Kunnallisen tai seudullisen toimitilahallinnon yhtiöittämisen edut ja haitat

Tutkimuksen aihe liittyy kunnallisten toimitilojen yhtiöittämiskysymykseen, joka on ollut esillä monissa kunnissa useita vuosia ja laajentunut nyt seudulliseksi. Tutkimuksen tavoitteena on tarkastella, mitä hyötyä tai haittaa kunnallisen tai seudullisen toimitilahallinnosta vastaavan yksikön yhtiöittämisestä olisi. Parantaakseen tuottavuutta kunta voi järjestää toimintansa perinteisen kunnallisen organisoinnin sijaan liikelaitoksena tai osakeyhtiönä silloin, kun toiminnan laatu on liiketoiminnan luonteista. Suurin osa kuntien toimitilakiinteistöistä toimii kuntien palvelutuotannon suoranaisena tuotantovälineenä. Kuntien välisen yhteistoiminnan lisääminen voidaan nähdä mahdollisuutena julkisella sektorilla. Sen lisääminen edesauttaa tuottavuuden kasvua ja mahdollistaa palvelujen jatkuvan kehittämisen. Yhtiöittäminen tuo toimintaan mukaan asioita, jotka varmasti tehostavat toimintaa, kuten päätöksenteon nopeutuminen, toiminnan joustavuus, joustava ja kilpailukykyinen henkilöstöhallinto sekä yhtiön toiminnan ja päätösten ei-julkisuus jne. Huonoja puolia yhtiöittämisessä on kuntien kiinteistömenojen mahdollinen nousu käyttötalouspuolella sekä se, että yhtiöllä olisi käytännössä vain muutama asiakas. Suomessa kuntien toimitilahallinto on todennäköisesti menossa kohti yhtiömallia. Vaihtoehtoina yhtiöittämiselle ovat siis liikelaitosmallin kehittäminen ja joissain tapauksissa keskinäinen kiinteistöyhtiömalli. Joka tapauksessa kuntien toimitilahallintoyksiköiden toimintaa ja toimintamallia pitää kehittää, jotta niiden tuottavuus kasvaa sekä toiminta säilyy kannattavana ja järkevänä. Ulkoisten tekijöiden vaikutus kuntien toimitilahallinnon toimintaan kasvaa koko ajan.

Tuoteryhmän kehitysprojektin optimointi

Tämä diplomityö toteutettiin Sammet Dampers Oy:ltä saatuna toimeksiantona. Yritys haluaa yhä parempia tuloksia tuoteryhmien kehitysprojekteista, jolloin se asettaa vaatimuksia kehitysprojekteissa käytettävälle kehitysprosessille. Yrityksen täytyy optimoida ja systematisoida käytettävää menetelmää, jotta näihin parempiin tuloksiin voidaan päästä. Työn ensimmäisenä tavoitteena on optimoida yrityksen käytössä oleva tuoteryhmien kehitysprojekteissa käytettävä prosessimalli. Tavoitteen mukaisesti työssä luodaan uusi optimoitu tuoteryhmien kehitysprosessimalli, joka vastaa yrityksen tarpeisiin. Tämä uusi malli kirjataan osaksi yrityksen toiminnanohjausjärjestelmää. Työn toisena tavoitteena on käyttää uutta optimoitua prosessimallia kellopeltien tuoteryhmän kehitysprojektissa. Tätä kehitysprojektia käytetään samalla uuden prosessimallin sisäänajamiseen osaksi yrityksen toimintoja.Tämän diplomityön puitteissa kellopeltien kehitysprojektista käydään läpi kehitysprojektin ensimmäinen osio eli vaatimustenmäärittelyprosessi ja esitellään sen tuloksena syntynyt toteutussuunnitelma. Työn tuloksena syntyneen uuden tuoteryhmien kehitysprojektin prosessimallin avulla voidaan saavuttaa merkittäviä parannuksia tarkasteltaessa kehitysprojektin tuloksia ajankäytön, laadun ja kustannusten suhteen.

