of the Brazilian Public Health Care System – SUS (DATASUS). Data from 18 hospitals from 2007 to 2011 were analyzed. Our DEA model used both operational and financial indicators (variables). In order to develop this model, two indicators were considered inputs: Values (in Brazilian Reais) of Fixed Assets and Planned Capacity. On the other hand, the following indicators were considered outputs: Net Margin, Return on Assets and Institutional Mortality Rate. As regards the proposed model, there were five hospitals with optimal performance and four hospitals were considered inefficient, upon the analysis of the variables, considering the analyzed period. Analysis of the weights indicated the most relevant variables for determining efficiency and scale variable values, which is an important tool to aid the decision-making by hospital managers. Finally, the scale variables determined the returns on production, indicating that 14 hospitals work with scale diseconomies. This may indicate inefficiency in the resource management of the Brazilian public health-care system, by analyzing this set of proposed variables.

Contributions to the performance analysis of continuum parallel robots

Continuum parallel robots (CPRs) are manipulators employing multiple flexible beams arranged in parallel and connected to a rigid end-effector. CPRs promise higher payload and accuracy than serial CRs while keeping great flexibility. As the risk of injury during accidental contacts between a human and a CPR should be reduced, CPRs may be used in large-scale collaborative tasks or assisted robotic surgery. There exist various CPR designs, but the prototype conception is rarely based on performance considerations, and the CPRs realization in mainly based on intuitions or rigid-link parallel manipulators architectures. This thesis focuses on the performance analysis of CPRs, and the tools needed for such evaluation, such as workspace computation algorithms. In particular, workspace computation strategies for CPRs are essential for the performance assessment, since the CPRs workspace may be used as a performance index or it can serve for optimal-design tools. Two new workspace computation algorithms are proposed in this manuscript, the former focusing on the workspace volume computation and the certification of its numerical results, while the latter aims at computing the workspace boundary only. Due to the elastic nature of CPRs, a key performance indicator for these robots is the stability of their equilibrium configurations. This thesis proposes the experimental validation of the equilibrium stability assessment on a real prototype, demonstrating limitations of some commonly used assumptions. Additionally, a performance index measuring the distance to instability is originally proposed in this manuscript. Differently from the majority of the existing approaches, the clear advantage of the proposed index is a sound physical meaning; accordingly, the index can be used for a more straightforward performance quantification, and to derive robot specifications.

Satellite IoT: a Study and Performance Analysis of GEO and LEO Systems

The study is divided into two main part: one focused on the GEO Satellite IoT and the other on the LEO Satellite IoT. Concerning the GEO Satellite IoT, the activity has been developed in the context of EUMETSAT Data Collection Service (DCS) by investigating the performance at the receiver within challenging scenarios. DCS are provided by several GEO Satellite operators, giving almost total coverage around the world. In this study firstly an overview of the DCS end-to-end architecture is given followed by a detailed description of both the tools used for the simulations: the DCP-TST (message generator and transmitter) and the DCP-RX (receiver). After generating several test messages, the performances have been evaluated with the addition of impairments (CW and sweeping interferences) and considerations in terms of BER and Good Messages are produced. Furthermore, a study on the PLL System is also conducted together with evaluations on the effectiveness of tuning the PLL Bw on the overall performance. Concerning the LEO Satellite IoT, the activity was carried out in the framework of the ASI Bidirectional IoT Satellite Service (BISS) Project. The elaborate covers a survey about the possible services that the project can accomplish and a technical analysis on the uplink MA. In particular, the LR-FHSS is proved to be a valid alternative for the uplink through an extensive analysis on its Network capacity and through the study of an analytic model for Success Probability with its Matlab implementation.

Performance analysis of different sensing techniques in Cognitive Radio Networks.

The spectrum of radiofrequency is distributed in such a way that it is fixed to certain users called licensed users and it cannot be used by unlicensed users even though the spectrum is not in use. This inefficient use of spectrum leads to spectral holes. To overcome the problem of spectral holes and increase the efficiency of the spectrum, Cognitive Radio (CR) was used and all simulation work was done on MATLAB. Here analyzed the performance of different spectrum sensing techniques as Match filter based spectrum sensing and energy detection, which depend on various factors, systems such as Numbers of input, signal-to-noise ratio ( SNR Ratio), QPSK system and BPSK system, and different fading channels, to identify the best possible channels and systems for spectrum sensing and improving the probability of detection. The study resulted that an averaging filter being better than an IIR filter. As the number of inputs and SNR increased, the probability of detection also improved. The Rayleigh fading channel has a better performance compared to the Rician and Nakagami fading channel.

