Geofluid behaviour in successive extensional and compressional events: a case study from the southwestern end of the Vallès-Penedès Fault (Catalan Coastal Ranges, NE Spain)

The structural position of the Upper Jurassic-Lower Cretaceous carbonates located in the central part of the Catalan Coastal Ranges corresponds to the southwestern end of the Vallès-Penedès Fault. This fault was reactivated at different times during successive extensional and compressional events and several generations of fractures and cementations were formed.

Predicting diffusion of innovations with self-organisation and machine learning

The main subject of this master's thesis was predicting diffusion of innovations. The prediction was done in a special case: product has been available in some countries, and based on its diffusion in those countries the prediction is done for other countries. The prediction was based on finding similar countries with Self-Organizing Map~(SOM), using parameters of countries. Parameters included various economical and social key figures. SOM was optimised for different products using two different methods: (a) by adding diffusion information of products to the country parameters, and (b) by weighting the country parameters based on their importance for the diffusion of different products. A novel method using Differential Evolution (DE) was developed to solve the latter, highly non-linear optimisation problem. Results were fairly good. The prediction method seems to be on a solid theoretical foundation. The results based on country data were good. Instead, optimisation for different products did not generally offer clear benefit, but in some cases the improvement was clearly noticeable. The weights found for the parameters of the countries with the developed SOM optimisation method were interesting, and most of them could be explained by properties of the products.

Paediatric end-of-life care needs in Switzerland: current practices, and perspectives from parents and professionals. A study protocol.

AIM: To present a protocol for a multi-phase study about the current practice of end-of-life care in paediatric settings in Switzerland. BACKGROUND: In Switzerland, paediatric palliative care is usually provided by teams, who may not necessarily have specific training. There is a lack of systematic data about specific aspects of care at the end of a child's life, such as symptom management, involvement of parents in decision-making and family-centred care and experiences and needs of parents, and perspectives of healthcare professionals. DESIGN: This retrospective nationwide multicentre study, Paediatric End-of-LIfe CAre Needs in Switzerland (PELICAN), combines quantitative and qualitative methods of enquiry. METHODS: The PELICAN study consists of three observational parts, PELICAN I describes practices of end-of-life care (defined as the last 4 weeks of life) in the hospital and home care setting of children (0-18 years) who died in the years 2011-2012 due to a cardiac, neurological or oncological disease, or who died in the neonatal period. PELICAN II assesses the experiences and needs of parents during the end-of-life phase of their child. PELICAN III focuses on healthcare professionals and explores their perspectives concerning the provision of end-of-life care. CONCLUSION: This first study across Switzerland will provide comprehensive insight into the current end-of-life care in children with distinct diagnoses and the perspectives of affected parents and health professionals. The results may facilitate the development and implementation of programmes for end-of-life care in children across Switzerland, building on real experiences and needs. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT01983852.

Development and initial validation of the Parental PELICAN Questionnaire (PaPEQu) - an instrument to assess parental experiences and needs during their child's end-of-life care.

AIM: To develop and test the Parental PELICAN Questionnaire, an instrument to retrospectively assess parental experiences and needs during their child's end-of-life care. BACKGROUND: To offer appropriate care for dying children, healthcare professionals need to understand the illness experience from the family perspective. A questionnaire specific to the end-of-life experiences and needs of parents losing a child is needed to evaluate the perceived quality of paediatric end-of-life care. DESIGN: This is an instrument development study applying mixed methods based on recommendations for questionnaire design and validation. METHOD: The Parental PELICAN Questionnaire was developed in four phases between August 2012-March 2014: phase 1: item generation; phase 2: validity testing; phase 3: translation; phase 4: pilot testing. Psychometric properties were assessed after applying the Parental PELICAN Questionnaire in a sample of 224 bereaved parents in April 2014. Validity testing covered the evidence based on tests of content, internal structure and relations to other variables. RESULTS: The Parental PELICAN Questionnaire consists of approximately 90 items in four slightly different versions accounting for particularities of the four diagnostic groups. The questionnaire's items were structured according to six quality domains described in the literature. Evidence of initial validity and reliability could be demonstrated with the involvement of healthcare professionals and bereaved parents. CONCLUSION: The Parental PELICAN Questionnaire holds promise as a measure to assess parental experiences and needs and is applicable to a broad range of paediatric specialties and settings. Future validation is needed to evaluate its suitability in different cultures.

