Sensor-based Control of Chewing and Rumination Behavior of Dairy Cows

The measurement of feed intake, feeding time and rumination time, summarized by the term feeding behavior, are helpful indicators for early recognition of animals which show deviations in their behavior. The overall objective of this work was the development of an early warning system for inadequate feeding rations and digestive and metabolic disorders, which prevention constitutes the basis for health, performance, and reproduction. In a literature review, the current state of the art and the suitability of different measurement tools to determine feeding behavior of ruminants was discussed. Five measurement methods based on different methodological approaches (visual observance, pressure transducer, electrical switches, electrical deformation sensors and acoustic biotelemetry), and three selected measurement techniques (the IGER Behavior Recorder, the Hi-Tag rumination monitoring system and RumiWatchSystem) were described, assessed and compared to each other within this review. In the second study, the new system for measuring feeding behavior of dairy cows was evaluated. The measurement of feeding behavior ensues through electromyography (EMG). For validation, the feeding behavior of 14 cows was determined by both the EMG system and by visual observation. The high correlation coefficients indicate that the current system is a reliable and suitable tool for monitoring the feeding behavior of dairy cows. The aim of a further study was to compare the DairyCheck (DC) system and two additional measurement systems for measuring rumination behavior in relation to efficiency, reliability and reproducibility, with respect to each other. The two additional systems were labeled as the Lely Qwes HR (HR) sensor, and the RumiWatchSystem (RW). Results of accordance of RW and DC to each other were high. The last study examined whether rumination time (RT) is affected by the onset of calving and if it might be a useful indicator for the prediction of imminent birth. Data analysis referred to the final 72h before the onset of calving, which were divided into twelve 6h-blocks. The results showed that RT was significantly reduced in the final 6h before imminent birth.

Ventilation effects on humidity measurements in thermometer screens

Relative humidity (RH) measurements, as derived from wet-bulb and dry-bulb thermometers operated as a psychrometer within a thermometer screen, have limited accuracy because of natural ventilation variations. Standard RH calculations generally assume a fixed screen psychrometer coefficient, but this is too small during poor ventilation. By comparing a reference humidity probe—exposed within a screen containing a psychrometer—with wind-speed measurements under controlled conditions, a wind-speed correction for the screen psychrometer coefficient has been derived and applicable when 2-metre wind speeds fall below 3 ms–1. Applying this to hourly-averaged data reduced the mean moist RH bias of the psychrometer (over the reference probe) from 1.2% to 0.4%, and reduced the inter-quartile range of the RH differences from 2.0% to 0.8%. This correction is particularly amenable to automatic measurement systems.

Responsabilidade social de uma empresa : o caso da Souza Cruz S.A. conforme a ótica de seus gerentes

A busca de um negócio sustentável leva as empresas cada vez mais a se preocuparem com todos os envolvidosna sua cadeia produtiva.Desta forma, o tema responsabilidadesocial vem ganhando terreno. Embora seja uma matéria relativamente nova no Brasil, várias empresas estão procurando estruturar e desenvolver seus programas de responsabilidade social. O presente estudo de caso procurou analisar a responsabilidade social da empresa com foco na Souza Cruz S. A. Através da percepção de diversos stakeholders, procurou-se agregar à empresa subsídios para avaliação e melhoria do programa, bem como contribuir para um aprofundamentosobre o status atual do tema por meio da análise de uma situação concreta.O trabalho analisou o programa corporativo a partir de seis dimensões, a saber: valores e transparência; público interno; meio ambiente; fornecedores; comunidade; consumidores. . Dentre os resultadosobtidos,verifica-seque os gerentespercebema organizaçãocomo socialmente responsável, embora demandem maior participação e envolvimento dos mesmos na estratégia corporativa. Os demais grupos de stakeholders pesquisados, comunidade, sindicado e fornecedores, apontam para uma baixa comunicação do programa por parte da empresa e a necessidade de uma maior participação da empresa na comunidade. De maneira geral, verificou-se que existe um programa de responsabilidade social sendo implantado, este carece de melhorias e que a empresa está desenvolvendoestratégias de negócio e um sistema de planejamento focado em fortalecer a responsabilidade social corporativa. Além disso, procura implantar instrumentos adequados de acompanhamento e monitoramento de suas práticas.

A dinâmica do pensamento geométrico :aprendendo a enxergar meias verdades e a construir novos significados

This work is a case study to investigate the dynamics of the historians thought as they produce a knowledge about the history of the area measurement systems as forms of historical expressions and representations. We refer to some of the ideas of David Bohm (1989, 1992, 1994, 1996) to support our theoretical understanding about the operation of thought. We chose a period that is recognized by the theorists as the origin of the geometrical thought -embracing the knowledge developed by the Egyptians, Babylonians, Chinese, Hindus, Greeks and Romans- and is referred to as containing a cycle in the development of this knowledge, described as beginning, apogee and decline. We assume this history, as told by the theorists, as a version that we organize and tell with the help of three sets of categories. The first refers to the elements that take part in the measurement practices; the second refers to the historians understanding about the development of the scientific knowledge. This exercise allowed us to extract the theorists main beliefs, that we criticized in the light of the knowledge about Cubação (Dal Pian, 1990). We stress the importance of the methodological approach adopted in this study to the teaching of Geometry and its history