A performance analysis of mesh models for cloud-based workflows

Nell'ambito della loro trasformazione digitale, molte organizzazioni stanno adottando nuove tecnologie per supportare lo sviluppo, l'implementazione e la gestione delle proprie architetture basate su microservizi negli ambienti cloud e tra i fornitori di cloud. In questo scenario, le service ed event mesh stanno emergendo come livelli infrastrutturali dinamici e configurabili che facilitano interazioni complesse e la gestione di applicazioni basate su microservizi e servizi cloud. L’obiettivo di questo lavoro è quello di analizzare soluzioni mesh open-source (istio, Linkerd, Apache EventMesh) dal punto di vista delle prestazioni, quando usate per gestire la comunicazione tra applicazioni a workflow basate su microservizi all’interno dell’ambiente cloud. A questo scopo è stato realizzato un sistema per eseguire il dislocamento di ognuno dei componenti all’interno di un cluster singolo e in un ambiente multi-cluster. La raccolta delle metriche e la loro sintesi è stata realizzata con un sistema personalizzato, compatibile con il formato dei dati di Prometheus. I test ci hanno permesso di valutare le prestazioni di ogni componente insieme alla sua efficacia. In generale, mentre si è potuta accertare la maturità delle implementazioni di service mesh testate, la soluzione di event mesh da noi usata è apparsa come una tecnologia ancora non matura, a causa di numerosi problemi di funzionamento.

Performance Analysis of Topological Quantum Error Correcting Codes

In the last few years there has been a great development of techniques like quantum computers and quantum communication systems, due to their huge potentialities and the growing number of applications. However, physical qubits experience a lot of nonidealities, like measurement errors and decoherence, that generate failures in the quantum computation. This work shows how it is possible to exploit concepts from classical information in order to realize quantum error-correcting codes, adding some redundancy qubits. In particular, the threshold theorem states that it is possible to lower the percentage of failures in the decoding at will, if the physical error rate is below a given accuracy threshold. The focus will be on codes belonging to the family of the topological codes, like toric, planar and XZZX surface codes. Firstly, they will be compared from a theoretical point of view, in order to show their advantages and disadvantages. The algorithms behind the minimum perfect matching decoder, the most popular for such codes, will be presented. The last section will be dedicated to the analysis of the performances of these topological codes with different error channel models, showing interesting results. In particular, while the error correction capability of surface codes decreases in presence of biased errors, XZZX codes own some intrinsic symmetries that allow them to improve their performances if one kind of error occurs more frequently than the others.

Design and Performance Analysis of the Electrical Power System of a Petrochemical Facility

This thesis deals with the sizing and analysis of the electrical power system of a petrochemical plant. The activity was carried out in the framework of an electrical engineering internship. The sizing and electrical calculations, as well as the study of the dynamic behavior of network quantities, are accomplished by using the ETAP (Electrical Transient Analyzer Program) software. After determining the type and size of the loads, the calculation of power flows is carried out for all possible network layout and different power supply configurations. The network is normally operated in a double radial configuration. However, the sizing must be carried out taking into account the most critical configuration, i.e., the temporary one of single radial operation, and also considering the most unfavorable power supply conditions. The calculation of shortcircuit currents is then carried out and the appropriate circuit breakers are selected. Where necessary, capacitor banks are sized in order to keep power factor at the point of common coupling within the preset limits. The grounding system is sized by using the finite element method. For loads with the highest level of criticality, UPS are sized in order to ensure their operation even in the absence of the main power supply. The main faults that can occur in the plant are examined, determining the intervention times of the protections to ensure that, in case of failure on one component, the others can still properly operate. The report concludes with the dynamic and stability analysis of the power system during island operation, in order to ensure that the two gas turbines are able to support the load even during transient conditions.

Considering Target Groups in the Creation of a Comprehensive City Branding Process

The aim of the research was to create a comprehensive city branding process. This was done by identifying the key target groups of the city and considering them in the city branding process. Also key stakeholders were identified and taken into consideration when creating the branding process. As an empirical study, three first stages of the city branding process were implemented for the city of Lappeenranta having "students" as the case target group. An interview with the city officials was conducted, as well as a student survey on the current city image of Lappeenranta. Quantitative research methods were used to analyze the results of the survey. A comprehensive city branding process with eight stages was created in the research. Target groups were considered in the process by identifying the target group dependent stages. The empirical study revealed that the current city image held by the students consists of six dimensions. These dimensions were analyzed from the viewpoint of Lappeenranta with the help of an importance performance analysis.

Coaching SME managers: business development or personal therapy? A mixed methods study

While a growing number of small- and medium-sized enterprises (SMEs) are making use of coaching, little is known about the impact such coaching has within this sector. This study sought to identify the factors that influence managers' decision to engage with coaching, their perceptions of the coaching ‘journey’ and the kinds of benefits accruing from coaching: organisational, personal or both. As part of a mixed methods approach, a survey tool was developed based upon a range of relevant management competencies from the UK's Management Occupational Standards and responses analysed using importance-performance analysis, an approach first used in the marketing sector to evaluate customer satisfaction. Results indicate that coaching had a significant impact on personal attributes such as ‘Managing Self-Cognition’ and ‘Managing Self-Emotional’, whereas the impact on business-oriented attributes was weaker. Managers' choice of coaches with psychotherapeutic rather than non-psychotherapeutic backgrounds was also statistically significant. We conclude that even in the competitive business environment of SMEs, coaching was used as a largely personal, therapeutic intervention rather than to build business-oriented competencies.