Success factors of commercial open source software projects

Open source and open source software development have been interesting phenomena during the past decade. Traditional business models do not apply with open source, where the actual product is free. However, it is possible to make business with open source, even successfully, but the question is: how? The aim of this study is to find the key factors of successfully making business out of commercial open source software development. The task is achieved by finding the factors that influence open source projects, finding the relation between those factors, and find out why some factors explain the success more than others. The literature review concentrates first on background of open innovation, open source and open source software. Then business models, critical success factors and success measures are examined. Based on existing literature a framework was created. The framework contains categorized success factors that influence software projects in general as well as open source software projects. The main categories of success factors in software business are divided into community management, technology management, project management and market management. In order to find out which of the factors based on the existing literature are the most critical, empirical research was done by conducting unstructured personal interviews. The main finding based on the interviews is that the critical success factors in open source software business do not differ from those in traditional software business or in fact from those in any other business. Some factors in the framework came out in the interviews that can be considered as key factors: establishing and communicating hierarchy (community management), localization (technology management), good license know-how and IPR management (project management), and effective market management (market management). The critical success factors according to the interviewees are not listed in the framework: low price, good product and good business model development.

Future of Newspaper Business Models in Finland

The purpose of this Master’s thesis was to study the business model development in Finnish newspaper industry during the next then years through scenario planning. The objective was to see how will the business models develop amidst the many changes in the industry, what factors are affecting the change, what are the implications of these changes for the players in the industry and how should the Finnish newspaper companies evolve in order to succeed in the future. In this thesis the business model change is studied based on all the elements of business models, as it was discovered that the industry is too often focusing on changes in only few of those elements and a more broader view can provide valuable information for the companies. The results revealed that the industry is affected by many changes during the next ten years. Scenario planning provides a good tool for analyzing this change and for developing valuable options for businesses. After conducting series of interviews and discovering forces affecting the change, four different scenarios were developed centered on the role that newspaper will take and the level at which they are providing the content in the future. These scenarios indicated that there are varieties of options in the way the business models may develop and that companies should start making decisions proactively in order to succeed. As the business model elements are interdepended, changes made in the other elements will affect the whole model, making these decisions about the role and level of content important for the companies. In the future, it is likely that the Finnish newspaper industry will include many different kinds of business models, some of which can be drastically different from the current ones and some of which can still be similar, but take better into account the new kind of media environment.

Analytic evaluation of three-phase short circuit demagnetization and hysteresis loss risk in rotor-surface-magnet Permanent-Magnet Synchronous Machines

Permanent magnet synchronous machines (PMSM) have become widely used in applications because of high efficiency compared to synchronous machines with exciting winding or to induction motors. This feature of PMSM is achieved through the using the permanent magnets (PM) as the main excitation source. The magnetic properties of the PM have significant influence on all the PMSM characteristics. Recent observations of the PM material properties when used in rotating machines revealed that in all PMSMs the magnets do not necessarily operate in the second quadrant of the demagnetization curve which makes the magnets prone to hysteresis losses. Moreover, still no good analytical approach has not been derived for the magnetic flux density distribution along the PM during the different short circuits faults. The main task of this thesis is to derive simple analytical tool which can predict magnetic flux density distribution along the rotor-surface mounted PM in two cases: during normal operating mode and in the worst moment of time from the PM’s point of view of the three phase symmetrical short circuit. The surface mounted PMSMs were selected because of their prevalence and relatively simple construction. The proposed model is based on the combination of two theories: the theory of the magnetic circuit and space vector theory. The comparison of the results in case of the normal operating mode obtained from finite element software with the results calculated with the proposed model shows good accuracy of model in the parts of the PM which are most of all prone to hysteresis losses. The comparison of the results for three phase symmetrical short circuit revealed significant inaccuracy of the proposed model compared with results from finite element software. The analysis of the inaccuracy reasons was provided. The impact on the model of the Carter factor theory and assumption that air have permeability of the PM were analyzed. The propositions for the further model development are presented.