Construção e implementação do Balanced Scorecard em uma organização educacional: o caso do Serviço Nacional de Aprendizagem Comercial do Rio Grande do Norte SENAC RN

The changes that have taken place in the organizational environment in recent decades have led to new performance measurement systems being proposed, given the inadequacy of traditional models. The Balanced Scorecard (BSC) emerged as an instrument to translate financial and non-financial assets into real values for all interested parties in the organization, allowing the introduction of strategies to achieve the desired goals. Research shows that most errors committed with the use of this method are related to the implementation process. Thus, the aim of this dissertation is to analyze the process of building and implementing the BSC in an organization. This empirical exploratory study is based on the classic case study method, which enables the researcher to work with a set of evidence, including direct observation, interviews and document analysis. The results show that the use of BSC in the company investigated posed problems during the process of building and implementing the method. These problems were caused mainly by the lack of involvement on the part of upper management and the team s scant knowledge of Balanced Scorecard. One of the gains obtained from adopting the system was the introduction and/or consolidation of a culture of strategic planning and participative management. The continuous implementation phase was highlighted in the monitoring program, created by the organization in an attempt to reverse existing problems, using the BSC as a third generation strategic management system, which led to significant gains, better use of the system and stronger management practices

Projeto de um sistema emulador de escoamentos e vaso de separação primária

The purpose of this study was to develop a pilot plant which the main goal is to emulate a flow peak pressure in a separation vessel. Effect similar that is caused by the production in a slug flow in production wells equipped with the artificial lift method plunger lift. The motivation for its development was the need to test in a plant on a smaller scale, a new technique developed to estimate the gas flow in production wells equipped with plunger lift. To develop it, studies about multiphase flow effects, operation methods of artificial lift in plunger lift wells, industrial instrumentation elements, control valves, vessel sizing separators and measurement systems were done. The methodology used was the definition of process flowcharts, its parameters and how the effects needed would be generated for the success of the experiments. Therefore, control valves, the design and construction of vessels and the acquisition of other equipment used were defined. One of the vessels works as a tank of compressed air that is connected to the separation vessel and generates pulses of gas controlled by a on/off valve. With the emulator system ready, several control experiments were made, being the control of peak flow pressure generation and the flow meter the main experiments, this way, it was confirmed the efficiency of the plant usage in the problem that motivated it. It was concluded that the system is capable of generate effects of flow with peak pressure in a primary separation vessel. Studies such as the estimation of gas flow at the exit of the vessel and several academic studies can be done and tested on a smaller scale and then applied in real plants, avoiding waste of time and money.

MIGRATION MEASUREMENTS FROM PLASTIC PACKAGING: A SIMULATION STUDY ON INFLUENCE OF INITIAL CONCENTRATION PROFILE

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Medição de desempenho organizacional nas imobiliárias: um estudo na cidade do Natal-RN

The purpose of this paper is to identify how real estate companies from the city of Natal measure their organizational performance. Traditionally these companies measure their performance using financial measures; however, the technological improvement, the internationalization of the economy and the change in consumer behavior all demand better products and services, and other measuring models. Those changes motivate organizations to continually improve the quality of their products and services. In this way, these companies need to associate their financial results to their global performance. Therefore, it is necessary to have organizational performance models that associate financial and non-financial measures to the strategies of the companies. The research also tries to identify which performance indicators are used by these companies, as well as to test a model who questions: a) if there is any relationship between managers´ characteristics and performance measuring systems´ characteristics; b) if there is any relationship between the company s characteristics and the characteristics of the measuring system used to evaluate its organizational performance and c) finally to verify if there is a relationship between the characteristics of the measuring system and the company s performance. The information which served as a basis for the study was obtained through an empirical research, with questionnaires, answered by 66 (sixty six) companies from the city of Natal, capital of the state of Rio Grande do Norte. The results show that none of the companies investigated use any of the performance measurement models proposed in the modern literature. However, they use on an isolated way some of the measures those models, including some measures from adopted in the Balanced Scorecard, as well as the benchmarking process, making comparisons with the performance of their competitors. The research also reveals that either bigger companies, companies with more experienced managers or with better performance show better performance measurement systems

Utilização de indicadores financeiros e não-financeiros na gestão de hotéis no Rio Grande do Norte: um estudo sob a ótica do Balanced Scorecard