Fertilizing Methods and Nutrient Balance at the End of Traditional Organic Agriculture in the Mediterranean Bioregion: Catalonia (Spain) in the 1860s

By reconstructing the nutrient balance of a Catalan v illage circa 1861-65 we examine the sustainability of organic agricultural sy stems in the northwest Mediterranean bioregion prior to the green rev olution and the question of whether the nutrients extracted f rom the soil were replenished. With a population density of 59 inhabitants per square km, similar to other northern European rural areas at that time, and a lower liv estock density per cropland unit, this v illage experienced a manure shortage. The gap was f illed by other labour-intensiv e way s of transf erring nutrients f rom uncultiv ated areas into the cropland. Key elements in this agricultural sy stem were v iney ards because they hav e f ew nutrient requirements, and woodland and scrublands as sources of relev ant amounts of nutrients collected in sev eral ways.

Front Speed of Language Replacement

We use two coupled equations to analyze the space-time dynamics of two interacting languages. Firstly, we introduce a cohabitation model, which is more appropriate for human populations than classical (non-cohabitation) models. Secondly, using numerical simulations we nd the front speed of a new language spreading into a region where another language was previously used. Thirdly, for a special case we derive an analytical formula that makes it possible to check the validity of our numerical simulations. Finally, as an example, we nd that the observed front speed for the spread of the English language into Wales in the period 1961-1981 is consistent with the model predictions. We also nd that the e¤ects of linguistic parameters are much more important than those of parameters related to population dispersal and reproduction. If the initial population densities of both languages are similar, they have no e¤ect on the front speed. We outline the potential of the new model to analyze relationships between language replacement and genetic replacement

Evolution: the end of an ancient asexual scandal.

Bdelloid rotifers were believed to have persisted and diversified in the absence of sex. Two papers now show they exchange genes with each other, via horizontal gene transfers as known in bacteria and/or via other forms of non-canonical sex.

Innovative Culture – Searching for Innovativeness in a Construction Company

The purpose of the thesis is to study innovativeness in a context of the construction industry especially the front-end of the innovation process. The construction industry is often considered an old-fashioned manufacturing industry. Innovations and innovativeness are rarely linked to the industry. The construction industry, as well as other industries in Finland, is facing challenges such as productivity, the climate change and internationalization. The meaning of innovations is greater than ever in continuously changing markets, for standing out from competitors or increasing the competitiveness. Traditional production methods, tight building regulations, unique buildings, one-of-a-kind project organizations and highlighting the cheapest price in building contracts are particular challenges in the construction industry. The research questions of the thesis were: - What kind of factors shift the existing company culture towards innovativeness? - What are the phases of the front-end of the innovation process? - What kind of tools and methods enable managing the front-end of the innovation process? The theoretical part of the thesis bases on the literature review. The research methodology of the empirical part was the action research and qualitative approach. Empirical data was collected by the theme interviews from three companies. The results were practical methods and experiences from innovation activities of the companies. The results of the thesis can be clarified as follows: enhancement of the innovation activities requires support and commitment of the top management, innovative culture and innovation strategy. Innovativeness can be promoted by systematical methods for example collecting ideas from employees. Controlling and managing the front-end phase is essential to succeeding. Despite that managing the front-end is the most challenging part of the innovation process, development and management of that save companies’ money, resources and prevents useless investments. Further clarification and studies are needed to find out furthermore functional tools and methods to manage innovations and implementing them to the culture of the companies.