Quantitative refinement of reaction-based biomodels

In the field of molecular biology, scientists adopted for decades a reductionist perspective in their inquiries, being predominantly concerned with the intricate mechanistic details of subcellular regulatory systems. However, integrative thinking was still applied at a smaller scale in molecular biology to understand the underlying processes of cellular behaviour for at least half a century. It was not until the genomic revolution at the end of the previous century that we required model building to account for systemic properties of cellular activity. Our system-level understanding of cellular function is to this day hindered by drastic limitations in our capability of predicting cellular behaviour to reflect system dynamics and system structures. To this end, systems biology aims for a system-level understanding of functional intraand inter-cellular activity. Modern biology brings about a high volume of data, whose comprehension we cannot even aim for in the absence of computational support. Computational modelling, hence, bridges modern biology to computer science, enabling a number of assets, which prove to be invaluable in the analysis of complex biological systems, such as: a rigorous characterization of the system structure, simulation techniques, perturbations analysis, etc. Computational biomodels augmented in size considerably in the past years, major contributions being made towards the simulation and analysis of large-scale models, starting with signalling pathways and culminating with whole-cell models, tissue-level models, organ models and full-scale patient models. The simulation and analysis of models of such complexity very often requires, in fact, the integration of various sub-models, entwined at different levels of resolution and whose organization spans over several levels of hierarchy. This thesis revolves around the concept of quantitative model refinement in relation to the process of model building in computational systems biology. The thesis proposes a sound computational framework for the stepwise augmentation of a biomodel. One starts with an abstract, high-level representation of a biological phenomenon, which is materialised into an initial model that is validated against a set of existing data. Consequently, the model is refined to include more details regarding its species and/or reactions. The framework is employed in the development of two models, one for the heat shock response in eukaryotes and the second for the ErbB signalling pathway. The thesis spans over several formalisms used in computational systems biology, inherently quantitative: reaction-network models, rule-based models and Petri net models, as well as a recent formalism intrinsically qualitative: reaction systems. The choice of modelling formalism is, however, determined by the nature of the question the modeler aims to answer. Quantitative model refinement turns out to be not only essential in the model development cycle, but also beneficial for the compilation of large-scale models, whose development requires the integration of several sub-models across various levels of resolution and underlying formal representations.

Digitalisaatio ja kuljettajakoulutusyrittäjyys

Digitalisaation myötä myös liikenteestä tulee yhä älykkäämpää. Valtiovalta purkaa sääntelyä ja sallii digitaalisten menetelmien laajempaa käyttöä. Kuljettajakoulutusta pidetään toimialana kuitenkin hyvin konventionaalisena. Diplomityön tarkoituksena on tutkia, mitä digitalisaatio tarkoittaa kuljettajakoulutusyritysten liiketoimintamalleille. Empiiristä aineistoa saatiin teemahaastatteluin ja aineistoa analysoitiin laadullisin menetelmin. Työssä esitellään alan vahvuudet, heikkoudet, mahdollisuudet ja uhat sekä tulevaisuuden skenaariot. Digitalisaatio aiheuttaa merkittäviä muutoksia kuljettajakoulutusalan yrityksille. Auto ei ole enää entisenlainen statussymboli eikä rahan käytön kohde. Digitaaliajan ihmiset eivät aina kaipaa fyysistä liikkumista, kun vielä kivijalkakaupatkin vähenevät. Ajokorttia ei useinkaan koeta välttämättömäksi aikuistumisriitiksi. Uusi teknologia voi kuitenkin radikaalisti parantaa alan yritysten suorituskykyä: palvelut muuttuvat ajasta ja paikasta riippumattomiksi sekä skaalautuviksi. Kuluttajien kannalta digitalisaatio puolestaan parantaa asiakaslähtöisyyttä. Alan liiketoimintamallien kehittymiseen vaikuttaa neljä taustavoimaa: digitalisaatio, perinteet, sääntely ja yrittäjyys. Liiketoimintamalli sisältää opetukselliset ydintoiminnot, sisäiset prosessit, liiketoiminnan tukitoiminnot ja arvoehdotuksen asiakkaalle. Liiketoiminnan kehittäminen vastaamaan digitalisaation vaatimuksia edellyttää proaktiivista innovaatiostrategiaa. Siihen perustuvien innovaatiomenetelmien avulla yritys voi kehittää liiketoimintamalliaan digitalisaation tarjoamien ja tiedon asymmetriasta kumpuavien mahdollisuuksien hyödyntämiseksi.

