Synthesis of NaA zeolite membrane on a ceramic hollow fiber

NaA zeolite membrane was successfully synthesized on a ceramic hollow fiber with an outer diameter of 400 mum, a thickness of 100 mum and an average pore radius of 0.1 mum. The as-synthesized membranes were characterized by XRD, SEM as well as gas permeation. A continuous C NaA zeolite membrane formed after a three-stage synthesis. The membrane thickness was similar to5 mum. Gas permeation data indicated that a relatively high quality NaA zeolite membrane formed on the ceramic hollow fiber support. (C) 2003 Elsevier B.V. All rights reserved.

Catalytic partial oxidation of n-heptane for hydrogen production

Partial oxidation of n-heptane (POH) for hydrogen generation was studied over several catalysts between 700 and 850degreesC. Modified Ni-based/gamma-Al2O3 catalyst exhibited not only good catalytic activity but also good carbon deposition resistance ability. Under the modified reaction conditions, 100% n-heptane conversion and 93% hydrogen selectivity can be obtained.

Synthesis and gas permeation properties of an NaA zeolite membrane

A high quality NaA zeolite membrane, which shows a H-2/n-C4H10 permselectivity of 106, has been synthesized on a seeded alpha-Al2O3 support by a multistage synthesis method.

Tense, Aspect and the Cognitive Representation of Time

This paper explores the relationships between a computation theory of temporal representation (as developed by James Allen) and a formal linguistic theory of tense (as developed by Norbert Hornstein) and aspect. It aims to provide explicit answers to four fundamental questions: (1) what is the computational justification for the primitive of a linguistic theory; (2) what is the computational explanation of the formal grammatical constraints; (3) what are the processing constraints imposed on the learnability and markedness of these theoretical constructs; and (4) what are the constraints that a linguistic theory imposes on representations. We show that one can effectively exploit the interface between the language faculty and the cognitive faculties by using linguistic constraints to determine restrictions on the cognitive representation and vice versa. Three main results are obtained: (1) We derive an explanation of an observed grammatical constraint on tense?? Linear Order Constraint??m the information monotonicity property of the constraint propagation algorithm of Allen's temporal system: (2) We formulate a principle of markedness for the basic tense structures based on the computational efficiency of the temporal representations; and (3) We show Allen's interval-based temporal system is not arbitrary, but it can be used to explain independently motivated linguistic constraints on tense and aspect interpretations. We also claim that the methodology of research developed in this study??oss-level" investigation of independently motivated formal grammatical theory and computational models??a powerful paradigm with which to attack representational problems in basic cognitive domains, e.g., space, time, causality, etc.

Alkanes-assisted low temperature formation of highly ordered SBA-15 with large cylindrical mesopores

Highly ordered SBA-15 silicas with large cylindrical mesopores (similar to 15 nm) are successfully obtained with the help of NH4F by controlling the initial reaction temperatures in the presence of excess amounts of alkanes.

Analogia w dydaktyce języka chińskiego

W artykule zajmuję się problematyką dydaktyki wybranych konstrukcji języka chińskiego. Moim celem jest pokazanie na przykładach, w jaki sposób, wykorzystując zarówno różnice semantyczne między zdaniami strukturalnie podobnymi, jak i analogie semantyczne między zdaniami składniowo różnymi, ułatwić i przyspieszyć nauczanie problematycznych w tym względzie zagadnień gramatyki chińskiej. Do egzemplifikacji wykorzystania mechanizmów różnic i analogii w dydaktyce wykorzystałem zdania z partykułą le i skopiowanym czasownikiem, konstrukcję z de i dopełnieniem komplementywnym oraz partykułę końcową le.

Urbanisation and sport participation in townships in China

Urbanisation as a phenomenon is a complex social process which can be quite difficult to define and understand. In recent years, urbanisation in China has developed at an ever increasing rate. Urban population rates have now surpassed 50% (figure from 2011). Based on the growing importance placed on the increasing number of urbanised/urbanising townships, the issue of people’s lives within the townships has also become an important feature in regard to the impact that urbanisation is having upon China. Clearly this links China’s urban development to the transformation of sport participation in China. This research aims to examine what the reality of the sport participation on-the-ground is within six selective townships in China and examine the reasons for the reality through the lens of figurational theory. In order to do so, some features of Norbert Elias’s figurational theory (involvement and detachment, power) are employed as the theoretical framework. Two townships in Lüliang of Shanxi province, two townships in Jincheng of Shanxi Province and two townships in Huizhou of Guangdong province were selected in order to answer these key questions. The three cities which the townships are located are in different stages of urbanisation. Semi-structured interview were conducted. The current situation were described from the aspects of age, gender, occupation and income aspects and the transformation of sport participation. This research concludes that the current sport participation situation within these six townships is due to the influences stemming from several aspects: sport policy and sport organisation; economy condition, culture, urbanisation, and self-requirement and individual interest towards sport. This power forms a network of interdependency which also aids our understanding of the current sport participation within these six selected Chinese townships.