Medical students' knowledge about end-of-life decision-making

The influence of medical students' knowledge concerning end-of-life care, considering ethical theories and clinical practice, remains controversial. We aimed to investigate medical students' knowledge of bioethical concepts related to moral kinds of death (euthanasia, disthanasia, and orthothanasia) and to analyze the influence of their clinical experience on practicing such approaches in a tertiary hospital in the state of São Paulo, Brazil. We interviewed 180 medical students [distributed in Group 1 (G1) - first to third- year students, and Group 2 (G2) - fourth to sixth-year students] to evaluate the influence of the course on "medical ethics" on ethical theories and clinical practice, using a closed questionnaire. The course on "medical ethics" did not distinguish the groups (P=0.704) in relation to bioethical concepts. Neologisms such as "cacothanasia" and "idiothanasia" were incorrectly viewed as bioethical concepts by 28% of the interviewees. Moreover, 45.3% of the sample considered health care professionals incapable of managing terminally ill patients, especially G2 (29%) as compared to G1 (16.5%, P=0.031). The concept of euthanasia was accepted by 41% of sample, as compared to 98.2% for orthothanasia. Among medical students that accepted ways to abbreviate life (22.9%), 30.1% belonged to G1, and only 16.1% to G2 (P=0.049). These medical students were unfamiliar with common bioethical concepts. Moreover, they considered healthcare professionals incapable of managing terminally ill patients. The ethical ideal of the "good death" reflects better acceptance of orthothanasia by medical students, suggesting a tendency to apply it in their future clinical practice.

Utilisation of customer contacts: customer observation

Importance of customer as a source of knowledge and finding out the customer needs have both been emphasised both in business literature and in the interviews made for this study. Especially the latent customer needs are seen important for future competitiveness. However, the methods for finding out the customer needs concentrate on the present, clearly phrased needs. There is a need for rich customer based knowledge. Customer contacts are underutilised as a source of knowledge. The objective of this study is to find a method to utilise the customer contacts as a source of knowledge more efficiently. To reach this objective, the customer observation is presented. A concrete goal is the development of a general method of customer observation and its application to the needs of the case company Fastems. Fastems hopes that the method raises the amount of ideas that come to the product and service development processes and increases their customer orientation. The method is tested in practise in the piloting stage. The testing is done in service organisations of Fastems in several countries. The observations received during the piloting phase are analysed and feedback is given to the observers. An important part of the study is to find appropriate methods for motivating the observers. The successful implementation and sustenance of the method are seen as goals of high importance. Later on, the customer observation method is implemented throughout the company. The results of the piloting are promising and the described method has roused interest among other companies as well.

Innovaatioprosessin alkupään toimintamalli ja päätöksenteko

Työn tavoitteena oli tutkia innovaatioita ja organisaation innovaatiokyvykkyyttä, innovaatiokyvykkyyden taustatekijöitä sekä innovaatioprosessin alkupään (Fuzzy Front End, FFE) sekä siinä tapahtuvan päätöksenteon johtamista. Lisäksi tavoitteena oli suunnitella innovaatioprosessin alkupään toimintamalli selkeyttämään toimintaa prosessin alkupäässä sekä antaa toimenpide-ehdotuksia ja suosituksia. Tutkimuksen teoriaosuus tehtiin kirjallisuustutkimuksena. Tutkimuksen empiirinen osuus suoritettiin case -analyysinä yrityksen henkilöhaastattelu- ja toimintatutkimuksen muodossa. Innovaatioprosessin alkupäähän on tunnistettu toimintamalleja, joilla selkeytetään ja tehostetaan prosessin alkupään vaiheita. Vaiheet ovat mahdollisuuksien tunnistaminen, mahdollisuuksien analysointi, ideointi, ideoiden valitseminen ja konsepti- ja teknologiakehitys. Innovaatioprosessin rinnalla kulkee päätöksenteon prosessi, jonka suhteen tunnistetaan selkeät päätöksentekokohdat ja kriteerit prosessissa etenemiselle. Innovaatio- ja päätöksentekoprosessiin osallistuu eri vaiheissa sekä yrityksen sisäiset, kuten henkilöstö, että ulkoiset, kuten asiakkaat, toimittajat ja verkostokumppanit, sidosryhmät. Lisäksi innovaatioprosessin toimintaan vaikuttavat johdon tuki ja sitoutuminen, osallistujien kyky luovuuteen sekä muut innovaatiokyvykkyyden taustatekijät. Kaikki nämä tekijät tulee huomioida innovaatioprosessin alkupään mallia suunniteltaessa. Tutkimus tehtiin tietoliikennealan yrityksen tarpeisiin. Yrityksessä on käytössä aloitetoimintaa, mutta sen ei koeta tarjoavan riittävästi ideoita yrityksen tuotekehityksen tarpeisiin. Yrityksen henkilöstön innovaatiopotentiaali on suuri, mikä halutaan hyödyntää paremmin suunnittelemalla yrityksen käyttöön soveltuva, innovaatioprosessin alkupään toimintaan ohjaava, vakioitu ja henkilöstöä ja muita yhteistyötahoja, kuten asiakkaita, osallistava toimintamalli. Toimenpide-ehdotuksina ja suosituksina esitetään innovaatioprosessin alkupään johtamisen toimintamallia. Esitetyssä mallissa määritellään vaiheet, menetelmät, päätöksenteko ja vastuut. Toimintamalli esitetään soveltuen yhdistettäväksi yrityksessä käytössä olevaan innovaatioprosessin loppupään, tuotekehitysprojektien läpiviemisen, malliin.