Performance Degradation Modelling and Techno-Economic Analysis of Lithium-Ion Battery Energy Storage Systems

Transmission system operators and distribution system operators are experiencing new challenges in terms of reliability, power quality, and cost efficiency. Although the potential of energy storages to face those challenges is recognized, the economic implications are still obscure, which introduce the risk into the business models. This thesis aims to investigate the technical and economic value indicators of lithium-ion battery energy storage systems (BESS) in grid-scale applications. In order to do that, a comprehensive performance lithium-ion BESS model with degradation effects estimation is developed. The model development process implies literature review on lifetime modelling, use, and modification of previous study progress, building the additional system parts and integrating it into a complete tool. The constructed model is capable of describing the dynamic behavior of the BESS voltage, state of charge, temperature and capacity loss. Five control strategies for BESS unit providing primary frequency regulation are implemented, in addition to the model. The questions related to BESS dimensioning and the end of life (EoL) criterion are addressed. Simulations are performed with one-month real frequency data acquired from Fingrid. The lifetime and cost-benefit analysis of the simulation results allow to compare and determine the preferable control strategy. Finally, the study performs the sensitivity analysis of economic profitability with variable size, EoL and system price. The research reports that BESS can be profitable in certain cases and presents the recommendations.

SUPPLY CHAIN MANAGEMENT IN INDIAN PETROLEUM REFINING INDUSTRY

Model development for selection of location for refinery in India and identification of characteristics to be looked into when configuring it and to develop models for integrated supply chain planning for a refinery. Locating and removing inbound, internal and outbound logistic problems in an existing refinery and overall design of a logistic information system for a refinery are the main objectives of the study. A brief description of supply chain management (SCM), elements of SCM and their significance, logistics cost in petroleum industry and its impacts, and dynamics of petroleum its logistic practices are also to be presented. Scope of application of SCM in petroleum refinery will also be discussed. A review of the investigations carried out by earlier researches in the area of supply chain management in general and with specific reference to petroleum refining.

Towards Grid-Wide Modeling and Simulation

Modeling and simulation permeate all areas of business, science and engineering. With the increase in the scale and complexity of simulations, large amounts of computational resources are required, and collaborative model development is needed, as multiple parties could be involved in the development process. The Grid provides a platform for coordinated resource sharing and application development and execution. In this paper, we survey existing technologies in modeling and simulation, and we focus on interoperability and composability of simulation components for both simulation development and execution. We also present our recent work on an HLA-based simulation framework on the Grid, and discuss the issues to achieve composability.

Análisis del proceso que condujo a la construcción del concepto de explotación inserto en el Protocolo para prevenir, reprimir y sancionar la trata de personas, incorporado a la legislación colombiana a través de la Ley 800 de 2003

El objetivo de este trabajo de grado es describir una disputa política por el significado del concepto de explotación en el marco de la redacción del “Protocolo para prevenir, reprimir y sancionar la trata de personas, especialmente mujeres y niños”, en el cual se define aquello que se entiende por trata de personas. La construcción de este concepto excluye e invisibiliza otros tipos de explotación comunes en el sistema de producción capitalista contemporánea que pertenecen al universo de violencia objetiva sistémica a través del énfasis en la explotación sexual que hace parte de la violencia subjetiva.

Crop yield reduction in the tropics under climate change: Processes and uncertainties

Many modelling studies examine the impacts of climate change on crop yield, but few explore either the underlying bio-physical processes, or the uncertainty inherent in the parameterisation of crop growth and development. We used a perturbed-parameter crop modelling method together with a regional climate model (PRECIS) driven by the 2071-2100 SRES A2 emissions scenario in order to examine processes and uncertainties in yield simulation. Crop simulations used the groundnut (i.e. peanut; Arachis hypogaea L.) version of the General Large-Area Model for annual crops (GLAM). Two sets of GLAM simulations were carried out: control simulations and fixed-duration simulations, where the impact of mean temperature on crop development rate was removed. Model results were compared to sensitivity tests using two other crop models of differing levels of complexity: CROPGRO, and the groundnut model of Hammer et al. [Hammer, G.L., Sinclair, T.R., Boote, K.J., Wright, G.C., Meinke, H., and Bell, M.J., 1995, A peanut simulation model: I. Model development and testing. Agron. J. 87, 1085-1093]. GLAM simulations were particularly sensitive to two processes. First, elevated vapour pressure deficit (VPD) consistently reduced yield. The same result was seen in some simulations using both other crop models. Second, GLAM crop duration was longer, and yield greater, when the optimal temperature for the rate of development was exceeded. Yield increases were also seen in one other crop model. Overall, the models differed in their response to super-optimal temperatures, and that difference increased with mean temperature; percentage changes in yield between current and future climates were as diverse as -50% and over +30% for the same input data. The first process has been observed in many crop experiments, whilst the second has not. Thus, we conclude that there is a need for: (i) more process-based modelling studies of the impact of VPD on assimilation, and (ii) more experimental studies at super-optimal temperatures. Using the GLAM results, central values and uncertainty ranges were projected for mean 2071-2100 crop yields in India. In the fixed-duration simulations, ensemble mean yields mostly rose by 10-30%. The full ensemble range was greater than this mean change (20-60% over most of India). In the control simulations, yield stimulation by elevated CO2 was more than offset by other processes-principally accelerated crop development rates at elevated, but sub-optimal, mean temperatures. Hence, the quantification of uncertainty can facilitate relatively robust indications of the likely sign of crop yield changes in future climates. (C) 2007 Elsevier B.V. All rights reserved.