Supply chain management resources, capabilities and execution

This paper identifies inter- and intra-organisational management resources that determine the level of execution of inter-firm alliance supply chain management (SCM). By drawing on network and resource-based view theories, a conceptual model proposes the effects of SCM resources and capabilities as influencing factors on SCM execution. The model was tested using survey data from studies conducted in two European supply chain environments. Variance-based structural equation modelling confirmed the hypothesised hierarchical order of three proposed antecedents: internal SCM resources affect joint SCM resources, which in turn influence collaborative SCM-related processes and finally SCM execution. An importance-performance analysis for both settings shows that providing and investing in internal SCM resources should be a priority when aiming to increase SCM execution. The theoretical contribution of this paper lies in confirming that the improvement of SCM execution follows a clear pathway featuring internal supply chain resources as one of the main drivers. The practical implications of this research include the development of a prioritisation list of measures that elevate SCM execution in the two country settings. © 2014 © 2014 Taylor & Francis.

Fontosság-teljesítmény illeszkedés a termelési stratégiában és hatása az üzleti teljesítményre – statikus megközelítés

A termelési stratégia kutatásának mindig meghatározó területe volt, hogy miként tud a termelési stratégia hozzájárulni a vállalat termelési és üzleti teljesítményéhez. A kapcsolódó szakirodalom áttekintése alapján amellett érvelünk, hogy a termelési stratégia javítása érdekében a vállalatoknak egyaránt figyelembe kell venniük, hogy a) egy adott termelési képesség mennyire fontos a vevő számára és b) a vállalat hogyan teljesít az adott területen a versenytársakhoz képest. E két szempontot összekapcsolva ckkünk a fontosság-teljesítmény elemzést használja, ami a korábbi tanulmányoknál kifinomultabb operacionalizálást tesz lehetővé. A vizsgálathoz egy 21 országra kiterjedő, 725 vállalat adatait tartalmazó nemzetközi adatbázist használunk. Az eredmények azt sugallják, hogy a fontosság-teljesítmény logika javasolt alkalmazása jelentősen képes hozzájárulni az üzleti teljesítményhez. Tanulmányunk gyakorlati útmutatóval is szolgál a termelési stratégia döntéshozóinak arra, hogy miként érdemes a termelésfejlesztési projektek közül választani úgy, hogy ezáltal üzleti teljesítményüket is javítani tudják. ______ A key area of operations management research has always been the determination of how manufacturing strategy can contribute to a firm’s operational and business performance. After reviewing relevant literature, we argue that in improving manufacturing strategy, both the importance for the customer of a particular manufacturing capability and the firm’s current performance relative to competitors must be considered. Consequently, our research builds upon an importance-performance analysis approach, which allows for a more refined operationalization of the concept of importance-performance fit than previous studies. To investigate the link between importance-performance fit and business performance, we use an international sample of 725 manufacturing companies from 21 countries. The results of our analysis suggest that improvement decisions that follow the proposed importance-performance logic can significantly contribute to the firm’s business performance. Our study also offers practical guidance for manufacturing strategy decision makers on how to prioritize between improvement projects to positively contribute to business performance.

Dive Tourism: Evaluating Service Quality

Through the application of importance- performance analysis (/PA), the author investigated the conceptualization and measurement of service quality for tour operators in the scuba diving industry Findings from a study of consumer perceptions of service quality as they relate to a dive tour operator in Western Australia revealed the core service quality dimensions hat need to be improved for the operator and demonstrated the values and relative simplicity of the importance-performance analyses for dive tour operators generally

Evaluación de la calidad de un servicio de voluntariado en oncología: un Análisis Importancia-Valoración (IPA)

Objective: Using an Importance-Performance Analysis (IPA), this paper examined a Radiotherapy and Oncological Patient and Non-patient perceived importance and performance of ten Humanization Volunteer Program selection factors in the General Hospital in Spain.Methods: The authors identified a list of seven items from the Health-marketing literature reviews, and each item was rated using a 5-point Likert scale. Responses were obtained of 148 usable interviews.Results: The importance-performance patient grid was corrected with literature recommendations and, in the patient sample, shows three items fall in the “Keep up the good work” quadrant, four items fall into the “Low priority” quadrant, zero items fall into the “Possible overkill” quadrant, and no items fall in the “Concentrate here” quadrant. Non-patient (n=80) factors means shows statistical differences with patient (n=68) means in catering (t=-2.38; df.=146; p<0.05), and information (t=2.16; df146; p<0,05).Conclusions: The results are useful in identifying areas for strategic focus to help Health Services managers develop humanization programs with volunteer workers and different program users. Implication to volunteer programs managers and researchers were discussed.