Strategic external deployment of intellectual assets

Globalization, pervasiveness of technology and ICT, and the buildup of information societies and policies have lead to a growing abundance of knowledge and highly educated labour supply that is distributed widely. These changes have shifted the foundation of competitiveness to valuable knowledge resources which are now distributed widely across the globe, across actors in the value chain and across educated individuals in multiple organizations. Against this backdrop, the paradigm of open innovation (OI) has emerged as a new response to managing the increased amount of boundary-spanning knowledge flows in and out of the innovation process. The outbound mode of open innovation, that is to say the external exploitation of knowledge assets outside of the firm’s own products and services, has been the less-researched aspect of the concept and so far typically seen as concerning the outlicensing of unused technological assets to generate additional revenue. Given that open innovation is essentially a framework for the holistic structuring and management of crossboundary knowledge flows to improve a firm’s innovative performance, a close integration to corporate strategy seems imperative in order to fully benefit from it. Integrating open innovation to strategy leads to elevating its role from a fringe activity to a central innovation management issue that needs to be systematically managed. Building a structure that allows effective management necessitates linking open innovation activities to each phase of the innovation process. Previously, the connection between outbound OI and the earlier stages of innovation has not been studied. The thesis finds that connecting outbound OI to the entire innovation process of the firm, including the fuzzy front end of innovation, is critical for attaining strategic objectives and to the successful implementation and management of the activity. The practical purpose for the research is to enable companies to fully utilize their potential for outbound open innovation and to be able to implement and manage it from a strategic standpoint.

Different pathways in the larval development of the crab Ucides cordatus (Decapoda, Ocypodidae) and their relation with high mortality rates by the end of massive larvicultures

One of the most limiting factors affecting the larval rearing of Ucides cordatus in the laboratory is a period of high mortality, which usually occurs late in the course of the larviculture during the metamorphosis from the zoeal to the megalopal phase. The objective of the present research was to analyze the post-embryonic development of U. cordatus on an individual basis and, in particular, to search for patterns linking disturbances in the molting process to the high larval death rates observed in massive larvicultures. A total of 50 larvae were individually reared from hatching to metamorphosis into the megalopal phase under controlled conditions, fed a combination of microalgae and rotifers. The survivorship rate was 70% until zoea V. The 35 surviving zoea V larvae followed two different pathways. Eleven underwent metamorphosis directly to megalopa, eighteen molted to zoea VI and six died as zoea V. In the last molting event, only two zoea VI larvae reached the megalopal stage, while the remaining sixteen died. In further observation under microscope, 13 of the dead zoea VI showed characteristics of the pre-molt stage and pereiopods disproportionably large in relation to the carapace. The observed pattern resembles the Molt Death Syndrome (MDS) described for other decapod species, in which larvae die in the late pre-molt phase of the molting cycle. We suggest that U. cordatus larvae develop disturbances in the molting process similar to the MDS described for other species and that these disturbances are related to a more complex pathway involving the emergence of larval stage zoea VI.

Conditions and practices in the commercialisation of innovations in wood industry

The report 'Conditions and practices in the commercialisation of innovation in wood industry' has been written as a part of the Wood Academy project. The report analyses the commercialisation conditions and practices of wood industry by utilising product categorisation based on a conceptual schema which combines the aspects of the transfer of the procession of utility and the degree of form/service utility (or value-added) created or provided by the company. Open innovation approaches help to perceive the possible new product and service innovations as well as the new business models and earning logics in the industry. The report also contains brief company cases to demonstrate theory-to-practice and showcase company examples from successful Finnish companies.