Bildungsbericht Dessau-Roßlau 2011

In dem Bildungsbericht [von Dessau-Roßlau] wurden thematische Schwerpunkte festgelegt, die sich weitestgehend auf das formale Lernen in Institutionen beziehen. Thematisch hat der Bildungsbericht die folgenden Schwerpunkte: Elementare Bildung, Allgemeinbildende Schulen, Berufsbildungssystem – Berufsbildende Schulen, Hochschulbildung, Erwachsenenbildung, Weiterbildung und informelles Lernen. Da insbesondere die Übergänge zwischen den Institutionen wichtige Punkte in der Bildungsbiographie sind, werden sie in den jeweiligen Kapiteln kurz anhand ihrer Besonderheiten und Auffälligkeiten beschrieben. Neben der allgemeinen Darstellung der Teilbereiche werden alle Bereiche in Bezug auf drei Einflussfaktoren untersucht: Demographischer Wandel, Soziale Ungleichheit, Geschlechtsspezifische Ungleichheit. Diese drei Themenkomplexe sind als Querschnittsthemen allen Schwerpunkten vorangestellt und beschreiben, welchen Einfluss die jeweiligen Faktoren haben bzw. wie groß ihr Einfluss auf die Teilbereiche ist. (DIPF/Orig.)

Model sensitivity and uncertainty analysis using roadside air quality measurements

Most of the air quality modelling work has been so far oriented towards deterministic simulations of ambient pollutant concentrations. This traditional approach, which is based on the use of one selected model and one data set of discrete input values, does not reflect the uncertainties due to errors in model formulation and input data. Given the complexities of urban environments and the inherent limitations of mathematical modelling, it is unlikely that a single model based on routinely available meteorological and emission data will give satisfactory short-term predictions. In this study, different methods involving the use of more than one dispersion model, in association with different emission simulation methodologies and meteorological data sets, were explored for predicting best CO and benzene estimates, and related confidence bounds. The different approaches were tested using experimental data obtained during intensive monitoring campaigns in busy street canyons in Paris, France. Three relative simple dispersion models (STREET, OSPM and AEOLIUS) that are likely to be used for regulatory purposes were selected for this application. A sensitivity analysis was conducted in order to identify internal model parameters that might significantly affect results. Finally, a probabilistic methodology for assessing urban air quality was proposed.

Modelling air quality in street canyons: a review

High pollution levels have been often observed in urban street canyons due to the increased traffic emissions and reduced natural ventilation. Microscale dispersion models with different levels of complexity may be used to assess urban air qualityand support decision-making for pollution control strategies and traffic planning. Mathematical models calculate pollutant concentrations by solving either analytically a simplified set of parametric equations or numerically a set of differential equations that describe in detail wind flow and pollutant dispersion. Street canyon models, which might also include simplified photochemistry and particle deposition–resuspension algorithms, are often nested within larger-scale urban dispersion codes. Reduced-scale physical models in wind tunnels may also be used for investigating atmospheric processes within urban canyons and validating mathematical models. A range of monitoring techniques is used to measure pollutant concentrations in urban streets. Point measurement methods (continuous monitoring, passive and active pre-concentration sampling, grab sampling) are available for gaseous pollutants. A number of sampling techniques (mainlybased on filtration and impaction) can be used to obtain mass concentration, size distribution and chemical composition of particles. A combination of different sampling/monitoring techniques is often adopted in experimental studies. Relativelysimple mathematical models have usually been used in association with field measurements to obtain and interpret time series of pollutant concentrations at a limited number of receptor locations in street canyons. On the other hand, advanced numerical codes have often been applied in combination with wind tunnel and/or field data to simulate small-scale dispersion within the urban canopy.

Spatial variability of air pollution in the vicinity of a permanent monitoring station in central Paris

The strong spatial and temporal variability of traffic-related air pollution detected at roadside locations in a number of European cities has raised the question of how representative the site and time period of air quality measurements actually can be. To address this question, a 7-month sampling campaign was carried out on a major road axis (Avenue Leclerc) leading to a very busy intersection (Place Basch) in central Paris, covering the surroundings of a permanent air quality monitoring station. This station has recorded the highest CO and NOx concentrations during recent years in the region of Paris. Diffusive BTX samplers as well as a mobile monitoring unit equipped with real-time CO, NOx and O3 analysers and meteorological instruments were used to reveal the small-scale pollution gradients and their temporal trends near the permanent monitoring station. The diffusive measurements provided 7-day averages of benzene, toluene, xylene and other hydrocarbons at different heights above the ground and distances from the kerb covering summer and winter periods. Relevant traffic and meteorological data were also obtained on an hourly basis. Furthermore, three semiempirical dispersion models (STREET-SRI, OSPM and AEOLIUS) were tested for an asymmetric canyon location in Av. Leclerc. The analysis of this comprehensive data set has helped to assess the representativeness of air quality monitoring information.

"System in package technology" - design for manufacture challenges

Purpose – To present key challenges associated with the evolution of system-in-package technologies and present technical work in reliability modeling and embedded test that contributes to these challenges. Design/methodology/approach – Key challenges have been identified from the electronics and integrated MEMS industrial sectors. Solutions to optimising the reliability of a typical assembly process and reducing the cost of production test have been studied through simulation and modelling studies based on technology data released by NXP and in collaboration with EDA tool vendors Coventor and Flomerics. Findings – Characterised models that deliver special and material dependent reliability data that can be used to optimize robustness of SiP assemblies together with results that indicate relative contributions of various structural variables. An initial analytical model for solder ball reliability and a solution for embedding a low cost test for a capacitive RF-MEMS switch identified as an SiP component presenting a key test challenge. Research limitations/implications – Results will contribute to the further development of NXP wafer level system-in-package technology. Limitations are that feedback on the implementation of recommendations and the physical characterisation of the embedded test solution. Originality/value – Both the methodology and associated studies on the structural reliability of an industrial SiP technology are unique. The analytical model for solder ball life is new as is the embedded test solution for the RF-MEMS switch.