998 resultados para Placas e cascas elasticas
Resumo:
The sector of civil construction is strongly related to the red ceramic industry. This sector uses clay as raw material for manufacturing of various products such as ceramic plates. In this study, two types of clay called clay 1 and clay 2 were collected on deposit in Ielmo Marinho city (RN) and then characterized by thermogravimetric analysis (TG/DTG), differential thermal analysis (DTA), X-ray diffraction (XRD), X-ray fluorescence (XRF), rational analysis and particle size distribution and dilatometric analyses. Ceramic plates were manufactured by uniaxial pressing and by extrusion. The plates obtained by pressing were produced from the four formulations called 1, 2, 3 and 4, which presented, respectively, the following proportions by mass: 66.5% clay 1 and 33.5% clay 2, 50% clay 1 and 50% clay 2, 33.5% clay 1 and 66.5% clay 2, 25% clay 1 and 75% clay 2. After firing at 850, 950 and 1050 °C with heating rate of 10 °C/min and soaking time of 30 minutes, the following technological properties were determined: linear firing shrinkage, water absorption, apparent porosity, apparent specific mass and tensile strength (3 points). The formulation containing 25% clay 1 produced plates with most satisfactory results of water absorption and mechanical resistance, because of that it was chosen for manufacturing plates by extrusion. A single firing cycle was established for these plates, which took place as follow: heating rate of 2 °C/min up to 600 ºC with soaking time of 60 minutes, followed by heating using the same rate up to 1050 ºC with soaking time of 30 minutes. After this cycle, the same technological properties investigated in the plates obtained by pressing were determined. The results indicate (according to NRB 13818/1997) that the plates obtained by pressing from the mixture containing 25 wt% clay 1, after firing at 1050 °C, reach the specifications for semi-porous coating (BIIb). On the other hand, the plates obtained by extrusion were classified as semi-stoneware (group AIIa)
Resumo:
O objetivo do estudo foi avaliar as mensurações de cascas de ovos de duas colônias laboratoriais e uma silvestre de P. megistus. de cada uma das colônias, 50 cascas de ovos foram mensuradas por meio de microscópio estereoscópico e sistema de análise de imagem QWin. A análise estatística foi efetuada utilizando o teste t-Student, não pareado no programa INSTAT. A largura, o comprimento e o diâmetro da abertura opercular das cascas de ovos de uma colônia silvestre foram maiores que de duas colônias laboratoriais de P. megistus.
Resumo:
Periodontal infections consist of a group of inflammatory conditions caused by microorganisms that colonize the tooth surface through the formation of dental biofilm. Chronic infections such as periodontitis have been associated to the development and progression of atherosclerosis. AIM: Detect cultivatable and non-cultivatable periodontopathogenic bacteria in atheromatous plaques; search for factors associated to the presence of these bacteria in the atheromatous plaques and characterize the presence of cultivatable and non-cultivatable bacteria in these plaques. METHODOLOGY: A cross-sectional study was performed with a sample of 30 patients diagnosed with atherosclerosis in the carotid, coronary or femoral arteries and surgically treated with angioplasty and stent implant, bypass or endarterectomy. The plaques were collected during surgery and analyzed using the PCR molecular technique for the presence of the DNA of the cultivatable bacteria Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis and Treponema denticola and of the non-cultivatable Synergistes phylotypes. The patients were examined in the infirmary, after the surgery, where they also responded to a questionnaire aimed at determining factors associated to the presence of periodontopathogenic bacteria in the atheromatous plaques. RESULTS: All patients with tooth (66,7%) possessed disease periodontal, being 95% severe and 65% widespread. No periodontopathogenic bacteria were found in the atheromatous plaques. However, four samples (13.3%) were positive for the presence of bacteria. Of these, three participants were dentate, being two carriers of widespread severe chronic periodontite and one of located severe chronic periodontitis. None of them told the accomplishment of procedures associated to possible bacteremia episodes, as treatment endodontic, extraction the last six months or some procedure surgical dental. CONCLUSION: The periodontopathogenic bacteria studied were not found in the atheromatous plaques, making it impossible to establish the prevalence of these pathogens or the factors associated to their presence in plaques, the detection of positive samples for bacteria suggests that other periodontal and non-periodontal pathogens be studied in an attempt at discovering the association or not between periodontal disease and/or others infections and atherosclerosis, from the presence of these bacteria in atheromas
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
O problema tratado neste trabalho consiste em cortar uma placa retangular em peças menores retangulares, de modo que a perda seja minimizada. A placa, entretanto, contém defeitos bem localizados. Propomos uma abordagem em grafo E/OU para representação das soluções possíveis e um método de enumeração implícita para determinar a solução ótima. Resultados computacionais demonstram a efetividade da abordagem.
Resumo:
The genus Stryphnodendron (S.) belongs to the family Leguminosae, subfamily Mimosoideae, which includes mostly trees of tropical and subtropical South America. Extracts of the stem bark are used traditionally by the local population to treat leucorrhoea and diarrhoea, as anti-inflammatory and antiseptic agents (antimicrobial) and to promote blood clotting and wound healing, and in a few cases of gastric ulcers. A review of the literature presented a previous morpho-anatomical study only for S. adstringens (Mart.) Coville. The aim of the present work is to compare morpho-anatomically the stem bark and leaves of three species of Stryphnodendron, known popularly as barbatimão: S. adstringens, S. polyphyllum and S. obovatum, in order to help botanical identification and contribute to quality control. Macro- and microscopical evaluation of the stem barks revealed no significant differences among the species. Morphological analyses of the leaves revealed differences in size, coloration, and pubescence. The leaves of S. adstringens are the largest, glabrous, and concolor. The leaves of S. polyphyllum are smaller, pubescent, and discolor; whereas the leaves of S. obovatum are the same size as those of S. polyphyllum, however, they are glabrous, and discolor.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE
Resumo:
Pós-graduação em Engenharia Mecânica - FEIS
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)