This study presents the results of a research on the use of financial and non-financial performance indicators used by medium and large hotels. The research was conducted in Rio Grande do Norte, a Brazilian State. The objective is to identify the usage of performance measures by these companies. Hotel industry is one of the most important sectors in the Rio Grande do Norte economy. The research takes the Balanced Scorecard as a conceptual framework, since it represents an original contribution to the literature of managerial accounting, for rethinking old issues, pointing out themes that were forgotten or badly interpreted, to discuss the requirements imposed by the economy environment, dominated by competitive companies, and increasing the understanding of the relationship between strategy and operation. The objective of the research is to investigate if the hotel managers make use of a managerial information system or not, when evaluating the performance of their business unit. The research reveals the usage of performance evaluation using a large variety of measures. Among them is worth mention: the usage of accounting profit altogether with the EVA/MVA, the process cycle time, total quality management, process transformation, strategic mission, vision, strategic measures, measures related to feedback, risk, costs, productivity, incomes, customers retention, customer satisfaction and profitability, measures using time as a component, quality of the process, cost of the processes, employees capabilities, information systems, motivation, empowerment and alignment. The research leads to the conclusion that the usage of the deriving concepts of Balanced Scorecard can improve the performance measurement systems used by hotels

Primary tooth length determination in direct digital radiography: An in vivo study

Purpose: the purpose of this in vivo study was to compare the accuracy of primary incisor length determined by direct digital radiography (straight-line measurement and grid superimposition) and measurement of the actual tooth length. Methods. Twenty-two primary maxillary incisors that required extractions were selected from 3- to 5-year-old children. The teeth were radiographed with an intraoral sensor using the long cone technique and a sensor holder (30-cm focus-to-sensor distance). The exposure time was 03 seconds. Tooth length was estimated by using straight-line and grid measurements provided by the distance measurement feature of the Computed Dental Radiography digital dental imaging system. The actual tooth length was obtained by measuring the extracted tooth with G digital caliper. Data were analyzed statistically by Pearson's correlation coefficient and a paired t test. Results: There were statistically significant differences (P=.007) between the 2 measurement techniques and between the actual tooth lengths and grid measurements. There was no statistically significant difference (P=38) between straight-line measurements and actual tooth lengths, showing that the straight-line measurements were more accurate. Underestimation of the actual tooth length, however, occurred in 45% of the straight-line measurements and in 73% of the grid measurements. Conclusion: It is possible to determine primary tooth length in digital radiographs using onscreen measurements with 0 reasonable degree of accuracy.

Radial basis function networks with quantized parameters

A RBFN implemented with quantized parameters is proposed and the relative or limited approximation property is presented. Simulation results for sinusoidal function approximation with various quantization levels are shown. The results indicate that the network presents good approximation capability even with severe quantization. The parameter quantization decreases the memory size and circuit complexity required to store the network parameters leading to compact mixed-signal circuits proper for low-power applications. ©2008 IEEE.

Digital versus conventional radiography for determination of primary incisor length

Aim: This in vitro study evaluated the accuracy of primary incisor lengths determined by digital and conventional radiography compared to the actual tooth length. Methods: Twenty extracted primary maxillary incisors were mounted in acrylic blocks. Tooth length was estimated by using a straight-line measurement provided by the distance measurement tool of a digital dental imaging system (Computed Dental Radiography, Schick Technologies Inc.) and conventional E-speed film radiographs by using a digital caliper. Two operators familiar with both radiographic methods performed the estimates. The estimated tooth lengths were compared to the actual tooth lengths measured with the digital caliper. Data were statistically analyzed by Dahlberg's equation, paired t test, Pearson's correlation coefficient and ANOVA at 5% significance level. Results: There were no statistically significant differences (p = 0.85) between tooth length estimated on digital and conventional radiographs. Admitting as clinically acceptable a 0.5-mm discrepancy between the actual tooth lengths and the radiographically estimated lengths, 60% of the radiographic measurements were considered as accurate. When the acceptable difference range was 1.0 mm, the accuracy of the radiographic measurements increased to 100%. Conclusions: Digital and conventional radiography provided similar tooth length measurements and were equivalent to the actual tooth lengths.

Development of a prototype for measuring plantar forces

Studies on the distribution of plantar pressure between the sole of the foot and the ground were developed before the 19th century. Currently, the most often employed plantar pressure measurement systems are Pedar® and FScan®, which have restrictions such as operational difficulty and high cost. In the present study, a device was constructed from two pressure plates capable of measuring plantar forces in discreet areas of the feet at a low cost, using strain-gages attached to sixteen strategic points of the mechanical elements. Sixteen prismatic beams were soldered to each frame, for which the free extremity of each beam represented a specific point of the foot. Two strain gauges were attached to each beam - one near the upper fixed extremity and the other near the lower fixed extremity. Using a Wheatstone bridge electric circuit, the gauges were used to measure the force acting on the extremity of the beam. Precision and accuracy of the prototype was about 10%. In some measurements, accuracy was 2%. The low precision and accuracy were mainly due to the restrictions of the available equipment, which only permitted four measurements at a time. Thus, it was necessary for participants to stand on the plates four separate times, which signified possible changes in the position of the feet on the pressure plates. Despite some limitations, the aim was achieved. The prototype has been used in some studies and represents a contribution to biomechanics, demonstrating the viability of using strain gauges.

Desenvolvimento e implementação de um sistema para detecção de falhas em estruturas usando microcontrolador

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)