Evaluation of two soil carbon models using two Kenyan long term experimental datasets

RothC and Century are two of the most widely used soil organic matter (SOM) models. However there are few examples of specific parameterisation of these models for environmental conditions in East Africa. The aim of this study was therefore, to evaluate the ability of RothC and the Century to estimate changes in soil organic carbon (SOC) resulting from varying land use/management practices for the climate and soil conditions found in Kenya. The study used climate, soils and crop data from a long term experiment (1976-2001) carried out at The Kabete site at The Kenya National Agricultural Research Laboratories (NARL, located in a semi-humid region) and data from a 13 year experiment carried out in Machang'a (Embu District, located in a semi-arid region). The NARL experiment included various fertiliser (0, 60 and 120 kg of N and P2O5 ha(-1)), farmyard manure (FYM - 5 and 10 t ha(-1)) and plant residue treatments, in a variety of combinations. The Machang'a experiment involved a fertiliser (51 kg N ha(-1)) and a FYM (0, 5 and 10 t ha(-1)) treatment with both monocropping and intercropping. At Kabete both models showed a fair to good fit to measured data, although Century simulations for treatments with high levels of FYM were better than those without. At the Machang'a site with monocrops, both models showed a fair to good fit to measured data for all treatments. However, the fit of both models (especially RothC) to measured data for intercropping treatments at Machang'a was much poorer. Further model development for intercrop systems is recommended. Both models can be useful tools in soil C Predictions, provided time series of measured soil C and crop production data are available for validating model performance against local or regional agricultural crops. (C) 2007 Elsevier B.V. All rights reserved.

Marine ecosystem models for earth systems applications: the MarQUEST experience

The MarQUEST (Marine Biogeochemistry and Ecosystem Modelling Initiative in QUEST) project was established to develop improved descriptions of marine biogeochemistry, suited for the next generation of Earth system models. We review progress in these areas providing insight on the advances that have been made as well as identifying remaining key outstanding gaps for the development of the marine component of next generation Earth system models. The following issues are discussed and where appropriate results are presented; the choice of model structure, scaling processes from physiology to functional types, the ecosystem model sensitivity to changes in the physical environment, the role of the coastal ocean and new methods for the evaluation and comparison of ecosystem and biogeochemistry models. We make recommendations as to where future investment in marine ecosystem modelling should be focused, highlighting a generic software framework for model development, improved hydrodynamic models, and better parameterisation of new and existing models, reanalysis tools and ensemble simulations. The final challenge is to ensure that experimental/observational scientists are stakeholders in the models and vice versa.

Generic unified modelling process for developing semantically rich, dynamic and temporal models

Models play a vital role in supporting a range of activities in numerous domains. We rely on models to support the design, visualisation, analysis and representation of parts of the world around us, and as such significant research effort has been invested into numerous areas of modelling; including support for model semantics, dynamic states and behaviour, temporal data storage and visualisation. Whilst these efforts have increased our capabilities and allowed us to create increasingly powerful software-based models, the process of developing models, supporting tools and /or data structures remains difficult, expensive and error-prone. In this paper we define from literature the key factors in assessing a model’s quality and usefulness: semantic richness, support for dynamic states and object behaviour, temporal data storage and visualisation. We also identify a number of shortcomings in both existing modelling standards and model development processes and propose a unified generic process to guide users through the development of semantically rich, dynamic and temporal models.